Folder with Question Mark, to Apple Icon, to Kernel Screen at Startup.

At startup Folder with Question Mark, Followed all steps to resolve it to no avail, I try to re-install Snow Leopard and Apple Icon with Grey screen appears, then Kernel screen.
I cannot get past the Kernel screen.  No options to click anything, like system preferences or anything. I have a Macbook, with Snow Leopard.  Any help would be much appreciated.
I tried Pram Reset and everything.

Hey, thanks for the quick reply Mende.
I tried that, it goes to the apple icon, however after about 10 seconds of the apple it goes straight to the Kernel screen.  It doesn't give me the options of opening anything. Infact it doesn't even have a mouse curser.
If I hold "option" it gives me the option of choosing only the "Leopard DVD" but that's it and then it goes to the Kernel Screen
Again, thanks for the taking the time to help me out.

Similar Messages

  • Folder with Question Mark on Start-up/ DOS-like screen with errors now...

    Left my Mac Pro running last night, woke up to it being frozen (looked like it was
    in hibernation mode and wouldn't wake up).
    Forced a shut down from button on tower - on start-up, went gray screen
    with blinking folder with question mark.
    Inserted install disc 1 and held down 'C' - Went to choose your lang menu,
    I picked English, went to choose start-up disc. Options were the install
    disc and a network drive with a question mark. I picked drive with
    question mark.
    Computer looked like it was trying to restart, apple with loading circle
    spinning, and then blinked to a black screen that looked like DOS that was
    blinking error messages (one message was "diskOs2 undefined Oxe0030005")
    Any suggestions?
    Mac Pro   Mac OS X (10.4.9)  

    Was there a storm or outage that could have brought it down? for now it sounds like a kernel panic screen is what you are seeing. If you don't have a UPS, I wouldn't be w/o. Never know when one of those high winds will knock out power.
    You could try to do an SMC Reset and see.
    I assume you usually sleep the system and it doen't have trouble with wake from sleep, and you haven't altered the system (new hardware etc) in any way that would change that.

  • Folder with Question mark on it on a gray screen.  Will not restart!? :(

    While browsing online the other night, my Macbook completely froze up on me. I couldn't move my mouse and the screen froze.  I decided to restart it but then the Macbook started making a whirring/ clack clack noise and I got a gray screen with a flashing question mark folder.  I've tried restarting it up again since then, and I get nothing.  The noise continues and I get nothing but the blinking folder with the question mark on it.  The Macbook is roughly 5.5 years old  Any suggestions?

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • My MacBook pro stop working and it shows folder with question mark after this update,  it's not my fault,  Apple should solve the problem with out ask me to make payment

    After updating my MacBook pro it shows only a folder with question mark on it
    It is not my fault, Apple updates problem
    They should solve it fir me without make any payment
    Thanks

    Try starting your computer holding down the option key as soon as you hear the startup sound, and continue holding it. Hopefully, you will see the icon for your startup disk come up on your screen within a minute. Click on that icon and press return. If your machine starts up normally from there, go to System Preferences > Startup Disk and reselect your startup volume

  • When booting up get flashing apple folder with question mark and no sign, why?

    When booting up get flashing apple folder with question mark and no sign, why?  Computer will not open up.  I have tried resetting the Pram.  I can access the hard drive from another computer holding down the t key when starting up the Macbook Pro.  What to do next?

    The cable connecting the HDD to the logic board may be faulty.  If the internal HDD can boot the MBP when in an external enclosure, that will confirm this issue.  If not, the HDD may need to be replaced.
    Ciao.

  • Folder with Question Mark on Boot

    I can't get my mac to boot. Instead I get the gray screen and a folder with question mark icon. I'm guessing the HD is dead? Any chance for recovery? If not how much does a new one cost? The one year warranty just expired!
    Please help!
    Thanks,
    Brian

    So, what is it? The thing froze today and wont reboot - just a gray screen with NOTHING. Then after about 10 min. the flashing question mark folder appears.
    So, I popped in the install DVD that came with the computer, get the little gray Apple logo and it boots from the DVD.
    Launch Disc Utility. The HD appears on the left. Click on it - all of the "Verify" and "Repair" buttons remain grayed out. So what the hxll do I do?
    I cant boot into single-user mode or any other mode for that matter.
    This is a Macbook pro, dual-core Intel, less than a year old.

  • Flashing folder with question mark at Startup

    Here is what I know so far.
    - The computer was powered off by pushing the power button without shutting down.
    - The computer was then restarted and it was coming into the white screen with the Apple logo in the middle, but i noticed that it was skewed slightly (like someone took a 4:3 ratio screen and stretched it to a 16:9) and then it would show a circle slash icon and then the flashing folder with a question mark on it.
    - It would not come up in single user mode (Command + S) and it said that there was an error loading kernel 'mach_kernel'
    - It would not come up in safe mode (Shift)(The flashing folder came up again)
    - I reset the PRAM (Command + Option + p + r) and it seemed to fix the problem with the stretched screen but did not help the boot situation (still got flashing folder)
    - I did the start up where you can select the hard drive to boot with, it owed the HD and i selected it, but then i got the flashing folder with question mark.
    - It would not come up in Verbose Mode (Command V) Error loading Kernel again.
    - I bought a FireWire cable and hooked it to another MacBook Pro, and booted the faulty Mac into Target Disk Mode, the FireWire logo came up on the screen and bounced around like all forums said that it would, but the drive would not show up on my host. I checked the System Profiler on the host and it did acknowledge the Target Disk Mode was there, but the drive of the target would not show up on the host. I restarted the host, nothing. I checked all of the connections, nothing. I replugged all of the connections, nothing. I even reversed the FireWire cable, nothing.
    - I have DiskWarrior 4 if i can get the drive to show up in TDM, but nothing so far.
    Does anyone have any suggestions?

    Thanks for your help guys. I managed to get the computer started by holding down C at the Start Up with the Install Disc 1 in the computer. The disc was really kindof unnecessary, as the newest version of Mac OS X (10.4.10) became available via the hard drive.
    I then found out that the battery was not installed, so I reset the management system by removing the A/C power, the battery and pushing the power button for 5 seconds, and then reconnecting everything. It did not help, the battery is bad i guess, so I am going to call AppleCare and get a new battery.
    Thanks for your help.

  • HT1366 How to fix Flashing Folder with Question Mark on Mac

    How to fix Flashing Folder with Question Mark on Mac

    RichardEL is probably correct.  I’ll go through your questions.
    > there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
    I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not.  The System Disk partition would be below the HD icon indented to the right.  It is usually called “Macintosh HD” unless you renamed it.
    > when I go into disk utility my HD appears on the left, but I can repair or verify it
    Odd.  It appears but you cannot manipulate it with Disk Utility.
    > The S.M.A.R.T status reads verified
    If it did not say Verified then it would indicate a problem.  Saying Verified does not rule out problems but I think it indicates it is still breathing.
    > Is the HD deceased?
    If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing.  If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
    >  [If I] restore from time machine [will] everything will be back as it was before?
    Yes.  That is the beauty of Time Machine.  All your data, applications, and system preferences will be as they were as of the last backup.
    > I was thinking of erasing the HD, would this be of any help or do I just need a new one?
    Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk.  Before proceeding it may be useful to have an expert at an Apple store look at it for you.  They may be able to revive it without a clean install or new disk.
    As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help.  To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk.  Here are links to the screwdrivers and enclosure you would need.
    $5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
    $22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
    If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition.  Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros.  This will write to every sector to map out bad blocks.  (If you have an SSD do not write a pass of zeros.)
    If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly.  Google “Seagate 1 TB hybrid SSHD”.

  • Blinking folder with question mark! Recovery mode not recognising hard drive!

    So today on my MacBook Pro 13" mid 2010, for some reason a CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside. So I looked up on how to force eject it out, and I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work. After I turned on my MacBook Pro and on the startup I found the blinking folder with question mark! I went through Internet recovery mode, and I found out that it did not recognise my hard drive!
    -Do I have to replace my hard drive?
    Please help! I'm fairly new with computers :(

    Kazmunai wrote:
    I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work.
    That was for very old Mac's and PC's, it's been a long time since any modern Mac had that ability.
    CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside.
    Press and hold the power button down to force a hardware shutdown.
    Hold the trackbutton down and the option/alt key at the same time, now boot the machine.
    The disk should spit out and you should eventually see a row of icons appear on the screen, this is Startup Manager and you can pres the eject key here also to get the cd to spit out.
    If you see MacintoshHD (or your OS X boot volume) click it and the arrow underneath and when you get into OS X, head to System Preferences > Startup Disk and set it again. Your problem should be resolved at this point.
    If you don't see your OS X boot volume and it shows RecoveryHD only, or holding the option/alt goes to Internet Recovery, then your boot drive is dead or there is some sort of other issue/power /Mac related.
    Try a #1 SMC Reset and a #2 PRAM reset and see if that fixes things.
    ..Step by Step to fix your Mac
    If not, I then suspect because you couldn't eject the cd that something electrical bad happened to the Superdrive and as a result it also effected the power or something going to the boot hard drive.
    The hard drive might still work just fine if it's removed from the machine and a SATA to USB adpater to another Mac.
    My advice is to take the machine to Apple for a free hardware evaluation, then decide what you want to do from there.
    My computer is not working, is my personal data lost?

  • Help! White screen with gray folder with question mark

    Help, my macbook always shows this white screen with gray folder with question mark after turning it on.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

    I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

    Hello,
    That means it can find the Hard Drive, or can't find the things needed for booting.
    See if DU even sees it.
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

    Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings 
    in response to Niel
    Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
    Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

    Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
    On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

  • I installed the window 7 os in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume the mac os x?

    i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

    Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

    Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

  • Boot up shows folder with question mark...

    So my imac from 2006 (i think...20 inch plastic intel) booted up today to the blinking folder with a question mark on it. I rebooted into the osx disc to set the hdd as the startup disk, but it didn't show up in the list. Then I tried to see if I needed to repair the hdd using disk utility but the hdd wasn't showing up. So, do I have to replace the hdd? Not looking forward to it if I do.
    Message was edited by: gescamil

    Hi,
    I have had similar issues, you will have to restart it and press and hold the eject disk on the keyboard right away and it will force it out.
    Also to answer you question on way you are not seeing the Hard Drive and way you have the folder with question mark on the start up: is because your Hard Drive is dead.
    You will need to buy another Hard Drive install it and then fresh install the OS X.
    I have seen this issue too many times and every time is resulting with bad Hard Disk Drive...
    Look at the bright side, Hard Drives are cheep now and you have iFix it to assist you on step by step installation. (this is unless you have Apple Care).

Maybe you are looking for

  • Varinat configuration copy of batch characteristics from Sale order to production batch

    hi experts , below is the scenario : the characteristics and its value which are maintained in the sale order must be copied to batch produced during process order GR . it was not available in 4.7 but availbale in ECC 6.0 i guess by SAP. i have creat

  • How do I access old iCloud backups?

    Hi, This forum interface is not exactly user intuitive, so I apologize beforehand if this question has been asked hundreds of times already. I lost my iPhone 4 near the end last year, and purchased a new iPhone 4S to replace it. After using the new i

  • Is there something to download to make videos? ..and not able to open videos

    This is probably a really stupid question, but I did a search and I can't find an answer. When I call CS they just tell me that the phone isn't set up to record videos and that they dont know why I cant open them either. Basically I have a few friend

  • Brush is making dots instead of a line

    Last night in CS5 I was playing with the opacity and spacing of the brush, and now I can't get back to a normal brush. I want just a normal stroke, but the brush is making lots of transparent dots instead. I've switched to Photoshop Elements 7 for no

  • Running Weblogic 7.0

    I have installed weblogic 7.0 in my system. Its main folder is bea under which i have got four folders namely jdk131_03, logs, utils, weblogic 700. Under Weblogic 700, we have got common, ebcc, integration, portal, samples, server, uninstall, worksho