Folio Builder Error: Source Files Not Found

I'm having some weird issues with DPS that are preventing me from editing folios. Whenever I try to update, import or add an article to a folio (whether it's a new or existing folio), I get one of the below error messages saying that the source files cannot be found. However, I haven't moved any of my files. Also, it doesn't make sense that I get this error when creating a new folio and trying to import/add a new article as I'm inputting where the files are located.
I've also tried reinstalling the Adobe folio tools. Anyone know what's going on? Thanks for the help.
Error message text:
"An error has occurred opening the source file for the article layout. The InDesign file for the layout cannot be found."
"Content generation error. [SourceFilesNotFound]"

Fuzzpocket17's issue was found to be caused by the following:
He had a working install of InDesign and the Folio Producer tools when he left on vacation. When he came back, he did not. It turned out that his IT had converted his user account on his Mac to be a Managed Mobile account, synching their data to a new network volume named "Users". When he unmounts that volume, all his Folio Panel activities returned to normal. T
o see if you have a Managed, or Managed Mobile account, open the System Preferences and choose the Accounts pane. Look at the description under your account. Here is what a Managed Mobile account looks like:
Managed accounts have the ability to be restricted in many ways. One of those restrictions could be preventing the application from reading/writing to the CS<N>ServiceManager folder refernced in my earlier post. Again, if you find this to be the case, consult with your IT. You may need to revert to a non-Managed account to have the Folio Builder panel operate correctly, until your IT can ensure normal user/library file access.
Sincerely,
Matthew

Similar Messages

I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\ verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

error 13.11 Source file not found verify that the file exsist

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Error 1308.Source file not found with 9.4.2 Admin Install point

I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
    Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks.

I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

Why do they even offer a free trial version of livecycle es4, when its obviously not free??????
i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
a messsage pops up saying Error 13:11 Source file not found verify file exsist. what does that even mean?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Error 1311, Source file not found, measurementstudio5.cab

I'm installing Measurement Studio for Visual Studio 6.0 and I encounter: Error 1311 Source file not found, measurementstudio5.cab
Any ideas?

Hello David,
I am also experiencing an Error 1311, but during the install of LabVIEW 2012 and 2013 (64-Bit).
Win7 x64, Acer laptop.
First problem I encounter is:
After putting in my info and agreeing to the licence agreements, the first error pops up says the followign:
NI LabVIEW Run-Time Engine 2011 SP1:
Error 1310. Error writing to file: Crogram Files (x86)\Internet Explorer\Plugins\LV2011ActiveXcontrol.dll. Verify that you have access to that directory.
Options: Abort/Retry/Ignore
Things I've tried:
Retry button--never get's past the error.
Uninstalling Internet Explorer and restarting--Still assumes that it's there, and error remains.
Reinstalling updated Internet Explorer and restarting -- no change.
Checking the directory file and verifying that permissions for every user and System is set to full control -- No change.
The only way to get past this error seems to be to press the Ignore button.
A few moments after ignoring the first error, another error pops up. It says:
NI Labview Run-Time Engine 2011 SP1:
Error 1311. Source file not found: C:\Users\[my U/N]\Desktop\National Instruments Downloads\LabVIEW 64-bit\2013\Products\LabVIEWruntime_mft.cab. Verify that the file exists and that you can access it.
Options: Retry/Cancel
Things I've tried:
Verifying that the file exists (it does) and that I have access to it (I do) and checking the permissions to verify full control --no changes.
Retry -- does nothing.
Cacel --aborts the installation and indicates instal failure.
Can you help me with this? I've installed LV on two other computers and they worked fine, but my laptop simply doesn't want to take the install.
Thank you in advance,
Thomas

ERROR 1311: Source File Not Found. Data1.cab

Hi
Trying to install upgrade Acrobat Pro XI on Server 2003. We already have Acrobat Pro 9 installed.
Install starts and is halted midway by message "Error 1311: Source File not found. Data1.cab. Verify that the file exists and that you can access it."
Heeeelp me please. Thanks

See the following help document:
Errors 1311, 1335, 2350 :
http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html

Error 1311....source file not found Adobe Acrobat 8.2.0

I have Vista. I keep getting installing boxes and error messages:
Error 1311. Source file not found: C:\Program Files\Adobe\Acrobat 8.0\Setup Files\{AC76BA86-1033-0000-7760-000000000003}\Data 1.cab.
Verify file exists and that you can access it.
I cannot find that file in the set up, so it's obviously missing. I have tried uninstalling, but still get the error messages, even though the Reader is working on my PC...it's just so annoying as I am constantly cancelling installation and cancellation boxes. Can I install this file?
Thanks!
Message was edited by: Woodlandia36

"I tried to uninstall Adobe Creative Master Suite CS3. It hasn't uninstalled completely and has left traces of it still being on my system."
You could always "wipe the slate" clean.
Any and all Adobe folders would be manually deleted. (Shift+Delete to remove them from the hard drive, not send to the recycle bin)
Click Start and Run. Type regedit and hit enter.
Under HKEY_LOCAL_MACHINE\SOFTWARE delete all Adobe Folders (not just the keys, the whole folders - click once and hit Delete)
Under HKEY_CURRENT_USER\SOFTWARE do the same
Under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon Change the value for the AllocateCDRoms entry to 0. (Right click and select Modify - type 0 and hit enter)
Exit the Registry Editor.
Reboot
You should not see this error anymore
Note: I only recommend this because you indicate that you have already attempted removing the entire creative suite. This will render it unfunctional if you do it. If you aren't comfortable with editing your registry, disregard these steps.

Error 1311 Source file not found? Plus another error. I need help bad!

Error 1311. Source file not found. S:\Documents and Settings\Owner\Local Settings\Temparary Internet Files\content.IE5\45UJKXYZ\ja150000[ 1 ].cab. Verify that the file exists and that you can access it.
That appears when trying to install Java 5 update. What can I do to fix that?
This is another error I've got.
hs_err_pid424 error
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x64DAD49
Function=Java_sun_awt_windows_WToolkit_printWindowsVersion+0x1CB9
Library=C:\Program Files\Java\j2re1.4.2_08\bin\awt.dll
What's those mean and how can I fix them? Plus after installing J2re1.4.2_08 I get a fuzzy looking screen and lines look doubled or outlined some.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

Error 1311 - source file not found...m182.cab

Good Morning,
I am trying to reinstall Crystal Reports XI on a blade server and the installation will not complete. I receive message, "Error 1311. Source file not found: Z:\win32\m182.cab. Verify that the file exists and that you can access it."
I did a complete uninstall of Crystal Reports and removed the Crystal folders from program files directory as well. Is this a file that may be downloaded"
Thanks,
T.I. Walker
Clarendon Health Systems

Crystal Reports XI has 2 disks that I am using. It never completes installing from disc1, this is when the error occurs. It never advances and prompts to install disc2.
thanks

Error 1311 Source file not found

Hi.
I have tried to repair my Adobe Acrobat 9.0 because it's not working. I got Error 1311 source file not found.
then the following path c\ProgramFiles(x86)\Adobe\Acrobat9.0\Setup\Files\{AC76BA86-1033-F400-BA7E-000000000004}\D ata1.cab
Verify that the file still exists and that you can access it.
What do I do now? I can't open any PDF files from the net.
Also, I have rec'd the following: Unable to find Adobe PDF resource files.
C\ProgramData\Adobe\AdobePDF\Settings\*.joboptions Then it said you must have administrator privileges to install these files. Contact your local administrator. How do I do this? I am the administrator on my home computer!

Thank you Pat.
A couple of things...
First off I am disabled and sometimes a little slow on the uptake.
Subsequent to my first query, I was successful in downloading the Adobe
Reader XI. However it only allows me to view PDF's that reside on my
computer. If however I want to look at any docs on the web or that people
send me via e-mail I cannot see them They flash for a moment, like a tease
and then say there was a catastrophic crash with not much after that.
If I follow your instructions below, I presume that I will be deleting the
A R X1 as well and as it was very very difficult to get it is the first
place, would you be able to help me with a reinstall?
I think what happened is that my grandson did a "cleanup" on my computer
and deleted only parts of programs...and thus the part that are missing
will not allow for the subsequent updates.
So...thank you for your patience and confirm that I should uninstall and
using the cleaner and then reinstall using the links you provided?
Thank you so much!
Sass
On Wed, Oct 29, 2014 at 1:40 AM, Pat Willener <[email protected]>

I reinstalled my OS as I do every year or so. when I install CS4 I do not have Premiere Pro Adobe Premiere Pro Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists

Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists and that you can access it.

And what exactly? You have not provided any system info or other details.
Mylenium

Error 1308.Source file not found

During installation of Desigtime Component of Identity Manager I get an message:
"Error 1308.Source file not found: C:\Identity Center\DATA_UNITS\IC_DESIGNTIME_71\Setup\program files\SAP\IdM\Identity Center\...\Windows-Change authentication method for RSA Auth Mgr user.dept. Verify that the file exists and that you can access it."
Then I have option to Retry (which does not work); Ignore or Abort.
Please help
Edited by: Junaid Maniya on Dec 31, 2009 8:22 PM

Hello
Sounds like you got a corrupt installation file.
Step 1: Download it again from SAP
Step 2: Extract with 7-zip

Run-time error 53 File not found (makes BI Publisher quite unuseable!)

Upgraded to BIP v 10.1.3.3.2
Open a template with the template builder
Load a source XML file
Proceed to choose Insert-> Field....
Microsoft message pops up:
Microsoft Visual Basic
Run-time error '53':
File Not Found.
This error, according to Microsoft and other technical sources SHOULD actually tell you what the file is that isn't found, however when run through the template builder, it never tells you any file name, just the above error message!
I saw one other post on this forum about this problem, and it was related to the Java Home, so I went to TOOLS-> OPTIONS and my java home there is:
C:\Program Files\Java\jre1.5.0_12
So this should be high enough JRE version.
ANy suggestions? What file or *.DLL can it not find? We have many people at a client (and me!) that have this issue.
-Greg

Pradeep,
I am not trying to utilize the desktop template builder to log onto BIP enterprise.
I am using it in an E-business suite environment, not a standalone BIP enterprise reporting environment. I simply use it right now to develop templates when I have valid XML to work with.
Many other features are working, but any features that seem to be new such as repeating group, conditional region, conditional format, the insert field palet, among others.
ANY feature that requires a .net service to be kicked off works only 10% of the time.

Preverify doesn't work. Always return error 2 "File not found"

Hello,
I have this configuration:
- Latest JDK and JRE
- Ubuntu Linux 7.10 64 bits
- NetBeans 6RC2 Mobility Pack
When I try to build a project, NetBeans returns:
Preverifying 6 file(s) into /home/alfredbaudisch/NetBeansProjects/GameBuilderDemo2/build/preverified directory.
java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
Then I downloaded WTK 2.5.2 by myself and tried to build it using the toolbar:
Creating project "GameBuilderDemo2"
Place Java source files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/src"
Place application resource files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/res"
Place application library files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/lib"
Settings updated
Project settings saved
Building "GameBuilderDemo2"
java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
Build failed Any suggestion?
Thanks.
Edited by: AlfredBaudisch on Nov 25, 2007 1:36 PM

The problem was that WTK was not accepting JRE 64-bits, then I installed JRE 32-bits and set up WTK to look for it.
I wrote an article about the platform Ubuntu + NetBeans 6:
http://mobiledeveloper.auriummobile.com/index.php/2007/11/25/perfect-java-development-platform-with-ubuntu-710-and-netbeans-6/
Edited by: AlfredBaudisch on Nov 25, 2007 6:47 PM

ERROR: OUI files not found at their expected location. while cloning 11.5.9

Dear Friends,
Getting error when cloning 11.5.9 from PROD to DEV:
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
I applied the patch 5035661 also but still the error exists.
Please let me know the fix.
[appldev@betestoracle bin]$ perl adcfgclone.pl appsTier
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Enter the values for the new APPL_TOP Context:
Does the target system have more than one application tier server node (y/n) [n] ?:
Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
Target system APPL_TOP mount point [apps/applprod/prodappl]:/apps/DEV/devappl
Target system COMMON_TOP directory [apps/applprod/prodcomn]:/apps/DEV/devcomn
Location of JDK 1.3.1 on the target system [usr/java/jdk1.3.1_10]:
The new context file has to contain port numbers related to target system.
Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:n
Clone Context uses the same port pool mechanism as the Rapid Install
Once you choose a port pool, Clone Context will validate the port availability.
Enter the port pool number:[0-99]
50
Checking the port pool 50
done: Port Pool 50 is free
Web Listener port is 8050
Complete port information available at /apps/DEV/devappl/admin/out/PROD_betestoracle/portpool.lst
Backing up /apps/DEV/devappl/admin/PROD_betestoracle.xml to /apps/DEV/devappl/admin/PROD_betestoracle.xml7.bak
Creating the new APPL_TOP Context file from :
/apps/DEV/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/apps/DEV/devappl/admin/PROD_betestoracle.xml
Log file located at /tmp/CloneContext_05131045.log
Please enter the APPS password:
apps
Running Rapid Clone with command:
perl ./adclone.pl java=/apps/DEV/devcomn/util/jre/1.1.8 mode=apply stage=/apps/DEV/devcomn/clone component=appsTier method=CUSTOM appctxtg=/apps/DEV/devappl/admin/PROD_betestoracle.xml
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
Starting application Services for PROD:
Running:
/apps/DEV/devcomn/admin/scripts/PROD_betestoracle/adstrtal.sh APPS/<appspwd>
Regards,
DB

ERROR: OUI files not found at their expected location.Please see these docs.
Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1] -- adcfgclone.pl appsTier fails with "ERROR: OUI files not found at their expected location"
Preclone DBtier Fails: Error: Oui Files Not Found [ID 739589.1]
Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite [ID 812294.1]
Application Management Pack for Oracle E-Business Suite Release 2.0.x Troubleshooting Guide [ID 412044.1]
Thanks,
Hussein

Folio Builder Error: Source Files Not Found

Similar Messages

Maybe you are looking for