Folder with question mark on start up
Hi all
I began downloading updates on a macbook laptop and then cancelled (10.4.1). I then started doing a couple of other things (viewing pdf and safari). When I went to quit these programs the coloured circular processing wheel came on screen for extended period of time. Therefore out of inpatience I turned the lap top off by holding down the power button. Upon restart I got the folder with the question mark. I have read and tried all the available options,
- Start up from system software CD - Disk utility - Repair - Did not work
- Safe start - couldnt get it to work
- Reset PRAM - didnt change anything
I am considering reinstallation but am worried about losing everything on HD. Do you have any suggestions. Any help would be appreciated.
It's certainly worth a shot, but I don't think it will work--and you'll want to backup your data just in case.
How much space is on that other computer? Do you have a FireWire cable?
If you have a FireWire cable, connect one end to the working Mac and the other to your MacBook. Boot your MacBook while holding down the T key. Your MacBook should load with the FireWire icon on the display--it looks like a Y. On the working machine, your MacBook should appear as an external hard drive called "Macintosh HD" with the FireWire symbol. Best option after this would be to create a folder on the working computer--called "MacBook" perhaps--and move any files you want to save over there. Not sure if there's a way to preserve settings (ie iTunes library information) by copying the folders, but I can try to find out. Copy data from your Users folder.
The Applications folder may not copy the contents over if you just drag and drop--and if any of those applications were installed with a CD/DVD or other installer, rather than just dragging and dropping, you'll need to reinstall later.
~Lyssa
Similar Messages
-
Hard disc dead??? flickering folder with question mark on start up
I get a flickering folder with question mark on start up, and i cant get into mac osx.
I tried the hardware test and it detected no problems. Ive tried to do an install with the disc but no harddisc was detected to install it on.
I cant believe my harddisc is broken all my work is gone (backing doesnt help with configurations etc)I know many of you don't understand english. Basicly what the articel tells us is that there is a problem with the harddrive due to a contruction caused error.
I would say please do something about it. Start a program to solve this problem
Thank you very much (my seagate still works, lets see for how long!!!
Der Festplatten- und Datenrettungsspezialist Retrodata aus der englischen Grafschaft Hampshire gibt eine beunruhigende Warnung an MacBook-Besitzer heraus. Apple-Notebooks, in denen ab Werk Seagate-Festplatten arbeiten, sind nach seinen Untersuchungen mit einem Fabrikationsfehler konfrontiert, der zum Totalausfall der Festplatte mit einhergehendem Datenverlust führen kann.
Nach eigenen Angaben erhält der Spezialist eine Vielzahl dieser ausgefallenen Platten zur Wiederherstellung von Daten. Die Untersuchungen von Retrodata zeigen, dass der Schreib-Lesekopf der Festplatte mechanisch ausfällt. Dies führt dem Spezialisten nach zu tiefen Kratzern auf der Oberfläche der magnetischen Scheiben mit entsprechenden Datenverlusten.
Anwender können schnell selbst feststellen, ob ihr MacBook gefährdet ist. Die betroffenen Segate-Platten sind ausgestattet mit der Firmware in Version 7.01. Zeigt der System-Profiler, zugänglich über den Befehl “Über diesen Mac… / Weitere Informationen” im Apfel-Menü, in der Kategorie Serial-ATA ein Laufwerk mit der Hersteller-Kennung ST und der Versionsnummer 7.01, dann besteht nach diesem Bericht ein hohes Ausfall-Risiko. Die Firma rät allen betroffenen Anwendern ein Backup der Daten anzulegen und umgehend ihren Händler zu kontaktieren. -
Folder with Question Mark on Start-up/ DOS-like screen with errors now...
Left my Mac Pro running last night, woke up to it being frozen (looked like it was
in hibernation mode and wouldn't wake up).
Forced a shut down from button on tower - on start-up, went gray screen
with blinking folder with question mark.
Inserted install disc 1 and held down 'C' - Went to choose your lang menu,
I picked English, went to choose start-up disc. Options were the install
disc and a network drive with a question mark. I picked drive with
question mark.
Computer looked like it was trying to restart, apple with loading circle
spinning, and then blinked to a black screen that looked like DOS that was
blinking error messages (one message was "diskOs2 undefined Oxe0030005")
Any suggestions?
Mac Pro Mac OS X (10.4.9)Was there a storm or outage that could have brought it down? for now it sounds like a kernel panic screen is what you are seeing. If you don't have a UPS, I wouldn't be w/o. Never know when one of those high winds will knock out power.
You could try to do an SMC Reset and see.
I assume you usually sleep the system and it doen't have trouble with wake from sleep, and you haven't altered the system (new hardware etc) in any way that would change that. -
Flashing folder with question mark on start up + many other issues
About 6 months ago I first encountered the flashing folder with question mark on startup. I fixed the issue myself by unplugging the mouse and keyboard and rebooting. I also did the cmd S fsck -fy before that and all was well.
The other day I had the flashing folder again...I got it going a couple of times but it happened again. Right now I seem to be in deep trouble. Please read the following:
1. I booted up from the leopard dvd and no hard drive was there to run a disk utility on
2. Booted up again from the dvd and hard drive was there. Ran the disk utility and everything was fine...for about 5 minutes. Then the computer froze and I had to hard power down. Rebooted to the flashing folder.
3. Did command s and fsck but at the end I get the message failed to issue comm reset after 3 attempts.....failing....
4. I powered down, vacuumed out the vents, sprayed compressed air to make sure it wasn't over heating from dust buildup as I read somewhere.
5. Booted up...worked for about 5 minutes again.
6. Now I can't get to the hard drive from the install dvd at all...I tried 100 times. Cmd s won't work at all!! So it looks like I am out of options. Does anyone have ny radical solutions that i can try to fix this. There are some very important things on my hard drive that I would be very upset about loosing.
Please replySorry to bear bad news, but most likely the drive is already dead or dying. I hope you backed up everything when the first symptoms appeared.
There are data recovery services, but might be very expensive.
EDIT: Some (a few) people have had success putting the drive (sealed very well in a plastic baggy) in the freezer overnight and then quickly putting it in an external enclosure and getting the data off it that way.
Message was edited by: WZZZ -
Folder with question mark at start up
Why a, I ratting a blinking folder with a question mark at start up. My MacBook will not open beyond that. Is it a ram issue?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'llsee a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I upgraded to mavericks yesterday and now i have the folder with question mark on start up
I've tried booting up pressing the option key and i get to the startup utility section but it won't let me erase, re-install or anything
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Blinking folder with question mark at start up
When i turned on my iMac I was surprised to see a folder icon blinking as it was running fine before this. I didn't delete or install anything.
My DVD drive does not read properly so i am unable to boot from the installation disk, tried to boot using BootCD from Charles Soft that didnt work either. Even tried resetting PRAM/NVRAM, unplugged keyboard and LAN cable as well but still no luck.
Read many articles online regarding this issue and it seems that my hard disk must have crashed. I don't have backup of any files.
Can anyone please help me resolve this issue? I desperately need my data back
Please help.Whew, yes, at the very least it's having trouble with the Data on the Drive.
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Do you have another Mac with Firewire & a FW cable? -
Folder with question mark and smiling mac face at start up
After I was importing some video today, shut down G5 and on start up I get the folder with question mark and smiling mac face.
Any help?
Power Mac G5 Mac OS X (10.4.8)Boot from a drive with Disk Warrior 4, or your emergency boot drive (FW or alternate) or if you lack that, use single user mode to run fsck command. The last option would be your Tiger DVD but that may be 10.4.3 or earlier and not your best.
I say that because it seems like it was more than just needing to reset the startup disk preference and may have a corrupt directory. It shutdown smoothly and fully?
At the least, using the OPTION key and SHIFT key for Safe Boot. My recollection of trying to do both is that it won't. You can do one or the other, but not both. So running FSCK is just insurance to repair the directory. -
My computer has a blinking folder with question mark on it at start... What is going on?
My computer has a blinking folder with question mark on it at start... What is going on?
The hatter wrote:
also that the default is no longer set asin when someone had windows as default and removed it w/o changing Startup Disk panel.
Oh yes, I forgot that people still do that -
When I start my iMac 2008, appear something like folder with question mark inside
When I start my iMac 2008, appear something like folder with question mark inside
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)
Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
The question mark folder indicates your Mac cannot find a system folder to boot from.
A flashing question mark appears when you start your Mac -
Powered up Mac book and screen showing file folder with question mark flashing?
A flashing question mark appears when you start your Mac
Hope that solves your issue. -
Folder with question mark + wont boot from disk
Hi
I am trying to reinstall a powermac g5 from the disk, using a old hard drive that works.. (formatted in NTFS) (hoping that when selected to boot from disk, mac will then erase and reformat it)this image is presented when i hold down the option key and the disk ejects this other image is presented when i hold down C (folder with question mark blinking) and the disk ejects... also presented if i boot normally.... Could some help be offered please??????
Powermac G5
Thank you in advanceYes, you must Format it HFS+ first...
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html -
Flashing folder with question mark at Startup
Here is what I know so far.
- The computer was powered off by pushing the power button without shutting down.
- The computer was then restarted and it was coming into the white screen with the Apple logo in the middle, but i noticed that it was skewed slightly (like someone took a 4:3 ratio screen and stretched it to a 16:9) and then it would show a circle slash icon and then the flashing folder with a question mark on it.
- It would not come up in single user mode (Command + S) and it said that there was an error loading kernel 'mach_kernel'
- It would not come up in safe mode (Shift)(The flashing folder came up again)
- I reset the PRAM (Command + Option + p + r) and it seemed to fix the problem with the stretched screen but did not help the boot situation (still got flashing folder)
- I did the start up where you can select the hard drive to boot with, it owed the HD and i selected it, but then i got the flashing folder with question mark.
- It would not come up in Verbose Mode (Command V) Error loading Kernel again.
- I bought a FireWire cable and hooked it to another MacBook Pro, and booted the faulty Mac into Target Disk Mode, the FireWire logo came up on the screen and bounced around like all forums said that it would, but the drive would not show up on my host. I checked the System Profiler on the host and it did acknowledge the Target Disk Mode was there, but the drive of the target would not show up on the host. I restarted the host, nothing. I checked all of the connections, nothing. I replugged all of the connections, nothing. I even reversed the FireWire cable, nothing.
- I have DiskWarrior 4 if i can get the drive to show up in TDM, but nothing so far.
Does anyone have any suggestions?Thanks for your help guys. I managed to get the computer started by holding down C at the Start Up with the Install Disc 1 in the computer. The disc was really kindof unnecessary, as the newest version of Mac OS X (10.4.10) became available via the hard drive.
I then found out that the battery was not installed, so I reset the management system by removing the A/C power, the battery and pushing the power button for 5 seconds, and then reconnecting everything. It did not help, the battery is bad i guess, so I am going to call AppleCare and get a new battery.
Thanks for your help. -
Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?
Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.
Maybe you are looking for
-
I am in iphone **** or better icloud ****. When I try to go ointo settings on the phone a signin prompt pops up continuously with one apple id. I think i've made it that i have a separate icloud and apple id. I am trying to delete the icloud id. I ma
-
Firefox wont start or load but when I press ctl, alt, delete I see it running?
I upgraded Firefox. I worked for one night, the next night When I tried to open it it didnt work. I press ctl alt delete and noticed that it was running in the background but no window... IE and Chrome works fine... I do have internet. I ran virus sc
-
Hallo, ich wollte mir das Update Photoshop CS2 vorbestellen. Leider bekommeich immer den Fehler "Für Produkt 23102177 ist das Anlegen von Vertriebsbelegen verboten". Kann mir jemand helfen? Ich hab schon bei Adobe angerufen und dort sagte man mir man
-
Problem reading data from two tables
Hi experts, I'm developing a JDBC - IDOC scenario that needs to read data from two oracle tables. I have created a BPM that has a initial fork for the two channels and it works fine. The problem is that I need to read data from the first, two or both
-
how do I sync my music, which is not all bought on iTunes with my iPhone?