Folders disappear and come back when browsing micr...

Dear all,
Have searched the forums extensively but cannot find the solution to the following problem:
Windows XP SP2
PC suite 6.84 10 3
Nokia 6233
Micro SD 64MB (came with phone)
Bluetooth connection to ACER 803LMi (working ok)
When browsing the phone via PC Suite, all files and folders on the phone memory (C-drive on phone) can be seen and used. However, when browsing the 'Extra' folder on Micro SD card (E-drive on phone) and clicking on a standard subfolder (pictures, music files, etc), then all these folders disappear one by one and directly come back after disappearing. I can't however for example see the music files in the music folder, although they are there when playing them on the phone.
In addition, it happend also when using the pc suite 6.70 rel 25 that came with the phone but it still also happens with 6.84.
Hope someone can help or redirect me in case I missed the topic if already discussed.
thanks,

Hi Miksu,
Yes, when I tried to copy music with PC Suite, it created a new folder 'Music' and that shows in the phonebrowser including the files in there. I then also changed the destination folder in PCS to the standard 'Extra - Music Files', however it then created a new folder 'Music Files' and didn't use the folder already there.
I'll try to copy some new files in all subfolders under 'Extra' and let you know the outcome of what the phonebrowser does. I'm merely a somewhat senior end-user (understanding what is said in the forums) but not really the go-into-all-technical-details guy. I'm really happy with this phone and don't want to crash it already.
Maybe this topic however can help others.
thanks again,
Coffey

Similar Messages

  • On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

    On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

    Click on the Hot Corners..  button and look at the four definitions.  In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop.  Set it to "-" to deactivate.

  • We can not clear all recents(30 recents call).  When Tango show "No recents call". We touch other buttons and come back to Recents button again.  It still show 30 recents call.

    We can not clear all recents(30 recents call).  When Tango show "No recents call". We touch other buttons and come back to Recents button again.  It still show 30 recents call.

    No one here is going to do anything about it. Send feedback to Apple.
    http://www.apple.com/feedback/ipad.html
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?

    I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop?
    Also where exactly on the laptop is teh data stored.
    Thank you!!

    go to 'Edit' in the menu bar. Then choose 'Preferences'.
    you'll see a pop-up and there's a tab called 'Devices' there. If you click that, you will be able to check a box that says 'prevent automatic syncing for iPods, iPads and iPhones' or something like that.
    Hope this helps
    NB: if you don't even see the menu bar that has options like 'File, Edit, View, etc', first click the black/white square button on the top left of your screen, and then click 'show menu bar'. It should pop right up.
    Good luck

  • Display goes off and comes back only when Satellite A210 is restarted

    Hi,
    Satellite A210 displays goes off now and then and comes back only when the machine is restarted.
    Usual runtime runtime 30 or 45 mins
    Please advice
    # Is this a hardware problem or software?
    # Does some one else faced same problem do advice?
    Machine is year and a half old runs windows vista basic that comes with it.
    I have reinstalled the display adapter drivers also the problem remains same

    Hello
    Have you tested an external monitor on the notebook?
    If the external monitor works fine it seems to be an internal display issue and must be replaced.
    Are you running the factory settings on your notebook or have you installed your own Windows version? Before you go to an authorized service provider you should restore the factory settings to determine if its a hardware or software problem. With the factory settings all should work properly and if not in my opinion its a hardware problem.
    Check this!!!

  • How can i delete the contains of my iCloud forever? I deleted erase the files in my iPhone but they come back when i start New backup, even when i erase the files and back ups and logoff.

    How can i delete the contains of my iCloud forever?
    I deleted the files in my iPhone but they come back when i start New backup, even when i erase the files and back-ups.
    When i start a new download, the pictures come back, but they aren't in my iphone.

    wow you too never got NO answer, what nerve its worse then mobileme

  • WHEN I PUT AN MP3 INTO GARAGEBAND TO USE AS A SAMPLE THE SAMPLE CHANGES WHEN I SAVE AND COME BACK TO THE PROJECT, HELP!

    I am using An MP4 that I turned into an Mp3 as a sample on a song.   When I try to use the middle part of the file it just changes to another part of the track.  When I save the project and come back to it the sample is completely different than when I saved it. HELP!

    I believe you have to do Get Info on the file through the Finder (not thru iTunes...search for the track in the music folder on your hard drive) and you should see a toggle arrow for Ownership and Permissions. See if it says Read and Write.

  • Subsequent to Yosemite or updates, my repeating calendar events can not be updated as before. When I update an event (of the repeating event) on my MacBook Pro; its reverts back when I shut it down and come back, and doesn't update other devices?

    Subsequent to Yosemite or updates, my repeating calendar events can not be updated as before. When I update an event (of a repeating event) on my MacBook Pro; its reverts back when I shut it down and come back, and doesn't update other devices?
    Has anyone experienced this and does anyone know a fix?

    This is incredibly frustrating for me too!
    I have a repeated monthly event for a discount at a store that is offered on the first Tuesday of every month. So I have a repeated event taking place on the 1st of every month. In the previous month I reset next month's date from the 1st to whatever date falls on the first Tuesday.
    But ever since upgrading to Yosemite, I am experiencing the same problem as the original person who posted. The date saves on my calendar but does not sync to my iCloud. When I reboot the computer, the date reverts back to the 1st.
    I'm thankful I don't have any events that needed to be tracked because ALL of my previous changes in the past have reverted back to the 1st of the month. I would have been in the same terrible situation as yaz999 in having to manually change every event in previous months.
    Why hasn't this bug been fixed yet???!!!

  • Flickering Screen (blanks out and comes back)

    Hi all,
    since a few days I have a rather weird problem with my mini. The mini is connected via DVI to a Samsung SyncMaster 173T and has been so for the last 2.5 years. Everything worked perfect until....
    Scrolling to a website the screen suddenly went blank (black) and after a second it came back. This happened randomly and various places, always when scrolling with the third mouse button (mighty mouse bluetooth). I could not really reproduce it until this sunday. Fresh boot of the mini, start iTunes and browse the CoverArt with the third mousebutton. After a while (~20 seconds) the screen blanks and comes back. If I continue scrolling in blanks more often and sometimes I can also see strange lines flickering through the screen before it blanks. This is 100 % reproducable.
    So I thought ok, this is probably some graphic card issue. For verification I started Nanosaur (3D-Game), but here no issues. Works just fine.
    I then tried to start the Apple Hardware test from the Install CD (took we a while to figure out how to start it....), but this one seems either not to start or not to give a display after the start. So I can't see the results.
    Additional info: Not did I move my Mac nor my screen. Everything is in the same place like minimum 1 year!
    What can I do to check the root cause ?

    You could try booting into Safe mode (hold down the shift key through a restart until you see a message on the screen that the Mac is starting safe) and run like that for a while to see if the problem goes away or not. If it clears up, then that would imply something about the configuration of your main account is causing the problem. If the problem persist under safe mode, then that would point more to a hardware problem, though I have to say those symptoms are very unique and difficult to account for as a hardware failure.
    You could also try using a regular USB mouse for a while, though it's hard to see how the BT Mighty Mouse could cause this. Good luck.

  • Cancelled print but will not cancel and comes back on to print same job

    cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

    Hi,
    From the Control Panel, open Administrative Tools and select Sevices.  Browse down to the print spooler service, right click it and select Properties then click on the Stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Restart the computer and you should find the job has been removed.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • User clicks one link and goes to other and comes back state maintain prob

    1st say 2 links r there,
    aaa --> if u click on "aaa" (my requirement) as shown below.
    problem : the bean values still maintaining when i go to "bbb" and come back to "aaa".
    ======
    NOTE: when user enters all fields and clicks on button it goes to "second.jsp" their ajax response (1 table) generating. That means page wont get refreshed. (panel is fixed) only down 1 table will generate.
    on FROM DATE AND TO DATE basis.
    if user presses on F5 also state maintaining with the help of bean object.
    i.e, say user in response table clicks on "page 5" then presses on F5 .
    but problem is when user goes to "bbb" link or "ccc" or "dddd" (separate interface or link) which is not related to this
    (they r nearly 50 interfaces or links) and comes back to "aaa" still old response is there.
    NOTE: i can clear the bean object, but if i clear the bean object in "onload" or general i cant handle F5 issue.
    bbb
    ccc
    ddd
    sample
    =====
    first.jsp
    =====
    <jsp:useBean id="sd" class="TestPage" scope="session">
    </jsp:useBean>
    <jsp:useBean id="sptb" class="TestPageBean" scope="session">
    </jsp:useBean>
    <script type='text'/javascript'>
    function testfun()
    --ajax response.
    forwarding to to
    "second.jsp"
    </script>
    <%
    HttpSession mdsession=request.getSession(false);
    if(mdsession!=null){
    String s1=sptb.getTxtname();
    String s2=sptb.getTestselect();
    %>
    <form>
    <table>
    <tr><td><input type='text' name='fromdate' value='fromdate'></td></tr>
    <tr><td><input type='text' name='todate' value='todate'></td></tr>
    <tr><td><select name='testselect''><option value=1>aaa</option></select></td></tr>
    <tr><td><input type='contains' name='txtname' value=''></td></tr>
    <tr><td><input type='button' name='clickname' value='Click' onclick='testfun()'></td></tr>
    </table>
    </form>
    <%
    %>
    second.jsp (this is ajax response)
    =======
    <%
    String txtname= request.getParameter("txtname");
    String testselect= request.getParameter("testselect");
    String fromdate= request.getParameter("fromdate");
    String todate= request.getParameter("todate");
    --storing in bean
    sptb.setTxtname(txtname);
    sptb.setTestselect(testselect);
    sptb.setTxtname(fromdate);
    sptb.setTestselect(todate);
    ---database conn...resultset values retrieved on "fromdate" and "to date" basis
    out.println("<table><tr><td>testeno</td><td></testename></td><td>fromdate</td></tr></td>");
    while(rs.next())
    out.println(rs.getString(3);
    %>
    output
    ====
    input screen
    1 fromdate
    1 todate
    1 selectbox
    1 contains
    1 button
    -> after clicking on button ajax response displayed below is (with out page refresh)
    1 table gets displayed on "FROM DATE" AND "TO DATE" BASIS
    with pagination

    Michael,
    Thanks a lot for the reply.
    In the case you have mentioned, how does application has to know the user is 'moving away'[clicking on other role] from the application.
    Thanks in advance,
    Regards,
    Ganga

  • Windows 8.1 pro N apps open and comes back to start again

    I have just installed windows 8.1 pro N and I have got an issue. the issue is when I download any app from windows store it opens and comes back to start again. I had faced this problem before also.
    I have made a video but cannot send the link

    May I know if this issue happen to all apps?
    Did you try to update your Windows?
    I suspected this issue related to regional setting since you are using N version of Windows 8.1
    Check your country or region setting
    Step 1: Swipe in from the right edge of the screen, and tap Settings.
     (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Settings.) 
    Step 2: Tap or click Change PC settings.
    Step 3: Tap or click Time and language, then tap Region and language.
    Step 4: Under Country or region, look to see that your location is set correctly, and change it if it's not.
    The app is no longer available in the Store
    Maybe this app not available in your country
    Family Safety settings or app locker might be hiding or lock apps
    Contact apps developer if this only happen to spesific app

  • Can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button

    We can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button. Everything seems to be plugged in well. The picture even starts out being sort of dim. And it goes through phases of working fine but then will randomly start blacking out again.  Any ideas?

    Welcome to the Apple Community.
    Have you tried turning the TV off and on again.

  • Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard

    Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard. Anybody any idea what is occurring?

    These Steps should resolve your issue
    Step by Step to fix your Mac
    If you don't have a backup of your data off the machine
    Most commonly used backup methods
    If you can't boot the machine and need to get data off it
    Create a data recovery/undelete external boot drive
    Your options for data recovery
    My computer is dead, is my personal data lost?
    Secure data removal
    How do I securely delete data from the machine?
    More:
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

  • Audio drops and comes back out of sync but dvd preview ok

    hi All,
    i put some photos and videos together in idvd project. The used one of their standard sound tracks to give the background music. The preview looked great so i burned the dvd but to my surprise when a particular video played around 8 min into the dvd the audio dropped and came about a min later with other photos getting it totally out of sync. I have tried removing few photos before that video comes to shift the video's location, there is a minor effect, it playes the clips audio in sync for slightly a sec or two longer but then drops and come back out of sync when it is showing still photos.
    thanks in advance.

    We have heard nothing about any changes in Encore for CC. I would be very surprised if anything fundamental, like the preview engine, has changed. We really don't know what is still the old sonic authorcore, what may have changed but is still sonic, and what is Adobe created. I have always assumed the preview is sonic.
    Is the audio sync issue Bluray only, H.264 bluray only, or any particular audio formats? I don't recall getting the issue in Encore DVD playback.

Maybe you are looking for