Folder is no longer in this location? But Folder Still There

I have Windows 7 and PrE 9. I was working on a folder/project on an external drive and had no problem accessing the avi or other folders in the drive. Once I was satisfied I no longer needed the project (about 14 GB) I deleted the project. I got a pop up window saying the folder was no longer in this location. What the heck? I was just working on it. I checked the folder again, everything was still there and functional. I then tried to cut and paste the folder to my main drive to see if I could delet it from there.
It started out as a normal transfer of files and then gave the message that the folder being transferred was no longer in that location. Ok. I rechecked the Project folder and it was still there but....All of the folders inside were gone except a Stop Capture folder of Zero bites. It still says the folder isn't there lol. Even though it says Zero bites I would like to get rid of this folder and the stop capture folder inside. I had two other projects right next to the one still there and they deleted fine.
Is this a Windows 7 thing and have you guys had this happen? I have one other folder on my desktop from a couple years back with the same scenario. Says its not there so I can't delete it. I just labeled it "can't get rid of this folder" and gave up but it still bugs me. Now I have another one.
Thanks

ATR,
I should have labeled this post "Could Not Find This item" or Item Not Found
Problem solved. I downloaded 7-zip version 9.22 beta from sourceforge (for whatever reason- just seemed good) There are other places to download from. Choose your favorite.
Here is a screenshot of my problem folder so that if others run into this problem 7zip may work for them.
I had a tussle with 7zip and it did not work to begin with, but the problems turned out to be really simple. My nephew is a computer wiz and came over to use the DOS procedure that people are using on the internet to delete the folder. At first he couldn't get it to work. Then we discovered there were 3 folders, one inside the stop motion capture, the stop motion capture, and the outer project folder. The folders had to be deleted from the innermost first, one at a time, to the outer folder. Hallelujah. This folder is gone after 2 years of staring at me.
If you have this message like I did the first thing to do is go into the main folder to the innermost items and delete as many as will delete normally thru windows. Keep deleting the inner folders til you get to the first one that won't delete. Then see how many folders inside the main folder remain.
So let's try 7zip again. I am a newbie so I thought others might like how my nephew and I did it.
In the main window there will be a short list on the left starting with computer and accessable drives. Double click on computer (or whichever location your trouble folder is in). A bigger list of stuff will show up. Mine was in the desktop so I double click on that. I look at that list fo find my trouble folder. Double click on that. Each time you double click will go to the next internal folder. Then when you get to the innermost folder rename it ( we just used the word del). Up higher on the screen is the red delete X click on that. the folder will be gone. To get to the next folder use the green "up one level" arrow just to the left of the url bar. The next folder will show up, rename and press X to delete. When you have reached the outer folder which you thought was your problem folder it will dissapear from your desktop ( or wherever it was located). In my case I had to delete 3 folders. My other problem folder was in my external drive so I just went through the same procedure after double clicking on the drive letter which was in the list in the starting window. Exit 7-zip when done.
You don't have to close 7-zip to delete the folders as I listed in my previous posts. These were just info I got from a couple of websites. Not complete by any means. They presume you know what you are doing with computers.
The only reason I started this discussion was because both of these folders were made with PrE7 and PrE9. I have never had this problem with anything else. Must be some kind of filing error between PrE and windows.
Hope this helps. The DOS procedure was lengthy and was way above my head but 7-zip only took a few minutes.

Similar Messages

  • HT201364 I have a MacBook Pro 17" that meets all criteria on this list but it still won't let me upgrade... Help.

    I have a MacBook Pro 17" that meets all criteria on this list but it still won't let me upgrade... Help.
    To install Mavericks, you need one of these Macs:
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)  **** Maybe my MacBook Pro is early 2007 ? How do I find that out? ****
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed ***YES
    2 GB or more of memory ***YES
    8 GB or more of available space ***YES
    Last Modified: Nov 6, 2013

    Then your model cannot upgrade to Mountain Lion or Mavericks. That is why you could not download it. You can upgrade to Lion, however.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • HT4906 I have just downloaded Mountain Lion but my iPhoto app cannot be launched as it says the original app cant be found. It takes me to where is says its located but its not there.  What to do?

    I have just downloaded Mountain Lion but my iPhoto app cannot be launched as it says the original app cant be found. It takes me to where is says its located but its not there.  What to do?

    Reinstall it?
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

    I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music

    Use Spotlight Search (the magnifying glass on the top right-hand corner of your menu bar) to locate your music files. Then point iTunes to those files.

  • Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

    Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

    This is a little confusing since you say you have forgotten your password and then the system says you have not entered a password.  Even with an Admin account you must have a password to install software.
    If you are using Mac OS X 10.7 or above, you can change the admin password by restarting holding the Command and R keys, from the menu bar select Utilities, then Terminal.  When the Terminal window opens, at the cursor type exactly:
    resetpassword
    and press Enter.  When the Reset Password window opens, select the internal hard drive, and then the user account.  Type a new password twice, leave the Hint blank, and then Save.  Accept the next dialog that opens, and at the bottom of the Reset Password window agree to resetting the home directory permissions.
    Quit the Reset Password window, go to the apple left side of the menu bar, Restart.
    And you have a new password for your account.

  • TS1559 My iPod is not connecting to the Wi-Fi and it is grayed out, so i can't click it to see what is wrong. I tried what apple says to do if this happens, but it still is not working. What do I do?

    My iPod is not connecting to the Wi-Fi and it is grayed out, so i can't click it to see what is wrong. I tried what apple says to do if this happens, but it still is not working. What do I do?

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    It is frequently a hardware problem and an appointment at the genius bar of an Apple store is in order.

  • I can't open i tunes, I've followed the instructions given on this site but it still won't open

    I can't open I tunes, I've folowed the instructions given on this site but it still won't open. Any alternative suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • My iphone5 has a yellow screen. Turned it off last night but its still there. What should I do?

    I'm at the beach right now then when I was taking pics, the yellow screen appeared. Turned it off last night, but its still there.

    How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.

  • The camera on my ipad cannot be launched,the shutter appears closed and the button for taking a picture is not there. When tryying to use intsgram the message camera cannot be launched appears .tried to restart but problem still there

    My camera is not working .shutter appears closed.tried to restart ipad but problem still there.no problem with photo booth problem with istangram

    Try closing the Camera app via the taskbar and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    And by restart do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear (you won't lose any content, it's the iPad equivalent of a reboot). If not, and if closing the app doesn't fix it, then you could try that.

  • My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

    my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

    If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
    If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
    If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
    Let me know!
    xeni

  • UCS c220 giving long beeps, Hardisk replaced, but status still Unconfigured

    Hello All,
    We have installed a brand new UCS Server for CUCM 10.5 a couple of weeks back. Recently the UCS Server started giving long beep sounds.
    When we check through CIMC we found that the status of the Physical Drive 2 was showing “Foreign Config.” And the health as “Moderate Fault”.
    We have two Hardisks in RAID 0 group and one of those is Physical Drive 2 which has the problem. Pls find the attachment  “Physical Drive 1" and "Virtual Drive 1”.
    We have raised support request with Cisco and successfully replaced the problematic Hardisk yesterday.
    However, the status of the Physical Hardisk  is showing “Un Configured” but the Health status is “Good”.
    The Virtual Drive Info tab the status is still “Severe Fault”  and the Hard drive is showing as “Missing”
    The long beep sound is still there. Pls find the attachment “Physical Drive 2" and "Virtual Drive 2”. for more information.
    Need your help to bring this Hardisk Online from UnConfigured. Do I need to Initialize the Hardisk for inclusion in RAID0?

    Hello Keny,
    Thanks for the reply.
    I shutdown the server and configured Raid 1 through CIMC as the boot drive for VMware and installed VMware and mapped the server from Raid 5  The problem is now fixed.
    Thank you,
    Ifthiquar

  • How can I prevent the open/save file confirmation window popup ? Mine is currently set for "always do this action" but I still get the popup.

    Whenever I "export" a QIF file from my bank I get a File Action confirmation window popup. I have the correct application selected and I have it selected to "open" and "always do this action" but the popup always pops.
    I have checked the applications tab and the correct application is selected.
    How can I prevent the confirmation popup window please ?

    Cheers for the reply.
    I have deleted the rdf file but no difference. I still get the opening file box popup.
    From the resetting download actions link. Both lines in the about:config are missing.
    I have also tried switching the download option for the qif file to use a csr file but that also opens the confirmation box.
    I pulled this from the rdf file
    <RDF:Description RDF:about="urn:mimetype:handler:text/x-qif"
    NC:alwaysAsk="false"
    NC:saveToDisk="false"
    NC:useSystemDefault="false"
    NC:handleInternal="false">
    <NC:externalApplication RDF:resource="urn:mimetype:externalApplication:text/x-qif"/>
    <NC:possibleApplication RDF:resource="urn:handler:local:C:\Program Files\Microsoft Money\System\msmoney.exe"/>
    </RDF:Description>
    <RDF:Description RDF:about="urn:scheme:webcal"
    NC:value="webcal">
    <NC:handlerProp RDF:resource="urn:scheme:handler:webcal"/>
    </RDF:Description>
    <RDF:Description RDF:about="urn:mimetype:externalApplication:text/x-qif"
    NC:path="C:\Program Files\Microsoft Money\System\msmoney.exe"
    NC:prettyName="msmoney.exe" />
    Not sure if that helps.
    Thanks again for the reply

  • Bill went up $25.00 this month but Im still under 2yr contract!

    How can my bill go up $25.00 this month when I still have 7 months left on my 2yr contract????  COUNTING the days til I can cancel !!!

    comcast phone rep said I was signed to an invalid plan found by a recent audit, and that it was discontinued starting aug 1st 2015 so bill is going up. Only took you (comcast) 1.5 yrs to figure it out, now my contract is void so I will be cancelling before aug 1st.

  • Audio waveform disappears when opening file to edit but audio still there

    I recorded an interview in AA and saved it. Had the waveforms there when recording, but after saving, I came back in the next day and opened the file to edit it down and I could hear it, but couldn't see the waveforms. Had this happen a couple of years ago and the guy that fixed it then didn't show me how to do it and he is no longer with the company. Any help?

    This may be a problem with the .pk files associated with the audio recordings.  .pk files store a representation of the waveform for fast display in the application and can safely be deleted so that they are re-generated the next time the files are opened in Audition.
    To try resolving this, open the folder that contains your .WAV recordings and look for the .pk files for each.  It will have a much smaller filesize.  Move these files to a different location or to the Recycle Bin (don't delete them just yet in case there's any confusion about which file is which.)  Then relaunch Audition and open the recordings.  It should regenerate the .pk files and you should be back to normal.

  • 6120c Gallery disappeared but files still there - ...

    Last night I was at a concert (Fantomas/Serj for anyone who's curious ) and filmed for a few minutes on my phone after the camera was full.
    Today when I look into my gallery, EVERYTHING is gone - pics, vids, sound clips, music.
    When I go into my data manager, everything is still there. I can connect to pc suite and store the new images and videos, but none of them show up in the gallery.
    I've tried turning the phone off then on (a few times), removing the memory card, resetting to factory settings with no success.
    Can anyone help me please? 

    Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
    The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
    See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
    tt2

Maybe you are looking for