Follow Up Detail - Fields are ready only

Hi All experts,
In 5.0 IC webclient, when I click the link to create Follow-Up for IR, all the fields
show as ready-only. I will have to save this follow-up and then all the fields become editable. I notice that in the html, the disable logic is determined by object->get_i_attr( ). I step into the method and could not figure out.
My question is: what is this get_i_method( ) eventually doing? Is there any
customiztion to make the objects editable etc.?
Any help would be appreciated...
Thanks,
Bin

Hi All,
Any input on this?
Thanks,
Bin

Similar Messages

  • Can we make the excel sheet fields are ready only after downloding

    Hi ALL
              I have the probelm in the project that when i downlaod the data into excel sheet in that sheet 2 fields should be read only,ie client can't edit those fields.
    can any one tel me how can do this one
    Thnaks
    Lokesh.V

    Hi,
    Could u explain the problem in some more brief ie., how u r downloaded the data ie., through open hub infospoke or just saved as a local file.
    Regards
    Ramakrishna Kamurthy

  • Address fields are ouput only

    Hi,
    In our IC webclient, when we enter a business partner, if nothing is entered in the address fields it creates ok but when we come back to change the partner again, the address fields are output only, so we can't enter anything in them. If we do enter address details when we create the partner, they are available ok for changing at a later date.
    Can anyone offer any advice on how we solve this, bearing in mind I'm completely new to BSP's and the IC Webclient.
    thanks,
    Malcolm.

    you may get a quicker response in CRM forum for this
    SAP CRM: Interaction Center
    Raja

  • Drop Column Field and Drop Row Fields in the Details Field area in the Cube Browser of BIDS/SSDT 2012

    Hello. When I right click a cube in the solution explorer and click browse, I am presented with a Details field area which doesn't have "Drop Row Fields" area like in BIDS 2008, and doesn't have "Drop Column Fields" area like in BIDS. It just has one details
    area with the message "Drag levels or measures here to add to the query".
    How do I include the  "Drop Row Fields" area and the  "Drop Column Fields" area in this Details area so it can be like 2008? 

    I am using MDX query to build SSRS report.
    How do i get MDX query from Excel ?
    Hi Vishal,
    We can use "OLAP PivotTable Extension" to get MDX query in Excel, please download it from:
    http://olappivottableextend.codeplex.com/
    In addition, I would suggest you open a new case if you have any more questiosn.
    Regards,
    Elvis Long
    TechNet Community Support

  • Multi Language- Picklist fields are displayed only one language for Reports

    Hi!
    I am working on Siebel On Demand with Multi Language (English and Spanish) and it works well for web interface, the automatic translation for picklist works properly.
    However when I create any report (with any Record Type) the fields setup with picklist are displayed only in spanish language even though I am on English mode.
    Have you any reference(s) or previous experience(s) on that?
    Thanks in advance
    Mtb

    Hi,
    in reports the language of the picklists corresponds always to the company default language.
    The only solution I now (its really static and not so nice):
    Create one report per language and change the picklist field by using CASE statements...you see its hard to refresh if you have lots of values :)
    cheers
    Myriam

  • User Defined Fields are read-only for a specific user

    I have a user that has lost her ability to edit user defined fields.  They are all grayed-out for all UDFs, all document types.  Other users have access to these fields.  I've even copied the authorizations from a user not experiencing the problem, but with no positive results.  Anyone have any thoughts on this?
    We are on SBO 8.8 PL 16

    Hi Randy......
    This might be the Authorisation issue......
    Please check properly whether you have given Full authorisation for Form Setting to such user or not and check by enabling it through Form Setting
    Regards,
    Rahul

  • Unable to enter Acquisition & Accu Dep values in AS91 since fields are grey

    Hi Friends,
    I am not able to enter the acquisition & accumulated values in AS91 as the fields are disabled.My capitalization date i am entering is 01.01.09 which is prior to transfer date.I have done the following to ensure entry via t code AS91.
    1. Set Co. Code Status - 1
    3. Set Transfer Date: 31.03.09 (Since the Go-Live Date is 01.04.09)
    4. Set Last posted period: 3 (FY: is Jan to Dec)
    5. Specify the net book value - Blank
    6. Have done AJAB ( though not required for FY 2008)
    7. Have changed the FY - AJRW
    In Screen layout OA77 & OA78 i could not find fields for Acquisition values & Accu Dep to check whether they are suppressed.
    I tried to see the earlier threads on this issue bu did not succeed.Have i missed out anything ?Please let me know.
    Thanks
    Sunil

    Hi,
    I have just tested your scenario and get your error same like you but why, I think so you gave the capitalization date 31-03-09 (this is date is set for transfer date), fields are display. If you give capitalization date of previous year, itu2019s working perfectly fine. And this is standard practice.
    So you need to upload data of pervious year only by AS91. Not for your current fiscal year capitalization and for this use normal by AS01 (For large data create upload LSMW).
    I hope if you gave the capitalization date of pervious year you will see fields are ready for input.
    Please inform me if its work or not.
    Regards
    Javed

  • Field not ready for input

    Hi All,
    I am trying to upload few materials using 'MATERIAL_MAINTAIN_DARK' FM.
    But I am getting few warning messages as shown below.
    The field MBEW-VJVPR is not ready for input and was therefore not transferred
    The field MBEW-VMVPR is not ready for input and was therefore not transferred
    The field MBEW-ZPLP1 is not ready for input and was therefore not initialized
    Can someone please let me know the reason for the above warning messages?
    Thanks and Regards,
    Sachin M M

    Please check thru MM01 whether these fields are display only or can be input enabled ?
    a®

  • Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

    Hello,
    This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
    While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
    All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
    I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
    But these are not working for compnay code & sales area data.
    please let me know if anyone has faced this type of problem / found any solution on this.
    Best Regards,
    Shubhada

    SAP IMG  -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
    This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
    Suggested Values:
    Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
    Source Object: BP | Target Object: VENDOR | Active Indicator : X
    Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
    Source Object: VENDOR | Target Object: BP | Active Indicator : X
    Have you set all of the above settings??
    BHARATH

  • Data carrier & application field are not getting displayed in CV04N

    Hi Guru's
    In TCode : CV04N,  data carrier & application field are not getting displayed.
    While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
    Let me know is there any configuration that has been missed out.
    Regards
    Bhanu

    Hi Bhanu,
    Please note that the fields 'Data carrier' & 'Application field'  are visible only if no document type is entered.
    Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
    Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
    Regards,
    Pradeepkumar Haragoldavar

  • Fields for creation of BP in cProjects front-end are read-only

    Hi everyone,
    I'm a beginner in SAP-Development/Customizing so I hope this question isn't too easy
    I can't create a Business Partner using the cProjects front-end (Ressources > Staffing) because the necessary fields and buttons are read-only... (> web-Dynpro Component: DPR_ROL_STAFF; View-Info: VI_SEARCH_CREATE)
    I'm using CPRXRPM 450_700 patch 0006
    The field-control is standard-SAP (0SAP).
    My user-account has all cProject-roles + SAP-ALL
    I assume i can change the behaviour of these fields in the Field Control but I can't identify which is the corresponding Object Category to apply the changes.
    - Is there a documentation which field belongs to which Object Category in Field Control?
    - Or can somebody tell me a procedure to find it out on my own?
    Thanks in advance

    Hi,
    generally it is recommended to use transaction BP or ALE distribution to get the business partner be created.
    If you would like to create the BP in web UI directly, the user must have the Structural Authorization, see customizing path:
    Collaboration Projects -> Resource Management -> Organizational Management.
    It is very HR related topic, you may contact a HR consultant to know more details about it.
    Kind regard,
    Zhenbo

  • "The selected cells are read-only" error on Custom Field when trying to insert in Datasheet mode

    I have a custom field that works completely fine. Yesterday our QA team found out that when trying to insert in Datasheet format, the error "The selected cells are read-only" was thrown. Any ideas? I tried passing the following property to my fldtypes_field.xml file:
        <Field Name="ReadOnly">FALSE</Field>
    No luck.Victor Palma

    Unfortunately it did not work. I also developed the code and access the field and checked its property called "ReadOnlyField"  which is already set to false.
    Below is the xml that i am using. Can you please share the xml that you had used?
    <?xml version="1.0" encoding="utf-8"?>
    <FieldTypes>
      <FieldType>
        <Field Name="TypeName">MyCustomField</Field>
        <Field Name="ParentType">Text</Field>
        <Field Name="TypeDisplayName"> My Custom Field</Field>
        <Field Name="TypeShortDescription"> My Custom Field</Field>
        <Field Name="AllowBaseTypeRendering">True</Field>
        <Field Name="ReadOnlyField">False</Field>
        <Field Name="UserCreatable">TRUE</Field>
        <Field Name="ShowInListCreate">TRUE</Field>
        <Field Name="ShowInSurveyCreate">TRUE</Field>
        <Field Name="ShowInDocumentLibraryCreate">TRUE</Field>
        <Field Name="ShowInColumnTemplateCreate">TRUE</Field>
        <Field Name="FieldTypeClass">My Assembly Information goes here</Field>
      </FieldType>
    </FieldTypes>

  • How to make pricing field as output only in sales order header and item lev

    Hi ,
    I want to make the field PRICING DATE as output only both at header and item level. How can i do pls guide me in detail.
    Regards
    Sunaina

    Hi Sunaina ,
    Through User Exit you get this requirement plese take help of ABAPer to activate the user exit according to your requirement.
    Try With this User Exit
    Program MV45AFZZ
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    I hope it will help you,
    Regards,
    Murali.

  • Not all fields are getting updated in transformation

    Dear all,
    Please help me in the following issue:
    I have the following scenario:
    DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
    Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
    The fields exist in DSO 1 but don't go into cube.
    I did the following:
    1. deleted transformation and dtp, recreate = > not working
    2. copied the cube, and create new transformation and DTP...not working.
    Any help would be appreciated
    Thank you
    Ramona

    Hi Ramona,
    Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
    Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
    Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
    Cheers,
    CK

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

Maybe you are looking for

  • Output the requested delivery date for each different line item

    Hello Experts I have program called ZFSFSF(following), in the output Its showing multiple requested delvery dates per line item. But We need to show the requested delivery date for each different line item. Any code is highly appreciated. I wud appre

  • Is there any way to have a smart mailbox search sub-folders

    My wife uses Mail.app for her business in which gets hundreds of emails a day and managing them all is quite a challenge. One important goal of e-mail management is archiving certain emails in folders (and sub-folders) without creating duplicates.  W

  • Co-Product Lot creation at the time of Process order release.

    Hello All,       I want to map a scenario such that: Whenever a order for material is RELEASED it should generate a LOT for say MAIN product ,CO-PRODUCT & BY-PRODUCT(in shrt also for its BOM). Thanks.

  • What (the hell) is SQL Exception called Function sequence error?

    ...doing in a code like this: ResultSet friends=...executeQuery... while (friends.next()) log.append(friends.getString("sendergsm")); somewhere in between that loop, or sometimes the loop runs out fine, and sometimes it throws SQLException called Gen

  • Business Process Analytics - Analysis Section

    Hi, I have configured multiple Solutions as part of Business Process Monitoring and all of pre-requisites has been taken care for performing Business Process Analytics. We do select the "Solution for analysis" (under Key Figure Context) After applyin