Folder size and library size don't match?

I have my iTunes music library located on an external hard drive and when I do the "get info" tool on it it shows up being 43 gigs. However, when I'm using iTunes it says that my total music library is 19 gigs, my videos are only 383 mb, and my podcasts take up 2 gigs. that only amounts to about 21 gigs!? Does this mean that some songs didn't import when initially relocating my music library to my external hard drive? how can I find these songs and import them or delete them?

Hey There!
My reply to this person might help you!
http://discussions.apple.com/thread.jspa?threadID=1210125&tstart=0
Good luck!
Sharon

Similar Messages

Discrepancies between vault size and library size

Can anyone explain to me why there is large discrepancy between the size of my vault and the Aperture library?
I just synced my library to a vault and there is a 9 GB difference in the size of the two, with the vault being larger. Now I know there is a container of deleted images in the vault, but that only adds up to about 800 MB, so that still leaves an 8.2 GB difference. I'm wondering why there is such a discrepancy.
Both the drive that the library lives on, and the vault drive, are exactly the same size (300gb). In fact, they are the same brand of drive. Also, both are formatted the same.
I'm not sure I know what's going on, and that makes me a bit nervous since I'm dealing with my archive here.
Any thoughts?
Antonio

So, you can see from this that something is strange.
http://amrosario.com/vault01.jpg
This image shows a screen shot of the Aperture Library compared to the Vault which I just synced. The Aperture Library is on the left, with the "Get Info" box behind it. The Vault is on the right with its "Get Info" box behind it.
There are some BIG differences in the size of the project folders, as you can see, with the vault's folders being smaller across the board.
I mean, maybe I could chalk this up to some formatting differences between the drive (although I think I remember they were formatted the same). But if there was a formatting difference, wouldn't the folders all exhibit a similar proportion of discrepancy? Look at the "New York City" folders - almost 2 GB in difference, but the "Commercial Work" folder is less than 1.4 GB difference.
Arrrgh!
Antonio

Resize Video, both the file size and actual size

Hi All,
I am very new to Adobe Premiere (CS3). I have had it for a while but not needed to use until now. A client of mine has sent me a video that he wants on his website. But it’s 150M and 1280 * 720. Can anyone help me out with how I can resize both the file size and actual size to say 800 * 450 so it can stream it via the net?
Like I said very new to this,
Cheers,
Mike.

The first thing you need to do is determine just what KIND of file you were sent, so you may start a project that matches the file
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
I don't do streaming video, so you should search the help file... I **think** what you want out is a Flash file, but that is only after you know what you are going to load into the CS3 timeline

From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Getting file header size and image size

Hi all,
Now that the AVI file type won't work for me, I have to do some of that functionality myself.
I can use the function to Get File Size, and the size is returned in bytes, so far so good.
I figured I could calculate the image size by taking the resolution, multiply X and Y, that gives me the number of pixels.
Then multiply pixels by bit depth, to get the number of bits, divide by 8 for the number of bytes.
Since bit depth is 8, the number of bytes will be exact (and the same as the number of pixels).
When I did the math, and divided by the file size, it didn't come to a round number, and was a larger number than the number of images I could display.
I figured there is probably additional information stored with each image, but I don't know how to adjust for that.
There may be byte clustering happening, making each image larger than the actual byte count would indicate.
And, there is probably file header info, but not sure where to get that.
I looked through the IMAQ functions, and didn't see one about getting the image size (I did see the one that returns resolution, but I have that data already).
Any suggestions on how I can calculate how many images are in my binary file?
And, how to get the byte sizes I need to be able to set the file pointer correctly to get an image out of the middle of the file?
Thank you for any suggestions,
Jeff

If I understand correctly You have binary file with multiple images inside and You want to extract that images?
Depending on image type You can search by tags where image begins and ends: http://www.impulseadventure.com/photo/jpeg-decoder.html and extract.

DB Size and TAble size Estimation

Hi all
Please tell mehelp link or spredsheet to estimation DB Size and TAble size Estimate
Regards

Please tell mehelp link or spredsheet to estimation
DB Size and TAble size EstimateWhat size are you looking for?
1) Estimate of physical disk space used by an existing database schema?
2) Estimate of how much physical disk space will be required for some arbitrary data in order to create a new database?
Something else?
You need to be clear with your requirements

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer.

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer

What print and paper sizes are you using? Are you trying to print a borderless print? Does your printer support borderless for that particular size? Are you printing to the custom stock size or to a larger stock size?
OT

Did Lion's iTunes remove the video menu options to increase size and reduce size?

Did Lion's iTunes remove the video menu options to increase size and reduce size?
Is the ability to shrink or expand the video window from a menu item now really gone?

Itunes has not changed in Lion in this regard, you can still go to fullscreen from the menu, and use your input device to make the video window larger and smaller. does that help?

Adobe Illustrator print size and view size not fixed. Helped !

Hi, currently i am facing some problem about my actual view size and print size.
This is my actual view size :
This is my printed size :
Why after i printed out the size is not fit? i am using Adode Illustrator CS6 and my page size is A4 size. Any solution for this? Please help, thank !
Best Regards.

Hi Manish,
Thank for the reply ! i am using Adobe Reader X to print out.
Here is my print setting.

What are FIXED SIZE and VARIABLE SIZE

Hi what FIXED SIZE and VARIABLE SIZE stands for when starting oracle instance?
thanks in advance

read this
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:365088445659
Aman....

MY RAM IS 12GB HOW WOULD YOU SUGGEST SHMMAX SIZE AND SGA SIZE

Hi Export
MY RAM IS 12GB HOW WOULD YOU SUGGEST SHMMAX SIZE AND SGA SIZE.
thanks

afzal wrote:
my ram 12gb
database size 70gb
windows 2003
harddisk 500gbHow large is your SGA now??
Do you have a performance problem yet ??
Is the problem a global problem in the whole database, or are there just some queries that are slow ??
What db version are you using ??
What other applications are using this server ??
How many users are using this database ??
Tuning is very much dependent on the application/situation and database type.
I would like to suggest you start looking at AWR or Statspack.
HTH
FJ Franken
My Blog: http://managingoracle.blogspot.com

Volume size and Capacity size Don't match

Hello,
I have a fileshare running Windows 2008 R2 that has a Dynamic Disk that is 1670.78 GB formatted NTFS. The problem is if I look at the properties of the volume it says that the capacity is 987 GB. I'm not sure how to get the capacity up to the
full size of the volume.
The histry is we had a 2003 x64 file share that started life as a scratch place to store files so was RAID 0, according to the original specs for the project that was what they wanted. After time passed the share became permenant storage and loosing
it was actually a problem. At that point I wanted to make it RAID 5. However I also was hoping to keep the Shadow Copies to enable them to find previous versions of files so I ended up creating an iSCSI target and mirroring them through windows,
which made a full backup including the copies. I then broke the mirror rebuilt the RAID and then re-mirrored to the new volume. However becuase of going from RAID 0 to 5 I lost some space so had to resize the volume. I used a 2008 R2 machine
to shring the volume and then raised the capacity back up to the full size. However the space available never actually grew.
At that point I figured the problem was from the machine still running 2003 R2 and having been touched by a 2008 R2 machine. So I scheduled an upgrade and the server is now running 2008 R2, however I am still missing 600GB.
I can't expand the Volume at this point since there is no free space on the disk, and if I try to shrink the volume I get the option of how much to shrink, then after saying ok I get the error: "The parameter is incorrect."   When I look in the
Application Log I see an error saying the volume wasn't defragmented because an error was encountered. "The parameter is incorrect. (0x80070057)"
Please let me know any suggestions or if there is any additional information that would be helpful.
Thank you,
Eric

Hello,
Here is the chkdsk result:
CHKDSK is verifying files (stage 1 of 3)...
406672 file records processed.
File verification completed.
3368 large file records processed.
0 bad file records processed.
0 EA records processed.
0 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
469986 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
406672 file SDs/SIDs processed.
Security descriptor verification completed.
31658 data files processed.
CHKDSK is verifying Usn Journal...
314844376 USN bytes processed.
Usn Journal verification completed.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
Windows has made corrections to the file system.
1035144191 KB total disk space.
912448340 KB in 341209 files.
    165660 KB in 31659 indexes.
         0 KB in bad sectors.
    809607 KB in use by the system.
     65536 KB occupied by the log file.
121720584 KB available on disk.
      4096 bytes in each allocation unit.
258786047 total allocation units on disk.
30430146 allocation units available on disk.
Even though it reports altering the free space when I go look at the disk I see this:
(This is the best command I've found to copy into here, if you know a better one please let me know)
DISKPART> detail volume
Disk ### Status         Size     Free     Dyn Gpt
* Disk 1    Online         1670 GB      0 B   *
Read-only              : No
Hidden                 : No
No Default Drive Letter: No
Shadow Copy            : No
Offline                : No
BitLocker Encrypted    : No
Installable            : No
Volume Capacity        : 987 GB
Volume Free Space      : 116 GB
I don't think this is just the difference between size and size on disk, I think for some reason my MFT or something is screwed up.
Please let me know what you would like me to try next.
Thanks,
Eric

Paper size and Cell size don't match LR4

Hi I have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
I'm running on Windows home premium 64bit,
i have installed the Sony 64 bit printer driver.
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
can anyone help?

Thank you Janelle, see below! worked like a charme! not sure How I missed that? guess I was making it more complicated then it should be. I also ended up uninstalling and re-installing the printer driver.
But your steps not only got where where I needed to be but even made the print on site option even better now that I can control all 4 side of photo. winstonfoto.com . this give me more room inside photo sleve to fill frame with subjects.
Thanks again. Allen LR rocks!

Paper size and Cell size don't match

I'm running Windows Vista 64-bit, and using a Shinko 2145 printer. I've been able to print 4 x 6 's with no problem but now I've loaded the printer witih 5 x 7 paper. I've gone into the control panel and changed the setting to 5 x 7 paper size, and in lightroom (at the top) it says 5 x 7 but the cell size sticks to 4 x 6. No mater what paper size i set it to, the cell size stays at 4 x 6. How can I change the cell size?

Nothing changes at all, which is driving me crazy =P
This is where the printer is set to 4 x 6, which works
http://img10.imageshack.us/img10/2668/4x6da.jpg
This is where I change the printer to 5 x 7, yet the lightroom settings stick to 4 x 6
http://img693.imageshack.us/img693/977/5x7.jpg

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

Folder size and library size don't match?

Similar Messages

Maybe you are looking for