Folders in Drive not loading data
I have a 2006 Mac Pro running 10.7 that I use as a Media Server.
Latley when I go to access data from a fairly large folder(several hundred giga bytes) it does not load or takes a very long time to load.
I transfered all data to another drive and the same thing occurs.
Is their a file size limit for each folder? Doing reasearch online I foudn that there is a theoretical limit but it is very large.
Does anyone have any insight?
Thanks,
Jason K
Is that drive full or 60% free? a good solid 7.2k drive of say 2TB from WD Black series or another enterprise drive?
What and where is your boot drive? The best upgrade I made to my 1,1 was the 3rd and newest Samsung SSD. now $160 for 250GB makes Lion (or SL) run like the wind, loading apps, booting, managing, and all the data is and should always, no matter what, not be on t he boot drive. Assume it isn't anyway in your case either.
Similar Messages
-
Hi, just recently when I attemted synced my ipod touch 5th generation, i got a message saying
"Itunes could not load data from sync services reconnect or try again later
I am running the latest version on itunes (not quiet sure which specific one)
I am running ios 6.1 my ipod is not jail broken
don't know what to do
I then cleard the message and my ipod showed up and began to sync
however it is staying at the backing up stage for 12 hours
Not sure what to do help!Try:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
"load data class" -
Cuda driver not loaded as startup item in mountain lion any solution ?
cuda driver not loaded as startup item in mountain lion any solution ?
i use a softare that need nvidia cuda driver installed on systemHi,
the NFSv4 domain name is not necessarily related to the host name or the host's fully-qualified domain name (FQDN). It can be the same like the domain name, but it does not have to.
To find the corrent NFSv4 domain name, you have to look it up in the NFSv4 server's configuration files.
Kind regards,
Steffen -
Hi
We running windows server with ERP 6.0 and this was coppied from another server.
The JSPM fails with the following error.
Trouble Ticket Report
Java Support Package Manager for SAP NetWeaver'04s
SID................: $(/J2EE/StandardSystem/SAPSystemName)
Hostname...........: $(/J2EE/SAPGlobalHost)
Install directory..: $(/J2EE/StandardSystem/SAPSIDDirectory)
Database...........: $(/J2EE/DBSystem/DBInfoName)
Operating System...: $(/J2EE/StandardSystem/CentralInstance/J2EEEngineInstanceHost/OpSysType)
JDK version........: $(/SystemProperties/JavaVersion) $(/SystemProperties/JavaVendor)
JSPM version.......: $(/MAIN_VERSION)
System release.....: $(/J2EE/StandardSystem/Version)
ABAP stack present.: $(/J2EE/StandardSystem/BCSystemPresent)
The execution ended in error.
Could not load data model com.sap.sdt.jspm.model.JspmDataModel. See previous messages.
Class with name com.sap.sdt.j2ee.model.NWDISystemRole not found.
More information can be found in the log file .
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.tools.model.LoadException
Could not load data model com.sap.sdt.jspm.model.JspmDataModel. See previous messages.
JSPM_MAIN
JSPMPhases
NetWeaver Upgrade
SAPJup
Java Upgrade
SAPJup.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[D:
usr
sap
ERP
DVEBMGS10
j2ee
JSPM
log
log_2008_11_17_12_39_25
SAPJup.LOG]/>
<!PATTERN[SAPJup.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5 #C0000A0A0A3D00000000000F010E329300045BE031D40CA8#1226918373625#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.build.BuilderDirector.extractElements(BuilderDirector.java:132)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.build.BuilderDirector.extractElements(BuilderDirector.java:132)#Java###Tag with name found.#2#ControlUnit#JSPM#
#1.5 #C0000A0A0A3D000000000010010E329300045BE031D577F0#1226918373718#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.build.BuilderDirector.createUnits(BuilderDirector.java:186)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.build.BuilderDirector.createUnits(BuilderDirector.java:186)#Java###Creating control unit .#1#JSPM#
#1.5 #C0000A0A0A3D000000000011010E329300045BE031D6E720#1226918373812#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ExecutionDialog.showWelcomeDialog(ExecutionDialog.java:421)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ExecutionDialog.showWelcomeDialog(ExecutionDialog.java:421)#Java###Could not process dialog because execution dialogs have been suppressed.#1#JspmWelcomeDialog#
#1.5 #C0000A0A0A3D000000000012010E329300045BE031D6E720#1226918373812#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#Java###Starting execution of action with name and type .#2#Unit#JSPM#
#1.5 #C0000A0A0A3D000000000013010E329300045BE032541218#1226918382015#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#Java###Starting execution of action with name and type .#2#Modul#JSPMPhases#
#1.5 #C0000A0A0A3D000000000014010E329300045BE032541218#1226918382015#/System/Server/Upgrade/Jump##com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.pce.ctrl.ActionExecutor.execute(ActionExecutor.java:103)#Java###Starting execution of action with name and type .#2#Phase#JSPM_MAIN#
#1.5 #C0000A0A0A3D000000000015010E329300045BE0333D02E8#1226918397281#/System/Server/Upgrade/Jump##com.sap.sdt.tools.model.AbstractDataModelElement.getClassByName(AbstractDataModelElement.java:743)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.model.AbstractDataModelElement.getClassByName(AbstractDataModelElement.java:743)#Java###Class with name com.sap.sdt.j2ee.model.NWDISystemRole not found.##
#1.5 #C0000A0A0A3D000000000016010E329300045BE0333D3D80#1226918397296#/System/Server/Upgrade/Jump##com.sap.sdt.tools.model.DataModel.load(DataModel.java:89)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.model.DataModel.load(DataModel.java:89)#Java###Could not load data model com.sap.sdt.jspm.model.JspmDataModel. See previous messages.##Hi Patrick ,
What user did you use to start JSPM? Was it <sid>adm? Also based on the error it seems there is something wrong with DataModel.xml JSPM uses. And you've mentioned it was copied from another system if I get it right.
So as a quick workaround you could try removing:
- Jspm.DataModel.xml
- Jspm.J2EE.DataModel.xml
- Jspm.JSPM.DataModel.xml
from ../j2ee/JSPM/data/variables directory and give JSPM another try.
Please make sure the rest of the XMLs are in place otherwise JSPM won't start.
Regards,
Vasil -
Usb hard drive not loading after security update
usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call. -
Device detected driver not loading correctly per windows
Device detected but driver not loading correctly. Windows says to reload driver. I have reloaded driver and the Nidaq software package (ver 6.9.3) repeatedly to no avail.
Upgrading from old machine that had a 1997 version of driver that work fine under this OS (win98SE).
What could be the problem?It's possible the copy of the NI-DAQ driver you have is corrupt, you may want to download it again. It's available from the Drivers and Updates page. Also, if you did not already do so, remove the DAQ card before uninstalling the driver and then reinstall it before reinserting the DAQ device.
What DAQ device are you using? Depending on what DAQ device you have, you may want to upgrade the driver, the most recent version of the NI-DAQ driver for Windows 98 is 7.1. You can see what driver is best for your device from the DAQ Acquisition Installer/Configuration Troubleshooter and then download the driver from the Drivers and Updates page.
Let me know if this doesn't solve your problem!
Micaela
Micaela N
National Instruments -
Why does my dvd drive not load
why does my dvd drive not load
It might be broken. Take your machine to your local Apple Store or an AASP for a free diagnosis and estimate for repair.
Clinton -
If my disk drive is NOT loading cds, dvds, etc., what fix is suggested?
PS - your Mac is Intel. G5 is the previous processer, it can't be both
-
OutlineLoad utility not loading data
Hello,
I am loading data into Workforce Planning 11.1.2.1 with OutlineLoad utility (In "Administration>Data Load Settings" Data Load Dimension is "Employee", Driver Dimension is "Account" with loaded account members listed).
I load accounts of "Date" data type which are in "yyyymmdd" format in my CSV file - so these accounts are not loaded.
I will be very grateful for any hints on how to resolve my issues!
Thank you!
Edited by: Jedi Knight on Sep 20, 2012 2:21 PMI am not sure which patch version you are running but from 11.1.2.1.102 there was an additional parameter available for when loading date type members.
"The date format setting for accounts of type “Date” was not always respected in the Outline Load Utility. This patch resolves this issue. It also enables youto override the date format defined in the ‘Attribute Date Format’ setting in the ‘Application Settings’ dialog using the new “/DF” parameters:
· /DF:MM-DD-YYY
The date data type values on a data load are assumed to be month-day-year. For example, 12-23-2011
· /DF:DD-MM-YYYY
The date data type values on a data load are assumed to be day-month-year. For example, 23-12-2011
· /DF:YYYY-MM-DD
The date data type values on a data load are assumed to be year-month-day. For example, 2011-12-23
This is a sample .csv file and command parameters:
Value,Driver Member,Data Load Cube Name, Point-of-View
12-22-2011,aDate,Plan1,"e1,Local,Jan, Current, BU Version_1, FY11"
OutlineLoad /A:<app name> /U:<admin user name> /DF:MM-DD-YYYY /I:c:\<.csv file name> /TR /L:c:/ outlineLoad.log /X:c:/outlineLoad.exc"
Cheers
John
http://john-goodwin.blogspot.com/ -
Sd card module/driver not loaded anymore
Hi,
since a recent update (linux 3.16 maybe ? ) the sd card module is not loaded anymore.
I have to load it manually :
modprobe -v rtsx_usb
(or add a module load in /etc/modules-load.d/)
My guess is that the "block" hook is not finding it anymore...
Any idea why ?
# uname -a
Linux azerty 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64 GNU/Linux
# /etc/mkinitcpio.conf :
HOOKS="base udev autodetect modconf keymap block lvm2 encrypt filesystems keyboard fsck"
sdcard NOT working:
# lsmod | egrep 'mmc|sdhci|sd'
sd_mod 44356 5
crc_t10dif 12431 1 sd_mod
scsi_mod 142915 2 libata,sd_mod
sdcard working:
#lsmod | egrep 'mmc|sdhci|sd'
rtsx_usb_sdmmc 25280 0
mmc_core 110475 1 rtsx_usb_sdmmc
rtsx_usb 17487 2 rtsx_usb_sdmmc,rtsx_usb_ms
led_class 12859 3 rtsx_usb_sdmmc,iwldvm,asus_wmi
sd_mod 44356 5
crc_t10dif 12431 1 sd_mod
scsi_mod 142915 2 libata,sd_modWell, in fact it's a bit weirder...
I'm loading the rtsx_usb module at boot.
Then I plug my sd card :
Sep 05 13:51:24 azerty kernel: mmc0: new ultra high speed SDR50 SDHC card at address aaaa
Sep 05 13:51:24 azerty kernel: mmcblk0: mmc0:aaaa SU16G 14.8 GiB
Sep 05 13:51:24 azerty kernel: mmcblk0: p1
It's not mounting... 10 seconds later :
Sep 05 13:51:34 azerty kernel: ehci-pci 0000:00:1a.0: dev 1.4 ep2in scatterlist error -104/-110
Later on:
Sep 05 13:51:54 azerty systemd-udevd[229]: worker [3393] /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/rtsx_usb_sdmmc.3/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk0p1 timeout; kill it
Sep 05 13:51:54 azerty systemd-udevd[229]: seq 2164 '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/rtsx_usb_sdmmc.3/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk0p1' killed
Sep 05 13:51:55 azerty systemd-udevd[229]: worker [3393] terminated by signal 9 (Killed)
Still not mounted obviously.
Now, I add another module :
# modprobe -v sdhci
insmod /lib/modules/3.16.1-1-ARCH/kernel/drivers/mmc/host/sdhci.ko.gz
Sep 05 13:53:38 azerty kernel: sdhci: Secure Digital Host Controller Interface driver
Sep 05 13:53:38 azerty kernel: sdhci: Copyright(c) Pierre Ossman
I remove the card and insert it again:
Sep 05 13:53:51 azerty kernel: mmc0: card aaaa removed
Sep 05 13:53:57 azerty kernel: mmc0: new ultra high speed SDR50 SDHC card at address aaaa
Sep 05 13:53:57 azerty kernel: mmcblk0: mmc0:aaaa SU16G 14.8 GiB
Sep 05 13:53:57 azerty kernel: mmcblk0: p1
Sep 05 13:53:57 azerty org.gtk.Private.UDisks2VolumeMonitor[1554]: libbluray/bdnav/index_parse.c:162: indx_parse(): error opening /run/media/olivarch/6663-3733/BDMV/index.bdmv
Sep 05 13:53:57 azerty org.gtk.Private.UDisks2VolumeMonitor[1554]: libbluray/bdnav/index_parse.c:162: indx_parse(): error opening /run/media/olivarch/6663-3733/BDMV/BACKUP/index.bdmv
Sep 05 13:53:57 azerty kernel: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Sep 05 13:53:57 azerty udisksd[1409]: Mounted /dev/mmcblk0p1 at /run/media/olivarch/6663-3733 on behalf of uid 1000
Now it's working...
I tried to load both rtsx_usb and sdhci at boot but it doesn't work, it seems that I need to do it manually...
Weird. -
Report does not load data initially
I have a standard report, with radio buttons and select dropdown to specify some query conditions. I have more than one pages with similar structure.
A strange thing happening is:
One of page does not initialy load data. It seems the query was not being executed when the page start up.
I have checked the default values of those radio buttons and select drop downs, there are all set when the page is loading up. I have page computation to set them up. The report always return "No Data" when first time login. But as soon as the page is submitted ( without make any change) , the report is perfectly shown up.
Anybody has any idea? Thanks.Hi,
When you login, check from session state (developer toolbar) that items do have value.
I do not know your Apex version so I post link to latest version document
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/concept.htm#sthref104
You probably need do before/after header computation for items you use in report query where clause
Regards,
Jari -
SQL loaded not loading data from csv format to oracle table.
Hi,
I trying to load data from flat files to oracle table,it not loading decimal values.Only character type of data is loaded and number format is null.
CONTROL FILE:
LOAD DATA
INFILE cost.csv
BADFILE consolidate.bad
DISCARDFILE Sybase_inventory.dis
INSERT
INTO TABLE FIT_UNIX_NT_SERVER_COSTS
FIELDS TERMINATED BY ',' optionally enclosed by '"'
TRAILING NULLCOLS
HOST_NM,
SERVICE_9071_DOLLAR FLOAT,
SERVICE_9310_DOLLAR FLOAT,
SERVICE_9700_DOLLAR FLOAT,
SERVICE_9701_DOLLAR FLOAT,
SERVICE_9710_DOLLAR FLOAT,
SERVICE_9711_DOLLAR FLOAT,
SERVICE_9712_DOLLAR FLOAT,
SERVICE_9713_DOLLAR FLOAT,
SERVICE_9720_DOLLAR FLOAT,
SERVICE_9721_DOLLAR FLOAT,
SERVICE_9730_DOLLAR FLOAT,
SERVICE_9731_DOLLAR FLOAT,
SERVICE_9750_DOLLAR FLOAT,
SERVICE_9751_DOLLAR FLOAT,
GRAND_TOTAL FLOAT
In table FLOAT are replaced by number(20,20)
SAmple i/p from csv:
ABOS12,122.46,,1315.00,,1400.00,,,,,,,,1855.62,,4693.07
Only abos12 is loaded and rest of the number are not loaded.
Thanks.Hi,
Thanks for your reply.
Its throwing error.
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table FIT_UNIX_NT_SERVER_COSTS, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
HOST_NM FIRST 255 , O(") CHARACTER
SERVICE_9071_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9310_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9700_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9701_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9710_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9711_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9712_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9713_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9720_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9721_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9730_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9731_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9750_DOLLAR NEXT 255 , O(") CHARACTER
SERVICE_9751_DOLLAR NEXT 255 , O(") CHARACTER
GRAND_TOTAL NEXT 255 , O(") CHARACTER
value used for ROWS parameter changed from 64 to 62
Record 1: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 2: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 3: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 4: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 5: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 6: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 7: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 8: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 9: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 10: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Record 11: Rejected - Error on table FIT_UNIX_NT_SERVER_COSTS, column GRAND_TOTAL.
ORA-01722: invalid number
Please help me on it.
Thanks, -
According to sql loaders log file, I was successful in loading my data into a table. However the table does not show any values loaded - all empy.
Here's my table:
SQL> desc patients
Name Null? Type
PATIENT_ID NOT NULL NUMBER(38)
MEDSUBSCRIBERID VARCHAR2(200)
MEDMEMBERID VARCHAR2(50)
MEDDEPSEQDESC VARCHAR2(50)
MEDMEMBERGENDER VARCHAR2(50)
MEDMEMBERDOB DATE
MEDDEPSEQCODE VARCHAR2(50)
NETWORKID NUMBER(38)
NETWORKCODE VARCHAR2(50)
PATIENTAGE NUMBER(38)
PATIENTNAME VARCHAR2(50)
PATIENTLASTNAME VARCHAR2(50)
PATIENTSEX VARCHAR2(50)
PATIENTSSN VARCHAR2(50)
INTMEDSUBSCRIBERID VARCHAR2(50)
DATE_VALUE_ID NUMBER(38)
DOB VARCHAR2(50)
AGE_GROUP_ID NUMBER(38)
ORGANIZATIONNETWORK_ID NUMBER(38)
ORGANIZATION_ID NUMBER(38)
ORGANIZATIONCODE VARCHAR2(50)
NETWORKID_HOLD NUMBER(38)
PATIENTRELATION VARCHAR2(50)
Here's my SQL Loader Control File:
LOAD DATA
INFILE 'patients.dat'
APPEND
INTO TABLE PATIENTS
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS
PATIENT_ID INTEGER(8) NULLIF(PATIENT_ID=BLANKS)
, MEDSUBSCRIBERID CHAR NULLIF(MEDSUBSCRIBERID=BLANKS)
, MEDMEMBERID CHAR NULLIF(MEDMEMBERID=BLANKS)
, MEDDEPSEQDESC CHAR NULLIF(MEDDEPSEQDESC=BLANKS)
, MEDMEMBERGENDER CHAR NULLIF(MEDMEMBERGENDER=BLANKS)
, MEDMEMBERDOB DATE "YYYY-MM-DD HH24:MI:SS" NULLIF(MEDMEMBERDOB=BLANKS)
, MEDDEPSEQCODE CHAR NULLIF(MEDDEPSEQCODE=BLANKS)
, NETWORKID INTEGER(8) NULLIF(NETWORKID=BLANKS)
, NETWORKCODE CHAR NULLIF(NETWORKCODE=BLANKS)
, PATIENTAGE INTEGER(8) NULLIF(PATIENTAGE=BLANKS)
, PATIENTNAME CHAR NULLIF(PATIENTNAME=BLANKS)
, PATIENTLASTNAME CHAR NULLIF(PATIENTLASTNAME=BLANKS)
, PATIENTSEX CHAR NULLIF(PATIENTSEX=BLANKS)
, PATIENTSSN CHAR NULLIF(PATIENTSSN=BLANKS)
, INTMEDSUBSCRIBERID CHAR NULLIF(INTMEDSUBSCRIBERID=BLANKS)
, DATE_VALUE_ID INTEGER(8) NULLIF(DATE_VALUE_ID=BLANKS)
, DOB CHAR NULLIF(DOB=BLANKS)
, AGE_GROUP_ID INTEGER(8) NULLIF(AGE_GROUP_ID=BLANKS)
, ORGANIZATIONNETWORK_ID INTEGER(8) NULLIF(ORGANIZATIONNETWORK_ID=BLANKS)
, ORGANIZATION_ID INTEGER(8) NULLIF(ORGANIZATION_ID=BLANKS)
, ORGANIZATIONCODE CHAR NULLIF(ORGANIZATIONCODE=BLANKS)
, NETWORKID_HOLD INTEGER(8) NULLIF(NETWORKID_HOLD=BLANKS)
, PATIENTRELATION CHAR NULLIF(PATIENTRELATION=BLANKS)
Here's data file that I'm trying to load:
2|001321666|00132156801||M|1944-01-22 00:00:00||42|7215||Donald|Duck||||52616|19440666|4|42|2|WELLS|42|E
3|001321999|00132156802||F|1951-09-01 00:00:00||42|7215||Mickey|Mouse||||55395|19510999|3|42|2|WELLS|42|W
4|001363888|00136366201||M|1955-05-22 00:00:00||42|7215||Daffy|Duck||||56754|19550777|3|42|2|WELLS|42|E
And, my log file after executing sql loader successfully but the data does not load:
Table PATIENTS:
3 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 251776 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 3
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Wed Aug 20 11:51:51 2008
Run ended on Wed Aug 20 11:51:57 2008
Elapsed time was: 00:00:05.47
CPU time was: 00:00:00.02Very strange.
Did you connect as the same user as SQL*Loader when you checked the table?
Is it possible that someone else deleted the data? -
Hard drive not loading, done AP test
I Have an iPod Classic 80GB, purchased in 2007. all I'm getting on the screen is a circle with a cross in it. Have done the AP tests and the hard drive is not loading.
Hello janicefromsudbury,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iPod classic is not fully functioning, I'd like you to please follow the guide in the article below.
Apple - Support - iPod - iPod classic Troubleshooting Assistant
Take care,
Alex H. -
PDF printer driver not loading
Ok...first off I had CS on another laptop and the driver was there. Got new laptop loaded CS and PDF printer didn't load up. Second. I got and loaded CS3 (not just because of the lost printer driver, but...) and loaded it onto the same *new* laptop and STILL not PDF printer driver. I've looked at the downloads and can't find it available there. This is driving me nuts. I develop proposals and other documents in word (not to mention the PIA factor of not being able to print directly to PDF in AI or PS) and have to dump files to a shared directory so that I can use Acrobat Pro 6 on a desktop before sending out to clients. Arrrrrgghhh (and yes, I know that Talk Like a Pirate Day isn't until Sept 19th.)
I have tried reinstalling or 'fixing' ABPro umpteen times now and find myself fulfilling Einstein's definition of insansity. Any ideas on what I can do to get a *&^%# PDF printer driver to load?Hi Daniel,
I´m using AutoVue 3D Professional Advanced 20.2.0.... I´ve read that there were problems
in the version 19.xx (before version 20.xx)
Best,
Merkowitsch
Maybe you are looking for
-
Setting up more than one Ipod on same computer
I have had an Ipod for a year. My wife just purchased one and wants to set it up on my computer. Can she use my same computer yet not use my Ipod downloads???
-
How to add row in multiple view object based on common entity object.
Hi , I have Jdeveloper version - 10.1.3.3.0 Oracle Database - 11g R2 I have a situation where i have to show data from one table in three adf tables on jsf page depending on a flag value in a column in table. For this purpose i have done the followin
-
My Mac has been running slow, how can i fix this?
I ran etrecheck here is my info., and any advice on how to get the cleanmymac2 cleaned off my computer. Hardware Information: MacBook Pro (13-inch, Mid 2010) MacBook Pro - model: MacBookPro7,1 1 2.66 GHz Intel Core 2 Duo
-
Hi, We are doing EDI Inbound for PO. For this I need to define the port(Sender Port) as in the control record(i.e as they r sending) .If they change their port it is not working what shold I do for this. regds, Vinsa.R
-
I did not realize I made any changes but my Clone Stamp nor my Healing brush have any effect & the circle is white. How do I reset to default or correct his problem. Dave, [email protected]