Folders Show up in Catalog, but unable to view photos in folders after a certain folder

System: Windows 7, 32Bit, Core2Duo w/ 2GB Ram, LightRoom 5.5 hooked up to a Nikon D5200 for Tethered capture & review only. Currently we have 1727 folders and 5530 pictures in the Catalog.
We use this system to take product images for a website and the images are stored on a mapped drive file server. Today when trying to review some of the more recent pictures it would not select the folder/open the photos (but you could see the first picture in the folder in the preview window). I was running LR 5.3 so I upgraded to 5.5 to see if that would fix the problem but it did not. I am able to see the pictures if I click on the root folder and it works as expected.
Older folders/pictures work they way they should, but everything taken after Monday did not work. (Monday happens to also be the last day a backup of the catalog was done). When I revert to Monday's backup all of the folders/images work. When I try to import the missing folders/pictures into the Monday backup , I have the same issue at the same point. I have tried creating a new catalog from scratch and have the same problem, however the "break-point" (where I can no longer see inside the folders) changed to a slightly earlier [in the series] folder.
I can browse the mapped network drive and see all of the folders/pictures without problem. I have also tried Synchronizing the folders and optimizing the catalog but neither had any effect.
Have I hit some sort of folder limit? I read there was no "hard" limit file/folder limit per catalog, but with the way it is acting, it is almost like I found a hidden folder limit.

I can see all of the folders in the folder list, just can not click on the last 30-40 so maybe 1700 is limit
The folders are setup as: (each folder has 1-4 pictures inside)
p:/parts_pictures
p:/parts_pictures/part1/
p:/parts_pictures/part2/
p:/parts_pictures/part1727/
In LightRoom it shows up as
->p:/parts_pictures
     - part1
     - part2
     - part3
     - part1727
(note: I am using the part1, part2, part3 as an example.. the actual folder names are our internal 6 digit ID)

Similar Messages

Photos showing in camera roll but unable to view ;(

Hey guys and girlys,
i really hope you might be able to help me out with this,
as above ive got a bunch of photos in my camer roll,
but when i click on one of them i get a black screen with a white dot in the middle??
all 263 photos are doing the same, i tried to whatsapp one of them but its still not sending the photo as if its not there,
also tried to open one in windows and it wont open in there?
gutted as ve got some of my childrens crimbo pictures that i didnt really want to loose.
any ideas please?

Do you have restrictions set on your phone? If not, set a restriction and turn off the camera. When you turn the restrictions off it should reset your camera without removing the pictures. I have tried this before but you may want to sync it first!

TS1717 I have downloaded a program but unable to view, message -50, I'm asked to verify my connection

I have downloaded a program but unable to view, message -50, I'm asked to verify my connection. The program started and then there was just audio, and then stopped completely

I have contacted the library staff and they said that I could go back and download again, this time into ITunes. However when I try, it says that since I've already downloaded it once, it will go into the same file this time (again onto my hard drive).

Unable to view photos received via e-mail or texting

Hi,
I have been unable to view photos that I received via a text message. I do receive the yellow bubble alert telling me to download. After I hit the download button, it just hangs. I also attempted to send myself a photo from my work email address by mailing to [email protected] Again, I received the notification to download the photo and after hitting the download button--nothing! Am I doing something incorrectly? A setting to be made perhaps? FYI, I am running the latest update for the Charge.
Thx for the help!

mikemoor wrote:
Well since nobody here responded, I called Verizon Tech Support directly. I was instructed to remove the battery while leaving the power on (that's important--do NOT power off!). Then depress the power button in succession twenty (20) times. Replace the battery cover and power up as normal. All fixed!!! Thanks to "Julius" at VZW. Obviously, this is some type of reset sequence for the Charge.
Depress the power button 20 times with the battery still out or after putting the battery back in?

BAPI BAPI_ACC_PRIMARY_COSTS_POST posting docs succfully but unable to view?

HI EXPERTS,
I am using a BPI to do actual postings in KB through BPI "BPI_ACC_PRIMARY_COSTS_POST"...document is posted and number is generated as output and a sucess message is returned by BPI.
But i am unable to view the document.
can anybody tell what might be the problem when we do postings using BPI.

You may have to commit after calling the BAPI to reflect the changes made
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.

I have Netflix and amazon video accounts but unable to view, due to a http configuration

Just purchased and downloaded Netflix and amazon instant video but unable to watch due to an http configuration. What do I do?

Amazon video and netflix apps are free.
They are region restricted.
If you do not live in a supported region you can not use the service.
What http configuration problem are you having?
Are you trying to violate terms of service by using a proxy?

Unable to view photos although after sycronising after upgrade to IOS 5.1.

Hi, I'm unable to view the photos after syncronising although application shows that I've successfully syncronise 9 photos. None can be displayed.This is after upgraded to IOS 5.1.Pls help.

Completely agree with you, bladddddd.
There really should be a toggle in the cellular menu to switch between LTE, 3G & 2G. Carriers in some parts of the world may well be switching off the 2G service, but that doesn't apply to everyone & certainly not where I am in the UK.
I spoke to AppleCare about my problem last month, but they were unfortunately quite hopeless, not knowing that the easiest way for me to recover my original carrier settings in iOS 6.0.2, would have been for me to carry out a full reset & restore from a backup. :(
I did too pass on my annoyance with the inability to switch back to 2G, should I want to, after an over-the-air carrier settings update has taken place & has subsequently replaced the 3G toggle with the LTE toggle.
I have also completed the feedback form some weeks ago. I hope others having this same issue will do this too:
http://www.apple.com/feedback/iphone.html
Hopefully, Apple may bother to actually take some notice of this problem, which will now affect a lot of iPhone 5 users.
The next iOS update will hopefully include the ability to override a carrier settings update & falling back to a 2G signal, should users want to, or need to, particularly in order to reduce the strain on the battery.
Until such an update is released, I'm sticking to iOS 6.0.2 :(

Unable to view photos on iPhone 4S

Hi,
There are some photos which I am unable to view on iPhone 4S 64 GB. When I open those photos it opens up with a white screen but I am able to view those in the camera roll. It only happens when I open the picture to view it in the normal size. This photos are taken from the same device. I've performed Reset, refresh but its still the same.
Regards,
Amit P

Hello Bruce,
Thank you for contacting Apple Support Communities. Since you didn't specify if your issues concerned Wi-Fi or cellular networks, I am providing links to articles on troubleshooting each.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Regards,
Jeff D.

TS4403 unable to view photo stream in windows

I am unable to view my photostream on my pc. I keep getting an error that iphotostream stopped working do I wish to debug or cancel I'm not sure how to fix this. It also says that photostream is not enabled in the windows folder, but it has been enabled in the icloud control panel. Thanks.

You first need to go into the System/iCloud preference pane and activate PhotoStream:
Then you'll be able to activate it in iPhoto.
OT

Ipod classic not allowing access to to music or pod casts - shows zero files in music and pod cast but used space shows 3/4 full it is recognized by itunes sometimes on my pc but unable to view content

ipod classic shows disk 3/4 full but when i look in the folders it shows zero for music and zero for podscasts. i can not access these folders on the ipod or when it does connect to my windows computer thru itunes. it does not connect 90% of the time now. i let it check the disk when it was connected to my pc which did not good - any other ideas? other than restore?

Your iPod filesystem is corrupted, so your music and podcastr is in the Others, this is most likely caused by a slow USB connection, which timeout during sync.
Try the Hard Reset first
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Then do the iPod Disk Diagnostic, in this earlier post by tt2, it wont fix your problem, but help you decide if your iPod is dying and causing the timeouts.
Have a nice day!

Junk folder shows 1 message but unable to view or delete it.

I'm using Apple Mail, OS 10.4.3. My Junk Mail folder shows one message, but when I click on the folder, it reports zero messages and nothing is visable. When I erase the messages in my Junk Mail folder, the folder still indicates one message.
I tried resetting my preferences, but the problem persists.
Anyone have any ideas?
Thank you.

Hello Michael.
If for a POP type account, using the Finder go to Home > Library > Mail > this account named folder (named by the user name and incoming mail server for the account).
Within a POP type account named folder should be mailbox folders with an .mbox extension.
Confirm there is a Junk.mbox named folder and not a Junk named folder.
If shown as a Junk named folder, quit Mail first and change the name of the Junk folder to Junk.mbox or add the .mbox extension.
Launch Mail and this should resolve the problem.

USB hard drive shows up in finder, but unable to connect and access content

I have a hard drive connected to the USB port on my Airport extreme. It shows up under "shared" in finder but when I try to access the content the connection fails. All my software and firmware is up to date. Any suggestions?

I've had (and I'm still having) a lot of AirPort Extreme Base Station + USB drive problems.
Here are some random actions that help when I lose connectivity (in the same way you describe):
Rebooting the AEBS (by unplugging power cord)
De-activating then re-activating AirPort on the mac
Unplugging then re-plugging the drive power cord
Plugging the USB drive directly on the Mac and running Disk utility repair
The first is usually enough, and maybe some of these steps are totally useless, but I swear AirPort Disks have been driving me crazy, especially since Tiger and even more since the latest updates.

I am having difficulty downloading photos from camera....iPhoto seems to be doing nothing, shows pictures on screen, but unable to proceed from there.

I am having trouble downloading photos to iPhoto from camera. iPhoto recognizes pictures, but does not offer the option to download/import.

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

Flash 9 installed, but unable to view on pages

I've been helping my uncle with some recent software updates.
Recently, he renewed his Norton Internet Security subscription (for
2 years) and got a free copy of Systemworks out of the deal. Around
the same time, MSN just updated his browser and connection software
(he's on MSN dial-up).
Ever since, his Flash hasn't been working. He had 7, so he
thought he needed to update. Going to the Flash 9 install page
failed to work. Through the MSN browser, no ActiveX control
security dialog happened. I did a clean uninstall of Flash and was
able to get that security dialog. That didn't help, since no
download box came up.
So, I came home. On my computer I downloaded an
install_flash_9 msi package, burned that to a CD and installed it
on his computer. When we go to a site that has flash, it still just
shows a box with an X. I can right click on that and get the
"about" "settings" and "About Flash 9" options, but nothing there
helps.
I searched all over MSN's settings, but haven't found
anything that would block flash. I tried temporarily disabling
Norton, but that didn't help either.
His computer is slow because he has a million spyware
blockers and popup blockers, but I did make sure to shut those
down. I also went through plain IE and checked the Norton Settings
there. I made sure to allow all Flash and ActiveX content there.
Still nothing.
Can anyone help? Thanks in advance.
Wackman

MSN uses the MSN Explorer, which I think is IE6 based. He
also has IE6 installed, and that's where I can get to the Norton
Internet Security controls. I have already gone to Internet Options
and enabled all the Active X stuff. That didn't work.
I could try to run getflash again, but I think it's installed
OK. Sites report that flash is installed, but applets aren't coming
through. I *think* MSN has foisted on him an MSN Firewall which he
doesn't need with the Norton stuff.

GPO applied for firefox but unable to view setting in firefox

Hi Team,
I have applied some configuration setting for Firefox via GPO and Firefox admin template 0.9.2. GPO is applied successfully and even i can see the setting in registry as well as in GP. But Firefox is unable to change the same or not able to view these settings in Firefox

Hello,
As per the GPO link, this is a two step process
#You use [http://sourceforge.net/projects/firefoxadm/ FirefoxADM] to build the registry keys that can be deployed using AD and GPO to all the end-user computers
#Use the [https://addons.mozilla.org/en-US/firefox/addon/gpo-for-firefox/ GPO for Firefox] to read these registry keys and convert them into Firefox preferences
So, based on what you are saying, the first is happening - the registry keys are getting updated on the destination computer, but the second is failing. Is that the issue?
Thank you

Folders Show up in Catalog, but unable to view photos in folders after a certain folder

Similar Messages

Maybe you are looking for