Folio preview works fine everywhere but....

I have a page with a MSO. No matter where I proof it. Via my desktop via tools or via folio builder the MSO layout works as intended.
But not when I preview on my iPad via Adobe Content Viewer. (last version and now the new version)
I have deleted from Folio builder and reimported, scaled down the MSO and tried a new apporach, renamed file and reuploaded but still won't work as intended on iPad only. All other previews work just fine.
Any ideas how to fix this? What might be causing the hang up?

It worked at one point. It is auto play thru the states. Stop at last state. last state is the prior states all combined.
I just created 3 seperate .jps of the orginal Indesign document with each MSO (1 .jpg for each different MSO state and placed each one of the .jps into the Indesign doc. and made all 3 into a MSO gain.
I then uploaded via Folio builder. That Previewed just fine on the iPad Adobe Content Viewer. Worked as planned
my problem is when I built the orginal layout in InDesign using text and image boxes etc. and not exporting the whole layout as a .jpg.
That folio will Preview just fine on my Mac using all the Preview functions built into the InDesign program and folio builder. The 3 state MSO would not work once on the iPad.
This work around makes it work on the iPad but I'll have to export as a .png so the text in the document will not be so rough around the edges. Still wondering why it happened and how to fix.

Similar Messages

PDF not working, preview works fine

Hi all,
I'm having an issue where the preview works fine when tabbing through a form, but when I save it as a pdf it skips a radio group altogether or tabs to the 2nd option in the radio groups? Any ideas how to fix this?
Thanks

Try Sky's troubleshooting here. If it doesn't solve the issue for you, you'll need to contact Sky to report a fault, as detailed in the 'Contact us' section of the guide.

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

Hi, My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC

Hi,
My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC that's missing the photos.
When I open the iCloud control panel, I cannot turn on the photos. That option is ghosted. I'm running on Windows 7 with iCloud 3.0. Any ideas on how I can fix this? All help is appreciated! Thanks!

Hi Kevinmvb,
Welcome to the Support Communities!
The article below may be able to help you with this. It sounds like you may have moved your photos out of the Uploads folder where they need to reside.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Cheers,
- Judy

HT1677 In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

My iPhone got wet in the rain. Everything works fine. But The flash stays on even when no battery. Any help?

My iPhone got wet in the rain. Everything works fine. But The flash stays on even when no battery. Any help?

A liquid damaged iPhone 4 can be replaced by Apple for $149.
By the way... and electrical short can be dangerous, creating a fire or explosion hazard. You can see the short that's affecting the flash... It's the short you may not see that's affecting the battery and/or charging circuitry that's the problem.
Get it replaced.

HT3964 I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now. should i reset SMC. Would i

I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now.
should i reset SMC... would it help?

I'm doubtful it's a missing driver too, but I feel as though it's driver related. The first time XP was installed, after first boot without installing drivers, it was without sound etc, but fundamentally the system worked. Now after first boot, it's very buggy. Thanks for your suggestion Tonny. I ran the tool but it turns out the HDD is fine. Besides, everything runs fine in safe mode.
Does anyone know if (generally speaking) there is any firmware on the graphics card that would get updated via a Windows update? i.e. is it possible that Windows update downloaded a driver for the graphics card that installed new firmware that wasn't all that compatable with XP?

HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do n

I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don't know what to do, please help me?

Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

I have iWork on my new MacBookPro and it works fine. But I had the Beta iWorks in iCloud on my older desktop. How do I get the Beta iWorks off my iCloud because it is different (and better) when I use it on my MacBookPro?

I have iWork on my new MacBookPro and it works fine. But I had the Beta iWorks in iCloud on my older desktop. How do I get the Beta iWorks off my iCloud because it is different (and better) when I use it on my MacBookPro? Shouldn't the iCloud be the same as the MacBookPro iWorks

billjudy wrote:
Shouldn't the iCloud be the same as the MacBookPro iWorks
No, they are different apps. The beta one in icloud is for use by PC's as well as Mac's via a web browser and lets users collaborate on documents. It can't removed. Just ignore it if you have no use for it.

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
Eyal

I tried this! Somebody suggested it in another thread. It did not work, sadly.

We had migrated our servers from a domain to cloud. all the web applications working fine locally, but from outside they are accessible but on editing giving 404 with some request id.

hi all,
recently we migrated our moss 2007 from a domain to cloud env. everything goes well and all the application working fine locally.
but when users are trying from outside first they get promt for basic auth, that is enabled, its fine. then servers serve first page smoothly. all the application browsing is fine. but when authorized users are trying to edit a web page and they click on
anything(save, submit for publication, publish) they get 404 with a request ID. another thing if they add a new page to app and then make any changes to that page then they are not getting any issue.
please help if any one resolved that kind of issue.
thanks in advance.
SJ

Hi Sumanpreet,
Thanks for posting your issue, Kindly check out below mentioned URLs to get the fix for this issue
http://www.sharepointdiary.com/2011/02/404-page-not-found-error-sharepoint-2010-migration.html#ixzz2jHyVIFcX
http://vasya10.wordpress.com/category/sharepoint-2010/sharepoint-2007-to-2010-migration/
https://social.technet.microsoft.com/Forums/en-US/d80e7495-e889-4209-9a0a-82a852c944b1/after-migration-from-moss-2007-to-sharepoint-2010-i-tried-to-check-the-site-with-site-url-getting?forum=sharepointadmin
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

My right ear headphones won't work on my iphone 4s. I restored the iphone and set-up as new phone, this made the right ear headphone work fine. But as soon as I restored the iphone from back-up it stopped working. Pls help

My right ear headphones won’t work on my iphone 4s. I restored the iphone and set-up as new phone, this made the right ear headphone work fine. But as soon as I restored the iphone from back-up it stopped working. Pls help

Restore as New...
Redownload your Purchased and Free Apps using the Apple ID you Originally used...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

I just changed my user name to my e-mail address on my iMac. It works fine there but when I try to use my iPhone it still shows my old user name and will not let me enter??

I just changed my user name to my e-mail address on my iMac. It works fine there but when I try to use my iPhone it still shows my old user name and will not let me enter??

There is no user name needed to "enter" or use iPhones...
Assuming you mean your iTunes Store account ID:
Settings > Store > tap ID > sign out > sign in with new ID

Folio preview works fine everywhere but....

Similar Messages

Maybe you are looking for