Folio 13-2000 unable to create recovery media due to known SSD corruption bug

My folio has been freezing and periodically showing the 'no boot drive' message. I tracked it down to the critical Softpaq sp60976. I tried to create recovery media (USB flash drive), but it fails at about 19% completion and says it cannot continue. The SSD firmware update requires a secure wipe of the drive, but I won't have anything to put back on it.
My computer is out of warranty by a year. Is there really no recovery media, even for purchase, from HP? I'll take DVD, as I can attach an external DVD drive.
This question was solved.
View Solution.

Phone your nearest HP Support to order Recovery Media. Worldwide contact info can be accessed here>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

W540, Windows 8: Unable to create recovery media

Hello,
today I received my new worklaptop, a W540 with Windows 8 installed.
The first think I wanted to do was to create recovery media (I'm going to re-install on a SSD). However, trying to run the Windows 8 "Create recovery media" tool, as sugested by Lenovo, results in the following:
The option "Copy the recovery partition ..." is grayed out, and I can not select it. Pressing Next results in the following:
What am I doing wrong ?
Thank you.
Solved!
Go to Solution.

You should be able to order recovery media from support. They usually charge for the media but in this case they may not. I can't speak for them - you'll have call and see how it goes...
Z.
Finland
THINK-branded products
Finnish
+358-800-1-4260+358-800-1-4260
(Warranty service and support)
8 AM - 5PM
Monday - Friday
IdeaPad and
B, C, E, G, K, N, V, Y Series Notebooks
Finnish
+358-800-9-4439+358-800-9-4439
9AM - 6PM
Monday - Friday
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Re: Unable to create recovery media flash drives

I recently purchased a new Toshiba netboo NB305-N440BL and upgraded to Windows 7 Home Premium. Using the "Create Recovery Media" wizard, as suggested, I attempted to create the recovery media on two flash drives. The flash drives were brand new and had never been formatted.
When inserted the "wizard" program stated that the Flash drives needed to be formatted, but when I asked that they be formatted, the program said that there was an error and they could not be formatted. I then formatted the drives using Windows Explorer Disk Management, reinserted the drives and received the same "...needs to be formatted, but wouldn't format ..."message. I also received "error code 040E2D-00-00000000".
I Googled this error message and found two others who had the same problem with their Toshiba net books when they attempted to create the back up material. There were no responses to their requests for help.Is there another approach to making the back ups?
Thank you

I finally gave up and returned the computer to tech service at Fry's where I bought it.They found that the OS did not recognize the flash drives at any of the USB ports, so they exchanged the computer for a new one ( I was still within the 15 days after purchase for a return) and the new computer works perfectly, Thanks for all the suggestions.

Unable to create recovery media on a new T440

Hello,
I am new here. I have a brand new T440 which I am populating and customising.
I created a new partition on the HDD using MiniTool Partition Wizzard. That may have created the problem - I can't create the recovery media. I get a message that the files are not there. I should have done it before partitioning - too late now.
However, using the Partition Wizzard, I can assign a drive letter to the Recovery partition, and it becomes visible in Windows Explorer (File manager). I can copy the content on an external HD drive.
If I ever need to do recovery - will it work from this? Has anybody tried this before?
Solved!
Go to Solution.

jfranek wrote:
I will try your suggestion and request it from Lenovo Support. Thanks.
Were you able to obtain factory recovery media?
Please let us know how things turned out.
Cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Unable to create recovery media

Starting the Option to Create the recovery media I only get an application crash in "rrmedia.exe". Is there any other way to create the recovery media? Or is it possible to simply reinstall something?

ctron, welcome to the forum,
it would be helpful if you could post which ThinkPad, Operating System and version of R&R you have installed. This will hopefully help members help you.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Re: Unable to Create Recovery Media on Toshiba Satellite C850

Hi tried twice to copy recovery media to 32GB usb flash drive, failed both times.
First time failed on verify, second time failed on recording with error,
04F08-5D-00000000
Any ides appreciated.
Thanks
Ray
Message was edited by: Big-Ray

how many threads do you want to open about one and the same theme?
http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=71732
Follow the first one!

Creating Recovery media disc hang up

While trying to create recovery media disc process is hanging up at the verify disc spot won't go past 24%. I'm using hp DVD+r disc, help.

Hello Lj1983,
Welcome to the HP Forums! I hope you enjoy your experience!
I apologize you are unable to create recovery media, as the process will not complete. I will do what I can to assist you! First, I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Unable to create recovery disk using media creation on hp pavilion g6 2236tx

i am attempting to make recovery disk of my notebook through hp media creation i am using DVD disks for the same but the problem is that when the processing bar reaches almost 99percent it shows error message that unable to create recovery disk try again later!
please help!

Hi saksham_jain,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you tried to create your recovery DVDs using HP Media Creation and it failed. Here is a document to assist you with creating the recovery DVDS. Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7).
If this should fail for any reason, please provide the error and any other details.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

ThinkPad Twist s230u and ThinkPad x201 Tablet Creating Recovery Media

Hi Lenovo Customer Support,
ThinkPad s230u( model number: 3347CTO) - Window 8 Pro.
Before I start using my Laptop, I want to create a Recovery Media as is shown when installed with all partitions. Meaning if I format all contents of Laptop I want a recovery Media brings back computer as I go it in the first place include all partitions. By default there are five hidden partition and one ntfs.
What is the procedure how to Create a Recovery Media? I heard only Flash Recovery exist for Window 8.
Also I have Window 8 Pro but when I tried this link procedure http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Create-Win-8-recovery-media-in-ThinkPad-Thi... I saw only Window 8 option and even then it reboot and did not work.
Also I did Flash Recovery and Took Faster with USB 3.0 Flash around 10 min around 16GB Space
Is it possible to do CD Recovery too ?
ThinkPad x201 Tablet(Model Number: 30933PG) - Wundow 7 Pro
Can you do Flash Recovery Media and CD Recovery Media under Window 7 Pro Enviro.
If you upgrade Hard drive to 1T and RAM to 16 G RAM , Can you Still do the Recovery Media?
What is the Procedure to successfully create Recovery Media.
Thanks.
saad

Reasons am asking this questions:
Sometime you test your computer doing a lot of things learning new technologies etc and suddenly you decide ok I want to take it back to factory state. Until now, most Thinkpad laptop does not come with recovery media. So how can I assure that my Recovery Media includes everything I used to have when I first receive unit.
I want to learn how to do that by myself by learning from the experts.
Until now what I know as follow:
ThinkPad x201:
I tried recovery media 3 DVD only with original hard drive works. I did not try Flash and not sure there is option yet.
If I upgrade unit with 1T hard drive and 16G Ram, How can I do Recovery Media?
ThinkPad Twist s230u:
I tried Flash and followed procedure on link in previous post. I took me less than 15 min to recovery whole. The question is does this process recover all the parts that is included when I receive unit.
I was unable to do recovery since I am not sure when in the Flash and during process showed to choose operating system was only Window 8 option not Window 8 Pro which came with unit.
I was able to do reset within system took longer and worked.
Is the recovery part build-in in the hardware or software partition? Is it included in the recovery Flash with all partitions?
Thank You. Awaiting for anyone to reply.
saad

X220i Can't create recovery media

I have a new X220i with a 128k SSD hard drive. I'm trying to create recovery files on an external hard drive. After clicking "ok" in all the dialog boxes, I get the message "No [sic] enough temporary disk space in the C drive, Create Recovery Media will exit now."
The C drive is 28.4 GB, but only 1.87 GB is free. Windows is taking up most of it. The "Lenovo Recovery" Q drive has 89.5 GB, with 75.8 GB free. MS Office was installed at the factory. I have not installed any other software yet. I can resize the partitions, but I think I need to create the recovery media first?

I'm sorry, carrme, as I haven't explained you clearly. I'm sure the partition sizes of your disk are not from factory. Let's compare with my 320Gb hdd - the partitions were about 1,1 (system_drv) / 310 (c) / 9 Gb (lenovo_recovery).
I think that was not your problem or mistake when you've installed ms and Lenovo updates prior of creating recovery disks.
In your case you can do the folowing:
1. remove (temporarily) some files from drive C:. For example, the folder SWTOOLS. Lenovo sw and drivers for installation are stored here. Also, all installed Lenovo updates are stored in the folder
C:\Program Files (x86)\Lenovo\System Update\session. Then create Factory Recovery disks.
or
2. Resize partitions as you want. Then create factory recovery disks.
In order to save the OTR functionality after partitions resizing just reinstall Lenovo R&R. It'll rebuild MBR.
I think the factory image of your system (I mean the partition sizes) wasn't the same as you have now. But you don't have to worry about this.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Create Recovery Media crashes on Windows 7 SP1 and Rescue and Recovery 4.51.0045.00

I installed Rescue and Recovery 4.51.0045.00 right after a fresh installation of Windows 7 Home Premium SP1 (Build 7601 64 bit) on my Thinkpad Edge 11. After hitting "Advanced Rescue and Recovery" and then "Create Rescue Media" I get a "Create Recover Media has stopped working" error with the problem Signature:
Problem Event Name: APPCRASH
Application Name: RRMedia.exe
Application Version: 4.51.27.0
Application Timestamp: 513d7dbd
Fault Module Name: RRMedia.exe
Fault Module Version: 4.51.27.0
Fault Module Timestamp: 513d7dbd
Exception Code: c0000005
Exception Offset: 00004451
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 3d61
Additional Information 2: 3d617f89c03aec75ed4c33477fb666c5
Additional Information 3: 62ba
Additional Information 4: 62ba33999ddd637bc95b614e6779b3ea
Uninstalling and then reinstalling Rescue and Recovery doesn't work - I still get the same error when trying to create recovery media.
Any tips would be greatly appreciated.

Hi Customer,
We have below workaround for fixing your issue, would you please try and feedback result to me?Thanks.
delete the below registrykey :
"spilock"="1382411866.78"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lenovo\spi\RNR Boot Media]
"spilock"="1382411866.78"

Creating Recovery Media with Portable External Hard Drive

Is it possible to create recovery data with a portable external hard drive?

Hi,
i am also facing the same problem not able to create the recovery media in external hard disk. win 7 64 bit..
Please help there is an option to create recovery media in USB flash drive but its not recognising the usb even though its connected.
Mahesh

Create Recovery Media low disk space on C error

Hey everyone,
When I tried to create a recovery disc on my X301 Windows 7 to free up the partition, I got an error saying "No enough temporary disk space in C drive, Create Recovery Media will exit now." How much space do I need to free up on my C drive? I only have about 7.5 gb free on my 64gb SSD.
Thanks for your help!

You'll want at least 10 GB free before doing anything. As is, you can look at your recovery partition to see exactly how much you'll need, but Windows will always block off extra for some reason.

Cannot Create Recovery Media in Windows 7 Pro for x120e

You can have only one copy of the Microsoft Windows operation system. The Product Recovery Media Creator will exit now.
HI all. First, I have read "Creating Recovery Media in Windows 7" at http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74040.
I get this message when attempting:
You can have only one copy of the Microsoft Windows operation system. The Product Recovery Media Creator will exit now.
What happened is that I blindly copied the recovery files to a USB and just copied to a folder on my desktop XP machine. So now my X120e is saying, sorry, you can't do that again. You already did it blockhead!
So how the heck do I undo this so I can create appropriate recovery media? System restore rollback? Registry key editing? Here are the files on my XP, I have no idea if I create Windows 7 pro recovery files from these.
Thanks all for any suggestions or known fixes,
chadnc
Root folder files & folders:
winRE.wim
usb.tag
Folder\factoryrecovery
Folder\Boot
Inside of Folder\factoryrecovery
sdrivebackup2.wim
cdrivebackup.swm
cdrivebackup2.swm
cdrivebackup3.swm
cdrivebackup4.swm
bcdinfo
RECOVERY
service_done
Inside of Folder\Boot
24 subfolders, starting with cs-CZ
BCD
boot.sdi
memtest
tag

Hi chadnc
Have a look at the first bit of the post by The_Solutor in this thread :Making a usb stick with the Lenovo recovery partition bootable maybe that will help.
Like many things Microsoft, the "you can only burn recovery media once" limitation just inconveniences the honest users, but doesn't slow down the bad guys. Oh well....
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Yoga 13 doesn't have an option to create recovery media in onekey recovery

Hi All,
I am prepping a new Lenovo Yoga 13 for a user. I want to create recovery DVD(s) for the new system with the OneKey Recovery software. When I open the application there is no option to create media. There are only a backup option and a restore option. I called tech support and they advised if I attach a DVD drive the option to create media will appear. I did this but no luck..... I am attaching first a picture of what I see when I open One Key Recovery
And secondly to show that I do have a usb DVD connected here is a picture of the DVD attached with a blank DVD inside it.
I have downloaded the lastest update to the One Key Utility and am running version: 8.0.0.1519. Can anyone give any insight as to why the create recovery media isn't there for me?.....
Solved!
Go to Solution.

I found the answer to my own question. Essentially in version 8 there is no way to create recovery media with this utility. I came across the following link which I am going to try:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024

Folio 13-2000 unable to create recovery media due to known SSD corruption bug

Similar Messages

Maybe you are looking for