Folder structure in lightroom does not match structure at system level

The folder structure in lightroom as shown in the library module seems to have got confused. Instead of having the nested structure that appears on my hard drive I have a long list of folders. The list of folders gives the full pathway. When I hold the cursor over the folder name in lightroom there seems to be some duplication of the pathway so they look like this on two lines:
Parent folder\level one\level two
Drive name:\parent folder\level one\2
Is it the number "2" that is the problem and if so how do I get rid of it? Or there any other ideas.
Any help gratefully received
Mark Tatchell

Right-click (Windows) or Ctrl-click (Mac) on one of the folders and to open the folder context menu then choose Add Parent Folder

Similar Messages

Image appearance in Lightroom does not match exported .jpg

First time user of Lightroom, so be gentle.
I edit a RAW file in Lightroom and get it looking good, but when I export to jpg I run into a problem where the photo takes on a strong rosy hue.
This image shows the problem:
http://www.vaughnsphotoart.com/miscimg/colordifference.jpg
I took a screenshot of Lightroom, and superimposed the jpg output next to it.
I have been using RawShooter and have had no problems with the exported files matching the in-program image. I've had pretty good luck getting on-screen views to match my prints. So I'm a little baffled here at what to do. I see others are running into this as well (see http://www.adobeforums.com/cgi-bin/webx/.3bc34927/2 ) so a response might help many.
Am I correct to guess this has something to do with the Adobe ProPhoto color space?
What steps should I take to get my in-program image appearance match the exported version? I suspect I am missing a calibration process to get my color spaces to match, but I don't know how to affect the one Lightroom uses. Can anyone give some straightforward advice on what to do here?

I had exactly the same experience as Vaughn and David. I tried to do some tests of my own:
1. Exported a RAW image from LR as JPG, sRGB color space
2. Exported the exact same image as JPG specifying Adobe RGB
3. Exported the exact same image as TIFF (8bit, LZW compression), sRGB color
4. Exported the exact same image as TFF (8bit, LZW compression), Adobe RGB color space
The resulting images can be seen in the following web album:
http://picasaweb.google.com/Chris.Diewald/TestExportsFromAdobeLightroom.
(Most web browsers still do not care about embedded color space tags, but it appears that the images on the web page do not have a color-space tag anymore ! Still, they demonstrate what I see in other software on my screen.)
5. I opened these 4 images in Photoshop CS2, working space Adobe RGB (!), but specifically using the embedded profile (in the case of of sRGB exports).
Result: All 4 images - whether jpeg or TIFF, sRGB or Adobe RGB - look identical. And they are all identical to the likeness seen in LR!
6. I opened the sRGB images (jpg and TIFF) in Photoshop, but this time without preserving the embedded sRGB profile ("discard the embedded profile, don't color-manage"):
Result: The two sRGB images show a distinctive shift towards red and are a tad brighter. This was expected in a way.
7. I opened these 4 images in Microsoft Fax and Picture Viewer:
Result: All 4 images, whether TIFF or JPG, whether sRGB was embedded or Adobe RGB, are displayed identically, but *different* from what is seen in LR - more red and a bit brighter. Just like in Photoshop when the embedded sRGB profile was ignored.
8. Out of curiosity, I opened the 4 images in Picasa 2.5 (so popular with amateurs, so nice and so blindingly fast with huge masses of images. No comment on LR here...).
Result: Whether JPG or TIFF, the sRGB image comes out as redder and brighter, the AdobeRGB image exactly as viewed in LR!
9. Last Test: I opened the 4 images in Paintshop Pro 9.01
Result: same as those reported for Picasa. sRGB is not as seen in LR!
What does that suggest? I am not a color-space expert, so I leave that to those who know. But I am worrying whether LR really does what it says when I export?
Chris

CUA roles sometimes do not match the target system

Hi,
We are using CUA on Solution manager to assign roles to our different systems. Every now and then what is in CUA does not match the target System.
I know that you can look at the idocs using WE05 and see what the root cause was, fix it and then re-assign the role.
The problem is that when you assign the role using CUA, it doesn't warn you that the transmission failed on the target system.
We just went live last week, so I am added and removing roles from many different users using SU01 and SU10 and I do not think it is a valuable use of time to sift through the idoc logs every time I make a change. Especially, since most of the time it works.
Is there a better way to monitor the Idoc logs? Can you have it send a notification (email for example) when there is an error? Is there a better process then WE05?
Thank you in advance for the help!
Neil

Neil. It was a long time I played around with CUA. But I am remembering some transaction where you had the logs. Think it is SCUL.
I searched saphelp and got the following hits for you:
http://help.sap.com/saphelp_nw70/helpdata/EN/c1/db4063fd3111d5997a00508b6b8b11/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/cc/50b43be7492354e10000000a114084/frameset.htm
Best of luck to you!
Regards Fredrik

Structure Index Member structure imput does not match Input Splitter output

I am running into a problem with Tiger's Quartx Composer where a structure output from an Input Splitter does not match the structure input to the Structure Index Member it is directly connected to. The input to the Structure Index Member displays an unchanging value structure when a changing value structure is passed to it. The same result occurs if the inputted structure in received via publish by passing the Input Splitter. Does anyone know what would cause this to happen?

Hi Frank,
Sorry, I have absolutely no idea what you're dealing with, but have you done any OS Maintenance lately, like clearing Caches?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Help! Order of photos in a Folder does not match order of albums

I have seen dozens of threads on folders and albums, sorting them etc. However did not quite find an answer to this one.
The question is : Why the order of photos in a Folder does not match with the order of Albums I have created underneath the Folder?
In other words I created a floder and placed within the folder a few albums we will call G, K, C ...etc in the chronological order in which I want to show the pictures. The pictures within the album are not strictly chronological. ( I will explain more if this is an issue)
Next when I click on the Folder, I notice that the photos are grouped by the corresponding Album which is what they should be, however their(photos) order did not correspond to that of the Albums. In other words, in the Folder view, I see photos of K first and then may be G and then may be C. I am not able to change that order to G, K, C..the way I want. This will mess up the slideshow for me.
For clarity, I created each album simply by dragging corresponding event down into the Folder. The events are sorted by date and ascending in View>Sort Events.
I appreciate any suggestions please!
Thanks

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto, reset its preferences and try the slideshow again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
OT

Lightroom v. 3.6 and Sony A99 RAW does not match

I recently bought the newest Sony A99 camera, but it seems L.v. 3.6 does not manage this (aparently new) type of RAW-pictures.
Do I have to buy the L.v.4 or can I use v. 3.6 with changing some settings?
Thank you

Hello mJim,
It works. Thank you for your help.
Eugene
2013/3/30 jim01403 <[email protected]>
Re: Lightroom v. 3.6 and Sony A99 RAW does not match created by
jim01403 <http://forums.adobe.com/people/jim01403> in *Photoshop Lightroom
- View the full discussion<http://forums.adobe.com/message/5192043#5192043

Lightroom does not automatically find images that have been moved within same parent folder/drive

Lightroom does not automatically find images that have been moved within same parent folder/drive...I moved my catalog and photos to shared drive so that all users can access and when I moved photos within parent folder lightroom did not automatically adjust like in video I watched. I had to manually locate. Is there a fix for this?

Lightroom does not automatically find images that have been moved within same parent folder/drive...I moved my catalog and photos to shared drive so that all users can access and when I moved photos within parent folder lightroom did not automatically adjust like in video I watched. I had to manually locate. Is there a fix for this?
I haven't watched that video, but if you move photos in your operating system ... Lightroom does NOT automatically find these photos. Finding photos that have been moved is NOT a feature of Lightroom. So, there is no fix for this.
You would have to tell Lightroom where the photos are now located, as explained in the link from 99jon
If you must move photos, move them inside of Lightroom, not in your operating system, or better yet — don't move them, and use Lightroom tools such as keywords and other metadata to achieve organization.

"The class being compiled does not match the class that was imported"

----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.view.*;
var calDrawer:CalendarView = new CalendarView(); //Listener /
view
----------sixSpices/com/sixspices/updater/view/CalendarView.as
file----------
class CalendarView {
public function CalendarView(){
public function onRecieveData(listOfEvents:Array) {
displayEvents(listOfEvents);
public function displayEvents(listOfEvents:Array):Void {
trace(listOfEvents);
When I test the movie (updateSite.swf) in flash, it gives me
the error:
The class being compiled, 'CalendarView', does not match the
class that was imported,
'com.sixspices.updater.view.CalendarView'.

Here is my file structure:
sixSpices
-->updateSite
-->-->updateSite.fla
-->-->updateSite.swf
-->com
-->-->sixSpices
-->-->-->updater
-->-->-->-->view
-->-->-->-->-->Calendar.as
If I move updateSite.fla to the folder sixSpices so that
"com" is in the same folder as it, I get the same error.
The following works with no problems (no similar error):
----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.model.*;
var calModel:CalendarOverview = new CalendarOverview();
//Broadcaster / model
----------sixSpices/com/sixspices/updater/model/CalendarOverview.as
file----------
import com.sixspices.updater.model.*;
import mx.utils.Delegate;
import mx.events.EventDispatcher;
class CalendarOverview {
public function CalendarOverview(){
}

Itemization does not match cost component split

Hi,
I need your help or could you please shed some light as to how to fix .
A new Overhead was created, in order to add expenses to the pricing of the product. For it a variant of different pricing to which is used currently was created, and so for maintain a historic one of the information.
In addition, in the cost component Structure an adjustment of the configuration was carried out, this was done because the previous the cost component Structure contained 18 elements of costs, which the most of the elements were specified as fixed and variable costs, therefore the system only permitted the addition of 2 more elements (SAP only permits 20 elements of fixed and variable costs), nevertheless was necessary to create a total of 23 elements of costs. For it the previous elements have to be modified and to change some elements as variable costs, specifically the elements corresponding to the accounts of materials. using tcode OKTZ
The addition of 5 more elements of costs, corresponding to overhead elements, where the type 41 costs classes were configured from the plan of surcharge created.
After carrying out the changes and to transport them the client of production, when i execute the T-code ck13n an inconsistency in the previous pricings was generated, because the cost component Structure was modified and the the following one Nº message was showed: CK869 " Mat.XXX in plant XXX: itemization does not match cost component split, the report of itemization shows different values to the reports of Costed Mutilevel BOM and of Cost Components. Additionally to the error shown by the system, also is observed that to the Cost Components report a cost in the new elements of overhead was added, even when the calculation of previous cost did not contain the determination of overhead.
In order to fix the error, I modified the cost component structure as it was before and the created another cost component structure with the required changes requested by the client specifying that it should start to be current this year. However after that change the error message nºCK869 continue: Mat. XXX in plant XXX: itemization does not match cost component split. Adding to that error message, the cost of the finished product changes with reference to the calculus of the previous product after modified the configuration and that is because the cost of the semifinished product is not being taken the values of the row material, and it is appearing with cost 0 and the only value that is taking on the matter are the costs of the activities types.

If you want the message to go away then you need to mark and releasse the estimate. However, there is no requirement that you do this. The message you are getting is an informational message only. You can continue without re-costing the item. If you do re-cost the material the new cost estimate will reflect and changes you've made to the components, so there is a good chance you will get a different value with the new estimate. So if that's ok, go ahead and mark and release the new estimate.

Error: ORA-01861: literal does not match format string

Hi,
I am doing a RFC-XI-JDBC scenario.
In the CC monitoring , i am getting this error for the reciver CC:
"Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. "TableNAMe"(structure 'STATEMENTNAME'): java.sql.SQLException: ORA-01861: literal does not match format string "
Please guide me what can be the cause and how to solve it.
Thanks,
Puneet

This is how my payload looks like :
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_JDBC_REC xmlns:ns1="https:namespace.scene3">
<STATEMENTNAME>
<TABLE_NAME action="INSERT">
<TABLE>ggclgis</TABLE>
<access>
<VALVE_ID>12584</VALVE_ID>
<EQUNR>122</EQUNR>
<ERNAM>12122</ERNAM>
<INVNR>1212</INVNR>
<GROES>1212</GROES>
<ELIEF>123</ELIEF>
<GWLEN>21-jul-2008</GWLEN>
<GWLDT>12-jun-2006</GWLDT>
<SERGE>wqwqw</SERGE>
<TYPBZ>wqwqwq</TYPBZ>
</access>
</TABLE_NAME>
</STATEMENTNAME>
</ns1:MT_JDBC_REC>
Please tell me if it looks fine.

Sender FTP: FCC Missing Consistency check: no. of arguments does not match

Hi well my Input i as follows:
7283167S500481000000001789098
whereas my FCC in Sender-CC FTP is like:
RecordSet-Name: BestfileRecordSet
PecordSetStructure: BestFileHeader,,BestFilePos,
Recordsets per Mesage: *
KeyfieldName: BDART
BestFileHeader.fieldNames=BDKDNR,BDDSKNR,BDART
BestFileHeader.fieldFixedLenghts=4,3,1
BestFileHeader.endSeparator= 'nl'
BestFileHeader.processFieldNames= fromConfiguration
BestFileHeader.keyFieldValue=T
BestFilePos.fieldNames= BDART,BDIDENT,BDMENGE,BDFREMD
BestFilePos.fieldFixedLenghts= 1,8,7,10
BestFilePos.endSeparator= 'nl'
BestFilePos.processFieldNames= fromConfiguration
BestFilePos.keyFieldValue = S
BestfileRecordSet.endSeparator='nl'
In CC-Monitoring i get:
java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'BestFileHeader.fieldFixedLengths' or 'BestFileHeader.fieldSeparator' is missing Consistency check: no. of arguments in 'BestFileHeader.fieldFixedLength' does not match 'BestFileHeader.fieldNames' (0 <> 3)
so what is wrong?! Can sb help me?!
br Jens

Hi Guru, i would appreciate your help. Well the data in input-structure looks like:
7283167TCARTON
7283167T
7283167S014800000000010
7283167S015823030000004
7283167S016352100000040
7283167S016792020000007
7283167S016793020000007
7283167S031502020000010
etc.
Problem is also that instead of T (header) and S (Position) there might be L,D (also for Position). Therefore i have no clue how to handle these values as keyfieldValues.
some ideas?! br Jens

Getting descriptor version does not match runtime version error

Thanks,
I am Using Adope Air SDK2.0 and Runtime Air 1.0.7,
i have created one HelloWorld application using Adope sample
code.
When i am trying to run this using commands :
i have used : adl HelloWorld.html
i am getting this error:
invalid application descriptor: descriptor version does not
match runtime version
Plz help me out.. :-)

The issue I had in Flashbuilder4 has been solved.
The easiest but possibly not the neatest was too copy the AIR 2 Beta SBK folders and files, then paste the over the flex4.0 sdk file structure. Achieves the same thing and I assume that you have copies of the SDK else where, if you need to roll back.
The other thing is to make sure the -app.xml that flex creates has the correct 2.0beta description.
Cheers
Elliot

Why my XML is not loading ?? (ORA-19007: Schema - does not match expected )

Hi,
I want to load a XML document in structured XMLType. You can run my code on your database if you have a directory object called LOG_DIR. I am on Oracle 10.1 .
The schema is a simple example which describe a database table(like it will have 1 or more columns and 0 or more indexes). My schema looks like,
<xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Tables" type="Table">
<xs:annotation>
<xs:documentation>Table defination</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="table_name" type="xs:string"/>
<xs:complexType name="Table">
<xs:sequence>
<xs:element name="Column" type="Column" minOccurs="1"/>
<xs:element name="Index" type="Index" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Column">
<xs:annotation>
<xs:documentation>Column of the table</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="1"/>
<xs:element name="Type" type="xs:string" minOccurs="1"/>
<xs:element name="Capacity" type="xs:decimal" minOccurs="1"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="Index">
<xs:annotation>
<xs:documentation>Index on the table</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="1"/>
<xs:element name="Type" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
I registered the schema,
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'tables.xsd',
SCHEMADOC => bfilename('LOG_DIR','tables.xsd'),
CSID => nls_charset_id('AL32UTF8')
END;
This was successfull, also the following create table was ok,
CREATE TABLE TMP_XML_TABLES
file_name VARCHAR2(2000),
load_date DATE,
xml_document XMLType
XMLType COLUMN xml_document
XMLSchema "http://xmlns.oracle.com/xdb/schemas/TDB/tables.xsd"
ELEMENT "Tables";
Now I have a XML document,
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/xdb/schemas/TDB/tables.xsd">
<table_name>trades</table_name>
<Column><Name>trade_id</Name><Type>varchar2</Type><Capacity>50</Capacity></Column>
<Column><Name>source</Name><Type>varchar2</Type><Capacity>100</Capacity></Column>
<Column><Name>trade_date</Name><Type>date</Type></Column>
<Column><Name>trader</Name><Type>varchar2</Type><Capacity>200</Capacity></Column>
<Index><Name>trades_pk</Name><Type>btree</Type></Index>
<Index><Name>trades_idx1</Name><Type>bitmap</Type></Index>
</Tables>
When I am trying to load this, I get the error,
SQL> INSERT INTO TMP_XML_TABLES
2 VALUES
3 ('tables1.xml',
4 sysdate,
5 XMLType
6 (
7 bfilename('LOG_DIR','tables1.xml'),
8 nls_charset_id('AL32UTF8')
9 )
10 );
INSERT INTO TMP_XML_TABLES
ERROR at line 1:
ORA-19007: Schema - does not match expected tables.xsd.
Can somebody please explain the cause ???
Thanks and Regards

A quick search of the forum for ORA-19007 should have allowed you to find the answer to your problem. Since you XML Schema does not declare a target namespace you need to use the xsi:noNamespaceSchemaLocation tag rather than the schemaLocation tag..
Also please do not use URLs starting http://xmlns.oracle.com for your schemaLocation hint. If you do no own your own domain I'd suggest example.org...
Finally please make sure that your XML Instance is valid per your XML Schema before posting. You can do this using tools like JDeveloper or XMLSpy. What should have been a 5 min repsonse took me over 20 mins to work through due to the errors in the XML Schema...
Anyway here's a working example for you
SQL>
SQL>
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2    :schemaURL := 'http://xmlns.examples.org/xdb/schemas/TDB/tables.xsd';
3    :schemaPath := '/public/testcase.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> DROP TABLE TMP_XML_TABLES
2 /
Table dropped.
SQL> call dbms_xmlSchema.deleteSchema(:schemaURL,4)
2 /
Call completed.
SQL> declare
2    res boolean;
3    xmlSchema xmlType := xmlType(
4 '<xs:schema elementFormDefault="qualified" attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="
tp://xmlns.oracle.com/xdb">
5     <xs:element name="Tables" xdb:defaultTable="TABLES_TABLE">
6     <xs:annotation>
7                     <xs:documentation>Table defination</xs:documentation>
8             </xs:annotation>
9             <xs:complexType>
10                     <xs:complexContent>
11                             <xs:extension base="Table"/>
12                     </xs:complexContent>
13             </xs:complexType>
14     </xs:element>
15     <xs:complexType name="Table">
16             <xs:sequence>
17                     <xs:element name="table_name" type="xs:string"/>
18                     <xs:element name="Column" type="Column" maxOccurs="unbounded"/>
19                     <xs:element name="Index" type="Index" minOccurs="0" maxOccurs="unbounded"/>
20             </xs:sequence>
21     </xs:complexType>
22     <xs:complexType name="Column">
23             <xs:annotation>
24                     <xs:documentation>Column of the table</xs:documentation>
25             </xs:annotation>
26             <xs:sequence>
27                     <xs:element name="Name" type="xs:string"/>
28                     <xs:element name="Type" type="xs:string"/>
29                     <xs:element name="Capacity" type="xs:decimal"/>
30             </xs:sequence>
31     </xs:complexType>
32     <xs:complexType name="Index">
33             <xs:annotation>
34                     <xs:documentation>Index on the table</xs:documentation>
35             </xs:annotation>
36             <xs:sequence>
37                     <xs:element name="Name" type="xs:string"/>
38                     <xs:element name="Type" type="xs:string" minOccurs="0"/>
39             </xs:sequence>
40     </xs:complexType>
41 </xs:schema>
42 ');
43 begin
44    if (dbms_xdb.existsResource(:schemaPath)) then
45      dbms_xdb.deleteResource(:schemaPath);
46    end if;
47    res := dbms_xdb.createResource(:schemaPath,xmlSchema);
48 end;
49 /
PL/SQL procedure successfully completed.
SQL> begin
2    dbms_xmlschema.registerSchema
3    (
4      :schemaURL,
5      xdbURIType(:schemaPath).getClob(),
6      TRUE,TRUE,FALSE,TRUE
7    );
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> CREATE TABLE TMP_XML_TABLES
2 (
3 file_name VARCHAR2(2000),
4 load_date DATE,
5 xml_document XMLType
6 )
7 XMLType COLUMN xml_document
8 XMLSchema "http://xmlns.examples.org/xdb/schemas/TDB/tables.xsd"
9 ELEMENT "Tables"
10 /
Table created.
SQL> insert into TMP_XML_TABLES values ('testcase1.xml',sysdate,xmltype(
2 '<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/T
/tables.xsd">
3     <table_name>trades</table_name>
4     <Column>
5             <Name>trade_id</Name>
6             <Type>varchar2</Type>
7             <Capacity>50</Capacity>
8     </Column>
9     <Column>
10             <Name>source</Name>
11             <Type>varchar2</Type>
12             <Capacity>100</Capacity>
13     </Column>
14     <Column>
15             <Name>trade_date</Name>
16             <Type>date</Type>
17     </Column>
18     <Column>
19             <Name>trader</Name>
20             <Type>varchar2</Type>
21             <Capacity>200</Capacity>
22     </Column>
23     <Index>
24             <Name>trades_pk</Name>
25             <Type>btree</Type>
26     </Index>
27     <Index>
28             <Name>trades_idx1</Name>
29             <Type>bitmap</Type>
30     </Index>
31 </Tables>'))
32 /
1 row created.
SQL> set long 10000 pages 0 lines 160
SQL> /
1 row created.
SQL> select * from TMP_XML_TABLES
2 /
testcase1.xml
21-APR-06
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
    <Name>trade_id</Name>
    <Type>varchar2</Type>
    <Capacity>50</Capacity>
</Column>
<Column>
    <Name>source</Name>
    <Type>varchar2</Type>
    <Capacity>100</Capacity>
</Column>
<Column>
    <Name>trade_date</Name>
    <Type>date</Type>
</Column>
<Column>
    <Name>trader</Name>
    <Type>varchar2</Type>
    <Capacity>200</Capacity>
</Column>
<Index>
    <Name>trades_pk</Name>
    <Type>btree</Type>
</Index>
<Index>
    <Name>trades_idx1</Name>
    <Type>bitmap</Type>
</Index>
</Tables>
testcase1.xml
21-APR-06
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
    <Name>trade_id</Name>
    <Type>varchar2</Type>
    <Capacity>50</Capacity>
</Column>
<Column>
    <Name>source</Name>
    <Type>varchar2</Type>
    <Capacity>100</Capacity>
</Column>
<Column>
    <Name>trade_date</Name>
    <Type>date</Type>
</Column>
<Column>
    <Name>trader</Name>
    <Type>varchar2</Type>
    <Capacity>200</Capacity>
</Column>
<Index>
    <Name>trades_pk</Name>
    <Type>btree</Type>
</Index>
<Index>
    <Name>trades_idx1</Name>
    <Type>bitmap</Type>
</Index>
</Tables>Since you are tracking metadata about the documents (name, date loaded) you might want to consider using the XDB repository to load the documents. The folllowing shows how you can do this from SQL and then create a view which contains the metadata and document content. The advantage of this approach is you can now load the documents using FTP or WebDAV.
SQL> declare
2    res boolean;
3    document xmltype := xmltype(
4 '<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/T
/tables.xsd">
5     <table_name>trades</table_name>
6     <Column>
7             <Name>trade_id</Name>
8             <Type>varchar2</Type>
9             <Capacity>50</Capacity>
10     </Column>
11     <Column>
12             <Name>source</Name>
13             <Type>varchar2</Type>
14             <Capacity>100</Capacity>
15     </Column>
16     <Column>
17             <Name>trade_date</Name>
18             <Type>date</Type>
19     </Column>
20     <Column>
21             <Name>trader</Name>
22             <Type>varchar2</Type>
23             <Capacity>200</Capacity>
24     </Column>
25     <Index>
26             <Name>trades_pk</Name>
27             <Type>btree</Type>
28     </Index>
29     <Index>
30             <Name>trades_idx1</Name>
31             <Type>bitmap</Type>
32     </Index>
33 </Tables>');
34 begin
35    res := dbms_xdb.createResource('/public/testcase.xml',document);
36 end;
37 /
PL/SQL procedure successfully completed.
SQL> create or replace view TMP_XML_TABLES_VIEW as
2 select extractValue(res,'/Resource/DisplayName') FILENAME,
3         extractValue(res,'/Resource/CreationDate') LOAD_DATE,
4         object_value XML_DOCUMENT
5    from RESOURCE_VIEW, TABLES_TABLE t
6   where extractValue(res,'/Resource/XMLRef')= ref(t)
7 /
View created.
SQL> select * from TABLES_TABLE
2 /
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
    <Name>trade_id</Name>
    <Type>varchar2</Type>
    <Capacity>50</Capacity>
</Column>
<Column>
    <Name>source</Name>
    <Type>varchar2</Type>
    <Capacity>100</Capacity>
</Column>
<Column>
    <Name>trade_date</Name>
    <Type>date</Type>
</Column>
<Column>
    <Name>trader</Name>
    <Type>varchar2</Type>
    <Capacity>200</Capacity>
</Column>
<Index>
    <Name>trades_pk</Name>
    <Type>btree</Type>
</Index>
<Index>
    <Name>trades_idx1</Name>
    <Type>bitmap</Type>
</Index>
</Tables>
SQL> select * from TMP_XML_TABLES_VIEW
2 /
testcase.xml
21-APR-06 02.21.37.031000 PM
<Tables xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.examples.org/xdb/schemas/TDB/tab
s.xsd">
<table_name>trades</table_name>
<Column>
    <Name>trade_id</Name>
    <Type>varchar2</Type>
    <Capacity>50</Capacity>
</Column>
<Column>
    <Name>source</Name>
    <Type>varchar2</Type>
    <Capacity>100</Capacity>
</Column>
<Column>
    <Name>trade_date</Name>
    <Type>date</Type>
</Column>
<Column>
    <Name>trader</Name>
    <Type>varchar2</Type>
    <Capacity>200</Capacity>
</Column>
<Index>
    <Name>trades_pk</Name>
    <Type>btree</Type>
</Index>
<Index>
    <Name>trades_idx1</Name>
    <Type>bitmap</Type>
</Index>
</Tables>
SQL>
SQL>
SQL>

Routing does not match selection ID 01

Hi all,
I have query while run the costing (CK11N) for Assembly Material. Error displays as "Material X: Routing does not match selection ID 01".
This Assembly Material has Routing with 2 Direct and 5 In-direct opeartions as well as defined the Labor for Direct Operations with respect to the CC assigned in WC.
Can anyone help me out why this error occurs?
Regards,
Sundhu

Dear Sundareswari,
Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
>check the value or ID assigned for routing selection.
As per this your routing gets selected in CK11N or CK40N.
Check and revert
Regards
S Mangalraj

Error : the class does not match the class of the persisted object

Hi I am new to Java.. I got an exception "the class does not match the class of the persisted object for cl = java.util.Vector : __SUID = -2767605614048989439, getSUID(cl) = 1".. What it implies? I got Serialized stream and Object from Web Server.. How to resolve this Exception? I nead to Deserialize this stream...

ArulPrabhu wrote:
Friend... I agree with u... Every thing Ok... I am not having the option to make change on the server side... I call a webrequest for the URI - "http://www.nseindia.com/chartdata?mkttype=N&series=EQ&symbol=RPOWER&charttype=ONLINE_STOCK".. From that i got response as Serialized Object Stream... Which is the data made available to all through their applet "Chart".. But i need it for my Custom Project.. I know the Structure of class they have serialized... Is their any chance to parce Data from that Stream..
Three words.
You are doomed.
Whatever you end up doing will not be serialization. It will be reverse engineering of a old (dead) format that could go all pear shaped on you when you least expect it. One of the worst problems in using a solution where you reverse engineer, try and guess hackery your way through a proprietary semi (or totally) undocumented format is that it is really impossible to test your code with any degree of certainty. Does your code actually work? Or does it only work because you haven't seen some totally unexpected (but legal for the format) format yet?
Get the producer to produce XML instead of "serialized" data. This is a much better route for you to go down.
If you decide to keep on your path then grab a DataInputStream and go somewhere else because you'll have to figure out the format of another languages serialized data on a place that isn't this site.

Folder structure in lightroom does not match structure at system level

Similar Messages

Maybe you are looking for