Folio builder doesn't work

         I can't use Folio Builder: I have already installed both the Panel and Tools, but when I open Indesign it still says that I have to donwload and istall the new version... But I DID it!
     I have Mac and Indesign CS5.5 what I have to do? Please, I have to use Folio Builder to complete my final proget for the university!

Thanks for your reply -
It's not the Adobe account that I have a problem with but the second user account on my computer that I had to create. So I log into my mac as a different user. My folio builder works on one user but not the other and is essentially the same software being used.  I just open it as a different administrator. I can log into folio builder as my second computer user all ok but the other prompts for an update to the tools.
It means I have to log in and out as different users just to use folio builder. Any ideas?
This issue we have with two separate machines in our studio - they each have two separate mac user accounts so we can access the folio builder.
I hope this makes sense - any feedback to fix this would be a massive help!
Many Thanks

Similar Messages

  • Update to 1.1.3 - but Folio Builder doesn´t work!

    Hi,
    we read every post about the current problem with the different versions of the folio builder.
    We have a new PC with Windows 7 and CS5 (no Prerelease Tools installed).
    I have installed and removed every version of dps and folio tools.
    On my Mac Book with CS5 it works, on a second PC with CS 5.5. it works but on our PC with CS 5 it doesn`t work.
    I have installed the following Tools:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5018
    I get the [srv.unknown} error - ok - I read the post that it is important to install version 1.1.3.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5154
    I installed the version 1.1.3 and get the following error when I try to login the folio builder panel.
    In English: error during communication with server. Please check your network communication and try again.
    Thanks for your support
    With best regards
    lnsmedia

    We're having the same issues. Yesterday, Monday the 12th, everything was working okay. Today, I can't upload a simple two page folio. Any ideas?

  • Folio Builder doesn't open

    When I go to Window > Extensions in my InDesign CS5.5 (Mac), Foilo Builder is there but absolutely nothing happens when I try to select it. All other extensions there open up, but not Folio Builder. I have uninstalled Folio Producer tools, the Folio Builder panel alone, then re-installed the latest CS5.5 updates (yes, not the CS5 updates) for both many times, with the same results. I had Folio Builder working previously, after updating it, even having a folio built, but now the panel just doesn't open. Anyone know how to fix this? I've run out of ideas. Thanks.
    Fred

    Thanks for your reply -
    It's not the Adobe account that I have a problem with but the second user account on my computer that I had to create. So I log into my mac as a different user. My folio builder works on one user but not the other and is essentially the same software being used.  I just open it as a different administrator. I can log into folio builder as my second computer user all ok but the other prompts for an update to the tools.
    It means I have to log in and out as different users just to use folio builder. Any ideas?
    This issue we have with two separate machines in our studio - they each have two separate mac user accounts so we can access the folio builder.
    I hope this makes sense - any feedback to fix this would be a massive help!
    Many Thanks

  • Folio Builder CC not working.

    Hello All
    I am in dier need of assistance - My folio builder panel will NOT import layouts, existing ones, new ones, any layouts. Won't import single, won't import multiple.
    I can create the folio shell but I can't import any information into it.
    Been on the phone to tech support all morning, to no avail.
    I have thus far:
    •Quit inDesign and restarted it
    •Restarted my whole machine
    •Deleted all my preferences
    •Uninstalled ALL the creative cloud programmes
    •Used the cleaner tool
    •Created a new admin account and installed creative cloud and solely inDesign
    •Thoroughly tested article imports to no avail/same issue.
    •Ran the cleaner tool on said test account and reinstalled Creative Cloud desktop and inDesign
    •Ran for updates to check I wasn't behind on anything.
    And it STILL doesn't work, I am really at a loss
    NOTHING is working, I am stuck with my builder panel like this...
    I desperately need help
    Any suggestions?
    Best
    Tim

    It's difficult to tell whether this is an issue with the Folio Builder panel or a problem with the source files you're trying to add/import.
    If the Folio Builder panel doesn't seem to be working properly, try this:
    1. Quit InDesign and any other CS apps.
    2. Delete the opm.db file located in /Users/"your user name"/Library/Application Support/Adobe/OOBE/opm.db, and then start InDesign and try signing in to the panel.
    If your system files are hidden, hold down Option and choose Go > Library in Finder, and go from there.

  • DLL build by Labview App Builder doesn't work if Built-IN functions used!?

    Hi All,
    I hope somebody shed some light on this;
    (All VIs are in the attached case1-2.zip)
    Case 1:
    A VI reads a 1D array data and Uses RMS.vi to calc the rms of the data and returns the rms value and the error value. (make1_dll.vi).
    This VI is used to build a DLL. (test1.dll using the test1.bld)
    Call this DLL in a new VI (just to test that the DLL works) (test1.vi)
    RUN the new VI >>> Result Nothing happens No Error or Crash and No result!!!
    Case2 :
    Build the above without using the “RMS.vi” and works OK. (see case2 VIs)
    Any idea why the build-in function doesn’t work?
    Best regards
    Attachments:
    case1-2.zip ‏44 KB

    Joel A wrote:
    You might want to look at the path building you are doing to find the RMS VI. If you are using relative paths, then LabVIEW calls like "VI Path" will have an extra path if the VI is an exe or inside an LLB.
    Drop some probes (indicators, outputs, etc.), rebuild and double check the paths. I've been burned by this before...
    If this is the case, you can use the VI properties, or path parsing to solve it.
    joel
    I don't think that is the problem. The RMS.vi is referenced as statically linked VI in the make1_dll.vi.
    As such it should be linked into the LabVIEW DLL as well. What I suspect is the problem is the fact that
    the RMS.vi uses the lvanlys.dll and that for some reason there is something going wrong with the LabVIEW
    test1.dll, which runs in the LabVIEW runtime context, calling lvanlys.dll while executed in the context
    of LabVIEW itself. Probably something to do with the changes to how lvanlys.dll is treated between LV 7.0
    and 7.1.
    I see this same behaviour on my system too, so an installation problem is quite unlikely. Other than that calling a LabVIEW dll from within LabVIEW makes not that much sense (but did work fine in the past save from some hassles in 6.0 and 6.0.1), I have no explanation why this doesn't work.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Just installed DPS for windows cs6 and Folio Builder isn't working

    I've just installed the DPS for windows CS6, but there are no options in the Folio Builder, yet i can create new Articles. How do i get the Folio Builder working?
    Does it need to be connected to the internet? I work for a large organisation and have firewall restrictions limiting internet access from In Design, but thought i could work offline.
    Any clues to what i might be doing wrong?
    Thanks

    Yes, CS6 Creative Cloud on Windows 7. I also am running this on my old Mac Pro which is working fine. (I only run one at a time to avoid license problems).
    Anything related to the "folio" is empty or functionless. I can see the Folio Builder and Folio Overlay panels, but nothing is in the windows. I installed the CS6 DPS tools as well.

  • Folio Builder Preview not working

    I click Preview and I don't see a preview! I see the Preparing Review staus bar and Checking Folios but when it completes I see nothing.
    On an earlier version of the magazine I had set the default image as PDF on some articles, these showed a blank gray preview. So I created a complete new set of folios making sure the default format was JPEG but this time I have no previews at all.
    Any ideas guys?

    Thanks David
    Folio Builder is 11.3.3.20110819_m_663171
    7.0.3.12
    Win CS5
    Window>Interactive>Preview works but that is limited to a single page.
    The other two options still don't work. I have tried deleting and re building single Folios to ensure that PDF was not selected but with no success, no preview at all not even gray.
    Air installed 18/9/2011
    Folio Builder installed 26/8/2011
    Folio Producer installed 13/6/2011
    I assume I have the latest Air and Folio Builder but should I update Folio Producer?
    Graham

  • Uploading content via folio builder does not work

    Hi,
    Working in inDesign and having a problem with the Folio Builder.
    Does anybody know what is going on when I have created a folio, then an article and the folio builder states 'Building Folio...Done' and there is a loading symbol suggesting the article is uploading but it never does. (see attached image). We are not subscribed to either Digital Publishing suite service so we are only allocated one Folio per Adobe ID. Could it be a conflict between a previously installed version (CS 5) of the Folio extentions, which was incorrect as we are working on C5.5 — I subsequently deleted the CS5 folder manually and installed the correct version for CS5.5.
    Thanks,
    Colm

    Colm before you get help from our pros I will say what happened and worked for me.
    I had the same problem and it took two whole days to solve it.
    When things stopped working and the process was hanging I would have to kill In-Design. On Windows you go to the task manager and end the program.
    This never seemed to cause a problem for In-Design. Right away I would restart the program and start over again and things would finally work.
    Go to your Acrobat.com account and see if the file is there. Most often it is. Even though the builder was hung up some how the file ended up on Acrobat.com site.
    Click on your cover file in Folio Builder and then try clicking on Preview. If you are able to view your file in Content Viewer on your PC then your problem
    may be different than mine. I could not preview my file. Once this preview problem was solved all the other problems went away.
    Consider these points as a starting point and then we will give you more ideas.
    John

  • Folio Builder doesn't allow me to add certain articles

    I'm adding articles to folio builder and it's being a little picky about which ones I can add and which ones I can't. They're all formatted in the same size etc., but for some reason 3 of my 30 articles won't give me the "add" option or if I add them they hang and it crashes InDesign. Any ideas? Are there specific types of things I should look out for in regards to how I format my documents so that they'll play nice w/ Folio Builder?

    It's a tough one, Visslette... Of course, you checked the obvious stuff, so you need to supply a bit more info. What formats and orientation are they, are they smooth scrolling or staggering, did you check to upload them to a new magazine (just for the sake of checking the change), do they total over the 100 MB limit ?

  • DLL created with LV 7.1 Application Builder doesn,t work when analysis subVIs are present

    I'm looking for a solution of the following problem.
    The DLL created by the "sum1.vi" source works properly, while the DLL create by "sum2.vi" always gives a zero result.
    The "sum2.vi" source contains an additional "Hanning Window" VI (not wired), that seems to be the cause of the problem.
    If I delete the Hanning VI and re-build the DLL, the same works fine
    Is there a solution or is it not possible to make Labview DLLs when containing analysis VIs as filters, windows, FFTs, and so on?
    Thank you for your answers.
    N. Roberto
    Attachments:
    sum1.vi ‏12 KB
    sum2.vi ‏14 KB

    Roberto N. wrote:
    Thank you Jordan, I'm using Labview 7.1.
    Anyway I've resolved the problem by adding the "lvanlys.dll" file (present in "..\Labview 7.1\resource\lvanlys.dll" path) as support file in the building process. Now the DLL containing the analysis functions works correctly.
    Natalino Roberto
    Ok, you probably got lucky since the lvanlys.dll seems to implement that function directly. However most Advanced Analysis functions are just redirected by lvanlys.dll to the Intel Math Kerneal Library that gets installed with LabVIEW 7.1 and higher. The only way to get that properly installed with your LabVIEW executable or DLL is to create a LabVIEW installer in your Application Builder and make sure to select under "Installer Settings->Advanced" the "LabVIEW Run-Time Engine" and the "Analyze VIs Support". Then use that installer to install your DLL on another computer.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Visual Query Builder Doesn't Work

    I'm using the ColdFusion extensions to Flex Builder 3
    (3.0.1.205647), and I can't use the Visual Query Builder. This is a
    fresh ColdFusion8 install. I have RDS configured, I even test the
    connection successfully.
    I can use the RDS DataView and see the databases, click on
    cfartgallery, for example, and show the 'art' table contents. No
    problem. Then I click the 'Visual Query Builder' button, and
    nothing happens. The query builder does not show.
    It's not a big deal until I try and run the CF/Ajax app
    wizard, and editing the master page is supposed to open up the
    query builder...same problem. Even here it won't open. So, I can't
    edit anything or use the wizards at all. I don't get any error
    message, it just doesn't do anything when I click the button.
    Anyone else have this problem? Is there some setting I am
    missing or have to configure after a fresh install in the CF
    administrator?

    Using vista?
    Right-click on Flex and click Run As Administrator
    Ken Ford
    Adobe Community Expert Dreamweaver/ColdFusion
    Fordwebs, LLC
    http://www.fordwebs.com
    "adimauro" <[email protected]> wrote in
    message
    news:g8pt2n$jh1$[email protected]..
    > I'm using the ColdFusion extensions to Flex Builder 3
    (3.0.1.205647), and
    > I
    > can't use the Visual Query Builder. This is a fresh
    ColdFusion8 install. I
    > have
    > RDS configured, I even test the connection successfully.
    >
    > I can use the RDS DataView and see the databases, click
    on cfartgallery,
    > for
    > example, and show the 'art' table contents. No problem.
    Then I click the
    > 'Visual Query Builder' button, and nothing happens. The
    query builder does
    > not
    > show.
    >
    > It's not a big deal until I try and run the CF/Ajax app
    wizard, and
    > editing
    > the master page is supposed to open up the query
    builder...same problem.
    > Even
    > here it won't open. So, I can't edit anything or use the
    wizards at all. I
    > don't get any error message, it just doesn't do anything
    when I click the
    > button.
    >
    > Anyone else have this problem? Is there some setting I
    am missing or have
    > to
    > configure after a fresh install in the CF administrator?
    >

  • Release build doesn't work

    Hello,
    I have an app with dynamic forms, and one piece of functionality is the ability to copy all the values of the fields on a form, and paste them onto another form page.  This works perfectly when I run my app in the following ways:
    1.     Run it from Flash Builder.
    2.     Run it from Flash Builder in debug mode.
    3.     Run the release build by opening the app in python with:
                   import os
                   os.system('/Applications/MyApp.app/Contents/MacOs/MyApp')
    The coping and pasting of pages does not work when I run in the following ways:
    1.     Run it by double clicking on the app in my /Applications folder.
    2.     Run it in python with:
                   import os
                   os.popen('/Applications/MyApp.app/Contents/MacOs/MyApp')
    3.      Start it in a terminal by typing:
                   /Applications/MyApp.app/Contents/MacOs/MyApp
    I have no idea how to debug this problem, does anyone have any ideas?
    Thanks,
    Craig

    Update:  I used try {} catch (){} to isolate the error.  It was a 1023 stack overflow error, meaning my recursive loop repeats too many times for the release build, but not--apparently--for the debug launcher.  So now I have to completely reconfigure my code.  Weak.

  • LabVIEW 5.1.1 App Builder doesn't work on WinXP or 2k?

    G'Day All,
    I have a client that needs some apps written in LabVIEW 5.1.1 built into exe's, but I've found that once I install the App Builder on my Windows XP and 2000 PCs, I get "dist build app image subvi is not executable" - I've tried opening the wiring diagram to fault find, but it is understandably passworded. Has anyone come across this problem, and if so, how do I get around it?
    cheers,
    Christopher
    Christopher G. Relf
    Certified LabVIEW Developer
    [email protected]
    International Voicemail & Fax: +61 2 8080 8132
    Australian Voicemail & Fax: (02) 8080 8132
    EULA
    1) This is a private email, and although the views expressed within it may not be purely my own, unless specif
    ically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
    2) This email has NOT been scanned for virii - attached file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
    3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

    Christopher
    LabVIEW 5.1.1 is not supported under Windows XP. The first LabVIEW version that we tested and do officially support under this OS is 6.1.
    On Windows 2000, you may get this error if you install the Application Builder 5.1.1 on the machine that has LabVIEW 5.1 on it. Both versions have to be the same.
    I Get Errors After Installing Application Builder 5.1.1 On Top of LabVIEW 5.1
    Zvezdana S.
    National Instruments

  • "Print each stage of builds" doesn't work as expected

    Hi,
    I try to create a pdf of my slides. Therefore I use the print dialog and save the slides I want as pdf. I also want to "Print each stage of builds" which produces some unexpected result. If I use the option "Print each stage of builds" the numbering of the slides seems to change.
    Example:
    1. Make a presentation with three slides.
    2. Put three lines of text on every slide (e.g. "Slide I / Line I" for the first line of text on the first slide and do it this way for every slide and line. This will give you unique information on the output.)
    3. Add an animation for every line to appear after a mouse click
    4. Print slide 3 to 3 and select the option "Print each stage of builds"
    Question: Whats the output of the pdf?
    Answer: The first slide with two lines .
    But this is definitely not what I want if I want to print slide 3, especially if you have a presentation with about 290 slides (for a lecture) and you want to print only a few of them.
    Is there a workaround?
    regards,
    Wolfgang

    The forum just suggested https://discussions.apple.com/message/7081392#7081392 and https://discussions.apple.com/message/9099305#9099305 — don’t know how I missed those before, since they seem to be the same problem.
    Those are from 2008 and 2009. Anyone from Apple reading this? Worth writing a Radar?
    -- Mike

  • Ipad app builder doesn't work

    when i click on create app it says, An error has occurred while launching the DPS App Builder application.
    Failed to find DPS App Builder application.

    It sounds like DPS App Builder wasn't installed properly. Please look for DPS App Builder in the Applications folder. If you see it, please move it to trash, and then install it. You can install it by going to http://www.adobe.com/go/digpubsuite_vb_mac or by signing in to the DPS Dashboard (https://digitalpublishing.acrobat.com) and clicking the DPS App Builder for Mac link.

Maybe you are looking for