Folder showing question mark

help! when i turn on my computer it seems to work for about 30 seconds, but then it goes to a folder with a question mark. i purchased it 91 days ago and apple will not give me phone support.

Try things in Apple doc.#58042 on the subject.
Cheers!
DALE

Similar Messages

  • Folder with question mark keeps showing on boot screen

    folder with question mark keeps showing on boot screen

    Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk.
    (120871)

  • Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command   R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

    Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command   R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

    Startup – Question Mark
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • 27 inch Imac Intel won't boot up. Screen ligthts up, then shows a flashing file folder w question mark. What can I do to find the problem?

    27 inch iMac Intel won't boot up. Screen lights up, then shows a flashing file folder w question mark. What can I do to find the problem?

    Please readd Apple's trouble shooting steps in Flashing question mark appears when you start your Mac

  • Boot up shows folder with question mark...

    So my imac from 2006 (i think...20 inch plastic intel) booted up today to the blinking folder with a question mark on it. I rebooted into the osx disc to set the hdd as the startup disk, but it didn't show up in the list. Then I tried to see if I needed to repair the hdd using disk utility but the hdd wasn't showing up. So, do I have to replace the hdd? Not looking forward to it if I do.
    Message was edited by: gescamil

    Hi,
    I have had similar issues, you will have to restart it and press and hold the eject disk on the keyboard right away and it will force it out.
    Also to answer you question on way you are not seeing the Hard Drive and way you have the folder with question mark on the start up: is because your Hard Drive is dead.
    You will need to buy another Hard Drive install it and then fresh install the OS X.
    I have seen this issue too many times and every time is resulting with bad Hard Disk Drive...
    Look at the bright side, Hard Drives are cheep now and you have iFix it to assist you on step by step installation. (this is unless you have Apple Care).

  • My MacBook pro stop working and it shows folder with question mark after this update,  it's not my fault,  Apple should solve the problem with out ask me to make payment

    After updating my MacBook pro it shows only a folder with question mark on it
    It is not my fault, Apple updates problem
    They should solve it fir me without make any payment
    Thanks

    Try starting your computer holding down the option key as soon as you hear the startup sound, and continue holding it. Hopefully, you will see the icon for your startup disk come up on your screen within a minute. Click on that icon and press return. If your machine starts up normally from there, go to System Preferences > Startup Disk and reselect your startup volume

  • Mac Shows Folder With Question Mark On Startup?

    Hey Guys!
    I currently own a Macbook Air First Genereation (2008) running on Lion 10.7.5 (upgraded from Snow Leopard)
    Recently, when I was just using the Macbook Air, the Hard disk started spinning and was creating a lot of noise well I just ignored it and gave it a hard reboot
    So the next day wehn I booted my mac it was showing a folder with question mark on startup. I tried going to recovery (holding option on startup) but neither Macintosh HD or Recovery HD was being shown. I tried a internet recovery but it was not even entering Internet Recovery. I tried Single User mode, that didn't work.
    I really don't know what to do now, I am panicking cause I don't have a backup and all my schoolwork is inside there.
    Please reply soon and thanks in advance if you can help me
    A youtube tutorial or online step by step tutorial would be great!

    My tutorial is simple: pack up the MBA and charger and head for the nearest Apple store or Apple reseller. The error you see can mean three things: (1) your drive's system files are damaged, (2) your drive's directory or partition are damaged, or (3) your drive is dead. The fact that you can't boot into the recovery mode pretty much eliminates #1. It is possible that your drive's partition table was damaged but were that the case I'd expect that Internet recovery would work. So I strongly suspect #3.

  • I have macbook mid 2009, with os leopard and I updated it till yosemite now while deleting partition I erased the main hitachi drive , now I have no backups and while switching on it shows folder with question mark,inserting the grey dvd it keep spin

    Have macbook mid 2009, with leopard,  updated to yosemite,  while erasing partition erased hd, dot have backups, powerup shows folder with question mark, inserting grey dvd shows apple and spinning wheel, please help

    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1. From here you can upgrade to Yosemite by re-downloading it from the Purchases page in the App Store.

  • MacBook pro shows folder with question Mark

    MacBook pro (pre-unibody) is just showing a White screen with folder and question Mark in it. Is it a hard drive failure? What should I do?

    Hi Bobby,
    It does sound like the HD. Try booting from the install disc, then see if your HD even shows up in Disk Utility. If it does, check S.M.A.R.T. status and try running Repair Disk.
    First check the S.M.A.R.T. status on your HD: Applications>Utilities>Disk Utility>in the panel at left, select the first item in the list/your HD mechanism>look at the bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
    If S.M.A.R.T. status is "Verified," run Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications>Utilities>Disk Utility and run Repair Permissions.
    Message was edited by: tjk

  • Hard drive crash? Folder with question mark

    Hi everyone! I had problems with my macbook pro (early 2013). Last week, it slowed down suddenly and the laptop heats up during sleep. Then the hard drive recently crashed, at least I thought it crashed after it showed the folder with question mark during startup and did not show my old hard disk drive. Now I bought a 1TB WD mainstream hard drive disk, unfortunately it does not detect it in the internet recovery (disk utility). Now my question is, Do I have to do something with the hard drive first for my laptop to detect it? Like formatting it? The box said that it is compatible with mac OSx Lion, but my internet recovery lets me install Mountain Lion only. Is that the problem? or is the problem internal like the cable that connects the hard drive to the logic board?

    That depends on the type of drive you have. If it is a standard external drive (in an enclosure) you can connect the drive with a USB cable.
    If it is a bare drive like this:
    You will have to put it an enclosure and get a usb cable. External drive enclosure are < $10. They come in two sizes, 2.5" and 3.5". Buy one that's correct for your drive. http://www.amazon.ca/MOGOI-Enclosure-External--Silver-Accessory/dp/B00HC107R6/re f=sr_1_5?ie=UTF8&qid=1404755872&sr=8-5&keywords=disk+enclosure

  • Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

    Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

    Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
    The question mark folder indicates your Mac cannot find a system folder to boot from.
    A flashing question mark appears when you start your Mac

  • Getting white screen with file folder and question mark on it...help

    My MacBook Pro starts up and only shows a white screen with a file folder with question mark on it.  I have not had problems prior to this.  Help!,

    That means that no valid system could be found to boot from.  What might have caused that is hard to say, but try referring to this document:
    http://support.apple.com/kb/ts1440
    Note that if you are using Mac OS X 10.7 (Lion), you don't start up from your install disk.  Hold down command-R at startup instead.

  • I powered up my macbook and there is a file folder with question mark on the screen flashing.  What does that mean?

    Powered up Mac book and screen showing file folder with question mark flashing? 

    A flashing question mark appears when you start your Mac
    Hope that solves your issue.

  • Flashing folder with question mark at Startup

    Here is what I know so far.
    - The computer was powered off by pushing the power button without shutting down.
    - The computer was then restarted and it was coming into the white screen with the Apple logo in the middle, but i noticed that it was skewed slightly (like someone took a 4:3 ratio screen and stretched it to a 16:9) and then it would show a circle slash icon and then the flashing folder with a question mark on it.
    - It would not come up in single user mode (Command + S) and it said that there was an error loading kernel 'mach_kernel'
    - It would not come up in safe mode (Shift)(The flashing folder came up again)
    - I reset the PRAM (Command + Option + p + r) and it seemed to fix the problem with the stretched screen but did not help the boot situation (still got flashing folder)
    - I did the start up where you can select the hard drive to boot with, it owed the HD and i selected it, but then i got the flashing folder with question mark.
    - It would not come up in Verbose Mode (Command V) Error loading Kernel again.
    - I bought a FireWire cable and hooked it to another MacBook Pro, and booted the faulty Mac into Target Disk Mode, the FireWire logo came up on the screen and bounced around like all forums said that it would, but the drive would not show up on my host. I checked the System Profiler on the host and it did acknowledge the Target Disk Mode was there, but the drive of the target would not show up on the host. I restarted the host, nothing. I checked all of the connections, nothing. I replugged all of the connections, nothing. I even reversed the FireWire cable, nothing.
    - I have DiskWarrior 4 if i can get the drive to show up in TDM, but nothing so far.
    Does anyone have any suggestions?

    Thanks for your help guys. I managed to get the computer started by holding down C at the Start Up with the Install Disc 1 in the computer. The disc was really kindof unnecessary, as the newest version of Mac OS X (10.4.10) became available via the hard drive.
    I then found out that the battery was not installed, so I reset the management system by removing the A/C power, the battery and pushing the power button for 5 seconds, and then reconnecting everything. It did not help, the battery is bad i guess, so I am going to call AppleCare and get a new battery.
    Thanks for your help.

  • Blinking folder with question mark, and disk utility doesnt recognise hard drive, please help!!!

    So today i was using my macbook pro and for some reason my CD/DVD drive was causing noise when i put a DVD inside it, and for some reason it did not recognise my DVD. I force ejected it using the restart and clicking, but after that my computer showed a blinking folder and question mark during start up. I restarted my computer to Recovery HD, but instead it took me to internet Recovery HD (i have mountain lion), and so i went to disk utility to repair my disk, but in the left it did not recognise my hard drive. Please help! Im not that experienced in computing!

    Sounds like some sort of power issue and now your drive is not working.
    You'll have to take this to Apple for repair.
    You should read this if you don't have recent backups of your data off the machine.
    My computer is not working, is my personal data lost?

Maybe you are looking for

  • Production Order Confirmation- User Exit

    Hi guys, I am working on File to IDOC scenario interface in SAP XI/PI. Here before posting a confirmation IDOC into SAP.. validations or data checks required for Order Number ,Order status, size grid, std text key and work centre. and this can be ach

  • Automate FTP download from a website

    Hello Does anyone know how to automate a ftp download from a site using a login and password? I am using the SAP business objects XI 3.2 environment. Any help would be greatly appreciated ! Regards Juan

  • IPhoto MobileMe Gallery

    How do and can I sort the albums in my web gallery ? Just "drag-and-drop" won't do ... iPhoto '09 version 8.0

  • MIGO Problem if I Check MRP Parameter

    Hi all Experts     Need urgent help from all. My client knows total PUrchase value of a material.  So he rises PO for that value and at the time of Goods Receipt he Knows the basic value, BED, Ecess and SE Cess through vendor invoice. So at the time

  • Issue installing PS and ID on CC, error 49

    Hi, As stated above tried to install these 2 for trial and keep running into this error (49). I read similar inquiries and answers for this type of error, however wireless connection is my only option at the moment. Is there anything that can be done