Folio Builder does not support proxy authorisation on the mac.
Folio Builder does not support proxy authorisation on the mac.
Which’s solution to connect ?
It does not work because the Folio Builder tries to connect to the proxy as "anonymous". I don't know any solution up to now... Anyone?
Similar Messages
-
Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
MaikeHi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway! -
Lightroom 3 does NOT support raw files for the Canon Sureshot S95
Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.(1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW. Hardly a satisfactory solution.
(I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ).
(2) SUGGESTION- even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting). I am sure users with that preference would still prefer a JPEG than no picture at all!
Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs. So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
JJ
* (this seems to be a setting that needs doing in the various different modes of the camera, by the way). -
I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?
No, you have to sell yours and buy the new iPhone 5 with the proceeds.
Please do not double post. Asking many times does not change the answer.
Message was edited by: ckuan -
Webelements : does not support when i add the data sourcce& view in HTML
hi Masters,
i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
then it works when i view it in HTML VIEWR.
how can i make it to work despite me using the data soruce.
thank you,
pasalahi Pasala,
this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
here's what you can try though:
1) install the latest sap integration kit on your boe system machine(s)
2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
hopefully step 1 & step 2 will solve the issue.
jamie -
My Satellite A100 does not support SDHC cards with the internal card reader
Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
ItockI do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available. -
Uploading content via folio builder does not work
Hi,
Working in inDesign and having a problem with the Folio Builder.
Does anybody know what is going on when I have created a folio, then an article and the folio builder states 'Building Folio...Done' and there is a loading symbol suggesting the article is uploading but it never does. (see attached image). We are not subscribed to either Digital Publishing suite service so we are only allocated one Folio per Adobe ID. Could it be a conflict between a previously installed version (CS 5) of the Folio extentions, which was incorrect as we are working on C5.5 — I subsequently deleted the CS5 folder manually and installed the correct version for CS5.5.
Thanks,
ColmColm before you get help from our pros I will say what happened and worked for me.
I had the same problem and it took two whole days to solve it.
When things stopped working and the process was hanging I would have to kill In-Design. On Windows you go to the task manager and end the program.
This never seemed to cause a problem for In-Design. Right away I would restart the program and start over again and things would finally work.
Go to your Acrobat.com account and see if the file is there. Most often it is. Even though the builder was hung up some how the file ended up on Acrobat.com site.
Click on your cover file in Folio Builder and then try clicking on Preview. If you are able to view your file in Content Viewer on your PC then your problem
may be different than mine. I could not preview my file. Once this preview problem was solved all the other problems went away.
Consider these points as a starting point and then we will give you more ideas.
John -
I cannot get the Folio Builder to appear from the windows menu in InDesign. Folio overlay will appear. I am using digital workspace. The one time it did appear there was no menu, just a blank pane. Tried resetting preferences. I am on CC 9.2.1
After several hours (4+) trying every combination described here and elsewhere, what ultimately worked was uninstalling ALL Adobe software and starting from scratch.
1. Uninstall any and all Adobe software:
Adobe AIR
Adobe Flash
DPS App Builder
Adobe Creative Cloud
Adobe InDesign
Adobe Photoshop
Adobe Illustrator
Previous downloads of installers
Etc.
2. Clear all system and user caches, preferences, bootcaches, kextcache, etc.and reboot (whether necessary or not; just for good measure).
3. Run the Adobe Creative Cloud Cleaner Tool to confirm everything was removed.
4. Reboot (whether necessary or not; just for good measure).
5. Confirm no Adobe affiliated process is running in the Activity Monitor (or Task/Process Viewer in Windows).
6. Download a new clean installer for Adobe Creative Cloud.
7. Cross fingers.
8. Install Adobe InDesign.
9. Reboot (again, just because).
10. Install Adobe InDesign updates (which should download the necessary DPS tools too).
After all this, the Folio Builder finally appeared and began working again for my computer. -
I tried to scan with my old hp photosmart 2600 and it would not work. Prints fine. Called HP and they stated Apple elected not to give us the capability to scan with this unit with the 10.8 version. Yet, when I check on the apple web site, it says I can scan. Anybody know?
I don't have this model so I cannot confirm this, but I have to say that what the HP support told you is a load of rubbish. It is up to HP to make a scanning utility that works on 10.8. So if this model is a few years old then HP may have decided not to release scanning support for 10.8. The reason would not have had anything to do with Apple electing not to give them the capability.
But if the Apple KB article shows a scanning driver for your model, then this is known as an ICA driver and is designed to work with Image Capture and Preview that are included with OS X. So if you have this printer connected to the Mac via USB cable and you open Image Capture, does the HP appear in the list of devices in the left column of this application? -
ILife does not appear as purchased in the Mac App Store
I already bought the CD iLife 11 but in the Mac App Store does not appear as Purchased, how can I do it? Thanksi
tomhus wrote:
There is no way to solve it?
What do you need to Solve...?
tomhus wrote:
...If I already bought the software, I don find the reason to buy it again...
Why would you want to buy it again...? -
IChat - Host does not support Kerberos authentication
Hi all,
I have been trying but with no success to set up an iChat server on 10.6. Our OS X server is bound to AD and will hopefully be using AD to authenticate the iChat clients. I have followed Apple's guide on commenting out the <!-- <cram-md5/> --> section of the c2s.xml file which hasn't solved our problems. Open Directory isn't running as a master it is connected to another directory (our AD directory), and as a test I set up a Wiki server on the same box and this does allow us to authenticate against AD.
The error message we are receiving in iChat is "The host example.com does not support Kerberos authentication. The client is set to use Kerberos, the username format is [email protected] all I think the correct settings.
Under iChat General Settings on the server the Host Domain is example.com, SSL Certificate: No Certificate, Authentication: Any Method, and Enable XMPP server-to-server federation is enable for all domains.
This is our jabber fullstatus:
jabber:state = "RUNNING"
jabber:readWriteSettingsVersion = 1
jabber:logPaths:PROXY_LOG = "/private/var/jabberd/log/proxy65.log"
jabber:logPaths:MUCSTDLOG = "/var/jabberd/log/mu-conference.log"
jabber:logPaths:JABBER_LOG = "/var/log/system.log"
jabber:proxyState = "RUNNING"
jabber:currentConnections = "0"
jabber:currentConnectionsPort1 = "0"
jabber:currentConnectionsPort2 = "0"
jabber:pluginVersion = "10.6.100"
jabber:serviceMode = "CHATSERVER"
jabber:domainName = "example.com"
jabber:mucState = "RUNNING"
jabber:servicePortsAreRestricted = "NO"
jabber:servicePortsRestrictionInfo = emptyarray
jabber:hosts:arrayindex:0 = "example.com"
jabber:setStateVersion = 1
jabber:startedTime = "2010-10-07 16:12:01 +0100"
jabber:jabberdState = "RUNNING"
This is our changeip -checkhostname:
Primary address = 192.168.1.20
Current HostName = ichat.example.com
DNS HostName = ichat.example.com
The names match. There is nothing to change.
dirserv:success = "success"
Any help with this would be much appreciated, and I can supply further logs details if needed. I have used example.com to protect our domain name but i kept the format identical.
Cheers,
ChrisFrom the console:
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) The USER environmental variable changed out from under us!
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) In a future build of the OS, this error will be fatal.
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) The USER environmental variable changed out from under us!
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) In a future build of the OS, this error will be fatal.
08/10/2010 13:00:52 iChatAgent[2875] [Warning] JConnection: Error: Error Domain=XMPPErrorDomain Code=122 UserInfo=0x10020b680 "The host corepublishing.co.uk does not support Kerberos authentication."
The iChat server log shows this at the same time:
Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] connect
Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] disconnect jid=unbound, packets: 0 -
Image cannot be rendered because Aperture does not support image format
Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One -
Lumia 1520 does not support Bluetooth Keyboard (HI...
I would very much like to buy a Lumia 1520 as it would spare me from carrying both a phone and a tablet.
However, I am not going to as, for reasons which utterly defeat me, the Bluetooth stack does not support a keyboard. The HID (Human Interface Device) aspect has not been included.
I am utterly baffled by this simple omission. From my Nokia N95 through to my N8 I was able to use a keyboard. I even still have a Nokia one which folds.
Would someone from Nokia be good enough to:-
a. let me know why this bit of simple but basic functionality has been left out?
b. when, if ever, it is likely to be included in an update?Agreed on all points -
1. Lack of HID support is a glaring omission that needs to be fixed
2. Microsoft is responsible for omitting HID support (which existed in Windows Mobile 6.5!)
3. There is hope for the future when Nokia/Microsoft collaboration is tighter after the merger.
As mentioned above, a WP device can see a bluetooth keyboard - it can even perform the pairing handshake. It generates a random code, you enter the code on the BT keyboard, the two become paired. But then nothing.
I can add a little insight to this conversation: If you were to ask Microsoft folks, the answer would probably go something like this: "We have a finite number of resources. So to support one feature, we'd have to cut something else. What feature would you be willing to lose in exchange for HID support?"
I am basing this on similar conversations I've seen on MSFT discussion boards about support for entire-device backups - not piece-meal app-supported "in the cloud" data storage, but total backup/restore functionality.
I personally think it is embarassing that Windows Phone does not support the HID profile. I know we're getting close. The code is already on Windows RT for tablets. So I sure hope it's in the pipeline for WP. Time will tell I suppose. -
Confirmation that 5.0.2 does not support MIPS
Hi,
Can any one confirm that the latest version of 9i Lite (5.0.2) does not support MIPS processors on the handheld devices.
Thank,
Michael Bayingshttps://discussions.apple.com/message/21546508#21546508 check this out
-
HT204655 Photos for Mac does not support semi professional camera Nikon D7000!
Since Nikon does not support USB storage mode, the (semi)professional line of Nikon cannot be used to import pictures!!
This is a serious flaw in the program. Aperture supports Nikon D7000, Image Capture supports the camera but the latest and greatest has forgotten all about supporting market leader's camera's?
The main and only reason NOT to use Photos... Or did I miss something here?Sorry guys, forget all about it. I switch my camera off and on again (while it was connectoed to the Mac) and it appeared in Photos.
No idea what happened, but I can import my pictures.
Cheers,
Maybe you are looking for
-
My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out
-
HT3529 how do i download a specific trail of SMS's that i require for records?
Hi, Can you please help me with downloading SMS's from my iPhone onto a PC. I need a specific trail of SMS's for my records before Apple reset my operating system on my iPhone 5 thanks Matt
-
Ipod screen is black how do i fix it?
My ipod camera screen went blank how do i fix it?
-
Mail Missing Plug-in after sending; quit and restart Mail fixes it
mail > Missing Plug-in after sending; quit and restart Mail fixes it. Its very obnoxious after all these years to have Apple Mail continue to complain about Missing Plug-in This happens for PDFs, .zips, .jpgs and other types. Any ideas why Apple cann
-
How to create a file in a particular DIR?
say I want to create a file as C:\myfile.xml , instead of current working DIR. how to do that? thanks