Folder contents not displayed - Is this a bug or a feature?

If I import a complete folder structure from my harddisk (referenced file mode), I get a neatly reproduced folder structure in the Aperture project window. However, if I click on of the folders, no pictures are displayed in the Aperture browser. Apperently, you have to click on the automatically created albums within the folders to see the pictures.
Am I doing something wrong or is this (another) badly implemented feature of Aperture?

Feature. But not a very good one.

Similar Messages

  • Popup content not displaying after doing a rollback using savepoint feature

    Hello everyone,
    I have a pop up window which has a taskflow embedded as a region. This taskflow has an activity which does the rolling back of changes done in the task flow using the restore save point feature.
    I have a cancel button on the pop up and it is bound to the cancel activity so that when the user clicks on the cancel button, the changes are discarded and the popup is closed(using a managed bean).
    I am able to discard the changes using this feature.
    My problem is when I try to invoke the same popup in the same session, only a very small panel window appears and nothing else.
    This happens only if I do the rollback feature. Just closing the pop up without any changes and reopening works.
    I tried several ways and can't find a solution to this problem. Can any one help ?
    thanks
    AC
    Edited by: user723140 on Nov 25, 2008 1:27 PM

    Hi,
    restore to savepoints happens when you exit the bounded taskflow with a return. So in your case you are actually closing the taskflow, which is not what you should do in a region. This is why it comes up empty. What you can try is to
    - set the popup loading to lazyUncached
    - set the refresh on the region container to ifNeeded
    - set the refresh condition to some value reference that changes with each call to region (e.g. a managed bean that returns the time in ms)
    Not sure if this will re-create the taskflow, but chances are that it does
    Frank

  • Could not register -- is this a bug or a feature?

    On "2012-01-01 12:20" the answer which I was getting for
    What is the output of "date -u +%W$(uname)|sha256sum|sed 's/\W//g'"?
    on my system was different from what was expected by registration.
    I replaced your expression with:
    echo 52Linux|sha256sum|sed 's/\W//g'
    and finally was able to register. Looks to me like a bug in registration.

    It does not look like timezone issue because of '-u' option for 'date'.
    From "man date" (GNU coreutils 8.5 February 2011):
    %W     week number of year, with Monday as first day of week (00..53)
    However I get:
    date -u +%W
    00
    Good that
    info coreutils 'date invocation'
    has valuable addition:
    Days in a new year preceding the first Monday are  in week zero.
    So, it registration does not calculate correct week number. They probably do not use posted expression, or their tool uses is of different version. Probably this issue happens only at the beginning of new year before first Monday.
    Still this could be a hidden quiz for new users...

  • In Portal Content admin Role "Portal content" folder is not displaying

    Hi,
          I created a user in EP and assign Only Content admin Role. But in portal content area "Portal content "folder is not displaying.
    Can someone help me the process steps to achieve it?
    Thanks,
    kundan

    It is because the user has no proper permissions  to the porta content folder.
    you should give atleast read permission to the portal content folder to the content_admin role or to the users who have content admin role.
    also make sure the end user check box is checked at the time of giving permissions.
    Otherwise give eevryone group as read permisisons to the portal content folder. then you can see the portal content folder with read permissiosn only.
    Raghu
    Edited by: Raghavendranath Garlapati on Sep 1, 2009 9:32 AM

  • TOC Topic content not displayed in WYSIWYG Editor

    I use RoboHelp X5. When I click a topic in the TOC pane I
    expect to see its contents displayed in the WYSIWYG Editor. Instead
    the WYSIWYG pane is grey and the TrueCode pane is blank with a
    cursor flashing on the upper left corner!
    I searched for some similar issue on this forum and could not
    find it. However, I did gather that I could use another editor by
    right clicking a topic when in the Project tab and selecting one of
    5-6 editors. I tried RoboHelp TrueCode and was amazed and relieved
    to see the code and content for the topic displayed in the TrueCode
    pane...so I went a step further and tried the WYSIWYG editor and
    wonder of wonders, the topic content was displayed.
    Can someone please tell me what is going on? Should I
    reinstall RoboHelp X5? Why does the topic content not display when
    I click the topic from the TOC tab?

    Welcome to the forum.
    There have been posts about this but maybe your forum search
    history is not set to go back far enough.
    Rather than right click and selecting RH True Code, at the
    bottom of the editing pane there is a true code tab which will
    quickly enable you to see your code is still safe. That said, if
    you then click WYSIWYG, you don't get the view restored, usually.
    Maybe your way has an advantage.
    It's one of those things that happens now and again. I don't
    think reinstalling will help. I have had it happen several times in
    a day and then you go months with it working just fine.
    I don't believe anyone has ever lost any data. At worst you
    just have to close RH and reopen it.
    For what it is worth, I haven't seen this happen in RH7.

  • Utility folder icon not displaying like App folder icon?

    Hi- noticed when I drag the system Utility Folder into the Finder Toolbar it does not display similar to the Applications folder - not the Sidebar, but the horizontal toolbar holding the view option buttons (as a favorite item). The Applications folder displays as the same "A"-type icon as in the Sidebar, but the Utilities folder displays as a folder, not the "X"-type icon it appears as in the sidebar. This seems nonstandard- I'd like to see what I can do about having it display in the Toolbar as it does in the Sidebar.
    I know, I know, "Why?". I just need to, ok? Otherwise I won't stop thinking about it. Any ideas? Assuming this is the same case for everybody's system, not just mine. I would've posted this in the "OS X System" forum, but it's not really developer related. I'm also guessing this involves going into the icon resources, and making a change to match the resources for the Applications folder, but that's a blind guess. I did a similar change for the slider in iTunes to have it match the Quicktime slider, but not sure in this case, or where to look. Thanks!

    To clarify: This is about how the Utility Folder displays in the Finder Sidebar vs. how it displays in the Finder Toolbar (both shown by selecting "Show Sidebar" and "Show Toolbar" in the Finder "View" pulldown menu.
    Finder Sidebar, Finder Toolbar:
    http://grok.lsu.edu/Article.aspx?articleId=5920
    Any folder can be dragged into either space, and without using the Customize Toolbar option. Just drag and drop the folder.
    Dragging the Utility Folder into the Sidebar displays it correctly, as its specialized, unique crossed-tools icon. However, dragging the Utility Folder into the Toolbar will not, unlike all other folders assigned with those special icons.
    In the Sidebar, certain folders will display as non-folder icons. For instance, under "Places" the Home Folder does not display as a mini Home Folder icon, it displays as a little "house". The Desktop Folder displays as a mini-picture of a Desktop, the Applications folder displays as an "A" made up of a crossed ruler, pencil, and brush.
    This is the same for the Finder Toolbar, when you drag one of those specialized folders into the Toolbar.
    So, on the left side of a Finder window, you have the Sidebar, with its specialized icons (for certain folders, not all) and along the Toolbar (across the top of a Finder window, with its typical column-view buttons) you will also see those same (or other) specialized icons. In all cases, a folder's icon will display the same in the Sidebar as it does in the Toolbar. Except for the Utilities Folder.
    If it isn't already, drag your Utility Folder into the Sidebar, and then, in that same Finder Window, drag it into the toolbar. Not the bar at the top of your monitor screen, but the toolbar of that specific Finder window. You should have the exact same result. The Utility Folder will display as a specialized icon in the Sidebar, but will display as a small version of its original blue folder icon in the Toolbar.
    Message was edited by: Jack Gregory
    Message was edited by: Jack Gregory

  • Content Area Privileges : Is this a bug

    We have the following scenario:
    1.Create content area 'con' as portal30.
    2. Assigned authenticated_users group privileges of 'Make Public' on this content area.
    All logged in users can now see all items in this content area.
    Next we
    removed authenticated_users group privileges from this content area.
    However even now all logged in users can see all items in the content area.
    Is this a bug?? Doesn't removing the authenticated_users group privileges prevent all users except portal30 from accessing the content area.
    Thanks
    Sudip

    Sudip,
    Check the root folder properties of your 'Con' CA and make sure that you have 'unchecked' the 'Make Public' checkbox.
    Regards,
    Luke Duc Lam

  • Download folder does not display downloaded files; nor ask destination

    When I download a file, the Download folder opens but does not display the downloaded file. If I set the option to Ask for destination, it doesn't ask, just opens the Download folder with nothing displayed. This is happening on two machine.
    Thanks for the help.

    If you want to keep a file that is opened in an external program then you either need to save it in the program if it permits or use "Save Link As" in the right-click to save the file. Files opened in an external program are never guaranteed to stay in the location, so editing a text file of other file that is opened in a program and save it under the same name will likely cause you to lose this edit.

  • All SYFY online on demand has error "Content not available from this domain"

    I keep getting an error on any SYFY online on demand shows which says "Content not available from this domain." This applies to any show from SYFY that I click on to test.  Other channels don't have that error.

    Hi,
    Thanks for bringing this issue. Yes, the message should be SEVERE. This will be fixed.
    You may also want to subscribe to [email protected] and bring up any issues, enhancements.
    Regards,
    Deepak

  • Folder links not displaying

    Hello everyone,
    We have EP SP9 and if I navigate to Content Management -> Explorer -> Documents. I do not see the folder names as a hyper link - only the little black triangle and check box icons appear. If I place the cursor at an icon I get the help that shows up that displays the folder name such as system, Discussions, Links, etc... But I do not see the folder name as a link. Has anyone ever seen this before?
    This happens anywhere you can see folders, not just the above navigation.
    Thanks,
    Bert

    Darin,
    I have been thinking the same thing that it may be a permission problem - we have a sandbox portal installed in the same manner and the links are displayed correctly there. It does not display the folder as plain text. There is nothing there except a check box icon. When you position the cursor at the icon then the folder name appears briefly.
    Thanks,
    Bert

  • Content not displaying.

    I built a login form and put an Application.cfc file in the folder i want to restrict and it's not displaying the simple text i put in the index.cfm for testing purposes.
    ======= Application.cfc code (in folder name "admin_section")==========
    <cfcomponent>
      <cffunction name="onRequest">
        <cflogin>
          <cfif IsDefined("FORM.Login_btn")>
            <cfquery name="qLogin" datasource="poll">
            SELECT UserLogin, UserPassword, UserRoleID
            FROM Users
            WHERE UserLogin = <cfqueryparam value="#FORM.UserName#" cfsqltype="cf_sql_varchar">
            AND UserPassword = <cfqueryparam value="#FORM.Password#" cfsqltype="cf_sql_varchar">
            </cfquery>
            <cfif FORM.username IS "#qLogin.UserLogin#" AND FORM.password IS "#qLogin.UserPassword#">
              <cfloginuser name="#FORM.username#"
                           password="#FORM.password#"
                           roles="#qLogin.UserRoleID#">
            <cfelse>
            <cfset request.errorMsg = "Incorrect login; please try again">
              <cfinclude template="../login/login.cfm">
                <cfreturn>   
            </cfif>
          <cfelse>
            <cfinclude template="../login/login.cfm">
              <cfreturn>
          </cfif>
            </cflogin>
      </cffunction>
    </cfcomponent>
    ======= Application.cfc End =======
    ====== Login Form (in folder name "Login" ====
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    </head>
    <body>
    <cfform action="../admin_section/" method="post">
      <table width="250">
      <tr align="center">
        <td colspan="2">
          <cfif IsDefined('Request.errorMsg')>
            <cfoutput>#Request.errorMsg#</cfoutput>
          <cfelse>
            Please Log in.
          </cfif>
        </td>
      </tr>
        <tr>
          <td>
            <font size="-1">User Name:</font>
          </td>
          <td>
            <cfinput type="text"
                     name="UserName"
                     required="yes"
                     message="- You must enter a user name!">
          </td>
        </tr>
        <tr>
          <td>
            <font size="-1">Password:</font>
          </td>
          <td>
            <cfinput type="password"
                     name="Password"
                     required="yes"
                     message="- You must enter a password!">
          </td>
        </tr>
        <tr>
          <td> </td>
          <td>
            <cfinput type="submit" name="login_btn" value="Log me in!" >
          </td>
        </tr>
      </table>
    </cfform>
    </body>
    </html>
    It takes me to the page, but nothing displays. Again i have simple text for testing purposes.
    Any help would be great.

    Your problem is that you're using onRequest, which replaces the default page rendering event. There are two ways you could fix this.
    1. Use onRequestStart instead. This will happen before your page is processed, rather than instead of your page being processed. This is the approach I'd recommend.
    2. Add code at the bottom of your onRequest to include the page to be processed. You'd identify this page by using the targetPage argument and including it:
    <cffunction name="onRequest">
         <cfargument name="targetPage" required="true">
         <cfinclude template="#targetPage#">
    </cffunction>
    Dave Watts, CTO, Fig Leaf Software
    http://www.figleaf.com/
    http://training.figleaf.com/

  • Business Workplace Inbox : Mail Content Not Displayed

    Friends,
    We have a problem in displaying contents of the mail(SAP Inbox) in one of the PC's. When we reply w/refernce to that message the content is displayed properly. And also the same mail content is displayed properly in another PC's for the same user.
    We thought this is a GUI problem and re-installed SAP GUI(all components) but still the issue exists.
    Any other settings are required to be done to solve this problem? Can anyone please help us solving the issue?
    Note: we are using SO_DOCUMENT_SEND_API1 for creating the mail notification and the content is passed as 'RAW'.
    Thank you very much for your help and suggestions.
    Cheers,
    MS
    Message was edited by: Srinivasa Maram

    Srinivas,
    1) Is the problem only with the message being sent through custom code using SO_DOCUMENT_SEND_API1? What happens if you send a message using SAPOffice?
    2) Are the patch levels of the GUI same on both machines? Are you sure both PCs are configured exactly the same? Especially wrt to Windows & IE patches. I vaguely remember there were some issues a while ago with some IE patches. Normally in most client environments the desktops upgrades are controlled centrally and users do not have admin rights. Make sure the user has not done upgrades/installs on the PC in question. If that were the case the PC may needs to be reimaged.
    BTW - What version  are you on R/3 and SAPGUI?
    Regards,
    Ramki Maley

  • "BI Content" not displayed in RSA1

    Hello Folks,
    i have a newly installed SAP BW 7.31 with BI_CONT 747 Patch 3. When opening RSA1 the branch "BI Content" is not displayed, therefore no BI Content can be installed.
    Do i we have to activate anything? or are there any special options in SPRO to enable this area?
    When we use Txn RSORBCT, the branch "BI Content" is displayed, but there is no tree below...
    Thanks in advance
    --MIKE

    Hi Mike,
    Uncheck tick mark using transaction RSOCONTENT @ System is a Content Dev sys
    Better rise ticket to BASIS team, they help better.
    - vijay

  • Iframe contents not displaying in FF Windows 7 or Mac

    I've read almost all posts about frames not displaying in FF, however, I have an odd issue. While I am able to get the iframe to display, NOT ALL of its contents is displaying. It's odd. A sample page is below, click on the virtual tour tab and you will see what I mean. All the code does show up. This also happens for another page with similar type of code. This works fine in Chrome/IE both PC and Mac. Any help would be appreciated.
    Thanks
    http://www.kdnovelties.com/educational/terrance-the-giraffe/personalized_293.html

    The content is there, but is hidden with display:none style rule, so it looks that if there is script running to show this content then it doesn't finish properly.
    <pre><nowiki><div id="virtualbook" class="kdnbook" style="height: 465px; width: 680px; display: none; margin: auto;"></div></nowiki></pre>
    Removing the display:none makes the book appear for me.
    The Web Console also shows an error with the MP3 file:
    <pre><nowiki>HTTP "Content-Type" of "audio/mpeg" is not supported. Load of media resource http://26ebe445280acec2e3b0-023df79dc48add581f4e26895345aac6.r54.cf1.rackcdn.com/page-flip.mp3 failed.</nowiki></pre>

  • Mail.app does import folder items and items in folder are not displayed

    I had a hard drive crash on my G4 Powerbook. I installed a new harddrive and recovered the data from the old drive....hurrah.... but in a folder I store all my various internet information email(receipts, program info etc) I lost all the emails. I found them in the folder but they aren't shown in the program. I took the backup folder and tried to import them to the folder. Still they don't show up. Should I reinstall mail????

    HI, thanks for the help in the past. I've tried several methods of fixing my "lost mail" problem. Once again, I had a hard drive crash replaced the hard drive and copied back the mailbox folders in the library path so MAIL could find them. 2 mailboxes had some messages displayed but not all. I found this out by clicking on the files under the xxxx folder with the emix extension. New messages existed that were not displayed in Mail under the xxxx folder. I tried rebuilding...this was a mistake because NO messages appeared. I tried importing from different back ups and some messages displayed but again, not all of the messages with the emix extensions. I can click on individual emix files and they display but are not searchable nor displayable in MAIL. I tried importing messages but import only worked when I only had the mbox file in the xxxx folder however still not all of the emix files were displayed.
    My question is now very much more direct: how do I import the emix files back into mail so they are displayed. Click and drag does not work.
    Thanks
    PowerBook G4 titanium G5 Dual 2.5 PowerPC   Mac OS X (10.4.8)  

Maybe you are looking for