Folders List In Develop Mode

Hi,
Recently I read something about being able to change the display of folder names so that the top level folder shows in the display. Whatever the steps were, I tried them and got a longer folder name. For example, "Pictures 2009\Photo Walks\2009-03-05" is displayed in the folder list. I can't find a way to revert to the normal folder display. I would appreciate information on how to return to the default folder display.
Thanks,
Jim

Right click on top level folder to open the context menu then choose Promote Subfolders.

Similar Messages

I am an absolute newcomer to Lightroom. I have downloaded images from camera (OMD EM1) and divided them into folders. Some folders work ok in Develop mode. With other folders I get the words "This file could not be found". What should I do

As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found". What should I do?

may i suggest opening the files in Olymous Viewer 3 and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files
The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
. The tiff files just LOOK better in LR after the conversion . there is a youtube on this subject and when i tried it myself i was impressed

JDeveloper IDE: Developer Mode Error

Hi All,
I am facing an issue after launcing JDEV through /jdevbin/NT/1223_db2dbg_17007206 (JDeveloper IDE for Release 12.2.3 Dev Build 2).
I am getting developer mode error after launcing my application. For the error to perish, we need to disable the same by :
Go Project Properties -> Oracle Applications -> Run Options and remove OADeveloperMode from the selected list.
However the OADeveloperMode option is not visible at project properties. Any idea on how to disable the option through any other means or any workarounds.
The profile “FND:Developer Mode” is already set to No in site level in environment. I am still seeing the Developer Mode error in jdev.
Thanks in advance.
Regards,
Arpita

Hi Shobit,
Error message :
(This developer mode error is thrown instead of being registered due to the lack of the page context object.) The OA passivation framework coding standard has been violated. Web bean properties cannot be modified in the controller processFormData or processFormRequest method. Web bean properties should be modified in the processRequest method only. An attempt to modify a web bean has been made in the following call stack: java.lang.Throwable at oracle.apps.fnd.framework.OACommonUtils.getCallStack(OACommonUtils.java:822) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.setAttributeValue(OAWebBeanHelper.java:1857) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.setAttributeValue(OAWebBeanHelper.java:1891) at oracle.apps.fnd.framework.webui.OAWebBeanFormElementHelper.setAttributeValue(OAWebBeanFormElementHelper.java:2108) at oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean.setAttributeValue(OAMessageLovInputBean.java:616) at oracle.cabo.ui.beans.form.TextInputBean.setRequired(TextInputBean.java:441) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:743) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursive(ClientUtil.java:704) at oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO.setPageReadOnly(ClaimUpdateCO.java:425) at oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO.processFormRequest(ClaimUpdateCO.java:239) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:854) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1241) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1066) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1032) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:887) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1066) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1032) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:887) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:3113) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1897) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:558) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:446) at _OA._jspService(_OA.java:72) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:226) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:127) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:116) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:662)
This error part of the file (oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO) present in the error message is an already existing code.
Now the problem with solving this issues may end up solving many other issues. I am also not sure that my solving one part will fix it or not.
If you can please help me with suppressing the option how we used to do that earlier via jdev, then I can move ahead with my changes and test them.
Thanks,
Arpita

Lightroom 4 Bug: can only see photos in Library mode, not develop mode

This may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders

This happened to me, too, after importing a couple older LR3 catalogs (upgrading/consolidating). I could see the photo in Library module but when I pressed "D" (single photo selected) I was getting the "no photo selected" error message--for every photo I tried. I wasn't able to open any photos at all in the develop module. (These were photos that were fine before installing LR4 and upgrading.) Photos were from imported LR3 and LR4 Beta catalogs.
I restarted and everything seems ok--for now!
So if you come across this thread with this same issue, restart and see if that helps. (Before restarting LR I optimized as suggested above, which did nothing for the "no photo selected" issue. And this isn't related to the parent folder issue, I left my photos in the same place and didn't have more than 3k photos in any of the parent folders. I read in other threads that people had the issue again after importing other catalogs. I'm about to do that so I'll report back.

Why are my processed images now sharper in the Library mode than in Develop mode (LR5)?

In LR 5. Recently I noticed my processed images are sharper in the Library mode than in the Develop mode. This makes doing adjustments difficult because I can't really tell the effect of the adjustments.
PC, i7, 24GB RAM.
I've tried purging the Camera Raw cache. It's been suggested to purge the Preview cache but I cannot find the Preview cache file. It's also been suggested to clear the Preferences but those file don't show up in a search either even though my PC search is set up to show hidden files and folders.
Any solutions?

Images can be different between the camera-rendered preview you see before Import and the default Adobe rendering, but after import the thumbnail in the LR grid view shouldn’t be a different tone than the image in the main area. Is that what you’re saying you’re seeing?
Can you show us a screenshot with both the thumbnail filmstrip and the central area visible as well as the histogram?

I am unable to open images in Develop Mode in Lightroom 5.4. I keep getting system crashes. Now they wont even open images up at all in any mode.

I have Lightroom 5.4 under the CC from Adobe. EVerytime i opened an image up in Develop mode, the program would crash and Microsoft would tell me its stopped working. After playing around with it, now it wont even open up images in ANY of the modes, WHAT IS GOING ON WITH LIGHTROOM ?!?

First of all, if you don't know much about how applications work inside of the OS, its wise to not look in the application folder(s). Deleting anything here can make your apps go haywire. If this happened, then you are best to 1)unregister photoshop, 2) uninstall your entire suite. 3) reinstall the suite and finally 4) reregister photoshop.
All images/textures/photo's including dng, cr2 and nef files need to be stored in your pictures folder and no where else, unless you're an intermediate user on your OS. In your pictures folder you can create folders for organizing the pictures whether by location, season's, time, or file format.
Then when you back up you can just drag a copy of the files to another drive including cd's or dvd's.
This will make sure you don't accidently delete important app files.
All this said, my OS of choice is Windows, so if anything does not sound right, thats why.
Hopefully this helps...

My folders list on FF Bookmarks has expanded to cover the whole screen; folders titles are only one word, so excessive length is not the answer. length is

Two weeks ago I wrote that my bookmarks list had expanded to cover almost the whole screen; this was my mistake. I meant to say that it is the list of my '''folders''' under the FF Bookmarks menu which is now displayed on a much wider screen than they were originally. When opening a folder, the list of bookmarks is correspondingly wide. I have tried shortening the titles of bookmarks, to no avail. My folder tiles are only one word in length.
Navigation of this much wider folders list is also erratic and not smooth, as it was before this change occurred.
Thanks for your help.

I want to thank Grospen for the solution to my problem. I started TB in the safe mode as he suggested and followed his instructions and behold I got the original start page back. I still have to add a few things but because I now know that I can get back to to the factory default settings I won't hesitate to try some of the options that are available. Thanks to all for a job well done.

Develop Mode: Why Do Some Controls Do Nothing

I recently edited a 150 photos. I notice that certain controls in develop mode have no impact when I make adjustments. A good example is Sharpening. There are no changes to the Histogram (you can tell by the motion) or in the image swatch shown above Sharpening. Changes to chromatic aberration and noise reduction also have no impact. Is this a function of the camera, RAW files, or what? This isn't a complaint. I am just curious whether my experience is universal (which I doubt because why would Lightroom have the controls) or a result of my camera, lens, camera setting, or subject matter choices.
Thanks
Jack Siegel

You need to be view an image at 100% pixel view or higher to see the effects
of the adjustments you listed. This is by design.
Eric
I recently edited a 150 photos. I notice that certain controls in develop
mode have no impact when I make adjustments. A good example is Sharpening.
There are no changes to the Histogram (you can tell by the motion) or in the
image swatch shown above Sharpening. Changes to chromatic aberration and
noise reduction also have no impact. Is this a function of the camera, RAW
files, or what? This isn't a complaint. I am just curious whether my
experience is universal (which I doubt because why would Lightroom have the
controls) or a result of my camera, lens, camera setting, or subject matter
choices.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

Can I add metadata to a develop mode panel

I am using Lightroom 5. In the Develop mode, is there a way to add a metadata item to a panel. I shoot with several cameras and the way I process an image depends on the camera I used. I would like to add the "Camera Model" to the Histogram panel just under the ISO, Lens length, f stop, and shutter speed. Now I must flip back and forth between Library and Develop to get the information.
Thanks for helping
Jim

Jim
I don't think there is any way to change what shows in the panels, but you can achieve what you want, by showing the camera model (or a selection of other metadata) in the overlay on the image.
Menu>View>Loupe Info > Show Info Overlay to enable this.
Menu>View>View Options to set which metadata to show (camera model is towards the bottom of the list).
Hope this helps?

Development mode problem

Hi,
We are using weblogic 6.1 SP3 and are having a problem when redeploying applications
in development mode.
We register a number of custom MBeans using a managemen.war which has a "<load-on-startup>"
line in its web.xml descriptor. We do this so that the MBeans get created and
registered a deployment time.
The war is normally packaged within an ear and when I copy a new ear into the
'applications' directory I get a series of class not found exceptions relating
to classes used by the mbeans.
What I am assuming is that when an ear is updated, the weblogic server attempts
to re-initialize its list of mbeans ?
Anyone know what happens internally when an application is re-deployed ?
We get the same problem when redploying any ear in the applications directory
and I have also got the problem if I extract the management.war and deploy it
separately ( i.e. not within our ear )
Any help would be appreciated.
Thanks,
Paul.

Where does the Schema class live?
I am ataching 1 example, one in an ear, the other is the same webapp just
standalone. The use custom JMX and register the mbeans, note that the
classes for the mbeans are down in the WEB-INF/classes.
I am not sure if these ear and web apps will work on 6.1, but these both
deploy fine on 8.1
The only thing you might have to tweak is deployment descriptor dtd.s
Cheers
mbg
"Paul" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Thanks for the reply,
Our ear contain 2 ejb.jars and 3 wars, the war we use to register ourcustom mbeans
can be deployed separately (i.e. not within the ear) so it does not have aclasspath
line in its manifest file.
We use the following line to get a reference to the mbean server
mbeanServer = (MBeanServer) new InitialContext().lookup(weblogic.management.RemoteMBeanServer.JNDI_NAME);
>
we then register mbeans using code similar to this
mbeanServer.registerMBean(mbean, mbeanName);
I have attached a sample of the exception, the exception repeats for allof our
custom mbeans, the listing shows the server getting a class excecption forone
of our custom mbeans called "Schema"
Thanks,
Paul.
"Mark Griffith" <[email protected]> wrote:
What is the topology of your ear. ie. where does stuff live and manifest
classpath.
How are you "regestering" mbeans.
What is the exception and the full stack?
mbg
"Paul Ryan" <[email protected]> wrote:
Hi,
We are using weblogic 6.1 SP3 and are having a problem when redeploying
applications
in development mode.
We register a number of custom MBeans using a managemen.war which has
a "<load-on-startup>"
line in its web.xml descriptor. We do this so that the MBeans get
created
and
registered a deployment time.
The war is normally packaged within an ear and when I copy a new ear
into the
'applications' directory I get a series of class not found exceptions
relating
to classes used by the mbeans.
What I am assuming is that when an ear is updated, the weblogic server
attempts
to re-initialize its list of mbeans ?
Anyone know what happens internally when an application is re-deployed
We get the same problem when redploying any ear in the applicationsdirectory
and I have also got the problem if I extract the management.war anddeploy
it
separately ( i.e. not within our ear )
Any help would be appreciated.
Thanks,
Paul.
[jmxEar.ear]
[jmxWebApp.war]

Develop Mod. to Print Mod. ?

Running LR5.7.1. on MacPro - no other programs. The Photo image in Develop Mod does not transfer to Print Mod for printing - only the FIRST image in any selected Folder does. Happens with all Folders. Tried earlier LR Cat. same problem. Re-installed LR5 - still same issue. This was not happening prior to client photo shoot to Cuba last week, only this past week upon return and adding Cuba photos to LR. Even selecting the photo to print - LR prints the FIRST photo of the Folder - not the selected image.
Need to output client photos, any thoughts would be appreciated.
thanks

At the top of this forum, see the notice "Read this before posting about LR 4!!!"

N9 PR1.2: Unable to turn on "Developer mode"

I tried to turn it on, "Developer mode" but failed. There are two type of phenomenon.
a) Keep spinning circle with "Preparing for installation" but never completed.
b) Unable to Start Operation, Refreshing Cache.
For solving b), I understand that removing /etc/apt/sources.list.d/filemanager.list is solution.
But I cannot remove this without enabling developer mode.
I tried to remove this file from File box application but failed with error.
Does anyone have another solution for turing on "Developer mode" with this situation?
I need your help.
Solved!
Go to Solution.

i had the same issue on one of my devices. it is easier to just reflash the rootfs on the device.
that will rewrite all the OS files, but leave your personal data on the emmc (MyDocs).
you would have to reinstall your applications, but it should fix it.
note: the unit i had the issue on was an ota update, not the one i flashed directly. so in the end, i ended up flashing both!

Automatic clean of Recent Folders list in Finder's "Go" menu: how I did it

Hi everybody. I just would like to share with you the trick I have found to automatically clean the "Recent Folders" list in Finder's "Go" menu.
It costed me some work but eventually it worked.
I wanted it to run at shutdown. If it were executed at startup it would need an extra command (killall Finder) to work properly.
This is how I got it:
Open the terminal and do the followings:
cd /etc/
sudo nano rc.shutdown.local
insert your sudo password
into the nano editor write the following lines:
#!/bin/bash
cd /Users/YourUserName/Library/Preferences/
defaults delete /Users/YourUserName/Library/Preferences/com.apple.finder FXRecentFolders
chown YourUserName:YourGroup com.apple.finder.plist
Close (ctrl+x) and save (y and return)
And now some explanations.
the first instruction (#!/bin/bash) is just needed if you have an empty or not-existing rc.shutdown.localfile otherwise it should be just there.
YourUserName is obviously the name of your user whose Finder's preference file you want to edit.
YourGroup is the group your user belongs to. Usually it is 'staff'.
the chown is needed because all this commands are executed by the script as root. So the "defaults delete" command changes the ownership of the com.apple.finder.plist to root:wheel, resulting in the loss of your Finder's preferences at reboot.
For the same reason the "defaults" command specify the exact path to the domain to be edited (without the .plist part as usual).
The rc.shutdown.local does not need to be set as executable. It works as it is created by nano but please remember to reboot twice after any change in order to see the effects.
I hope it could be clear enough and somehow useful.
Please feel free to add comment, questions or improvement suggestion.
Thanks
Bye

Alright I have windows 7 and I tried downloading the new iPhone software at least 8 times now and each time the download completes, but then promps me that the connection has timed out. I am certain that it is not my internet connection because I have used several different networks. I was wondering if anyone had any idea how to change my internet options if that is the problem. I turned off all of my firewalls since I could not find a way to allow itunes to pass through the firewall even though it seems to be allowed. Thanks to anyone that can help.

Corruption in LR Develop mode

Greetings,
I'm on a Mac Power PC running OS 10.5.5 with 6.5 GB RAM on LR 2.1. I am shooting with a Canon 1ds III on SanDisk Extreme IV 4.0 GB cards.
Sometimes I get a rainbow-colored corruption on part or most of an image while working with an image in the develop mode. I recently upgraded to LR 2.0 and was hoping that it would clear up what was happing in LR 1.0 but it has not.
The only good news is that when I restart the computer and then relaunch LR, the corruption disappears before my eyes. In other words, when the image is "loading" in LR's develop mode, the same corruption is there momentarily but then vanishes once the image has fully "loaded."
Any thoughts?
Let me know if I can provide more information as I'm sure I have not provided enough. I have a screen capture I can email (or post if I knew how).
Thanks,
Scott

Hey Martin,
I can't get your first link to work but what I get is a square or rectangular-rainbow-digital gobbeldigook usually starting from the lower right corner of the image covering anywhere from 5% to 90% of the image.
At the moment, I'm exploring the possibility that mine is RAM-related. I'm able to recover the flawed images after a restart. This points me to a problem with my Mac or the LR software. I could be wrong so take this with a grain of salt.
Anyway, I purchased online (for a buck and change) "Memtest OS X". It checks your RAM for errors/flaws. After running the program, it turns out I have a bad RAM chip in my desktop machine and so I have of course removed it. So far, with working all day today on post, I have had no problems (knock wood). This is by no means final in my mind however and I'm going to continue to cross my fingers and hold my breath for a little while every time I open an image in the develop mode of LR.
I hope this might lead you somewhere as well. I'll report back later after I've had some time to test the waters.
Any luck on your end?
Scott

Folders List In Develop Mode

Similar Messages

Maybe you are looking for