Folio - CREATE_FOLIO_SNAPSHOT push new revision in Edit/Contribution step

Hi,
Folio - CREATE_FOLIO_SNAPSHOT push new revision in Edit/Contribution step.
I have custom workflow and first step in the workflow is contribution step. I do not want my folio to go into default Contribution Step. I want my Folio to go into first step in my workflow. Is there any way to send new folio revision in custom contribution step?
Also CREATE_FOLIO_SNAPSHOT trigger email to Author of the Folio. I don't want to send email to Author while creating snapshot.
Is there any way where I can stop Email notification?
Thanks

Hi,
i am using service as EDIT_FOLIO and dID of my lTemplate and RevisionSelectionMethod=Specific#.
http://localhost/ucm/idcplg?IdcService=EDIT_FOLIO_TEMPLATE&dID=197&RevisionSelectionMethod=Specific#.
By using above i am getting my template FOLIO but when i am calling through code then its showing me the Error that {System Error: Unsuccessful attempt to find an unknown revision of '197'. Use 'latest' or 'latestReleased'}.
Thanks for quick responce.

Similar Messages

Checkin New Revision without checkout/browse steps.

Hi,
Is possible to do a check-in new revision for a document without check-out (that involves browse for file to upload) ? This is needed to just update some metadata fields and start a workflow process that is fired when one of the fields change from yes to no.
I already tried to use the service UPDATE_METADATA and UPDATE_DOCINFO but the workflow did not fire.
Any helps is appreciated.
Thanks,
Andres

Hi AEstrada,
nope, UCM will not trigger a workflow at all unless a new rev is checked in.
There are a number of customization approaches to do this "invisibly" though.
We at Fishbowl Solutions have created our workflow solution set which can help in this area.
On the update of a metadata field we can automatically and invisibly rev the content item so that it drops into workflow just like a normal document.
Please reach out directly if you would like more information.
Warmly,
Billy Cripe
Fishbowl Solutions

HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

JQuery Tutorial needed to customize Add New Item and Edit Item forms

Hello,
I need a tutorial to use JQuery to customize the UI Screen of SharePoint to add a new item in a list.
since I don't have prior UI experience it will be nice if the tutorial is specifically targetted towards customizing the automatic form which is presented by sharepoint when we try to add an item to a custom lists.
val it: unit=()

Hi,
According to your post, my understanding is that you want to customize the New Item and Edit Item forms using jQuery.
The following examples for your reference:
http://ankursharepoint.blogspot.com/2012/10/jquery-for-tabbed-navigation-in.html
http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
https://www.nothingbutsharepoint.com/sites/eusp/Pages/10-jQuery-Snippets-for-SharePoint-2010.aspx
jQuery Tutorial
http://www.w3schools.com/jQuery/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Gmail no longer pushes new messages to Apple Mail in Mavericks

I Googled [gmail push Mavericks OR 10.9 "use idle command"], and restricted results to the last year; absolutely nothing came up, so I decided to post this:
Gmail seems to no longer push email to Apple Mail in Mavericks—at least for me.
In OS 10.8 and before, enabling "Use IDLE command if the server supports it" caused Gmail to instantly push new emails to Apple Mail. No longer.
With the new "Check for new messages Automatically" option, new messages aren't coming in at all, or with severe delays (I don't recall which). When I change it to "Check for new messages Every minute," it checks every minute, which is okay, but not what I had in previous OSs: instant pushing of new messages.
Has anyone managed to solve this problem?
Or does anyone at least know what's causing the problem, and whether it's potentially fixable?

Nevermind. I am blind as a bat. I found the answer. There's an option under VIEWING in the preferences for Display unread messages with boldl font. I don't know why that is unchecked.

Can videos not recorded on the new ipad be edited with imovie?

can videos not recorded on the new ipad be edited with imovie?

Hi
Please rephrase Your Question - I'm not clever enough to get it
There are lot's of Cameras that record in lot's of different ways that can be edited in iMovie.
No iMovie can not use all Video-Codec's in the World - they are zillions and many needs to be converted to something iMovie can open and work with.
• Still digital Cameras as Nikons - Import into iPhoto and then in iMovie Event's window import from iPhoto-videos title
• miniDV tape Cameras - connects only via FireWire - then just Import from Camera into Event's
• SD-Card or Hard Disk Cameras Connects most ofthen via USB and Import from "File or other"
• from Internet - (out of my range - Guessing) - most will need to be converted into something iMovie likes - I would try
- StreamingDV .dv - or -
- AIC (Apple Intermediate Codec)
So as You see - I don't get it !
Yours Bengt W

Force a new line when editing a SMS

Does anybody know how I can force a new line when editing a SMS for instance,
Starting the SMS with:
Dear xxx
Now I start editing the SMS on a new line....
Solved!
Go to Solution.

Press the 0 button 3x times quickly usually works for me.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

New revision for a metadata only content

Hi all,
I'm using Webcenter Content (UCM) 11.1.1.6 and client is using a kind of documents without file associated. It's working fine with the AllowPrimaryMetaFile=true and createPrimaryMetaFile=1 variables, but client needs to have revisions of this content. We can't just update the content because they want to have a new revision for every change.
The checkout option is enabled but, when we try to create the new version, the metadata-only checkbox is missing and form asks for primary file.
Could you help me?
Thanks in advance.

I was able to replicate your issue. If I am right, the caveat is not in the fact that CHECKIN_SEL_FORM does not understand the rule, but rather that no rule is used at all (it defaults to the standard check-in).
What have I done?
- I have created a simple rule where all the three keys were filled with values as advised.
- The rule contained just the mandatory fields (security group, document type document title).
- Then, I have created a profile consisting of this rule only (defined as Excluded non-rule fields). Note that in my system Profile Trigger Field uses a custom field called xProfile, which contains values from a table, so I had to add another record to that table ("HidePrimary").
- Now, with this setup, if you check in a new item using the profile, the Primary File is hidden, but when you check out the item and try to check in a new revision (CHECKIN_SEL_FORM) it appears - no profile, but standard check in form is used.
- Therefore, I have modified the rule to contain also xProfile field (InfoOnly) and I filled it with the default value "HidePrimary". This will force the system to use the HidePrimary profile even when a new revision is being checked in.
- Finally, I verified that it really works.

HT201317 Is there a way to "stream" older photo's to my PC stored on my Iphone before I upset up "Photo Stream? NOTE: My Photo Stream "pushing function is working, but I can only push "new" photos to my PC.

Is there a way to stream "older" photos to my PC that were stored on my Iphone before I implemented "Photo Stream? NOTE: My Photo Stream "pushing" function is working, but I can only push "new" photos to my PC.

It might not be streaming but have you considered copying the photos directly off the iphone onto your PC? I plug my phone in via the USB cable like usual and in Windows Explorer, navigate to Computer\Apple iPhone\Internal Storage\DCIM\860xxxx and there they are. Copy & paste and you have pictures.
Hope it helps.

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing.

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing the existing. This is irritting.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

New Revision of the eMAC

Is Apple going to release a new revision of the eMAC with the Intel chip to the general public or a smaller & cheaper 17" iMAC ? I really like the compact design of both eMAC & its bigger brother iMAC, but do not the price of the bigger iMAC.

Hello Mikeyeddie,
You may want to spend some time looking at the terms and conditions of using these forums / discussions.
Speculation about future Apple products... Forbidden!
Duplicate posts....
http://discussions.apple.com/message.jspa?messageID=1808880#1808880
Frowned upon!
You are very new here. I hope you do get a Mac soon.
I don't want to see you get into trouble though!
Best regards.
Ian

The new revision 8.1

SSo, with the new revision of iOS 8.1 that was put out to day. Is anyone having more problems with their iPads? Should I download the forum?

I'm running an iPad 4, too and with no problems. Now, what that means for "you" is that it's technically feasible for iOS 8.1 to run fine on an iPad 4. If it wasn't okay, then it would not be running on any of them. Therefore, you'll just have to keep going down the troubleshooting trail. And I noticed that you said you had been through several processes before ... but there is one process that I'm not sure you have done yet. Have you reset your iPad 4 to factory default through your iTunes program and NOT restored your backup? In other words, left your iPad 4 in the same state it was in, before you ever added any of your data or any of your apps?
That's a troubleshooting methodology in which you'll see if that iPad 4 runs as its supposed to "right off the factory floor" so to speak, and before you ever start using it for your own stuff. I would verify that iPad 4 in that condition first, before going any further with it.
Here are the links I've put up for doing that (including doing your backups).
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

Best way to edit in audio first for a news story type edit

Whats the best way to do a news story type edit?
I want to lay down audio narration ( voiceover track ). Next I want to add picture. I want to have some flexibility to edit and move around parts of the voiceover track. I will also want to be able to move the video clips around. What's the best way to do this?
Which method would you use? All ideas are welcome.
So far I hear:
1. Edit in a text track ( as a placeholder ) the length of the proposed narration
2. Add audio ( narration)
3. Add video clips
Additional questions:
A) When I add video clips, should I do cutaways? Which offers the greatest flexibility?
B) If I do use cutaways will I eventually be able to delete the original placeholder text track?
Thanks everyone. I'm trying to get a handle on iMovie. Your responses are helpful.
-CraigarJ

I think I answered in your other thread.

When's new revision of MacBook Pro Coming Out?

any new revisions to make macbook pro even better, like the new os x coming out "leopard"? or updated ghz or fixed all the bugs, anyone have a date on that or will it take like a year like how long it took for g4 to come out to macbook pro? i want to buy the macbook pro but idk if i should wait for somethin new to come out that may come out soon and ill regret buying the current one?

Don't listen to those who have sour grapes about buying their MBP. Apple will switch the Merom right away because intel plans to roll them out in mass in August/September.
And yes, it will be faster than the current processor because it is a faster chip (anyone who says otherwise doesn't really understand processors). If you took Yonah and made it 64 without enhancing anything, then it would be the same, but its not the same. It would be like saying the P2 and P3 at the same clock speeds were identical in performance, its just not the case. They've all ready done performance tests with the Merom that prove its much faster using an imac.
You should wait though. While you could wait 10 years for more and more processors the differences on the merom (cooler, faster, 64bit) are substantially. 3 months is hardly a long wait for those kind of gains. If it was just a matter of clock speed, then it wouldn't matter, but this goes well beyond that.

Impossible to add new contact or edit

l can't add new contact or edit on my phone

Hello !
Try the following:
Simply delete all the Messenger apps (Yahoo, MSN or Live) which you might have upgraded recently / delete apps which were recently installed before the error which actually started occuring .
After that unplug the battery while the phone is still "on" and restart the phone.
In fact I had deleted a whole bunch of apps to facilitate my OS upgrade as I did not have enough memory on my Device.
This not only helped solve my above mentioned problem but also made my phone restart in less than 3 minutes (the earlier reboot was done in not less than 15 minutes !!).
Therefore my conclusion as from the above incidents is to keep your apps in the bare minimum so that your phone performs to the best.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
Thanks.

Folio - CREATE_FOLIO_SNAPSHOT push new revision in Edit/Contribution step

Similar Messages

Maybe you are looking for