Folio size doesn't match asset size

Hello, I have another question.
I'm building an article with multiple pages, that's fairly asset heavy. There are seven pages, and each has an MSO with between 6-10 states, containing an almost full-page image in each state. We've reduced the size of each image to around 100KB, so each page should only weigh about 1MB. For some reason, when I'm building the folio, each page adds about 10MB to the folio size. The entire article ends up being almost 100MB! I was expecting it to be on the heavier size, but ten times what I expected was a bit of a shock!
I've recreated the page from scratch, relinked the images, and started a new folio, but each time the same thing happens. Is this jump in size simply because of the number of pages and large ammount of MSOs? It is the only reason I can come up with for having such a large jump in file size. If this is the problem, is there any way to fix it?
Thanks for any help!

Hello,
What is the purpose of all your multistates?
Are they image galleries? - if so try and use a HTML image swipe instead;
MSO's (especially full page MSO's) are notoriously weight heavy - for reasons that make no sense they seem to pile the weight on irrellevant of your asset size.
Very annoying, but I've never found a fix! Maybe someone on here has though, good luck!
Tim

Similar Messages

  • Frame size doesn't match

    I'm working on an animated project...doing the animation in Flash and then doing various effects and editing in Premiere Pro CS3.  I've been rendering my scenes out of flash as PNG sequences, and then bringing them into Premiere...and so far it seems to be working well for picture quality and what not, but I just noticed something weird.  I'm rendering frames from Flash with 1280x720 resolution...and in Premiere I'm working with a project size of 1280x720, so it should be a perfect fit, right?  But it doesn't seem to be.  If I render an image sequence from Premiere, the dimensions are fine, but if I render a video file it stretches the picture out horizontally for some reason, and also crops the left and right edges.  I also noticed that in Premiere if I choose 'scale to fit frame size' in the timeline than the image shrinks a bit and leaves a very narrow letterbox at the top and bottom...this solves the cropping issue when I export but the image is still inexplicable stretched...not to mention that if the clip size has the exact same dimensions as the frame size, 'scale to fit frame size' really shouldn't do anything at all.
    Anybody know what's going on here?  At the moment it doesn't have a big impact on my project but when I finish and want to render out watchable video it's gonna be a problem, so I might as well figure it out now before I go any further.
    thanks in advance

    Ya, all my footage is the same size, I actually made a template file that I open and resave whenever I start a new scene so that all my settings would
    be consistant...and my project settings match my export settings.  The monitor in Premiere shows it cropped as well, but it doesn't get stretched until I export it...and then like I said if I export a targa sequence or something it's not stretched or cropped.
    I'm not sure what you mean by par, thought.

  • Photo size doesn't match

    I recently bought 16GB iPad for work. According to iTunes, there's 1.04GBs of photos, which sounds about right as there's 2,733 photos. iTunes also says there's 8.6GBs of space left on the iPad.
    But on the iPad itself it says there's only 378MBs available!
    I had a similar problem between my MacBook and iPhone but not to this extent.
    How is this possible? And how do I sort it out.
    Thanks.

    Most Apps wil also take space for storage data!
    Here’s how to have a look at how much space each installed app is taking up on your iPad:
    – Go into the Settings app and tap on General on the left hand pane
    – Then tap on Usage on the right hand side – the third option down the page
    – Usage will show you how much space is currently available and how much is in use, and then list the ten apps currently using up the most storage space on your iPad (or other iOS device). At the end of the listing there’s a button to tap to show details for all apps.
    You can tap on each app to see details on the size of the app itself, and a separate area showing the amount of space being used by documents and data belonging to the app.

  • PDF Page Size does not match Canvas Size

    Hello,
    I'm using Xcelsius 2008 Engage SP1 on Vista 64bit with Office 2007 installed. When I'm exporting a Xcelsius file to PDF, the resulting Page Size of the PDF file is 8.5in x 11in. However, the Canvas size in Xcelsius is 800x600 (pixels). The resulting PDF file has quite a bit of whitespace in the top and bottom sections of the file.
    Is there anyway that I can export to PDF but with a file size that is in the same aspect ratio than the Canvas Size?
    Thanks for any input.
    Regards,
    Jon

    We regularly export to PDF and face this issue.  I believe that the adjustments need to be made in Acrobat as there is, from my understanding, no way to change the default export in Xcelsius.  You are probably already be doing this, but if not ... our solution has been, once you have exported your model into Acrobat, to simply rotate the page before saving the file.  At 800 x 600 you may still have some white space at the top and bottom of your model.  We typically use an Xcelsius canvas size of 1100 x 850.  When exported (and rotated in Acrobat) this gives a nice crisp image that also fills the page.  I hope this helps you.

  • To whom do I complain about the calendar on the iPad 2 with iOS 7? I can no longer read my appointments. Is there an adjustment I can make? Larger text size doesn't help.

    To whom do I complain about the OS 7 calendar on the iPad 2? I used to be able to read my appointments. The new small font is horrible. Text size doesn't seem to change it. Can I change it?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
     Cheers, Tom

  • Changing resolution and image size doesn't change result on screen?

    I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

    gradded,
    The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
    As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
    Hope this helps.

  • Paper detected does not match paper size or type selected

    Says paper mismatch! Paper detected does not match paper size or type selected. I have a 6600. Can some help?

    Hi,
    Try updating the printer firmware, the latest version should improve its paper handling.
    Follow these steps to get the latest update for the printer and then check for any differencex:
    http://support.hp.com/us-en/product/HP-Officejet-6​600-e-All-in-One-Printer---H711a/H711g/4322968/mod​...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I make address labels, preferably matching Avery sizes, in Pages please?

    How can I make address labels, preferably matching Avery sizes, in Pages please?  Please don't tell me there is no labels facility!!

    If you have your addresses set up in Address Book, the logical place for them, that is also the logical place to print them from.
    Pages will only use one data set per page, although there are ways around this. But then that wasn't your question.
    Peter

  • Hp pro 8600 error Paper detected does not match paper size or type selected .

    hp pro 8600 error "Paper detected does not match paper size or type selected" for Copies from tray one .  There has been no change in the paper always used in tray one.  Prints documents with no problem from Tray One with same paper.  Copies from Tray 2, same paper,  no problem.  Have restarted the printer, same error.   When I try to copy using Tray one, the to be copied document does not feed, and the printer kicks out a blank page using Tray One Paper.

    Hello marathonmama,
    Welcome to the HP Forums.
    I see that you are having an issue with a Paper Mismatch error on the printer.
    Please click the following link that deals with an HP Single-Function and Multifunction Printers - 'Paper Mismatch,' or 'Paper Size Mismatch' Error Mes....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • About:config tabs min size doesn't work

    about:config tabs min size doesn't work.

    The about:config settings for setting tab widths have been removed from Firefox 4, to set tab width you can use the Custom Tab Width extension - https://addons.mozilla.org/firefox/addon/custom-tab-width

  • My "Creative Cloud Files" folder in my computer doesn't match my "Assets/files" folder in the adobe website. How do I sinc the 2?

    My "Creative Cloud Files" folder in my computer doesn't match my "Assets/files" folder in the adobe website. How do I sinc the 2?

    Hi,
    Can you explain in more detail whats issues you are seeing exactly?.
    Thanks
    Warner

  • Brush preview size does not match brush stroke

    The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
    Does anyone have a solution for this problem?
    *I use a wacom tablet.

    Is your system cursor size set to something other than normal?
    under Apple, System Preferences, Universal Access.

  • 'Margins Do Not Match Page Size' Excel 2011 problem - nothing working now. Mac 10.9.2

    Hey folks. PLEASE help. I'm running Mac 10.9.2 with Excel 2011 on a macbook pro. All of a sudden i'm getting an error 'Margins Do Not Match Page Size' on Excel as soon as i start doing anything e.g. adjust page size, try to print. Help?
    Ive seen previous questions on this but nothing recent and none of the solutions seem to fit.
    Any ideas?
    Tahnks

    Kernel Panics today:
    Kernel Extensions in backtrace:
             com.apple.filesystems.smbfs(2.0.2)[E043DE0F-9336-3C61-9C82-F029B430A3EB]@0xffff ff7fabb77000->0xffffff7fabbc2fff
                dependency: com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7fa bb2b000
                dependency: com.apple.kext.triggers(1.0)[A7018A2E-1C0C-37B8-9382-67786A396EAF]@0xffffff7fab b72000
    Kernel Extensions in backtrace:
             com.apple.filesystems.smbfs(2.0.2)[E043DE0F-9336-3C61-9C82-F029B430A3EB]@0xffff ff7f85e2c000->0xffffff7f85e77fff
                dependency: com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7f8 3f2b000
                dependency: com.apple.kext.triggers(1.0)[A7018A2E-1C0C-37B8-9382-67786A396EAF]@0xffffff7f83 f72000
    BSD process name corresponding to current thread: Finder
    Mac OS version:
    13E28

  • I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!

    I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!
    also regular download doesn't show my any thing !! and I can not even resume my files ....
    i know these are direct links and i should be able to resume my downloads any time ( i have this option before )

    If an extension isn't working properly then you need to take this up with its developer.
    *http://www.downthemall.net/

  • PhotoSmart3210 All in one "Paper detected does not match paper size or type selected."

    All of a sudden i cannot copy any document with my 3210 All In One.  I keep getting the message shown above on the screen.

    Hi @nunzio317 
    I would like to help you with your Photosmart 3210. I understand that when you copy you see a message on the printer that says "Paper detected does not match paper size or type selected". Does this also happen when you print from the computer, or only when you copy? Have you tried copying a different size paper, and what size paper are you currently using?
    Are you able to print a self test report? If you are unsure, please try, and let me know;
    Load plain white paper into the tray.
    Press the Setup button.
    Press 1 to display the Print Report menu.
    Press 1 again to select Self-Test Report. The self-test report prints.
    - Source
    If this also happens when you print from the computer, please use the following document as it can help you to resolve the issue; 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
    I hope this helps.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for