Folder names do not come up while bundling food apps like Starbucks, Dominos, Open table etc

I am trying to group all the food related apps I have on my iPhone and the folder doesn't give an option to name them. I was grouping Starbucks, Dominos, Opentable and Dunkin Donuts apps.

I am aware of that. When you try to pair say open table with Starbucks app, the suggested name doesn't appear.
I did have a workaround, where I created a folder with some other two apps, got a suggested name, then renamed that folder to say 'Food'. After which I added the food apps and removed the apps I used to create the folder in first place.
But as I stated above, if I try to pair say open table with Starbucks app, the suggested name doesn't come up nor is there an option to add a new name.

Similar Messages

When I got the IOS 8.2 update it did not come with the apple watch app like it said it wouldo

I went to settings and clicked on the IOS 8.2 update and when it restarted the apple watch which on the update discription said would be there wasn't there

The Apple Watch app is only on the iPhone. You can't pair a watch with a iPad even though it was included in the update.

Unable to open Sharepoint site with Designer "Folder name is not valid"

Hi all,
I'm using SharePoint 2013 with SharePoint Designer 2013, but currently I'm facing a weird behaviour.
I can open my preproduction SharePoint portal with SharePoint Designer 2013, but when I'm trying to open my production environment, I'm receiving the error "The folder name is not valid". Even it doesn't ask for credentials.
Anyone knows what is happening?

There are few other options people used to solve this issue. refer to the following posts if you haven't so far. hope it helps.
http://hightechdave.com/sharepoint-designer-the-folder-name-is-not-valid-error/
http://mesiag.blogspot.com/2011/10/sharepoint-designer-2010-folder-name-is.html
http://community.office365.com/en-us/f/154/t/11825.aspx
Cheers,

E-mail to the recovery user name does not come

e-mail to the recovery user name does not come
what i do?
I'm sorry for the mistakes i am polish

The employer should be setting its Macs up with corporate Apple IDs and corporate volume licesnses for the software. Individual employees personal IDs do not provide the Licensed Copy End User License Agreement that the Macs need in a business evironment. Your personal Apple ID only carries a consumer license and by law any of your own apps that you install on the Mac will it is in your control would need to be removed when you turn the Mac back over to the company.
When a Mac is first set up the original Apple ID is always going to be associated with that Mac, its installed version of OS X and the preinstalled iLife apps. And only that ID can update the iLife apps if they were properly accepted into the Apple ID*. But you should be able to sign out of the active Apple ID in the Store menu of both the iTunes App and the Mac App Store app, then sign into your Apple ID to install any of your own content that you wish to have on the Mac.
*If the iLife apps were not correctly accepted into the setup Apple ID, then they cannot be updated and no one can buy them again on that Mac with any Apple ID.

Ipod touch 4 gets hot while using some apps like angry birds?

Is it normal for the upper back of the ipod touch 4 to get hot while using some apps like angry birds? Is this a potential battery problem? It doesnt get hot while charging or playing songs... Just when using some game apps. I assume that it has something to do with battery drain, should I be concerned?

When the iPod is used heavily like for games it is norma for the iPod to get warm. Unless you hav short battery life I would not be concerned.

When i plug my itouch into my computeri get a pop-up that says "this ipod cannot be used because the apple mobile device service is not started." and when i plug it it my itouch name does not come up on my itunes, how do i start it and fix this?

When I plug my iPod Touch 4g into my computer I get a pop-up that says "This iPod cannot be used because the Apple Mobile Device service is not started." And when I plug in my iTouch the name of the iTouch does not come up on my iTunes. How do I start the Apple Mobile Device? How do I fix this?

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Report Name does not come when converted to HTML format.

We are using Report Builder 10.1.2.3.0 to convert a .rep file to HTML. We need the HTML output file to feed to a reports to xls converter.
Problem is, the html output does not have the report name. Report name (and also date, time. user, page etc.) are in the margin section. For some reason, it wont print the report name in the html. It works fine when I run it in the builder.
Here is a graphic of the actual outputs: http://postimage.org/image/uio1x32gt/
Why is this??? The property palette for a label that is printing in all pages (like Date ) is the same as for the report name (GL EXTRACT DETAIL REPORT), BUT it does not appear in the HTML output???
Any help would be greatly appreciated.
PS: We use rwrun.exe with desformat=HTML.

amitphynyl wrote:
hi,
have you tried another label for the header of your report.Hi Amit, I tried that, and you are right.
I created a simple text boilerplate in the margin , on top of the report name. And when we generate the HTML it comes in every page properly.
The property palettes of the 2 texts are EXACTLY the SAME.
So why doesn't the old text (with report name) does NOT appear and ONLY the new text appear????
Cos, we are trying to generate an MS Excel version of every report. For this, we use a tool called rep2excel, and it users as in input an HTML file. So, we have to generate the HTML from the rep and feed it to that.
So, since we have 200 odd reports, we will have to change all of them, that is why.
Here is the output (HTML file): http://www.freeimagehosting.net/newuploads/dgrip.gif

The keypad does not come up while adding new phone number to contact

I use iphone4. After I upgraded to ios7 finding lot sof issues. The biggest irritating issue is if I want to add a new number (after dialing this number or receiving a call from this number or receiving a sms from this number) and press add to contact, the contact place holders come up but if i click on the typing place the soft keybord does not come up. Funny thisg is it comes up sometimes. But not most of the time ! Lets solve this first before we get onto the more nuanced issues.

Try going to settings to General to reset to 'reset all settings'
This should do the trick!
Good luck

ITunes Windows do not come to the front when app is selected

When I Command-Tab to bring iTunes to the front, the open window does not come into focus. This behaviour is definitely not following human interface guidelines. It's the same when I click iTunes from the dock.

I'm having the same issue. It takes two clicks to bring iTunes window to the front. App switching or clicking on the dock icon will activate the application, but will not bring the iTunes window forward. I either have to click on the dock icon a second time or select iTunes in the app switcher again. Very strange.

Model Tree names do not come over in 3D PDF

I have Adobe Acrobat 9 Pro Extended and I am creating 3D PDFs from NX6. When I create a 3D PDF the model tree displays with generic model names, M1, M2, M3 ..., instead of my file names from NX, SHCS625X1-00, P-64-12. What setting(s) do I need to change so that my model tree names come into the PDF like it shows in the Help information?

Version 7 was very limited. Version 8 has the ability to do what you are asking. In version 9 they took much of that functionality away again. I capture my model in version 9, edit it in version 8 and finish off with setting up links and views in 9. The other important thing is that you can't compress the model in version 9 to the extent you can in version 8. For instance, I just finished a model that in version 9 weighed in at 39 MB but after compressing and tweaking in 8 was 7MB. The model is here: http://virtual-architec.com/ohiopolebarns/OPB-sample.pdf

I am trying to set up new folders under another e-mail in my inbox. The folder names are not displaying under the e-mail name. How can I get them to appear?

In my mail program on my Mac Book Pro I cannot get new folders to appear / be listed under a second e-mail account. They show up at the bottom of the window but not at the top as do the other folders in the initial e-mail account. How can I get my folders to appear?

- It does not make any difference what ID was used for setup.
- I would delete the email account from the iPod and then Goog for how to set up the account for yur particular provider. Example is: setup earthlink email on iphone
YOU can also go to your provider's support site and they should have instructions.

How to handle "The specified resource does not exist" exception while using entity group transactions to purge WADLogs table

Hi,
We have a requirement to purge the Azure WADLogs table on a periodic basis. We are achieving this by using Entity group transactions to delete the
records older than 15 days. The logic is like this.
bool recordDoesNotExistExceptionOccured = false;
CloudTable wadLogsTable = tableClient.GetTableReference(WADLogsTableName);
partitionKey = "0" + DateTime.UtcNow.AddDays(noOfDays).Ticks;
TableQuery<WadLogsEntity> buildQuery = new TableQuery<WadLogsEntity>().Where(
TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.LessThanOrEqual, partitionKey));
while (!recordDoesNotExistExceptionOccured)
IEnumerable<WadLogsEntity> result = wadLogsTable.ExecuteQuery(buildQuery).Take(1000);
//// Batch entity delete.
if (result != null && result.Count() > 0)
Dictionary<string, TableBatchOperation> batches = new Dictionary<string, TableBatchOperation>();
foreach (var entity in result)
TableOperation tableOperation = TableOperation.Delete(entity);
if (!batches.ContainsKey(entity.PartitionKey))
batches.Add(entity.PartitionKey, new TableBatchOperation());
// A Batch Operation allows a maximum 100 entities in the batch which must share the same PartitionKey.
if (batches[entity.PartitionKey].Count < 100)
batches[entity.PartitionKey].Add(tableOperation);
// Execute batches.
foreach (var batch in batches.Values)
try
await wadLogsTable.ExecuteBatchAsync(batch);
catch (Exception exception)
// Log exception here.
// Set flag.
if (exception.Message.Contains(ResourceDoesNotExist))
recordDoesNotExistExceptionOccured = true;
break;
else
break;
My questions are:
Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
Would this logic fail in any particular case?
How would this approach change if this code is in a worker which has multiple instances deployed?
I have come up with this code by referencing the solution given
here by Keith Murray.

Hi Nikhil,
Thanks for your posting!
I tested your and Keith's code on my side, every thing worked fine. And when result is null or "result.count()<0", the While() loop is break. I found you code had some logic to handle the error "ResourceDoesNotExist" .
It seems that the code worked fine. If you always occurred this error, I suggest you could debug your code and find which line of code throw the exception.
>> Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Base on my experience, we could use code (like the above logic code) and using the third party tool to delete the entities manually. In my opinion, I think the code is every efficient, it could be auto-run and save our workload.
>>Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
In you code, you used the "recordDoesNotExistExceptionOccured " as a flag to check whether the entity is null. It is a good choice. I had tried to deleted the log table entities, but I used the flag to check the result number.
For example, I planed the query result count is 100, if the number is lower than 100, I will set the flag as false, and break the while loop.
>>Would this logic fail in any particular case?
I think it shouldn't fail. But if the result is "0", your while loop will always run. It will never stop. I think you could add "recordDoesNotExistExceptionOccured
= true;" into your "else" block.
>>How would this approach change if this code is in a worker which has multiple instances deployed?
You don't change anything expect the "else" block. It would work fine on the worker role.
If any question about this issue, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I got the iPad 2 for Christmas 32gb and for some reason it did not come with the green messages app. Is there any way to get this on my iPad or am I out of luck?

Ipad2 came without messages app. Please help me in figuring out why! :)

What version of iOS have you get (Settings > General > About > Version) ? Messages was introduced with iOS 5, so if you aren't on that then you can update to it and you should get the Messages app.
Connect the iPad to your computer's iTnnes and copy any purchases off the iPad via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Nokia Lumia 1020 - did not come with Windows 8 and app is not available on phone

I was told to install Windows Phone Developer Registration Tool, but I get a Setup Blocked message - This product can only be installed on Windows 8 or later 64-bit Machine...the notebook that I am trying to install it on is Windows 8, etc.
I want to load Windows 8 on my phone so I can get Cortana.
Appreciate any responses to help me with this issue.
Thanks...

Welcome to the forum, refsens!
To verify, you're only having this issue with the recorded videos using the Nokia Camera app, is that correct? Since the reset did not work, might as well try using the Nokia Software Recovery Tool: http://www.microsoft.com/en-ie/mobile/support/faq/?action=singleTopic&topic=FA142987 for us to further isolate this issue. By the way, when's the last time you've updated your phone?
Keep us posted!

The delete option does not come up in my email app

When I hit edit to delete messages in email, it allows me to select messages but the option to delete or move is no longer there. It's almost as if my screen shrunk.

Close out of the mail app, double tap the home button and completely close out of it.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then check email again.

Folder names do not come up while bundling food apps like Starbucks, Dominos, Open table etc

Similar Messages

Maybe you are looking for