Follow on doc(PREQ) not created in teh backend

Hi All,
Need some urgent help...We are runnin on SRM 5.0 n the Classic scneario....
When we order the SC,The backend doc is not created..In the follow on documents...we just get the status as Approved....The workflow is in status completed....Also when I try to execute the functions BBP_REQREQ_TRANSFER and BBP_PD_SC_TRANSFER..Also in BBP_PD tcode...I am getting the final status as i1113--Follow On document created.I get a short DUMP.....I have got a note (859891),...But not sure whether this will solve the problem.....Can anyon please guide me on this????
Regards,
Disha

Disha,
Oki, RFC target is correct now. Check again transaction ST22, SM21 and SM13 in SRM and R/3.
If answers help please don't forget points.
Bertrand

Similar Messages

Processing not possible; follow-on docs do not permit posting - WM

Dear All,
The transaction WAE03, while doing the posting of waste material the following error occured "Processing not possible; follow-on docs do not permit posting"
Please help me out.
regards,
ravi

Hi ravikk,
I suppose you are modifying an entry document, this entry document has a document category (SPRO Environment, Health and Safety ->Waste management -> Disposal Processing -> Basic Settings for Disposal Processing -> Specify Document Categories -> Document Category/Functions Assignment), the document category may have assigned a status profile (the default for waste disposal management is EHS_WMM1).
With the status profile (SPRO - Environmental, Health & Safety -> Waste Management -> Disposal Processing -> Basic Settings for Disposal Processing -> Status Management -> Check, Extend, Set Status Profiles) you can see that has several status number, do double-click in any of these numbers and you will see other screen (Transaction Control), here you see what are you allowed or forbidden when your entry document has this status. You can see the avaliable trnsaction with the menu (Environment ->Transactions), waste management transactions starts with WA* and its description with WA-PRO:.
Back to the initial screen if you push the button 'Object Types' you go to 'Allowed Type Objects' the checkbox 'Waste Quantity' must be checked.
Check this link for more info about system status and user status link
Regards
JCD
Edited by: Juan Carlos Delgado Peña on Mar 5, 2012 3:20 PM

PO not created in the backend for SC

Hi,
I am using SRM 5.0 and i created a shopping cart.. The shopping cart is ordered sccessflly but a PO is not created in the backend system.
I have made the follwing setting.
The backend system definition seems fine.
I have also defined the prodct category and the target system.
Number ranges are assigned in the SRM system.
I checked rz20 and did not find any errors there..
Shold i created a docment type EC in the backend MM system??
What else could i be missing. Please advise.

Hi,
You could check the return of FM B31I_INTERPRETE_DATA, which is called when a follow-on document is created in backend system.
Try to debug the shopping cart transfer, as specified in note 1173815. Perhaps the backend return message can be helpful.
Kind regards,
Ricardo

SD Billing doc was not created

Hi,
we have a sales document and the status of order is completed.But the invoice hasn't created.It shows Account determination error.It is not creating the Acc doc.
what could be the possibilities??
Krish.

1.One more reason could be the posting period is closed. In that case you need to go to the header details of the billing and change the billing date to the current month's date if the earlier date is not of the current month.
2.There might be a posting blocknin the billing documents type.
3.try to release it in accounting via change mode through flag.
4.Check the exchange rate table and the country settings to see if the country you are processing is assigned to 'M'.
5. try transaction code VFX3 and see the details if is FICO related.

Account Doc is not created

Hi,
The original credit memo document 96873997, was cancelled because the wrong part number was entered on the order. They reversed the Goods Issue and deleted the delivery and deleted the ZO. Now what has happened is accounting can not clear document 97043152 (new one)
When I go in VFO3 and enter the new number it says "acc doc has not yet been created"
How should I clear this doc.

Hi Dave,
Thanks for replying to my query...have assigned points to you.
I had tried that thing before but still was getting the error. However, the doc was stuck in batch processing and was atuomaticall created and cleard today
Thanks again

FI Doc does not create CO Document in destination system

We have implemented CFM on ECC6 which is posting a FI Doc to a destination FI System which is on 4.7. The FI document gets created successfully but the CO Document is not created. CO and PCA is active in the Destination system.
Can anyone please tell me what can be the reason of the same.
FI IDoc FIDCC1, FIDCCH, CODCMT posted to Destination System.

Hi,
look here http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a620b507d11d18ee90000e8366fc2/frameset.htm
and oss note 114814
hope that helps
Andreas

At the time of GR in S.T.O(stock Transfer) - Accouting Doc is not creating

Hi Friends,
We have one company code and 1 plant and now we created new plant no 2 in same company code.
When we are going to transfer Plant to plant thro Stock transfer Order (S.T.O) thro Transaction code ME21N.
We Issue material from plant 1 to plant 2,
When we receive Material in Plant 2 the accounting Document is not creating in 2 Sept S.T.O Procedure.
But my user wants Accounting document should be create at GR time at Plant 2.
Can u pls help me how to fix that..
Thanks,
M.

Accounting document gets generated when you issue goods (PGI)from Plant1 to Plan2.Separatly accounting document will not generate at the time GR (receiving)

Accounting doc is not create?

Hello cham's,
After creating the billing document it was not posted into finance and the system is showing accounting document is not created. How to procede to resolve this error will anyone share your expertise?.

Hello,
There could be many issues whch prevents the creation of accounting document from a billing document. The best way is to Release the Billing document to accounting (VF02 --> Invoice Number --> click the Green Flag on top right). Now the system will give you the exact error, please analyse the same and let us know the error message.
Prase

Program or FM triggered when creating follow on doc after approval

Dear All,
I am unable to debug the steps between approval of doc and creation of follow on doc. My problem is that when creating the follow on purchase order doc from SC, system is entering junk value for CZECH name (Non English user). I am unable to stop or debug as the follow on doc is getting created autometically. Please suggest.
Best wishes,
Atanu

Hi,
You do the following checks & let me know the result:
1. Go to SC BBP_PD item data and check the PO number. Whether it is created?
2. Use tocde RZ20 for any error in SC or PO.
3. You must see the error in Application monitor SC or PO web page with detail error.
4. Execute transaction SE37 and enter the FM BBP_REQREQ_RESUBMIT and then give the shopping cart number in REQNO field and then execute.
Function Module should work considering the shopping cart is in approved status and in the Follow on documents the status says Approved and in transfer process.
5.Also check whether the jobs CLEAN_REQREQ_UP and BBP_GET_STATUS_2 are working fine?
Regards,
yaniVy
reward if helps

Follow on doc missing from SC

Hi there,
SRM 5.0, SP10, Extended classic scenario,
Facing the problem after SP upgrade only.
Shopping carts exist that have already been ordered and approved and that have status "Follow-on document created" However, the follow-on documents are missing from the object links and therefore, the system does not display any documents in the shopping cart history.
meaning in follow on doc of the SC history is missing. *This is happenign for deleted lines of the PO
only*
Steps 1. SC created -- apprved ---PO created --- follow on doc of SC shows PO
Step 2 one line item of PO deleted --- PO approved --- SC follow on Doc is not shpwong PO as 'delted'
which was showing earlier before Support pack upgrade to 10
In the items, status I1111 ("Item in transfer process") is active, and I1113 ("Follow-on document created) is also active.
Anybody faced this problem please suggest the solution.
Regards

Hi Suren,
The note is quite old and it talks about SRM 3 and 4, interstingly I have fond another note which is exactly the same as the problem we are facing 949162 but as the note is released on june 07 and does not specified any SP and we are facing this problem after Sp upgrade to 10 I am bit reluctant to put in system.
Anybody on SP 10 has faced this problem before??
regards

SRM: Create Contact Person Could not create user; contact your system admin

Hi All,
First, I am not sure this question should be posted here, or SRM General. From my point of view, here is more suitable.
Our Problem:
Activity "Create Contact Person With Reference" error with message:
Step to reproduce:
1. Login to SRM JAVA as super administrator
2. Open tab "SRM Administration"
3. Using the current query, search for Business-Partner no: 30000725
4. Press "Create Contact Person with Reference"
5. Fill all required fields, tick "Is contact person" checkbox
6. Put: /SAPSRM/SUPPLIER as Role
7. Save
The following Message appear:
Could not create user; contact your system administrator
SPML Service error: Error reading request status. Display Help
Contact Person 2000000214 Created Successfully for BP 30000725 Display Help
E-mail was sent
The first error is intriguing. The username & password is created successfully in ABAP System (Our UME is in ABAP).
QUESTIONS:
1. What cause this problem? How to trace the error?
2. We want the user have portal role automatically. How to achieve that?
Thank you for any responses and helps.
SRM ABAP Version:
SRM_PLUS     700     0009     SAPKIBK209     SRM_PLUS for mySAP SRM
SRM_SERVER     700     0009     SAPKIBKV09     SRM_SERVER
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SRM JAVA Version:
SRM JAVA: Release 7 SP Level 9.0
BP SRM: Release 7 SP Level 9.0
Edited by: Nur Agus Suryoko on Mar 11, 2011 11:36 AM
Version information added

Hi Fernando,
Can you please tell me how you resolved this issue ??
Regards,
Adren

From DRFOUT not able to replicate the material, I-doc is not triggering

Hello Experts,
I am implementing SAP MDG for Material. I have done all the required confiration for Data replication as per the standard configuration document.
I want to replicate to another SAP system from SAP MDG hub.I have created the Data replication model and all the required configuration for maintain logical system, Distribution and generated partner profile with the necessary message types. But when I am executing DRFOUT no i-doc is generated even though it found material successfully depending on the filter criteria.
From BD10 I am able to replicate the Material and I-doc has been gererated and I can see from WE02 that the i-doc has been sent successfully.
Please help me out to get the answer why the i-doc is not creating while I am executing DRFOUT.
Regards,
Soumya De

Hi Soumya,
It is important that you complete the config and setup the technical settings for business systems in both the sending and receiving systems. Config :Masterdata Governance - General Settings - Data Replication - Define custom settings for data replication - Define Technical settings - Define Technical settings for business systems.
The business system, Logical system and RFC destination must be the same value in all of the 3 fields and must have at least the same entry for the 3 fields with the sending system as well as an entry for the receiving system. Please note both systems should have the same entries to be a sending and receiving system. Make sure you complete the second part of the config for your BO types.
So what we did, we added all systems in our config client and transported it to all our other clients.
Hope this will help you
Regards
Riaan

Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

Hi ,
I am getting the below error:
Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
Regards
Anumit

Anumit,
when will you get this error?
if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
if it doesnot work
try to reimport the certificate or restart the server
Thanks
Bala Duvvuri

F110 _ Payment document not created

Hi
In the payment run in f110 the system shows the following error - Payment document not created . the amount is shown in the proposal list. while payment run has been carried out for the particular vendorsystem shows the error. for other vendors it shows coirrectly. please advice why this error comes.
With regards
Balaji

Hi,
First check certain customization:-
(1) FBZP setup for payment method at country level. Whether IDOC generation program is assigned or not.
(2) Then check the variant of RFFOEDI1 in the printout tab of F110. Is the selection creteria OK?
(3) Check the partner profile in WE20 for the bank.
Then run the program RFFOEDI1 in SE38 for your payment run and check the output.
You can also get this program debugged from you ABAPer to have root cause analysis.
Regards,
Gaurav

Unit not created in language EN

Hello,
When loading a flat file, I receive the following error:
Error in conversion exit
CONVERSION_EXIT_CUNIT_INPUT
So then I checked the units of measure in my flat file against the T006A table via SE16 in BW. When I looked up some of the units of measure, I get the following error:
Unit is not created in language EN.
Question: How do I create the unit of measure in language EN?
Thanks,
George

Neither of the suggested solutions worked.
I ran RSDMD_CHECKPRG_ALL from se38 for 0BASE_UOM and 0UNIT.
I also removed CUNIT from the column CONVE which is next to the UNIT column.
I am still receiving the same errors as before.
Any other suggestions?

Follow on doc(PREQ) not created in teh backend

Similar Messages

Maybe you are looking for