Folio producer not updating folios on app after publishing folios

Folio producer not updating folios on app after publishing folios, before May updates it used to update my folios right away, it's been 2 days and my folios has not been published or updated. please help

yes I did, i even unpublished the folios adn then published them again, i made them public when publishing and it still doesn't make the updates on the app, on the folio producer it shows the latest files and that the updates request was sucessfull. But istill no updtes on app,
please help

Similar Messages

Cannot update or purchase apps after ios7, get message "could not be purchased at this time. please try again later."

Cannot update or purchase apps after ios7, get message "could not be purchased at this time. please try again later."

I have the exact same issue , with no answers or help available !

After my company changed the e-mail address, I had to change my Apple-ID. How do I update my purchased Apps after the change?

The renamed Apple ID does not update all the Apps but comes up with the old AppleID, but that ID is not there anymore and neither the old or the new password is working
On the FAQ pages I just find a long list of Apps, stores tc. that I have to update, but no explanation on how to do that.
I do not want to buy all the apps again just because I had to change the e-mail address and because of that the AppleID.
It is ok to remove the free ones and load them again, but the paid one?
How is Apple handling such things?

OK, after reading other and similar threads too, I found a solution myself.
Thought to share it.
On my iPhone, after the change was made at the AppleID site, I had to logoff from the old AppleID and then to relogon with the new/changed one. After that I could update all apps again

My iPhone 4s iOS 7.0.4 will not update music or apps from iTunes 11.1.3. this was true of my pc and the new MacPro.

My iphone 4s ios 7/0/4 will not update music or apps from itunes 11.1.3. this was true with my pc since ios 7.0.3 even with update 7.0.4 and now continues with my new MacPro also runing itunes 11.1.3. as most state in previous threads, syncs all non itunes related data with no issue and appears to work correctly on itunes data but then hangs on the last step of updating until it times out. i have tried marking specific music to transfer, setting up new playlist, deleting some old playlist on phone but stopped short of restoring my phone back to new due to the amount of non itunes data that i will lose. The itunes setup on the macpro was completely with the download of all music from a previous external backup and the creation of new playlist - on the first sync with existing phone it did ask to overwrite all phone itunes data with macpro itunes data which i did accept - no different result - no changes on phone.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem continues, take the device to Apple for evaluation and possible replacement.

HT4484 i used to have an app store and lost it and i created a new one and i can not update the iphoto app because it was updated with the old account, is there a solution for this problem?

i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

I can not update my installed apps from the App Store Update page. I can individually update from the App Store Purchased page. I tried a soft reset but still unable. Any suggestions?

I can not update my installed apps from the App Store Update page. I can individually update from the App Store Purchased page. I tried a soft reset but still unable. Any suggestions?

You are doing all that you cn do right now other than to update the apps in iTunes on your computer and sync them to the iPad.
There has been a problem with the App Store updates tab for a few days now and we are all waiting for Apple to fix it.
Look at all of the discussions on the iPad forum that are talking about this right now.

I downloaded an Adobe plug in and it will not update my computer even after a restart.

I downloaded an Adobe plug in and it will not update in my computer even after a restart. Any ideas?

to do an up-date you will need the original app. Then you can up-date

Update Failed - AAM will not update my CC apps

I have tried uninstalling, reinstalling, and just don't know what else to do. I've been trying to update my CC apps. It tells me everything is up to date which is not true at all. After Effects has a new update and it does not see it from the application itself or from CC desktop app. I've tried installing manualy and this is the error I get. PLease someone has to have seen this before. Help adobe, I don't know what to do. I just need my software to update!

I uninstalled and ran the adobe cleaner. Reinstalled my CC apps. It tells me it needs updates now. It fails with this error for all these apps.
Adobe CSXS Extensions 4
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Media Encoder CC 7.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Bridge CC 6.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Premiere Pro CC October 2013 (7.1) Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Photoshop 14.1.2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe After Effects CC (12.1) update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Photoshop Camera Raw 8.2(CC)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Dynamic Link Media Server 7.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210

I cant update all my apps, after i uploaded some photos to my mum's ipad. How do I change back to my ID. My iTunes refuses to update

I cant update all my apps. I can only update one by one. This happened after I uploaded some photos to my mum's iPad. Her apps are all updated by iCloud. Now her Apple ID keeps popping up and does not allow me to Update All. How do I change it back to my Apple ID

Hello there, jaygoh.
It seems you are having issues downloading an application from the App Store. To troubleshoot this issue, let’s follow the steps for iTunes Store connectivity:
First, try signing out of your account in Settings > iTunes & App Store. Once signed out, go ahead and restart your device. Once your device has restarted, sign back in to the iTunes Store and try to download the update.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
If the above did not resolve your issue, refer to the following:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Data not updated in business entity after change in architectural object

Hi,
A business entity was created from Architectural Object.
When we modify the address in the architectural object, the data is not updated in the business entity.
Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
Thx for your help.
Regards
Saad

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

BAPI_SALESORDER_CREATEFROMDAT2 is not updating the ITEM Qty after Free ITEM

Hi,
I am using BAPI_SALESORDER_CREATEFROMDAT2 to create a order.We have customization for populating a FREE ITEM for a Order ITEM.
Now the Problem is that .....if I am passing more then one Material as ITEM it is not updating the next ITEM Qty and also not populating FREE ITEM afterwords first one.
Please help me.
Regards
Ricky

Hi,
Find below the code :
read table i_table_t into lwa_table_s index 1.
if sy-subrc eq 0.
*Order Header
    lwa_ord_head_in-doc_type          = 'ZSO'.
    lwa_ord_head_in-sales_org         = '1000'.
    lwa_ord_head_in-distr_chan        = '10'.
    lwa_ord_head_in-division          = '10'.
    lwa_ord_head_in-req_date_h        = lwa_table_s-delivery.
*Order Header Update
    lwa_ord_head_inx-doc_type         = 'X'.
    lwa_ord_head_inx-sales_org        = 'X'.
    lwa_ord_head_inx-distr_chan       = 'X'.
    lwa_ord_head_inx-division         = 'X'.
    lwa_ord_head_inx-req_date_h       = 'X'.
    lwa_ord_partners-partn_role       = 'AG'.
    lwa_ord_partners-partn_numb       = lwa_table_s-sold_to.
    append lwa_ord_partners to lt_ord_partners.
    if lwa_table_s-ship_to is initial.
      lwa_ord_partners-partn_role     = 'WE'.
      lwa_ord_partners-partn_numb     = lwa_table_s-sold_to.
      append lwa_ord_partners to lt_ord_partners.
    else.
      lwa_ord_partners-partn_role     = 'WE'.
      lwa_ord_partners-partn_numb     = lwa_table_s-ship_to.
      append lwa_ord_partners to lt_ord_partners.
    endif.
    lt_table_it_t = lwa_table_s-zsd_table_it_t.
    loop at   lt_table_it_t into lwa_table_it_s.
      lwa_ord_items_in-material      = lwa_table_it_s-matnr.
      lwa_ord_items_in-plant         = wa_table_s-plant.
      lwa_ord_items_in-target_qty    = lwa_table_it_s-qty.
      lwa_ord_items_in-comp_quant    = lwa_table_it_s-qty.
      append lwa_ord_items_in to lt_ord_items_in.
      lwa_ord_items_inx-material     = 'X'.
      lwa_ord_items_inx-plant        = 'X'.
      lwa_ord_items_inx-target_qty   = 'X'.
      lwa_ord_items_inx-comp_quant   = 'X'.
      lwa_ord_items_inx-updateflag   = 'I'.
      append lwa_ord_items_inx to lt_ord_items_inx.
Schedule Line Information
      lwa_schedule_lines-sched_line = 'X'.
      lwa_schedule_lines-req_date    = lwa_table_s-date_del.
      lwa_schedule_lines-date_type   = '1'.
      lwa_schedule_lines-req_qty     = lwa_table_it_s-qty.
      append lwa_schedule_lines to lt_schedule_lines.
      lwa_schedule_lines_x-updateflag = 'I'.
      lwa_schedule_lines_x-sched_line = 'X'.
      lwa_schedule_lines_x-req_date   = 'X'.
      lwa_schedule_lines_x-date_type = 'X'.
      lwa_schedule_lines_x-req_qty    = 'X'.
      append lwa_schedule_lines_x to lt_schedule_lines_x.
    endloop.
Here I am getting First Item and it's free configured Item perfectly for the Qty 1.
But when I pass more then 1 Qty or Multiple ITEMS it is not populating other respective free configured ITEMS with them.Also IT is not updating the other ITEM Qty other the first one.
For Example:
Item No      ITEM            Qty           .......
10             ITEM1           1 EA        ..........
20             FREE1          1 DAY     ..........
30             ITEM2            0             ..........
40             ITEM3            0             .........
In above example After 30 and 40 two Free ITEM should be generated with 1 Day and for Qty 1 EA
Regards
Ricky

Days of the week not updating in weather app

Days of the week not updating in apple's weather app unless I delete city & reenter! Anyone else?

Thanks Phil,
I don’t know how it got messed up… Seems ok now, but this is how it looked like:
Language – English
Voice control – Английски
Keyboards 1 – Bulgaria ON
Region Format – Bulgarian

Delivery block not updated in sales order after released VKM3

Hi all,
I am facing below error
after released credit block throuh VKM3 also i am unable to delivery becasue it is not updated still block exist in sales order level.
i made all nacessary settings for that and also i tried through VKM1 but this tcode through error no poosible entries.
Thanks in advance
Srinivasa

hi,
check the following steps of assignment you did right or not
1)first check in t- code FD32 U assigned authorization person & each credit limit U shud assign
an authorization person along with credit limit
2) check - conditon records with KRML output is there or not
please read standard SAP config help as a check point doc.[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
Let me know if it is soling your issue...
rgards,
rajeev

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

TestStand not updating th description after using the edit substep

I've created numerous custom steps in TestStand. None of them will update the description after I use the edit substep and change some of that steps properties. As an example, I have the following step description...
str(Step.Channel.DeviceName)
After I use the edit substep, which changes step.Channel.DeviceName, the description does not update. However, if I then open the properties menu for that item and either select "OK" of "Cancel" to leave the property window, it then updates to the correct values. Placing down a new step will also force the description to update. While this is not functionally causing any problems, it would be nice if the descriptions updated immediatly.

Hey Dillon,
The reason it doesn't update is because the sequence editor doesn't know that the sequencefile has changed so it doesn't know to redraw that window. You can force it to redraw the window by calling the method IncChangeCount from the PropertyObjectFileClass. If you increment the change count it should automatically update the description as soon as your edit substep completes. Also a piece of advice, in the future if you have TestStand questions, you can probably get a quicker answer to them by posting on the TestStand forums, even if it is using the TestStand API in another programming environment like LabVIEW or CVI. Hope this helps!
Message Edited by Patrick P. on 12-06-2006 06:38 PM
Pat P.
Software Engineer
National Instruments

Folio producer not updating folios on app after publishing folios

Similar Messages

Maybe you are looking for