Folders moves up and down when selected

Hi! I always used Mac Computers at work with no problems. I bought an iMac and when I open a folder and select a sub-folder or other documents (as jpg or doc) - without open them, just a selection - they have little movements up and down, right and left... I suppose it could be an arrangement of the font, anybody have this problem too? Some tips to fix it?
Thanks

Apologies for the delay. Did restart in safe and still doing it. Each click of the mouse wheel sends it about five lines worth of text. Doesn't matter which way you roll the wheel either. It goes into the opposite direction each click. I'm thinking it has something to do with the config stuff but I'm lost in there.

Similar Messages

  • No Sound from Mac Pro, however, volume icon moves up and down

    Hello, I was using my 12 month old Mac Pro last night and it worked fine with sound as normal. When I powered it up today there is no sound coming from my monitor, but the volume icon moves up and down when I press the keys? I've checked in the Preference sound file and everything is set ok? I googled this problem and some people have suggested that there should not be a 'red' light showing in the digital connection on the back? However, I can see a red light, I've tried using my headphones in the front mini-jack and nothing? I disconnected the monitor audio cables restarted the Mac, there was then sound as normal if I used the sound keys. I re-connected the audio cable and it continued to play sound for 5 minutes or so, then stopped working again?

    I have a problem with my Powerbook automatically muting. If you read the posts, there seem to be a lot of people having this problem and no one can explain or help.

  • In Lion, why did Apple remove the up/down arrows in the scroll bars?  There is currently no way to move up and down in small increments.  WHY????

    Every mac operating system software until Lion had the ability to use up/down arrows in the scroll bar.  This makes it easy to move up and down in small increments.  In Lion, it is impossible to move up and down in small increments.  Click on the scroll bar and it moves up or down an entire page.  When you try to put the curser on the scrollbar and move it up just a little, it moves a whole bunch.  With the up/down arrows, you can click on the arrow and it will scroll ulp or down one line a time.  There is no way to do this in Lion. Why would apple remove the very useful feature of up and down arrows.

    Yes, agreed a missing element.
    Did you try using the up / down arrows on the key board.

  • The trackball on my Lenovo laptop does not work to move up and down pages on the Firefox Beta. Can I enable this

    The problem started when I downloaded the Firefox Beta version 4. I have just upgraded to version 5 and I am still having the problem. I have a center button on mouse pad that allows me to move up and down pages without clicking on the sidebar,

    Try this: <br />
    Type '''about:config''' in the URL bar and hit Enter. <br />
    ''If you see the warning, you can confirm that you want to access that page.''
    '''''Filter''''' = '''trackpoint'''<br />
    '''''Pref''''' = '''ui.trackpoint_hack.enabled''' <br />change that from -1 to 1. <br />Restart Firefox.

  • Is there a way to make the scroll wheel move up and down instantly like you could with previous versions, instead of moving slowly up and down?

    I've only recently updated my firefox to v 15.0.1 after using v 10 for so long, and I was wondering if there is a way to make the scroll wheel move up and down instantly without having it slowly crawl to it's spot?

    you can disable smooth scrolling.
    *Tools > Options > Advanced > General: Browsing: "Use smooth scrolling"

  • How do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    I'm partial to this series:
    After Effects basics tutorials by Andrew Devis
    The subject matter is very clearly-defined by topic.
    And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version.  Please share.

  • Acrobat shuts down when selecting scanner

    Acrobat shuts down when selecting Twain 1027 scanner? 

    Thanks for getting back to me.
    Don't have another scanner but everything works fine with Cute PDF.
    this is the error message.
    thanks
    Nick

  • I can not see my whole sreen , i have to move up and down and side to side to see all icon, how to adjust back to see whole sreen

    i can not see my whole sreen , i have to move up and down and side to side to see all icon, how to adjust back to see whole sreen

    In addition to holding the Control key and scrolling down.
    You can also zoom the display back out by holding the Command Alt keys and hitting the - key, which is a Universal Access Seeing Preference.

  • Almost every time I open Firefox some bookmarks move up, and down the sidebar. Anyone know how I can fix this frustrating problem?

    I have many bookmarks in folders. The folders, and some plain book marks move up or down from where I place them every time I open I open Firefox 4.0. I have even put them back to where I want them to be, and next time I open Firefox they move like they are playing Hide & Seek! Also from time to time there are new bookmarks added named "about:blank: I deleted the 8 ones created last week a few days ago, and now have 6 more! I am also having problems deleting some plugins, but that is another issue to worry about later.

    Any chance you are using the Sync service?

  • Why does the Page moves up and down slightly while loading?

    The page jumps (jerky) up and down while loading. The movement isn't great but is more than enough to lose your place while trying to read the part already loaded.'''bold text'''

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    You can also try to create a new profile.
    * [[Use the Profile Manager to create and remove Firefox profiles]]
    * '''[[Firefox no longer works with Windows 2000]]'''

  • Why does the text jump up and down when I'm trying to read or click on something? It's damned annoying. How can I stop it

    Home page or email page, the page jumps up and down at random and when I try to click on something I often miss and end up clicking something I don't want. It gets real annoying and I can't find where to stop it. Why did someone think to do this in the first place. I've learned new profanity because of it.
    G runyan

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    You can also try to create a new profile.
    * [[Use the Profile Manager to create and remove Firefox profiles]]
    * '''[[Firefox no longer works with Windows 2000]]'''

  • My scrollbar on the right side turned black, with the update, and I can no longer see the position marker to grab it and move up and down

    This didn't happen until Firefox 11.0. The scroll bar is there, with the up and down arrows, but everything in-between is black, and you can no longer see the mini-bar within to move the page.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Hard drive constantly spinning up and down when asleep

    Hi all,
    I have a problem with an external USB 2.0 hard drive connected to my Mac mini (late 2012).
    When I put the computer to sleep the drive spins up to speed, stops, then immediately starts to spin up again. This goes on and on.
    I understand that drives will periodically spin up when asleep for spotlight indexing etc. However this seems like strange behaviour, it just repeats spinning up and down in an endless cycle.
    I have had the drive for a while now, as my time machine backup. Interestingly this problem only started after I rearranged my desk when I set up a second monitor. I have a USB 3.0 drive (my scratch disk) that behaves normally.
    I have drives set to not sleep in preferences.
    I have searched around but can only find posts about people not wanting to wait for drives to spin up when they open finder etc.
    What do you think? Could the drive be on its way out? It is a Samsung spinpoint f3 1tb in an Iomega enclosure, for information...
    I appreciate any help,
    Cheers,
    Mike

    Hi BDAqua,
    I should have noticed this earlier but it appears the problem is with the mini waking from sleep and thus causing the drives to wake.
    When I put the mini top sleep (without the external drives powered on) it constantly wakes and sleeps. The displays dont come back on (untiul you click the mouse or hit a key etc.) but you can hear the internal drive spin up and the sleep light comes on, then goes back to blinking until it wakes again.
    I have realised that it must be due to the second monitor that I have connected via the mini display port. It is connected using a mini display port to hdmi cable I bought from play.com. Something to do with the  display and thunderbolt is casuing the sleep function to misbehave, I think.
    Here is the console log that was created after sleeping the mini, allowing it to go through its weird sleep/wake cycle then fully waking it up again.
    Hope that makes sense, it is late and I am tired!
    Thanks for all your help.
    Mike
    21/05/2013 23:30:16.840 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    21/05/2013 23:30:16.000 kernel[0]: HID tickle 43809 ms
    21/05/2013 23:30:18.747 WindowServer[93]: Created shield window 0xc1 for display 0x003f003f
    21/05/2013 23:30:18.747 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:18.752 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:18.766 WindowServer[93]: Created shield window 0xc2 for display 0x003f003d
    21/05/2013 23:30:18.766 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:18.784 airportd[1018]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:30:19.169 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:30:19.206 loginwindow[42]: resume called when there was already a timer
    21/05/2013 23:30:19.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:30:58.348 com.apple.backupd-helper[1028]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.
    21/05/2013 23:31:02.141 WindowServer[93]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
    21/05/2013 23:31:02.142 loginwindow[42]: CGSGetWindowTags: Invalid window 0xffffffff
    21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
    21/05/2013 23:31:02.142 loginwindow[42]: CGSSetWindowTags: Invalid window 0xffffffff
    21/05/2013 23:31:02.307 WindowServer[93]: Created shield window 0xc8 for display 0x78c8d2fe
    21/05/2013 23:31:02.311 WindowServer[93]: Created shield window 0xc9 for display 0x78c8d1b0
    21/05/2013 23:31:02.311 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
    21/05/2013 23:31:02.352 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:02.352 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:02.370 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
    21/05/2013 23:31:02.389 WindowServer[93]: device_generate_lock_screen_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
    21/05/2013 23:31:02.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    21/05/2013 23:31:04.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:04.000 kernel[0]: LE is supported - Disable LE meta event
    21/05/2013 23:31:04.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    21/05/2013 23:31:04.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    21/05/2013 23:31:04.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:04.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
    21/05/2013 23:31:04.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    21/05/2013 23:31:10.000 kernel[0]: TBT W (2): 0x0010 [√]
    21/05/2013 23:31:10.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
    21/05/2013 23:31:10.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    21/05/2013 23:31:10.000 kernel[0]: Previous Sleep Cause: 5
    21/05/2013 23:31:10.000 kernel[0]: en1: 802.11d country code set to 'X3'.
    21/05/2013 23:31:10.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:10.965 configd[18]: network changed: v4(en0-:192.168.1.190, en1-:192.168.1.47) DNS- Proxy- SMB
    21/05/2013 23:31:11.549 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:11.632 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:11.000 kernel[0]: en1: 802.11d country code set to 'US'.
    21/05/2013 23:31:11.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    21/05/2013 23:31:11.000 kernel[0]: MacAuthEvent en1   Auth result for: 10:bf:48:3e:02:74  MAC AUTH succeeded
    21/05/2013 23:31:11.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    21/05/2013 23:31:11.000 kernel[0]: AirPort: Link Up on en1
    21/05/2013 23:31:11.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:11.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:12.000 kernel[0]: en1: 802.11d country code set to 'GB'.
    21/05/2013 23:31:12.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    21/05/2013 23:31:12.000 kernel[0]: Graphics suppressed 2116 ms
    21/05/2013 23:31:12.000 kernel[0]: AirPort: RSN handshake complete on en1
    21/05/2013 23:31:12.454 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
    21/05/2013 23:31:12.466 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
    21/05/2013 23:31:12.470 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
    21/05/2013 23:31:12.895 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:12.915 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:13.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
    21/05/2013 23:31:14.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,c5e1,3800]
    21/05/2013 23:31:14.757 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
    21/05/2013 23:31:14.776 mDNSResponder[39]:  78: Could not write data to clientPID[-1]()  because of error - aborting connection
    21/05/2013 23:31:14.779 mDNSResponder[39]:  78: DNSServiceGetAddrInfo      v4v6 39-courier.push.apple.com. PID[-1]()
    21/05/2013 23:31:15.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:16.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:17.426 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:17.426 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
    21/05/2013 23:31:17.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    21/05/2013 23:31:17.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:17.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    21/05/2013 23:31:17.000 kernel[0]: LE is supported - Disable LE meta event
    21/05/2013 23:31:17.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    21/05/2013 23:31:17.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:17.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
    21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    21/05/2013 23:31:24.000 kernel[0]: TBT W (2): 0x0010 [√]
    21/05/2013 23:31:24.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
    21/05/2013 23:31:24.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    21/05/2013 23:31:24.000 kernel[0]: Previous Sleep Cause: 5
    21/05/2013 23:31:24.006 configd[18]: network changed: v4(en0:192.168.1.190, en1-:192.168.1.47) DNS* Proxy SMB
    21/05/2013 23:31:24.010 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.47)
    21/05/2013 23:31:24.973 configd[18]: network changed: v4(en0-:192.168.1.190) DNS- Proxy- SMB
    21/05/2013 23:31:24.978 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en0 (192.168.1.190)
    21/05/2013 23:31:25.269 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:25.277 hidd[46]: MultitouchHID: device bootloaded
    21/05/2013 23:31:26.000 kernel[0]: MacAuthEvent en1   Auth result for: 10:bf:48:3e:02:74  MAC AUTH succeeded
    21/05/2013 23:31:26.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    21/05/2013 23:31:26.000 kernel[0]: AirPort: Link Up on en1
    21/05/2013 23:31:26.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:26.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    21/05/2013 23:31:26.000 kernel[0]: Graphics suppressed 2278 ms
    21/05/2013 23:31:26.000 kernel[0]: AirPort: RSN handshake complete on en1
    21/05/2013 23:31:26.580 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
    21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:22C9:D0FF:FE8F:B1EB)
    21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (192.168.1.47)
    21/05/2013 23:31:26.590 configd[18]: setting hostname to "mikemini"
    21/05/2013 23:31:26.592 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
    21/05/2013 23:31:26.596 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
    21/05/2013 23:31:27.016 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:27.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
    21/05/2013 23:31:28.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,c5e1,3800]
    21/05/2013 23:31:28.797 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
    21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:AA20:66FF:FE11:3086)
    21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.190)
    21/05/2013 23:31:28.816 mDNSResponder[39]:  78: Could not write data to clientPID[-1]()  because of error - aborting connection
    21/05/2013 23:31:28.819 mDNSResponder[39]:  78: DNSServiceGetAddrInfo      v4v6 13-courier.push.apple.com. PID[-1]()
    21/05/2013 23:31:28.835 configd[18]: setting hostname to "MikeMini.local"
    21/05/2013 23:31:30.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    21/05/2013 23:31:31.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
    21/05/2013 23:31:33.745 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    21/05/2013 23:31:33.000 kernel[0]: HID tickle 9738 ms
    21/05/2013 23:31:35.674 WindowServer[93]: Created shield window 0xca for display 0x003f003f
    21/05/2013 23:31:35.674 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:35.679 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:35.700 WindowServer[93]: Created shield window 0xcb for display 0x003f003d
    21/05/2013 23:31:35.701 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:35.712 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
    21/05/2013 23:31:36.104 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:36.129 loginwindow[42]: resume called when there was already a timer
    21/05/2013 23:31:36.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
    21/05/2013 23:31:36.896 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
    21/05/2013 23:31:36.897 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
    21/05/2013 23:31:37.669 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
    21/05/2013 23:31:37.683 WindowServer[93]: Created shield window 0xcc for display 0x78c8d1b0
    21/05/2013 23:31:37.683 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x3f003d
    21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x78c8d2fe
    21/05/2013 23:31:39.009 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
    21/05/2013 23:31:39.026 WindowServer[93]: Created shield window 0xcd for display 0x78c8d1b0
    21/05/2013 23:31:39.026 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003d
    21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003e
    21/05/2013 23:31:39.051 WindowServer[93]: Created shield window 0xce for display 0x78c8d2fe
    21/05/2013 23:31:39.051 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
    21/05/2013 23:31:39.490 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
    Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
    UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.490 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.490 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    21/05/2013 23:31:39.491 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    21/05/2013 23:31:39.491 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
    Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
    UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.491 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.685 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:39.713 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.714 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:39.805 WindowServer[93]: Created shield window 0xcf for display 0x78c8d1b0
    21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd0 for display 0x003f003d
    21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd1 for display 0x003f003f
    21/05/2013 23:31:39.811 WindowServer[93]: Created shield window 0xd2 for display 0x78c8d2fe
    21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
    21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
    21/05/2013 23:31:39.842 WindowServer[93]: Display added
    21/05/2013 23:31:39.842 WindowServer[93]: Display removed
    21/05/2013 23:31:39.875 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
    Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
    UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.876 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
    Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
    UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
    21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
    texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    21/05/2013 23:31:39.883 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d2fe device: 0x10646ea10  isBackBuffered: 1 numComp: 3 numDisp: 3
    21/05/2013 23:31:39.892 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d1b0 device: 0x10646e110  isBackBuffered: 1 numComp: 3 numDisp: 3
    21/05/2013 23:31:41.029 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.062 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.088 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.089 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.103 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.104 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.843 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.846 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
    21/05/2013 23:32:20.130 com.apple.backupd-helper[1043]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.

  • Screen problem z2, screen going up and down when "pushed" in

    Hello, so basicly my problem is like this.
    When i press a finger towards the screen and try to say browse down or up slow, the screen can flicker and go up and down or "wabbling". Its possible tho to just swipe up and down without having the finger pressed, but thats harder to deal with. Since it can be to big jumps when reading stuff.
    This however doesnt always happen, so sometimes it works just fine. But more or less its causing problems often, and very frustrating to browse/surf.

    Hi, try running your phone for a while in Safe Mode......possible cause could be some 3rd part app affecting your phone, you could try narrowing it down by thinking of fairly recent apps you've installed.....as i said, run it for a while and see if your phone works fine 
    Then it will be a matter of deleting or force stopping each individual app one at a time and testing after each time 

  • Playbook screens swiping up and down when using charger

    Hi,
    I am facing an issue with the playbook screens going up and down and opening up icons randomly when I connect the PB to the charger.
    The random behaviour stops once I remove the charger but again continues if I connect the charger.
    Let me know the future course of action.
    Regards
    Suryadeep

    Does this still happen after the 3 button reset?
    If so, you may have a faulty unit. If you're eligible, try contacting BlackBerry with your free 90 day support. 

Maybe you are looking for

  • Bridge is opening all of my RAW files as jpegs when I import them from iPhoto

    I have set my iPhoto preferences to send my RAW photos as RAW when using an external editor. If I only use ACR, this works fine, but if I want to use CS4 they are all coming over as jpegs and I then have to work w them as jpegs. I have PSE 8 . Do I h

  • Poor dvd burn quality

    gorgeous full hd clip burn into dvd using imovie (imported full quality size) and idvd setting as a professional quality.. but dvd came out so terrible worst than normal dvd.. anyone has idea what software i should use to have best quality dvd.. maxi

  • DB Startup Problem !! - Urgent

    Hi, While DATABASE OPEN after incomplete recovery ... I got the following issue. SQL> alter database open; alter database open ERROR at line 1: ORA-01092: ORACLE instance terminated. Disconnection forced And then I found out the following from dump f

  • IPod won't recognize power sources of any type

    No matter what I hook my iPod up to, it cannot get power. I've tried power adapters that plug into the wall, connecting to 3 different PCs via USB port, and my car's iPod connector. In all cases there is no power going to the iPod. The PCs say the US

  • Moving Project from External

    I am editing a long project. All my video is on an external LaCie drive. I don't like the sound of the drive. I've had it for two years and it's getting loud and the noise will sometimes go on for hours. Is there a way to transfer all the material fr