Folder problem with OSX 10.9.4

Since updating to the latest version (OSX Mavericks 10.9.4), I am having a problem creating a new folder on my desktop. When I create a new folder, everything that is on my desktop is moved into that folder. I cannot move it out or empty the folder without deleting all of the desktop items.
I am able to create empty folders elsewhere - Dropbox, for example.
Would appreciate any suggestions!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Acrobat Distiller Watched Folder problem with OSX 10.9

Probably not Adobe's problem but anyone else getting this?
Just upgraded to Mavericks and now when I try to print to a watched folder from Quark it keeps wanting to save the postscript file onto the desktop rather than directly into the "In" folder of the Distiller watched folder. Got so used to just hitting command/alt/p and then return.
Have recreated the watched folder just in case.
Quark 8 (ok not officially supported for OSX 10.9) but this seems more of a directory issue.
Preference is set to create postscript for later distilling and use watched folder.
Acrobat/Distiller X 10.1.8.
Am going to post this on Quark and Apple sites.
Somebody's costing me an extra few keystrokes per job printed !!!
Cheers.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Graphic problem with OSX Lion - freezing all windows

I try to define my graphic problem with OSX Lion. Simply if you have set for example hot cornes and switch between desktop, all windows etc. the move of switchng windows i chopping and freezing. I dont idea why, but it hapennig since I installed Windows 7 via bootcamp. But the problem is still here after I remove Windows. Cleaning cash doesnt work. Can anybody help me please?

No, it's not Lion. It may be something you installed. If you just bought it you could also take it back to the Apple Store and they may be able to help.

Having problems with OSX and mail with the servers?

Having problems with OSX and the mail servers? Seems to be happening more and more?

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

10.4 client problem with OSX Server 10.5.8

I have an late 2009 X_server with OSX 10.5.8 running, have binding to AD and enabled system as OD master. I have added an ad user to an od group and set a prefernce in the DOC to add the Group folder to the doc.
On my MBP mostly all goes well except for a question mark for ther group folder. But on an old G4 tower I'm testing with it just prompts me about not being assigned to a group and gives the option to apply settings. but the settinsg never take place. Has any had this problem before? Thanks in advance. Art

I've got the Audiotron working again. I found some info on basically opening the entire share to guest access. Reference this thread: http://discussions.apple.com/thread.jspa?threadID=392697
I tried changing "encrypt passwords" (global section) to "no" and that didn't help. Then I added this to the music share and everything works. Probably not the best security solution, but I'm behind a firewall.
In /etc/smb.conf added for the music share:
public = yes
only guest = no
writable = no
printable = no
(I still left "encrypt passwords = no" in the global section. I'm not sure if that made a difference or not.)

Mega problem with OSX - XP - VISTA sharing

hello.
first of all i want to say that i am not network-guru (so you could see some silly stuff here =) but also i am not /basic/ user (i know how to plug a cable properly =) and i was trying to google my problem for a few days and finally i will try to find help here...
i have few machines with various operating systems;
osx 10.5.4
windows vista home premium
windows vista ultimate
windows xp sp2
there are 10 machines and all of them share at least 1 directory or disk over the network. all windows are set up to map network drives (also one disk from osx) and osx is connecting to windows drives through standard smb:// protocol.
now... i am aware of all the problems with sharing stuff between osx and win, especially in my case, so my first question would be:
is there any GOOD tutorial how to set up such network properly??
i have seen few of them but seems that there are problems occurring again (i guess mostly because of vistas :P)
for example;
i want one of my osx to share TWO DISKS and TWO FOLDERS.
in osx preferences i set up everything correctly in sharing and users (btw, guest account is disabled on ALL machines!) but when i log in (from any machine) i can see ALL DISKS plus TWO SHARED FOLDERS plus MY USER'S FOLDER and everything is accessible and writable etc... after few restarts and trying to disable/enable file sharing, clearing caches and such stuff on osx, i tried to edit smb.conf from /etc and also from /var/db and by default option in [homes] part which says 'browseable' is set to NO... i tried to change 'read only = no' to YES and changed 'com.apple: show admin all volumes = yes' to NO and after that some strange happened... (i will not emphasize reboot points of ALL computers but it was done after each step =)
xp machines could see TWO DISKS, ONE FOLDER, MY USER'S DIR
vista machines could see TWO DISKS, ONE FOLDER (different than xp), MY USER'S DIR
osx could see ALL DISKS, TWO FOLDERS, MY USER'S DIR
EVERYTHING was writable.
if i would click to browse one of those disks on osx i could see everything inside but if i go back to the root of that computer, disk would instantly DISAPPEAR and become unaccessible from that pc. same on others.
now i left smb.conf files in default setting so everybody can see everything and everything is writable. =( after googling 'smb.conf' combinations i have seen that some people have completely different setups... how could i know which one is right for my osx?
generally my second question is: WHAT SHOULD I DO TO MAKE EVERYTHING WORKS FINE?
i hope you understood my problem because i am little bit lost in all this...
in addition there are my smb.conf files
/etc/smb.conf
; Configuration file for the Samba software suite.
; ============================================================================
; For the format of this file and comprehensive descriptions of all the
; configuration option, please refer to the man page for smb.conf(5).
; The following configuration should suit most systems for basic usage and
; initial testing. It gives all clients access to their home directories and
; allows access to all printers specified in /etc/printcap.
; BEGIN required configuration
; Parameters inside the required configuration block should not be altered.
; They may be changed at any time by upgrades or other automated processes.
; Site-specific customizations will only be preserved if they are done
; outside this block. If you choose to make customizations, it is your
; own responsibility to verify that they work correctly with the supported
; configuration tools.
[global]
debug pid = yes
log level = 1
server string = Mac OS X
printcap name = cups
printing = cups
encrypt passwords = yes
use spnego = yes
passdb backend = odsam
idmap domains = default
idmap config default: default = yes
idmap config default: backend = odsam
idmap alloc backend = odsam
idmap negative cache time = 5
map to guest = Bad User
guest account = nobody
unix charset = UTF-8-MAC
display charset = UTF-8-MAC
dos charset = 437
vfs objects = darwinacl,darwin_streams
; Don't become a master browser unless absolutely necessary.
os level = 2
domain master = no
; For performance reasons, set the transmit buffer size
; to the maximum and enable sendfile support.
max xmit = 131072
use sendfile = yes
; The darwin_streams module gives us named streams support.
stream support = yes
ea support = yes
; Enable locking coherency with AFP.
darwin_streams:brlm = yes
; Core files are invariably disabled system-wide, but attempting to
; dump core will trigger a crash report, so we still want to try.
enable core files = yes
; Configure usershares for use by the synchronize-shares tool.
usershare max shares = 1000
usershare path = /var/samba/shares
usershare owner only = no
usershare allow guests = yes
usershare allow full config = yes
; Filter inaccessible shares from the browse list.
com.apple:filter shares by access = yes
; Check in with PAM to enforce SACL access policy.
obey pam restrictions = yes
; Make sure that we resolve unqualified names as NetBIOS before DNS.
name resolve order = lmhosts wins bcast host
; Pull in system-wide preference settings. These are managed by
; synchronize-preferences tool.
include = /var/db/smb.conf
[printers]
comment = All Printers
path = /tmp
printable = yes
guest ok = no
create mode = 0700
writeable = no
browseable = no
; Site-specific parameters can be added below this comment.
; END required configuration.
/var/db/smb.conf
# Configuration options for smbd(8), nmbd(8) and winbindd(8).
# This file is automatically generated, DO NOT EDIT!
# Defaults signature: a13310200e774008e7f854700000293c480000
# Preferences signature: 200e4bd28a0b1e026490000552000000
# Configuration rules: $Id: rules.cpp 32909 2007-08-17 23:07:40Z jpeach $
# Server role: Standalone
# Guest access: never
# NetBIOS browsing: not a master browser
# Services required: org.samba.smbd org.samba.nmbd
[global]
security = USER
auth methods = odsam
netbios name = Azriel
workgroup = group
dos charset = 437
server string = Azriel
ntlm auth = yes
lanman auth = no
max smbd processes = 10
log level = 1
use kerberos keytab = yes
com.apple: lkdc realm = LKDC:SHA1.5587265F45481D473800CE75CE481F5A07475F59
realm = LKDC:SHA1.5587265F45481D473800CE75CE481F5A07475F59
map to guest = Never
domain master = no
preferred master = no
enable disk services = yes
enable print services = no
wins support = no
[homes]
comment = User Home Directories
browseable = no
read only = no
create mode = 0750
guest ok = no
com.apple: show admin all volumes = yes
[global]
thanks for ANY help!

somebody? something? anyhing? please! =)

Problems with OSX ja Active Directory (urgent!)

Hello, I'm newbie Mac user and I have a problem with integrating OSX to our company MS Active Directory. This MacBook Pro is a only Apple here, so this is quite difficult...
So far I have made following things:
- I made "Bind" succesfull (it pings from others computers and I can see it from AD tools)
- to AD account I changed my profile to include home folder (\\Adserver\user.account$). When I log on to AD via PC, home folders etc. are done with Logon script (Logon.bat) and I can see those shared folder fine.
- then I rebooted my Mac and on logon screen there is option Other --> there I input my AD username and password. After that OSX log in normally.
- But on Dock there is no Home folder, there is only a big question mark (?) and it says "User X X network home folder" (or something like that). And there is nothing behind this ?-mark
- I have checked from Gerberos that I have a valid ticket to AD-server
I have also tried to map network folder (apple + K), but there will error message that "Server couldn't reach, because user name or password is wrong"
I have spend a couple of days to solve this problem, but nothing seems to solve it. Could someone please help me? I really need those shared folders (yes, there are at leat two I need from AD), because on those folder are documents that I need daily at my work.
thanks,
-zooropa
MacBook Pro Mac OS X (10.4.5)

My admin username of Mac is "firstnamesurname" and AD account is "firtsname.surname". So the "dot" is only difference. Is that enough?
I made binding with Mac admin account and after that I used "other" on login screen of OSX. As I wrote, I can login fine with AD username and password, but the problem is that I can't map home folders from Windows Server 2003.

Printing problem with OSX 10.9.4 Mac Pro

I just bought a MAC A retina display with OSX 10.9.4, but it can not print. I use a canon Printer MX 397 Series (Fax/Print/Copy/Scan), after following all the instruction given by The Help Menu and from Internet, still can not works, I already updated the software that I just downloaded from canon website, but it did not work.
This printer works very well with my other laptop using windows OS.
I did not know what went wrong with my MAC, somebody please help me to solve this problem.
The only thing that work was The scanner, but still the doc was nowhere to found

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Fixed a problem with OSX-Logic and a MOTU 828MkII

I was having problems with my 828MkII using it with a new G5 and OS10.3.9. There were massive drop-outs.
It was a new computer and everything was installed correctly and cleanly - there was no other hardware installed other than the MOTU, and no other software other than Logic 7 - everything was done properly and tested over and over, but the problem persisted.
I still had my old G4 with an older OS9 version of Logic, and when I went back to try the MOTU with this set up, it worked flawlessly. This fact made me suspect that the core audio driver was the problem, so I tried all the tricks I've seen in forums - reset the MOTU - uninstalled and re-installed. Upgraded my firmware. Even tried OS10.4 with old drivers new drivers, and still nothing worked.
Then out of desperation I tried a new firewire cable and everything worked fine.
I went back and tried the set up on my OS9 machine a few times and the MOTU worked flawlessly under the Asio2 drivers. What I learned is that OSX and core audio must use firewire differently because the cable did not work with that set up.
I couldn't believe it. It's like finding out that a guitar cable only works with a Les Paul or something wierd like that.
I'm sure someone out there must know the technical difference and why this cable works fine under OS9 (Asio2) but not OSX (core audio).
I'm posting this because if I had read such a post - I would have tried a new cable as the first thing - but I had myself convinced that it could not be the cable. I still don't believe it. ! Luckily it was the cheapest fix.
Scott.

Same thing happened here when I check all items to install at once.
After the installation failure , L7,L8,Waveburner .. everything unexpectedly quit then I decided to replace the entire OS to cloned back up.
I tried the installation again and xxxx happened again. This time, I installed only applications (overwritten) again and it fixed the problem.
Then I installed only JamPack on FW and went smoothly.
I called Apple Tech and now I am waiting for the new installer DVDs of Audio contents only by regular mail.
Hey, do we have similar serial number?? Apple script got damaged or something? I have no idea.

UAG problems with OSX - same problem with Mac Mail and Outlook 2011 (via EWS)

Hi folks,
I'm trying to fix the last snagging issue I have with OSX clients in a UAG / Exchange 2010 deployment:
When trying to connect Mac Mail or Outlook 2011 the connections are very slow to start up, both at initial config and thereafter.
On connection I see lots of the same error re Session Cookies in UAG and no connection in the mail client. If I leave it for a few minutes, sometime many minutes, the errors stop and I eventually get a working connection.
The error is:
"Sesson Attempted to Access Restricted Application"
User with source IP address x.x.x.x tried to access application Exchange EWS that was restricted that was restricted for the session. This might indicate an intrusion attempt by misusing the session cookie.
Has anyone got any suggestions on how to fix this ?
Many thanks
Steve

Ruud, no, we didn't find a solution, or rather our solution (so far) is to tell users not to use Mac Mail and to use Outlook 2011 instead, which seems to work fine (after some Office updates!)...and we haven't upset anyone with that requirement
(yet).
There are some very long discussions on Apple support forums about the whole Mavericks / Mac Mail / Exchange 2010 issues.
I do hope to have another go at this problem sometime soon, I'm sure there must be a solution (and my money says it relates our hardware load balancers).
Steve

Import DNG Hang Problem with OSX not with Win 7

I installed LR4 on both my Mac Pro and Win7 machines for comparison purposes and have encountered a problem with importing files and converting to DNG format with OSX that is not present with Win7.
OSX machine
first gen Intel MAC Pro + 8GB memory multiple disks OSX 10.7.2
Win7 Machine - latest set of MS patches installed
Sandy Bridge Processor I5 2500K + 8GB memory multiple disks
On both machines:
I am importing 12 test images taken with my Nikon D300 and using a Kingston USB card reader
Copying to a data only disk that does not contain the catalog
Convert to DNG with copy to a sub-directory
Renaming the files to DSC_0001.DNG sequence format
Standard Previews
Dont import suspected duplicated enabled
No develop settings
Metadata with a simple copyright statement
OSX seemed to import the 12 DNG's ok as they all showed up on the Library grid screen... but the import seemed to hang before completion and no CPU was being consumed - this was prior to the previews being generated
I waited for 10 minutes with no CPU activity and then cancelled the Lightroom task, at that point LR4 generated the previews and everything looks fine, I can modify the DNG images and everything seems normal with them
With Win7 everything went as expected and completed in under 1 minute
I have screen shots available and I can reproduce this behaviour consistently on OSX

UPDATE - Further testing
I tried to import the images into LR3 and it worked fine on OSX (I don't have LR3 on WIN7)
However when under LR4 the hanging problem also occurs if I do a straight copy as well (ie: Dont convert to DNG format)

Linked Folder Problem with Oracle Enterprise Pack for Eclipse

I need to migrate an Eclipse/Tomcat dynamic web project to Oracle Enterprise Pack for Eclipse/WebLogic.
The Eclipse/Tomcat shares JavaScript files with other projects by using an linked folder /JS under WebContent. It works fine. But the migrated version in Oracle Enterprise Pack for Eclipse shows warning: "Resouce WebContent/WEB-INF/JS/Common.js not found." (Common.js is a JavaScript file in the folder /JS). The linked folder is under WebContent, not WebContent/WEB-INF. For some unknown reason, the mapping is not correct. I deleted and re-created the linked folder, it was still the same. I then delete the lined folder and created a real folder and copied the files into under WebContent/JS folder, it solved the problem.
I want to use linked folder because I do not want to maintain multiple copies of the same set of files. Please help to solve this mapping problem with linked folders.
Thank you,
Jerry

Thanks -- I tried Kosta's suggestion (which I had tried before) but still the same error.
I realized that on my development install (the rest of my team has a year+ old install) that I installed weblogic 12c version 12.1.3 (they have weblogic 12c 12.1.1). 12.1.3 requires jdk 1.8, correct? I started eclipse w/ jdk 1.8 & no more error. I added jdk 1.7 (jdk 1.7.0_45) as the default Java compiler in my Eclipse STS (sts 3.6.4; luna 4.4.2).
When I added a weblogic server instance to eclipse, 12.1.3 would not accept the jdk 1 compiler - it needed java 1.8. So ... I specified that.
I haven't tried it yet but -- is it ok to compile the code w/ jdk 1.7.0_45 and deploy it to weblogic 12.1.3 that uses jdk 1.8.0_40?
Thanks,
Bill

Hello! Recently encountered a problem with OSX start, after an emergency shutdown macbook

Hello! Recently encountered a problem after an emergency shutdown macbook (it was shut off due to low battery) and now I can not boot in OS X, the fact that I can't see what became of OSX, so as I have in parallel is Windows that is loaded instead of OS X (video here https://www.youtube.com/watch?v=2oSTZhaVy9g sorry for the quality, with YouTube's nothing you can do) When you select a disk partition with OSX in Windows, via Bootcamp the same. What could it be? Maybe there is a function of the last successful run? I have the opportunity to the entire disk with OS X, from file system to programs. Moreover, OS X has remained 1password. I would be very grateful for help, because the answer is never found. I have MBP 371 ll/a with OSX 10.9.5.

Yes, I can see the partition with OS X and Windows, better watch the video, it demonstrates this point.

Samba share problem with OSX client

hi all,
I've a well know problem with samba server, in my case linux samba server.
In my network 4 client Mac OSx with different OS version everyday are usually connect to samba share with smb or network finder, normaly without specifics configuration or other.
NOW, I've 3 macbook air client with different OS version that do not connect never.
Server log write WRONG PASSWORD but is not TRUE.
I've tried every solution without success.
There is a patch to be applied to client?
it's just a coincidence that only AIR does not work?
Thanks in advance
Regards

I'm noticing this in the job info as well:
Session setup failed: NT_STATUS_LOGON_FAILURE
and the logs show it trying to login as root when I am supplying my domain credentials.
If I add the printer by IP address it works fine. I tried to delete keychain keys but that didn't work for me.

Folder problem with OSX 10.9.4

Similar Messages

Maybe you are looking for