Folders and Files access denied from Server 2008 on Windows 7

I upgraded my server from 2003 to 2008. Now my Windows 7 machines can't open files in the Shared Documents on the server. Error comes back with access denied. Can use remote desktop with a Windows 7 machine and have access to the Shared Documents
folder. Any help as to why getting access denied would be great.

Hi,
Plesase check ntfs permisions and share permssions of the shared folder. You could try to set share permissions to Full Control for the Everyone group to see if the issue still exists.
Share and NTFS Permissions on a File Server
http://technet.microsoft.com/en-us/library/cc754178.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Accessing Dock Sub-Folders and Files

With the implementation of Stacks in Leopard I've noticed that I've lost the ability to access sub-folders and files within folders contained in the Dock. In Tiger I could access any sub-folder or file from the pop-up menu of a folder in the Dock. Using Stacks, I can only access a sub-folder and have its window open.
Does anybody know if there is a way to access the files within the sub-folder without having to open that folder window? I find this a step backward from Tiger as you have to use multiple steps to access a file that may be several folders deep.
Any suggestions would be most welcome.

I might also add, what you see as a step back, there is also a step forward here. Before the only method of sorting the folder contents off the Dock without opening a Finder window was by name. Now you have several methods when you switch from opening in arc to grid mode, by clicking once on the stack and changing the mode from automatic to grid. This shows all the stack items then in any sort view you want once grid is selected.

Accessing Windows Drive its folders and files through KM

Hi All,
I have portal server installed in my laptop with KM, i would like to access windows C drive with all folders and files in my local machine what are the configurations i have to do.
One more thing
In real time scenario can we use CM repository, my requiremtn is to store documents of diffrent king which repository we can use which data base what configurations we have to set, basically what is the difference between internal and external repositories.
regards,
Murali

Hi Murali,
Internal repositories are those which come created in the KM like etc, documents and many more.
External repositories are folders on diff locations (either on server or at other system) which are mapped to KM as repositories.
Now. about ur requirement : You can try mapping the path c:\ as a folder in KM by making a File Repository manager.
For storing different kind of documents you can make different folders in Windows and map them as repositories by configuring File Rep managers for them
See this[ link|http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm] to know about configuring a file repository manager.
I hope it helps.
Regards,
Sumit

HTTP errors and/or access denied messages preventing me from downloading CS5.5

How can I download my copy of CS5.5 Design Standard? I keep getting HTTP errors and/or access denied messages.

Alex5555 where are you downloading the installation files from? Have you tried utilizing a different web browser? Is your web browser configured to accept cookies?

MY system folder, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac) How do I remove them

I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac). For the most part the dupes are an exact copy, but not always. I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas

pacull,
Use iCal>View>Show Notifications to choose what to do with the notification.

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Showing/ Accessing hidden folders and files

Hi,
In order to reinstal an application (Trend Micro sync), I first need to remove a selecion of hidden files that I used on Leopard to find under the account/library/ Application support.... They are "hidden folders and files". Under Lion I don't know how to set the finder to show them to me, especially as I don't remember the name !
Thanks for your help
Stéphane

[What Should Be Invisible Isn't|http://www.pinkmutant.com/articles/toovisible.html]
[Invisible Finder 2.1|http://www.versiontracker.com/php/dlpage.php?id=9867&db=mac&pid=7198&kind=& lnk=http%3A%2F%2Fwww.ragedownload.com%2Finvisfinder.sit] lists just invisible files. JuhOS X lists all files and flags invisible ones. Some applications let you toggle invisibility, though this doesn't take effect until you restart the Finder.
The other thing to do is verify your drive with Disk Utility. Your computer isn't likely to be suddenly deciding to hide files, but aberrant behavior could be an indicator of a corrupt drive.

Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.

I am trying to add Windows 2008 HV host in SCVMM 2008. While adding host i am getting error message...
Error (406)
Access
has been denied while contacting the server <server name>.
Recommended
Action
1.
Verify that the specified user account has administrative privileges on <server name>.
2.
Verify that DCOM access, launch, and activation permissions are enabled on <server name> for the Administrators group. Use dcomcnfg.exe to modify
permissions, and then try the operation again.
I have already done DCOM security modification for my user. I am able to RDP or any file sharing HV host from SCVMM machine. My user is member of local administrator for both the machines.
Before that i have added one Windows 2008 HV (Core) successfully and 2 ESX host in same SCVMM machine.
Any Help would be greatly appreciated.
vaibhav

Has anyone found a fix for this? I've been troubleshooting this issue for 4 days now. I've unjoined/rejoined the host to the domain, deleted SCVMM certificate, given permissions (out the wahzoo) in COM/Access Permissions, all updates installed, firewall
is off (I even tried turning it on and configuring program/port access), I've tried with 3 different domain accounts that are a member of the local Administrators group.
The other day I managed to get the host added (don't ask me how) but then all the VM's were in status 'Host not responding' so I couldn't even manage them. So I removed it and now can't get the host added again. I'm using SCVMM 2008 R2 SP1 and the problem
host is Server 2008 R2 SP1 x64.
Error (406)
Access has been denied while contacting the server xxxxxxxx.domain.com.
Recommended Action
1. Verify that the specified user account has administrative privileges on xxxxxxx.domain.com.
2. Verify that DCOM access, launch, and activation permissions are enabled on xxxxxxx.domain.com for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.
I was getting this error after I got the host added:
Error (2910)
VMM does not have appropriate permissions to access the resource C:\Windows\system32\qmgr.dll on the xxxxxxxx.domain.com server.
(Access is denied (0x80070005))
Recommended Action
Ensure that Virtual Machine Manager has the appropriate rights to perform this action.

[SOLVED] mount.nfs4: access denied by server

Hi folks. I seem to be having a bit of a problem getting nfs4 to work. I am trying to mount a share from alpha (my fileserver) onto charlie (my workstation). Both of these are new Arch systems and I haven't had any nfs working yet, although I have with other distros on the same hardware.
Fileserver (alpha) config:
# /etc/exports
/files 192.164.1.0/24(rw,sync,fsid=0,no_subtree_check)
# /etc/hosts.allow
sshd: 192.168.1.0/255.255.255.0
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
idmapd: 192.168.1.0/255.255.255.0
statd: 192.168.1.0/255.255.255.0
[General]
Verbosity = 3
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nobody
[Translation]
Method = nsswitch
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sda1 /boot ext3 defaults 0 1
/dev/sda2 swap swap defaults 0 0
/dev/sda5 / ext3 defaults 0 1
/dev/sda6 /var ext3 defaults 0 1
/dev/sda7 /home ext3 defaults 0 1
/dev/sda8 /files ext3 defaults 0 1
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs defaults 0 0
nfsd /proc/fs/nfsd nfsd rw,nodev,noexec,nosuid 0 0
DAEMONS=(syslog-ng network netfs rpcbind nfs-common nfs-server hal @alsa @crond @openntpd @sshd)
[root@alpha ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda5 19228276 879492 17372036 5% /
none 507792 140 507652 1% /dev
none 507792 0 507792 0% /dev/shm
/dev/sda1 93307 15887 72603 18% /boot
/dev/sda6 19228276 372632 17878896 3% /var
/dev/sda7 19228276 176224 18075304 1% /home
/dev/sda8 902688436 204872 856629640 1% /files
[root@alpha ~]#
Workstation (charlie) config:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=437982b2-5c84-4f53-954d-cf43f8b4e707 / ext3 defaults 0 1
UUID=97d79d76-357a-4f4e-8513-f181bff6af62 /boot ext3 defaults 0 1
UUID=d8525095-9b97-4439-932f-8f4e0236cce1 /home ext3 defaults 0 1
UUID=ffba933b-af93-407c-b1b8-69d1cc5be146 swap swap defaults 0 0
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs defaults 0 0
alpha:/ /files nfs4 defaults 0 0
[General]
Verbosity = 3
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nobody
[Translation]
Method = nsswitch
DAEMONS=(syslog-ng network crond alsa hal fam rpcbind nfs-common netfs)
[root@charlie ~]# mount -a
mount.nfs4: access denied by server while mounting alpha:/
[root@charlie ~]#
This happens even after both systems are rebooted. Can anyone spot what I am missing?
Thanks for looking.
Last edited by dgregory46 (2009-10-21 01:04:09)

Now I really feel stupid. A little proofreading would have saved me a big headache. In /etc/exports I was exporting to 192.164.1.0/24 while my network is the more standard 192.168.1.0/24.
It works fine now, although I did take phaul's suggestion and added my main share "inside" the nfs4 root.

How can I explore the folders and files on my phon...

How can I explore the folders and files on my phone from my phone (lumia 920)?

the file system including all the data pertaining to that partition is closed on windowsphone8, unlike that of Symbian.
the only part you will be able to see is what you would see in this post here: /t5/Nokia-Lumia/Transfer-file-for-920/m-p/1605954#M24335
the rest is locked unless you have developer access, and even then not much as you would just use the SDK to make your applications.

How to move folders and files using UJFS

Hi guys,
I need to move from one environment to another the folders and files in the structure, cause the backup / restore (UJBR) doesn't move that part, now I need to know how to do it in the transaction UJFS . ( I'm using SAP BPC 7.5 NW Patch 8)
Thanks for your help.
Cheers,
Rodrigo

Thanks for your answer,
In this case, I'm going to move the files and folders from one server to another, so it's not the scenario you mentioned.
Cheers,
Rodrigo

OEL 6.3 - mount.nfs: access denied by server

Hi,
I am trying to mount an NFS directory on a server running OEL 6.3, pointing to another OEL 6.3 server. I get the following error:
[oracle@csdowmsdb503 etc]$ mount 192.x.x.x:/home/oracle/m501/m501_f /home/oracle/m501_f/
mount.nfs: access denied by server while mounting 192.x.x.x:/home/oracle/m501/m501_f
The UIDs and GIDs on each server match. If we use "nfsvers=3" it work, so it seems to be something specific to vers 4. We would like to not use the vers 3 workaround.
Thanks!

Hi,
When I added "- v" I realized it is actually erroring out on vers=4 and defaulting to vers=3 instead. The error it shows is now "No such file or directory."
[oracle@xxx503 m501_g]$ sudo mount -v -t nfs xxx.xxx.xxx.35:/home/oracle/m501/m501_g /home/oracle/m501_g/
mount.nfs: timeout set for Fri Nov 9 10:46:27 2012
mount.nfs: trying text-based options 'vers=4,addr=xxx.xxx.xxx.35,clientaddr=xxx.xxx.xxx.37'
mount.nfs: mount(2): No such file or directory
mount.nfs: trying text-based options 'addr=xxx.xxx.xxx.35'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: trying xxx.xxx.xxx.35 prog 100003 vers 3 prot TCP port 2049
mount.nfs: prog 100005, trying vers=3, prot=17
mount.nfs: trying xxx.xxx.xxx.35 prog 100005 vers 3 prot UDP port 37692
xxx.xxx.xxx.35:/home/oracle/m501/m501_g on /home/oracle/m501_g type nfs (rw)

File access denied

I'm not really a computer savy so can someone help me please! I tried to install a dvd photoshop cs4 extended and all I got was a pop up auto play window that said " file access denied". I have windows 7 and reading some posts I tried to right click on the .exe to run it as an administrative mode but nothing happens when I right click it. Can someone help ?

You say "nothing happens" when you click on the .exe file, do you not get a context menu popping up?
You could try copying the installation package from the DVD to the desktop and trying from there.
[Without wishing to be alarmist, there have been lots of cases of brand new, shrink wrapped copies of Photoshop sold on eBay which turned out to be fakes. See http://forums.adobe.com/message/1636890#1636890]

Help! FCP 6.0.6 Export Failed "File Access Denied"

I use HDV video captured via Firewire with a Sony external HDV deck.
In FCP, I use "Easy Setup", Format: HD / Use: HDV-1080i60.
Export using Quicktime (not quicktime conversion) and set export using HDV 1080i60.
No matter the legnth of the sequence, I will get the error message, "File Access Denied", but not until the end of the export! So it will go until the export should be "done", then give me the error message.
All files are on the computer's hard drive, no external hard drives are used to or from when exporting.
Any help would be appreciated! Thanks in advance!

Did you COMPLETELY UNINSTALL FCP before you reinstalled it?
Trashing the icon is not enough - there may be corrupt files remaining which will ruin the new installation.
This article tells you how, together with other troubleshooting techniques:-
http://support.apple.com/kb/TS1846?viewlocale=en_US
Alternatively you can use FCP Remover but it will clear everything from the FCS set of apps:-
http://www.digitalrebellion.com/fcs_remover.htm

Can't hide Hidden folders and files.

Hi All,
This past weekend I transferred my OS and apps to a newly installed SSD drive.
During the process I had to move some files around in order to get The OS and Apps on the SSD.
I used a technique that utilizes the Terminal and the chflags command.
My issue is now I can not hide the files and folders that are usually hidden.
I can't remember the exact method I used to unhide hidden folders and files. I can't even find a reference to it in my web browsers history.
I have searched on the web for solutions along these lines:
defaults write com.apple.finder AppleShowAllFiles -boolean FALSE ; killall Finder
chflags hidden
sudo chflags hidden
But none of these approaches have worked.
I have downloaded Onyx, TinkerTool and Show Hide Invisible Files.
I have used them as best I understand to hide the normally hidden files and folders, but nothing has worked.
Any Command Line gurus out there have any suggestions?
Many Thanks in Advance!
Tem

Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.finder.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
☞ Does the dialog show "You can read and write" in the Sharing & Permissions section?
☞ In the General section, is the box labeled Locked checked?
☞ What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Folders and Files access denied from Server 2008 on Windows 7

Similar Messages

Maybe you are looking for