Folder rename error - Operating System bug?

I have a strange problem in my 6630. I tried to rename a folder that groups some applications. The folder was renamed correctly, but the "call log" was renamed as well, with the same name as the folder. It's strange, because within the options there is no possibility to rename the call log.
I tried an hard reset, and everything goes back to original. But when I restore the back-up data with PC Suite, the wrong name appears again.
Anyone knows about this problem?
Thanks!Message Edited by marcellorossi on 21-Feb-2006
11:12 AM

Please, any clue about it ?

Similar Messages

I fail to start the sap server with error:Operating system call recv failed

I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call           recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    674
intno      20020600
pid        3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
     shared lib "dw_xml.dll" version 674 successfully loaded
     shared lib "dw_xtc.dll" version 674 successfully loaded
     shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm)          12784     (752)
DpShMCreate: sizeof(tm_adm)          1690816     (8412)
DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)     192000     (384)
DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

Install Error (Operating System User Error)

Hello,
I am having a problem installing Oracle 9ias application server. I installed it once and then thought I messed the install up because I couldn't log on to the application manager. Anyway I deinstalled it using the product installer software they supply and then I rebooted and now I continue to get the following error. I am the only user who has ever tried to install the software.
All Oracle 9iAS installations on a host must be installed by the same operating system user. The initial Oracle 9iAS installation located at C:\ora9ias was installed by a different operating system user. Please exit the install, log in as the user who installed the inital Oracle 9iAS installation and restart the install.
Any ideas?

Hi,
you must drop manually the references in regedit to old iAs orcle home. Then you must drop the key 'em_loc' in regedit located in HKEY_LOCAL_MACHINE>Software>ORACLE if this key is pointing to Oracle 9iAS home.
I have done this and I've installed my ias instance right in W2K.

Cannot boot from Windows 8 notebook - Error: Operating system version is incompatible with Startup Repair

Hi all,
I have searched through forums, but could not find the solution to my problem:
I have a notebook ASUS with Windows 8 preinstalled.
Yesterday I was doing some housecleaning jobs with some freeware tool (don't remember the name).
Afterwards I have not been able to boot into Windows.
CURRENT SITUATION: When I switch the PC on, after the welcome screen of ASUS and Windows 8 the system goes to a blank screen (no cursor, no mouse, CTRL+ALT+DEL not working).
On next reboot, it does not start automatically the Recovery/Repair procedure and goes through the same steps again. It's not a loop, it just hangs.
Looking into c:\windows\system32\LogFiles\Srt\srttrail.txt I see the following error message at the bottom of the file on the time of my last boot attempt: "Operating system version is incompatible with Startup Repair"
I tried several things without success, so now I want to solve the problems one by one and first thing is to understand what might be causing the "Operating system version is incompatible with Startup Repair" error and how it can be solved.
Thanks for reading

Hi,
Any update here?
I agreed with the others. First, if we have any backup available to restore Windows 8.1, we may take use of that.
If we don't have any backup available, we'd better contact the manufacturer side for a deeper help.
Or as Janek Fehn suggested, make a clean install of Windows 8, then update to Windows 8.1 again.
Best regards
Michael Shao
TechNet Community Support

New operating system bugs.

I no longer have YouTube on my desktop and when I sign into YouTube I can't watch videos. YouTube say's I need a adobe flash player in order to view video's.
Thanks
Mike B.

Download and install either Jasmine or Tubebox. Apple no longer has a license with Google to include their apps in the OS.

Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.).

SQL 2005 Enterprise
Even if I logon as Administrator and try to backup any of my databases to local partitions, I get this error below. I have been operating fine up until this point and doing backups all the time. As far as I know, and after checking, no permissions have changed and of course Administrator has ntfs permissions to my local C and other partitions on this server:
TITLE: Microsoft SQL Server Management Studio
Backup failed for Server 'servername'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.). (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
BUTTONS:
OK
In the Event log for Windows Server 2003 I see this:
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10016
Date:  3/6/2006
Time:  3:35:06 PM
User:  NT AUTHORITY\NETWORK SERVICE
Computer: servername
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{BA126AD1-2166-11D1-B1D0-00805FC1270E}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20). This security permission can be modified using the Component Services administrative tool.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

SQL Service account is DOMAIN\SQLAdmin
Have given the SQLAdmin AD account access to the Backup shares on the file servers (2 file servers, FILE1, FILE2)
and I still get the error
Operating system error 5(Access is denied.).
RESTORE FILELISTONLY
FROM DISK = N'\\SERVER\APPS\backups\UA\DB\DB.BAK'
I trid to attach it as device, which runs
sp_addumpdevice 'disk', 'Network_Share', '\\SERVER\backup\APPS\UA\DB\DB.BAK'
BUT when restoring, same error occurred (Access denied)
Only case I can backup/restore to/from network shares, is from the machines where SQL Server runs (SQL1, SQL2)
e.g. I copy the BAK file from FILE1 to SQL2, share the folder (add SQLAdmin account with access), then restore on SQL1 with file from SQL2 Share
RESTORE FILELISTONLY
FROM DISK = N'\\SQL2\backups\UA\DB\DB.BAK'

Getting error when installing OBIEE 11.1.1.6 "Operating system does not support IPV4".

HI,
I am trying to install OBIEE 11.1.1.6 on Windows 7 .
Have created repository successfully ,using the RCU 11.1.1.6 and now tring to install
OBI. I am getting the below error
"Operating system does not support IPV4".
Can anyone please suggest why i am getting this error or
how should i get rid with this error??
Manoj.

Just in case check this Doc ID 1410233.1
~ http://cool-bi.com

"Operating system file operation on file IFile failed" error.

Hi there,
Does someone got a clue about the error "Operating system file operation on file IFile failed" occurring from time to time when scheduling Webi and Deski reports?
This occurs on a cluster environment with 2 servers (BOXI R2 SP2).
Regards,
Jeff

Hi Jeff,
-This error is usually associated with the system not being able to access the FRS when
BOE is trying to read the report.
-Also, could you please check that your document names should not have dot (.)
-It's also possible this could be permissions related could you please monitor the
system for any 'access denied' results and see if this is related to permissions.
Regards,
Sarbhjeet Kaur

Operating system message: No such file or directory in DMS while archivng.

Dear Team,
While i am trying to make the archiving i am getting the error "
Operating system message: No such file or directory" in DMS. I cross checked all the forums and made the settings as suggested still i am not able to resolve this. In fact it is working fine in my development system but not executing in Quality server.
Please do the needful.
Regards,
Banu

Hi Bhanu,
Check with technical details like archive directory ,customising settings on sara . I think so u made transport archive setting TR into quality server ?. On some repository the changes won't happen with imported TR on target system. Please cross check and do manually on quality server. My guess problem with OAC0 , OACT .
Regards,
chandu

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the las

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
I don't know if the bug exists in the program or the "Creative Cloud.
Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?

Entering the serial number is probably part of the registration process.
Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted?

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!

I only use Image Capture, so I can't speak for other software.
Here is how I select a Scan To destination:
If you are using the minimal details screen, you should have the same submenu to the left of the page size.

Error message when updating to new operating system

I just bought the iPhone 4 and it did not have the new operating system. When I try to download it my itunes goes through the whole process and then tells me there was an error and to make sure to check my network settings are correct and my network connection is active. Any ideas??

Hi there! I'm new to Apple Discussions but I'm willing to help in anyway I can. Please correct me if I am wrong.
Try turning off your firewall, something could be blocking it. I also suggest a restart of your computer system, it may fix a few of those pesky bugs. It usually works with my other application problems.
Hope I helped.
iOS-Apple

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation. When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.

Hi Tom,
kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
For serial number message try:
Error "Invalid serial number" | Acrobat 9 | CS4
Thanks,
Atul Saini

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).

Hello
When I try to start the SQl server service i get the following error:
Event id 17058
Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
Thank you

Hi,
Try running:
SELECT SERVERPROPERTY('ErrorLogFileName')
Then verify that the account being used to run the SQL Server service account has access to the path output above. If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
Thanks,
Andrew Bainbridge
SQL Server DBA
Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you

Folder rename error - Operating System bug?

Similar Messages

Maybe you are looking for