Folders created with unexpected characters in the folder's name.
Hi:
In SharePoint 2013 I have routing rules that save documents into folders. The folder is created using the "%2" token that is supposed to create a folder (if it does not exist), based on the value of a field. I am using a field called "Requirement"
(see pic below).
However, when SharePoint creates the folder it prepends the folder name with an integer + semi-colon followed by the uninge field value. For example, if the value for the Requirement field is "R1-1", SharePoint creates a folder called
"2;R1-1" instead of the expected "R1-1".
I have a pics below of the folder that is being created.
Anyone has any ideas why this is happening?
Thanks much.
Norman
This is the folder being created
Hi Norman,
Please refer to the configuration of Content Organizer Rules as below which is working fine in my environment:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support
Similar Messages
-
I'm in iPhone 5. I transfer photos to a Windows 7 PC, using the USB cable. Lately, the photos are appearing in Windows Explorer within monthly folders, with gibberish titles. The folder names will be 8 random letters and numeric characters. I tend to let photos build up, so there are about 2 years worth of these monthly folders… Between 20 and 25. This is a huge hassle… I'm unable to tell what months are in each folder, by the folder name.… Have to open each folder to see which month is in there. I want to be able to look at all the photos on the iPhone in one view, as I was able to in the past. How do I stop this foldering of photos, by months?? Thank you. BC
I have the same issue. I searched and finally got only one answer is -- Apple suggest customer using iMAC to transfer and backup photos instead of Windows. How great the solution is it!
-
I am having issues suddenly exporting files. It reads error exporting 25 files, As I attempt to choose another destination folder the folders show a black square where the folder sign previously was. I am in my busy season and this has created a huge delay!!! HELP!!!!
oh and if you use a creative cloud version of Lightroom it could also be that the logon to the cloud is messed up. Logging out and logging back in from preferences in the creative cloud app will fix that. Due to the release of Lightroom CC it appears that adobe's servers have been overwhelmed a bit And many people have strange problems that are solved by logging out and back in.
-
When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?
Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
When i send an email with greek characters in the body, many recipients (not all) cannot read it.
At the same time when i use the internet mail it can be read successfully by the recipient.
I have already checked the encoding settings in the Fonts in order to be "unicode (UTF-8)".
What else can i check?
Thanks in advance.
e.g:
From: Eleni Kontomari [email address removed by moderator Andrew]
Sent: Thursday, February 27, 2014 12:33 PM
To: "Nikos Totsios (Ηλεκτρονική διεύθυνση)"; "Giannis Diokarantos (Ηλεκτρονική διεύθυνση)"; "Dimitris Papadopoulos (Ηλεκτρονική διεύθυνση)"; Vassilis Gounaris; "Vassos Efthymiadis (Ηλεκτρονική διεύθυνση)"; Νικηφόρος Κεκρίδης; Ιωάννης Αθανασόπουλος; "Alexis Katsivas (Ηλεκτρονική διεύθυνση)"; Μιχάλης Παπαοικονόμου; Fomesa Hellas; "Χρήστος Σπηλιάδης (Ηλεκτρονική διεύθυνση)"; Δημήτρης Μπενάκης; "Ν. Γαλάνης"; [email protected]; "Αποστόλης Σαμούδης (Ηλεκτρονική διεύθυνση)"; "Β. Ντουρτόγλου (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]; "Φοίβη Λεγάκι (Ηλεκτρονική διεύθυνση)"; "Παναγιώτης Κουμεντάκος (Ηλεκτρονική διεύθυνση)"; Σπύρος Ζαφείρης; Hans- Joachim Henn; "Κώστας Αλεξανδρόπουλος (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]
Subject: ΠΡΟΣΚΛΗΣΗ ΤΑΚΤΙΚΗΣ ΓΕΝΙΚΗΣ ΣΥΝΕΛΕΥΣΗΣ ΕΣΥΦ
... 13 2014.
''Please read [[Forum rules and guidelines]] when posting a question in a public forum''There are some language add ons that support emails from other languages that you can check out: [https://addons.mozilla.org/en-us/thunderbird/extensions/language-support/?sort=popular]
The recipient, if they also use thunderbird may need to have a language pack to read the email: [https://addons.mozilla.org/en-US/thunderbird/language-tools/]
You may also need to have them check their interpreter to make sure the email is being received in the same format it is being sent. -
Can I rotate mark ups created with Adobe X on the background page of a PDF document?
Can I rotate mark ups created with Adobe X on the background page of a PDF document?
Thank you for taking the time to reply.
I tried both ways and neither works. It gives me a prompt box that I have to click "next" for every page but after going thru all pages, nothing is sent to the printer.
Also, all directions I've read indicate it will print to the default printer. If my default printer is on a network, will that cause problems....
and...
should I be getting a prompt box on every page? I thought all this would happen behind the scenes and not force me to interact with every page.
dc -
hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance
Hi,
The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
tell application "Microsoft Word" to close every document whose name begins with "book"
The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
So, changing one line ought to do it:
close document incrementvalue -- instead of "close document"
But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
Because of this, if you want to do it in a repeat loop, you have to work backwards:
tell application "Microsoft Word"
set doc_count to count documents
repeat with x from doc_count to 1 by -1
if name of document x begins with "book" then close document x
end repeat
end tell
Hope this helps. -
Content created with v18 tools, crashed the v19 Content Viewer
Hi,
We've been working on a publication using v18 of the DPS tools in InDesign, this works perfectly when viewed with the v18 Adobe Conent Viewer.
Our client has downloaded the Content Viewer to see the work we have done so far, however on viewing certain articles the viewer crashes.
I have installed v19 onto one of our iPads and confirmed that this problem occurs.
I have also created a few test folios, with individual articles and the viewer does not have any problem viewing them, however when I put multiple articles into the same viewer, it starts to crash again.
I've uploaded using both the v18 and v19 versions of the folio builder, and get the same results.
I find it unbelieveable that the Content Viewer does not seem to be backwards compatible with folios created with previous versions of the tools. Is there a way to fix this?
Any insight would be appreciated, my client is getting understandably frustrated.
Thanks
RyanCan you try to re-bundle the content? (perhaps on v19 tools?)
You could post the source files and crash logs to Adobe to see if they can't patch the issue in the v19 viewer. Even if they did, however, it would require a viewer update. -
I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name. Now I have double contacts for everyone with an email address!!! how do I UNDO? it says all CONTACTS WILL BE DELETED...when I go to turn CONTACTS to OFF.
Any contacts synced with the Yahoo account will be deleted from the phone if you turn it off. They will still be out there in Yahoo land, so if you turn it off and it deletes something you didn't want to, just turn it back on again.
It's extremely unclear what you did when you say " I only created contacts and typed in emails that I had for those contacts.....so I am still not sure how to UNdo what I did without deleting anything"
Undo WHAT, exactly? You said "I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name."
Just turn it off. -
Problem in Controlling Area created with 3 characters long
Hi:
I have a "small" problem, perhaps you could help me.
We have created a new Controlling Area, but it is created only with 3 characters, instead of four. We have been working with no problem until me have to create a Purchase Order with some profiles. They cannot create any PO. If we go to SU53 transaction we got the message in object K_PCA. There is a blank in string Responsibility Area, and the system cannot recognize that. This string concatenate CO Area code (and a blank) and Profit Center, but keeps a blank between them.
Do you know how to solve it? We cannot delete CO Area because we have many data created in it.
Thanks in advance.
Best regards.Hi:
I have to try it, but it does not work. In SU53 I have this message:
The following authorization object was checked:
=================
Objeto K_PCA EC-PCA: Responsibility Area, Profit Centrer
Área de responsabilidad CO-OM
PCGLAB0101
Available authorizations for the object in the master record:
Object K_PCA EC-PCA: Responsibility Area, Profit Center
Área de responsabilidad CO-OM
PCGLA B0101
============
There is a blank PCGLA B0101, and not in PCGLAB0101.
I need to delete it in master record or add it in authorization object.
Does anybody how I can change it?
Thanks in advance.
Regards. -
I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?
If the form was created using LCD then it can only be edited there. This
application used to be bundled with Acrobat Pro, but that's no longer the
case. So if you want to edit this file then you need to purchase it, yes.
On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]> -
Problem to get file with special characters in the message
Hi, I'm developing an application that read the email and save the attached file. However, some files have special characters in the name, like: Documento de EspecificaÇÂO.doc
I noticed the de name of the file in de message head is:
"=?iso-8859-1?Q?Documento_de_Especifica=E7=E3o.doc?="
I'm already using the JavaMil 1.4.5
Tha is my code:
package br.com.cesan.helpdesk;
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.util.Properties;
import javax.mail.Flags;
import javax.mail.Folder;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.Part;
import javax.mail.Session;
import javax.mail.Store;
import javax.mail.search.FlagTerm;
public class LerEmail2 {
* @param args
* @throws MessagingException
* @throws IOException
public static void main(String[] args) throws MessagingException, IOException {
// TODO Auto-generated method stub
// Get session
Session session = Session.getInstance(new Properties(), null);
// Get the store
Store store = session.getStore("pop3");
store.connect("pop.xxxxx.com.br", "user", "password");
Folder folder = store.getFolder("INBOX");
//folder.open(Folder.READ_ONLY);
folder.open(Folder.READ_WRITE);
// Show only unreaded Messages
FlagTerm ft = new FlagTerm(new Flags(Flags.Flag.SEEN), false);
// Get directory
Message message[] = folder.getMessages();
//Message messages[] = folder.search(ft);
for (int i=0, n=message.length; i<n; i++) {
System.out.println(i + " - "+ message.getSubject() +" - " + message[i].getSentDate() );
Object content = message[i].getContent();
if (content instanceof Multipart) {
handleMultipart((Multipart)content);
} else {
handlePart(message[i]);
// Close connection
folder.close(false);
store.close();
public static void handleMultipart(Multipart multipart) throws MessagingException, IOException {
for (int i=0, n=multipart.getCount(); i<n; i++) {
handlePart(multipart.getBodyPart(i));
public static void handlePart(Part part) throws MessagingException, IOException {
String disposition = part.getDisposition();
String contentType = part.getContentType();
if (disposition == null) { // When just body
System.out.println("Null: " + contentType);
// Check if plain
if ((contentType.length() >= 10) && (contentType.toLowerCase().substring(0, 10).equals("text/plain"))) {
part.writeTo(System.out);
} else { // Don't think this will happen
System.out.println("Other body: " + contentType);
part.writeTo(System.out);
} else if (disposition.equalsIgnoreCase(Part.ATTACHMENT)) {
System.out.println("Attachment: " + part.getFileName() + " : " + contentType);
saveFile(part.getFileName(), part.getInputStream());
} else if (disposition.equalsIgnoreCase(Part.INLINE)) {
System.out.println("Inline: " +
part.getFileName() +
" : " + contentType);
saveFile(part.getFileName(), part.getInputStream());
} else { // Should never happen
System.out.println("Other: " + disposition);
public static void saveFile(String filename, InputStream input) throws IOException {
if (filename == null) {
filename = File.createTempFile("xx", ".out").getName();
// Do no overwrite existing file
File file = new File(filename);
for (int i=0; file.exists(); i++) {
file = new File(filename+i);
System.setProperty("file.encoding", "iso-8859-1");
FileOutputStream fos = new FileOutputStream(file);
BufferedOutputStream bos = new BufferedOutputStream(fos);
BufferedInputStream bis = new BufferedInputStream(input);
int aByte;
while ((aByte = bis.read()) != -1) {
bos.write(aByte);
bos.flush();
bos.close();
bis.close();
The problem occurs in:
FileOutputStream fos = new FileOutputStream(file);
BufferedOutputStream bos = new BufferedOutputStream(fos);
BufferedInputStream bis = new BufferedInputStream(input);
int aByte;
while ((aByte = bis.read()) != -1) {
bos.write(aByte);
Thanks
Edited by: user10283976 on 30/03/2012 07:36
Edited by: user10283976 on 30/03/2012 07:37
Edited by: user10283976 on 30/03/2012 07:37
Edited by: user10283976 on 30/03/2012 07:38
Edited by: user10283976 on 30/03/2012 07:40
Edited by: user10283976 on 30/03/2012 07:41
Edited by: user10283976 on 30/03/2012 07:42http://www.oracle.com/technetwork/java/javamail/faq/index.html#encodefilename
-
Mac: Problems with certain characters in the editor
I have now downloaded the production version on my Mac and it runs just fine. The first thing I see is that the painting problems with the close icons etc. have been fixed. Thank you for that. But I still have trouble typing certain characters in the editor. I haven't reported that yet, but I have seen others report similar problems caused by missing support for international keyboards. The characters that I cannot type are |\[{]} which is pretty annoying when you're writing Java code. :-) It works fine in normal Java text fields. On my Norwegian keyboard I normally input all these characters by typing 7 and 8 combined with option or option + shift.
Check if database characterset supports these special characters
check client's nls settings.
check client machine's language settings (converts characters in driver level) -
Sorting of contacts with foreign characters in the name
Hello,
I have a large address book, some with Japanese characters in their name.
I'm on English Language setting for the OS on my iphone and ipad.
All the contacts with Japanese characters in their name seem to get pushed to the # section of the alphabet rather than at the equivalent roman alphabet letter.
Also note that adding the Japanese name in the secondary fields of "phonetic first" and "phonetic second" of an existing Roman English based contact sends this to the # section.
This is poor sorting of contacts.
Very poor....After posting this I found a solution. I hadn't tried it this way round.
https://discussions.apple.com/message/7589528#7589528
Go into one of your Japanese contacts and click edit.
Go right to the bottom of the edit page and add field, add phonetic first name, then repeat the step to add phonetic last name.
Now edit the name of your contact, keep their name in Japanese and enter the phonetic spelling in English.
Smashin.... :-) -
Mail acting ery oddly with repeating characters in the to field
When composing a message I enter the first few characters of the person I would like to email and mail.app completes the rest of the entry for me - great
If I then want to put in another name (as I often want to!) then the characters seem to repeat themselves. For example if I want to get my own email [email protected] and I type "j" then "o" and then "n" then this is what I get
"jjojon"
as if this were not bad enough when I press the delete 3 times then this is what the display shows
"jjojonjonjonjon"
so I have to do a ctrl X to cut everything out of the to field and start again.
This is the same for the TO, CC and BCC fields
this problem also exists in the address book when entering in a n email address and also iCal when inviting / notifying guests for a meeting
Any ideas ?
Very odd
Cheers for the help
Jonathanany ideas anyone 10.5.3 update did not fix this - cheers
Maybe you are looking for
-
Is it possible I found a bug in Java Pattern (JDK 1.5)???
It is hard to believe that I should have found an error in the java.util.regex.Pattern class - and I hope you can tell me I'm wrong. Look at this example: Let's say the pattern is "%\d+". I can then easily match against, let's say "%20". If I however
-
Hi everyone... i have a small problem...i would like to read one node in my xml file.... What is the easyest way to do that...i tried the following code...but i hot null result.. import java.io.*; import javax.xml.*; import javax.xml.parsers.*; impor
-
Multiple quotation for one sales order
Hi all, My requirment is to create one sale order that reference from many quotations. From what I try in CRM, when I want to create a follow-up document, I have to start from the quotation and choose create follow-up document then the sale order wi
-
Is there a maximum number of photos/videos you can have in Photoshop Album? (Sorry if has already been answered. I searched but couldn't find anything) Thanks!
-
Previously activated DRM in Aldiko on my android tablet is no longer working
I have previously activated DRM in Aldiko on my android tablet with no problem. I imported a new ebook into Aldiko yesterday, with no problem for this book, but the DRM on all my other previously purchased ebooks was then de-authorized. When I try to