Folder with question mark popping up when I turn on my Mac

A little water spilled on my Mac acouple days ago. I let it dry for about 36 hours and it turned on again but a folder with a question mark comes up and flashes. A friend of mine told me that I need to install the iOS software that it came with. Unfortunately I cannot find it and have made an appointment with my local Genius Bar. I just wanna know will my computer work the same as it did before (meaning not slowed down) and will I be able to save any memory that I had on it before the accident?

I responded to you here >  Some water spilled on my Mac: Apple Support Communities
BTW, iOS is for iPads, iPhones, and the iPod touch, not Mac OS X.
Keep the Genius Bar appointment. Hopefully they can reinstall OS X for you.
If you have not been backing up your important data prior to the water damage, when they reinstall OS X you may not be able to access those files.
Very important to backup documents, bookmarks, calendars, photos, etc, to an external source on a timely basis so that it can be recovered.

Similar Messages

  • Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

    Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?

    Provide the computer's firmware password. If you don't know what it is, contact the person you got the computer from or Apple.
    (91589)

  • Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

    Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

    Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
    The question mark folder indicates your Mac cannot find a system folder to boot from.
    A flashing question mark appears when you start your Mac

  • Folder with Question Mark when booting?

    Twice during the past 4 times booting my MacPro, I have received a folder icon with a question mark in it. I turned off the mac and restarted it and it rebooted. Why is it doing this?
    Thanks.

    Go to System Preferences -> Startup Disk, and check that your startup disk is set correctly. If it is, and you continue to see the flashing question mark folder when booting, try resetting the PRAM.
    It's also possible that your hard drive is failing. Make sure you have an up-to-date backup at all times. Does the S.M.A.R.T. status check out okay with Disk Utility?

  • When I start my iMac 2008, appear something like folder with question mark inside

    When I start my iMac 2008, appear something like folder with question mark inside

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • When booting up get flashing apple folder with question mark and no sign, why?

    When booting up get flashing apple folder with question mark and no sign, why?  Computer will not open up.  I have tried resetting the Pram.  I can access the hard drive from another computer holding down the t key when starting up the Macbook Pro.  What to do next?

    The cable connecting the HDD to the logic board may be faulty.  If the internal HDD can boot the MBP when in an external enclosure, that will confirm this issue.  If not, the HDD may need to be replaced.
    Ciao.

  • MacBook Pro flashes file folder with question mark and startup manager will not run

    My son's MacBook Pro won't boot (gets the flashing file folder with question mark).  When I try to open startup manager (holding "option" key during boot does not do it).  Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store.  Any further suggestions?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

    Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings 
    in response to Niel
    Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
    Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

    Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
    On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

  • I powered up my macbook and there is a file folder with question mark on the screen flashing.  What does that mean?

    Powered up Mac book and screen showing file folder with question mark flashing? 

    A flashing question mark appears when you start your Mac
    Hope that solves your issue.

  • Folder with Question Mark on Start-up/ DOS-like screen with errors now...

    Left my Mac Pro running last night, woke up to it being frozen (looked like it was
    in hibernation mode and wouldn't wake up).
    Forced a shut down from button on tower - on start-up, went gray screen
    with blinking folder with question mark.
    Inserted install disc 1 and held down 'C' - Went to choose your lang menu,
    I picked English, went to choose start-up disc. Options were the install
    disc and a network drive with a question mark. I picked drive with
    question mark.
    Computer looked like it was trying to restart, apple with loading circle
    spinning, and then blinked to a black screen that looked like DOS that was
    blinking error messages (one message was "diskOs2 undefined Oxe0030005")
    Any suggestions?
    Mac Pro   Mac OS X (10.4.9)  

    Was there a storm or outage that could have brought it down? for now it sounds like a kernel panic screen is what you are seeing. If you don't have a UPS, I wouldn't be w/o. Never know when one of those high winds will knock out power.
    You could try to do an SMC Reset and see.
    I assume you usually sleep the system and it doen't have trouble with wake from sleep, and you haven't altered the system (new hardware etc) in any way that would change that.

  • Folder with question mark + wont boot from disk

    Hi
    I am trying to reinstall a powermac g5 from the disk, using a old hard drive that works.. (formatted in NTFS) (hoping that when selected to boot from disk, mac will then erase and reformat it)this image is presented when i hold down the option key and the disk ejects this other image is presented when i hold down C (folder with question mark blinking) and the disk ejects... also presented if i boot normally.... Could some help be offered please??????
    Powermac G5
    Thank you in advance

    Yes, you must Format it HFS+ first...
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://web.me.com/pondini/AppleTips/DU.html

  • Folder with Question Mark on Boot

    I can't get my mac to boot. Instead I get the gray screen and a folder with question mark icon. I'm guessing the HD is dead? Any chance for recovery? If not how much does a new one cost? The one year warranty just expired!
    Please help!
    Thanks,
    Brian

    So, what is it? The thing froze today and wont reboot - just a gray screen with NOTHING. Then after about 10 min. the flashing question mark folder appears.
    So, I popped in the install DVD that came with the computer, get the little gray Apple logo and it boots from the DVD.
    Launch Disc Utility. The HD appears on the left. Click on it - all of the "Verify" and "Repair" buttons remain grayed out. So what the hxll do I do?
    I cant boot into single-user mode or any other mode for that matter.
    This is a Macbook pro, dual-core Intel, less than a year old.

  • My computer has a blinking folder with question mark on it at start... What is going on?

    My computer has a blinking folder with question mark on it at start... What is going on?

    The hatter wrote:
    also that the default is no longer set  asin when someone had windows as default and removed it w/o changing Startup Disk panel.
    Oh yes, I forgot that people still do that

  • HT1366 How to fix Flashing Folder with Question Mark on Mac

    How to fix Flashing Folder with Question Mark on Mac

    RichardEL is probably correct.  I’ll go through your questions.
    > there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
    I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not.  The System Disk partition would be below the HD icon indented to the right.  It is usually called “Macintosh HD” unless you renamed it.
    > when I go into disk utility my HD appears on the left, but I can repair or verify it
    Odd.  It appears but you cannot manipulate it with Disk Utility.
    > The S.M.A.R.T status reads verified
    If it did not say Verified then it would indicate a problem.  Saying Verified does not rule out problems but I think it indicates it is still breathing.
    > Is the HD deceased?
    If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing.  If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
    >  [If I] restore from time machine [will] everything will be back as it was before?
    Yes.  That is the beauty of Time Machine.  All your data, applications, and system preferences will be as they were as of the last backup.
    > I was thinking of erasing the HD, would this be of any help or do I just need a new one?
    Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk.  Before proceeding it may be useful to have an expert at an Apple store look at it for you.  They may be able to revive it without a clean install or new disk.
    As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help.  To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk.  Here are links to the screwdrivers and enclosure you would need.
    $5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
    $22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
    If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition.  Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros.  This will write to every sector to map out bad blocks.  (If you have an SSD do not write a pass of zeros.)
    If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly.  Google “Seagate 1 TB hybrid SSHD”.

  • I installed the window 7 os in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume the mac os x?

    i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

Maybe you are looking for

  • Print error on HP LaserJet 4 Plus

         I have a Macbook Air, Mac OS X 10.6.8 and have installed my old trusty Laserjet 4 Plus printer. It printed once, then gave me an error, "W2 INVALID PERS" and won't print again. I am told I do not need to download another driver, the Air has what

  • Regarding Entity Dimension in Planning

    Hi All, We have created one application with X as Entity dimension, now the requirement is we need to change Y as Entity dimension here Y is custom dimension in Planning. Is there any simple way to tag Y as Entity ? Thanks in advance. Regards, Sravan

  • How to get string from jtextpane along with its attributes

    sir, How to get string from jtextpane along with its attributes i,e font,size,style,color etc. please help me out. my mail id is [email protected]

  • Music player missing!!

    After I downloaded the software update that came out over a month ago my default music player disappeared. I thought after this new update it might come back but it hasn't....please help!!!! And no it hasn't moved and it isn't in a different folder

  • Installing Printers with ZENworks Policies

    Hi all, I am sure this issue has been brought up before, but I am new to ZENworks and really not having any luck with installing local printers. ...