Follow up in IC Agent

HI experts,
I have a requirement where i need to create a follow up of business activity in IC agent  ( BZ ROLE : UTIL_IC ). I have developed objects and even getting correct follow up transaction in pop up. When I select the follwo up from POP UP , it should open the view of transaction selected. But nothing is happening on selection.
Can anyone suggest.
Thank you.
Regards,
Vishal

Hi ,
I solved it myself.
Thank you.
Regards,
Vishal

Similar Messages

  • Follow Up Actions - Reporting Agent

    Hi BW Gurus,
    I would like to know what are following up action is available in Reporting Agent
    Thank You

    Hi Luis,
    There are 4 steps.
    1) Send Mail- alerts user by e-mail; for example you can send e-mail saying sales qty target were missed
    2) Alert Monitor entry - view results in the alert monitor; you can also give an URL for the alert monitor
    3) Export - Send Data to a work flow for follow up action
    4) RRI Interface - if an exception happens you can jump to another query for a more detailed display using Go To option
    TQ
    Kumar

  • Currently we are receving following Error in Our Agent PG ControlFailureConf:13043:IPCC Error [13043]Your request to clear failed.

    Hi,
    Currently i am getting following error in CG process  ControlFailureConf:13043:IPCC Error [13043]Your request to clear failed.
    Kindly advice

    Hi,
    With the error code provided
    13043 PERERR_GW_E_THREADCLEARCALL_UNKNOWN_CALLID
    1st Level Text = 'JTAPI Gateway - Error on CLEAR CALL operation - Unknown
      Call ID'
    http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_tech_note09186a00800e1524.shtml
    Do you see any errors on PG?
    As this is for the Clear Call Operation, do you see it for all the calls?
    I would recommend to cycle the PG process and check for the errors
    You can also refer to the below link
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ctios/cti_server_reference/programming/guide/CTI_Svr_Msg_Ref_Gde_Prot_15.pdf
    Page No:207 to check for the error mesages
    Thanks,
    Dass
    Please rate if this post is useful

  • Three agent UR versions gets installed from gateway - SCOM 2012 SP1 UR4

    Hi,
    We have a SCOM 2012 SP1 UR4 installation with several gateways that servers connect to and get installation from.
    We noticed that when the agent get installed on a client server it gets first the agent itself, then UR1, UR2 and last UR4.
    From the XML-section in the task that has installed the agent one can read the following:
    SoftwareUpdateInstalled KB2784734-amd64-Agent.msp;KB2826664-amd64-Agent.msp;KB2880799-amd64-Agent.msp; SoftwareUpdateInstalled
    Below is from the application log of a newly installed server that got the agent installed.
    The question I have is if this is correct? Why are all three UR installed?
    Shouldn't it be enough with the latest version of UR? Are they not cumulative?
    Can I simply delete the older versions in the agent directory of the Gateway?
    Regards S-E
    Windows Installer installed the product. Product Name: System Center 2012 - Operations Manager Agent.
    Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
    Installation success or error status: 0.
    Windows Installer installed an update. Product Name: System Center 2012 - Operations Manager Agent.
    Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
    Update Name: System Center 2012 - Operations Manager SP1 UR1 Update Patch.
    Installation success or error status: 0.
    Windows Installer installed an update. Product Name: System Center 2012 - Operations Manager Agent.
    Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
    Update Name: System Center 2012 - Operations Manager SP1 UR2 Update Patch.
    Installation success or error status: 0.
    Windows Installer installed an update. Product Name: System Center 2012 - Operations Manager Agent.
    Product Version: 7.0.9538.0. Product Language: 0. Manufacturer: Microsoft Corporation.
    Update Name: System Center 2012 - Operations Manager SP1 UR4 Update Patch.
    Installation success or error status: 0.
    Windows Installer installed the product. Product Name: Active Directory Management Pack Helper Object.
    Product Version: 1.1.0. Product Language: 1033. Manufacturer: Microsoft Corporation.
    Installation success or error status: 0.

    Hi,
    This should be normal, as we can see in the below two articles. When applying Update Rollup 2, UR1 is listed there, and when applying Update Rollup 3, UR1 and UR2 is listed there also.
    http://blogs.technet.com/b/kevinholman/archive/2013/04/11/applying-update-rollup-2-ur2-to-opsmgr-2012-sp1.aspx
    http://blogs.technet.com/b/kevinholman/archive/2013/09/27/applying-update-rollup-3-ur3-to-opsmgr-2012-sp1.aspx
    For example, UR3 can be applied to System Center Operations Manager 2012 SP1 (as released) or a SCOM 2012 SP1 deployment that has had UR1 or UR2 already applied.
    Regards,
    Yan Li
    Regards, Yan Li

  • Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

    Hi Community,
    I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment,  we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
    VMware machine running Windows Server 2008R2.
    The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
    ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
    Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
    Configuration
    Supported?
    Agent-less monitoring
    No
    After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
    each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
    but it didn't matter how many times I try the servers never show up.
    I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
    --> http://technet.microsoft.com/en-us/library/hh212853.aspx
    I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
    the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
    went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
    of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
    I went to the Event Viewer and I found one particular event that caught my attention, see below :
    Log Name:      Operations Manager
    Source:        Health Service Modules
    Date:          6/12/2014 12:48:19 PM
    Event ID:      11551
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      MyManagementServer
    Description:
    Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Health Service Modules" />
        <EventID Qualifiers="49152">11551</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
        <EventRecordID>1945680</EventRecordID>
        <Channel>Operations Manager</Channel>
        <Computer>MyManagementServer</Computer>
        <Security />
      </System>
      <EventData>
        <Data>MyManagementServe</Data>
        <Data>0x800706BA</Data>
        <Data>The RPC server is unavailable.</Data>
      </EventData>
    </Event>
    Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
    Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
    There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
    My main goal is to have all the servers showing up in the Operations Manager Console.
    So thanks all in advance !
    Oscar Loria

    So you can ping and nslookup from your ms to these agents and vice versa right?  I wouldn't do a manual install, I would push the agent from the management server.  You can uninstall the agent manually, or use cleanmom to get rid of them.  Then
    do an install from the console.  When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
    From Holmans post on this:
    e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    The MOM Server could not execute WMI Query "(null)” on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    8004100A 
    800706BA
    1.  Ensure agent push account has local admin rights 
    2.  Firewall is blocking NetBIOS access.  If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed.  We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.  
    3.  Inspect WMI service, health, and rebuild repository if necessary 
    4.  Firewall is blocking ICMP  (Live OneCare) 
    5.  DNS incorrect 
    http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error

    Hello,
    I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
    In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
    Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
    In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
    The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
    lf
    WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
    INFO: Creating new CFM connection
    INFO: Creating a new logger for oracle.sysman.top.agent
    INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
    INFO: Creating a new logger for OuiConfigVariables
    INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
    INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
    INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
    INFO: Successfully returning from CfmFactory.connect()
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 2 aggregate instances saved
    INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
    INFO: Framework waiting for Action to complete at 15:08:10.272
    INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
    WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
    WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
    INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
    INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
    INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
    INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
    INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
    1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
    2.AGENT_PORT=3872
    3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
    4.b_doDiscovery=false
    5.AGENT_BASE_DIR=/users/ncgf/em_agent
    6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
    7.s_hostname=nsn175-89.us.oracle.com
    8.OMS_HOST=nsn175-105.us.oracle.com
    9.b_startAgent=false
    10.b_secureAgent=true
    11.b_chainedInstall=false
    12.b_forceConfigure=false
    13.EM_UPLOAD_PORT=4904
    14.b_forceAgentDefaultPort=false
    15.s_staticPorts=
    16.PROPERTIES_FILE=
    b_skipValidation=false
    INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
    INFO: oracle.sysman.top.agent:Validating with http protocol ...
    INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
    SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
    INFO: oracle.sysman.top.agent:Validating with https protocol ...
    INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
    SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
    INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
    INFO: oracle.sysman.top.agent:Performing free port detection..
    INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
    INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
    INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
    INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
    INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
    1. state_dir=/users/ncgf/em_agent/agent_inst
    2. agentBaseDir=/users/ncgf/em_agent
    3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
    INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
    INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
    INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
    INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
    INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
    INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
    INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
    INFO: oracle.sysman.top.agent:Creating shared install...
    INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
    INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Secure Mode: No
    INFO: oracle.sysman.top.agent:DeployMode : agent
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:Creating directories...
    INFO: oracle.sysman.top.agent:Creating private.properties...
    INFO: oracle.sysman.top.agent:Creating blackouts.xml...
    INFO: oracle.sysman.top.agent:Creating targets.xml...
    INFO: oracle.sysman.top.agent:Creating emctl control program...
    INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
    INFO: oracle.sysman.top.agent:Agent will not be secured.
    INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
    INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is  missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
    INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
    INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
    SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
    1. Agent Registration Password was not passed.
    2. b_secureAgent was passed as false
    3. The flag -forceConfigure was assed from agentDeploy.sh
    INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
    INFO: oracle.sysman.top.agent:Plugin Homes found.
    INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
    INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
    INFO: oracle.sysman.top.agent:Plugin command completed with status=0
    INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:---------------------------------------------------------------
    INFO: oracle.sysman.top.agent:---------------------------------------------------------------
    SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
    SEVERE: oracle.sysman.top.agent:Agent configuration has failed
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
    INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 2 aggregate instances saved
    INFO: done waiting for Action from 15:08:10.272
    Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
    "Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
    Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output.  Also if you can open an SR with oracle support to track this issue and its resolution. "
    [ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
    Oracle Enterprise Manager 12c 3.
    Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
    The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
    Do you want to continue using this directory? [yes/no] yes
    Enter password
    Emcli setup successful
    [ncgf@nsn175-105 bin]$ ./emcli verify_updates
    Verifying updates. Starting validation...
    Type       : Plug-in
    Description: Demo Hostsample Test Plugin
    Attributes
            Version: 1201000100
            Revision: 0
            OS Platform: Generic Platform
            Plug-in Name: Demo Host Sample Plugin
    Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
    For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.

       Hello AkankshaSheoranKaler
    We have done the following, but we aren't able to resolve this issue. Thank you for your help!
    lf
    “This  happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
    On Enterprise Manager server [nsn175-105], we did the following:
    1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
    we start nfs service by executing command “service nfs start”.  
    On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
    On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
    After making this change, we ran agent deployment again. We encountered the same error as shown above.
    “You can fix the software library or you can download the agent bits in offline mode.”
    For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
    “Try downloading the bits again”
    We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
    (Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

  • Failed User Launch Agents

    New to Apple Support Community; sorry if posted in the wrong place or if done other dumb things...
    Don't know really what i have done wrong, but after my iMac (20-inch, Mid 2007) with OS X 10.10.2 and 4 GB 667 MHz DDR2 SDRAM got rather slow, i used EtreCheck and removed a number of red-coloured UserLaunchAgents and things seem to get better.
    With the following exceptions:
    User Launch Agents: ℹ️
        [failed]    [email protected] [Click for details]
        [failed]    [email protected].plist [Click for details]
        [failed]    com.apple.SafariBookmarksSyncer.plist [Click for details]
    Not sure what those items are doing, but i am under the impression that i'm going to need them to do better then shown.
    Unfortunately i don't have a clue how to achieve this and would appreciate help
    To complete relevant info, please find the entire Etrecheck report below
    EtreCheck version: 2.1.8 (120)
    Report generated 2 februari 2015 02/02 - 17:22
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (20-inch, Mid 2007) (Verified)
        iMac - model: iMac7,1
        1 2 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR2 SDRAM 667 MHz ok
            BANK 1/DIMM1
                2 GB DDR2 SDRAM 667 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI,RadeonHD2400 - VRAM: 128 MB
            iMac 1680 x 1050
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:44:5
    Disk Information: ℹ️
        ST3250820AS Q disk0 : (250,06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (106.01 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple, Inc. Keyboard Hub
            Primax Electronics Apple Optical USB Mouse
            Apple, Inc Apple Keyboard
        LaCie LaCie Device 500,11 GB
            EFI (disk1s1) <not mounted> : 210 MB
            Time Machine (disk1s2) /Volumes/Time Machine : 499.76 GB (321.90 GB free)
            Boot OS X (disk1s3) <not mounted> : 134 MB
        Apple Inc. Built-in iSight
        Apple Inc. iPhone
        Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
        /etc/hosts - Count: 2
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/Viscosity.app
        [not loaded]    com.viscosityvpn.Viscosity.tap (1.0) [Click for support]
        [not loaded]    com.viscosityvpn.Viscosity.tun (1.0) [Click for support]
            /Library/StartupItems/BRESINKx86Monitoring
        [not loaded]    com.bresink.driver.BRESINKx86Monitoring (9.0) [Click for support]
            /System/Library/Extensions
        [loaded]    com.delantis.kext.tcpblocknke (4.0.0 - SDK 10.8) [Click for support]
        [loaded]    virtualcdrw.driver (1.0 - SDK 10.7) [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.bresink.system.privilegedhelper-tts.plist [Click for support]
        [loaded]    com.bresink.system.securityagent3a.plist [Click for support]
        [loaded]    com.delantis.tcbblockd.plist [Click for support]
        [loaded]    com.delantis.tcbblocknke_load_kext.plist [Click for support]
        [running]    com.freemacsoft.appcleanerd.plist [Click for support]
        [loaded]    com.sparklabs.ViscosityHelper.plist [Click for support]
        [loaded]    com.timesoftware.timemachineeditor.helper.plist [Click for support]
        [running]    net.privatetunnel.ptcore.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    [email protected] [Click for details]
        [failed]    [email protected].plist [Click for details]
        [failed]    com.apple.SafariBookmarksSyncer.plist [Click for details]
        [loaded]    MailBackup.plist [Click for support]
    User Login Items: ℹ️
        TotalFinder    Programma  (/Applications/TotalFinder.app)
        AppCleaner Helper    Programma  (/Applications/AppCleaner.app/Contents/Library/LoginItems/AppCleaner Helper.app)
    Internet Plug-ins: ℹ️
        DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 3.3.3.1   - SDK 10.7 [Click for support]
        RealPlayer Plugin: Version: Unknown [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        Skyline TerraExplorer: Version: 1.0.28.0 [Click for support]
        Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0
        AdobePDFViewer: Version: 8.1.7 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Safari Extensions: ℹ️
        AdBlock
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        FUSE for OS X (OSXFUSE)  [Click for support]
        VOX Preferences  [Click for support]
        Widget Manager  [Click for support]
    Time Machine: ℹ️
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 143.18 GB
        Destinations:
            Time Machine [Local]
            Total size: 499.76 GB
            Total number of backups: 39
            Oldest backup: 2014-12-03 19:51:54 +0000
            Last backup: 2015-02-02 14:49:56 +0000
            Size of backup disk: Adequate
                Backup size 499.76 GB > (Disk used 143.18 GB X 3)
    Top Processes by CPU: ℹ️
             3%    WindowServer
             1%    backupd
             0%    Dropbox
             0%    AppleSpell
             0%    ocspd
    Top Processes by Memory: ℹ️
        279 MB    Safari
        180 MB    com.apple.WebKit.WebContent
        112 MB    Finder
        82 MB    mds_stores
        79 MB    CalendarAgent
    Virtual Memory Information: ℹ️
        56 MB    Free RAM
        1.70 GB    Active RAM
        1.63 GB    Inactive RAM
        563 MB    Wired RAM
        2.57 GB    Page-ins
        4 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 2, 2015, 03:35:24 PM    Self test - passed
        Jan 31, 2015, 02:25:23 PM    /Library/Logs/DiagnosticReports/MailSteward_2015-01-31-142523_[redacted].cpu_re source.diag [Click for details]
        Jan 31, 2015, 11:33:14 AM    /Library/Logs/DiagnosticReports/LegacyFileVaultMessageTracer_2015-01-31-113314_ [redacted].crash

    If any of you two has misgivings about my ideas, i would like to know.
    I think it might be wise to save your money and plan on a replacement Mac.  Even a low end Mac mini would out perform the iMac and Macbook.  But it is not my job to spend your money.
    If you can install Lion, it might be the better performance solution.  Should not cost you anything except time, and extend the usefulness of your Macs for awhile.
    If you really want to keep this hardware in service AND have newer software, then max'ing out the RAM and replacing the hard disk with an SSD is how you can get reasonable performance.  But RAM and an SSD are going to add up to money that could be better put into a new Mac.  And besides, "Real-Soon-Now" Apple is going to stop supporting those Mac models and then newer OS releases will not install on them.
    Again, I do not want to spend your money.
    (for your info: i'm still a noob, but the first computer i had to use for my work in 1968 was an IBM 360)
    Gee that is even before my first computer (a PDP-8 in '71; well there was the Burroughs Computer in the University basement where I submitted my card desks, and a printout came back; the PDP-8 belonged to the University too, but at least I got to touch it; That lead to a job a UNIVAC where I got to touch the UNIVAC equivalent of the IBM 360).

  • Cisco agent desktop - issue

    hello, we have an issue with two agents.
    when they open chat, all the time "Initializing" state, every 30 seconds, so active state every 30 seconds begins from 0, and new calls arrive to this agent
    what is could be?
    thank you

    Hi,
    When using CAD Chat window, I cannot see any other agent, although some are logged.
    I tried the following "telnet" commands :
    From agent to Chat server:         telnet 59000 ===> This works fine !
    From Chat server to agent:         telnet 59020  ====> Doesn't work
    From Agent to Agent :               telnet 127.0.0.1 59020                      ====> Doesn't work
    From Agent to Agent :               telnet 59020  ====> Doesn't work
    This seems like the listening port is not configured properly, but I don't where to check/define it ?
    Do you have any idea on this ?
    Thanks in advance,
    Regards,
    Romuald Grosse.

  • Linux Monitor Agent Web Console Preferences Won't Save!

    Have recently installed GW Monitor on a Linux box and all seems fine except for the following:
    Within the Monitor Agent Web Console I browse to menu items 'Preferences' and then select 'Setup' to view details on the 'HTTP Settings', 'SNMP Settings', 'HTTP Settings' etc.
    From here all my settings are configured correctly except the texboxes under the 'Notify' and 'HTTP Settings' headings refuse to save any details that are entered into them, even after clicking on the 'submit' button, bizarre!!?
    Any ideas would be really appreciated.
    Cheers, James

    jim-bob,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • ZLM Agent Install Fails - NOTHING_PROVIDES_DEP:

    Hi,
    I am trying to install the zlm agent (ZLM 7.3 IR2) on a SLES 11 box.
    I have extracted the ZLM Server ISO image files, and put it on an NFS server. The client box then mounts the NFS share and I run the command
    ./zlm-install -a -i
    Sometimes the installation goes through fine, but lately I am getting the following errors on the agent install
    Installing Component : ZENworks Agent
    Installing ZENworks Agent | | 0% NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
    NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
    DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    Install of ZENworks Agent failed.
    Install has not completed
    Here is the output from the log file
    26 Mar 2010 13:08:43 INFO Daemon Received signal SIGTERM
    26 Mar 2010 13:08:43 WARN ShutdownManager Preparing to shut down...
    26 Mar 2010 13:08:43 INFO UnixWebServer Unix server stopped
    26 Mar 2010 13:08:44 WARN ShutdownManager Shutting down daemon...
    26 Mar 2010 13:08:44 INFO Daemon Final RSS size is 25708 KB
    26 Mar 2010 13:08:51 INFO Daemon Starting ZMD version 7.3.2
    26 Mar 2010 13:08:51 INFO Daemon Using Mono 1.2.6
    26 Mar 2010 13:08:51 INFO WebCache Expiring cached files...
    26 Mar 2010 13:08:51 INFO KeyManager Loading key whitelist
    26 Mar 2010 13:08:51 INFO Daemon Loading trusted certificates...
    26 Mar 2010 13:08:51 WARN NetworkManagerModule Failed to connect to NetworkManager
    26 Mar 2010 13:08:51 INFO PackageManagementModule Using SAT backend
    26 Mar 2010 13:08:51 INFO RPMBackend Loading installed packages
    26 Mar 2010 13:08:51 INFO RPMBackend Finished loading installed packages
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'NetworkManager' - 'NetworkManager support'
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'Package Management' - 'Package Management module for Linux'
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'ZENworks Server' - 'SOAP methods used by a ZENworks server'
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'XML-RPC interface' - 'Export ZMD public interfaces over XML-RPC'
    26 Mar 2010 13:08:51 INFO ServiceManager Not loading existing services
    26 Mar 2010 13:08:51 WARN Daemon Not starting remote web server
    26 Mar 2010 13:08:51 INFO UnixWebServer Unix server listening for connections.
    26 Mar 2010 13:08:51 INFO DaemonHealth Current RSS size is 18740 KB
    26 Mar 2010 13:09:01 INFO ServiceManager Adding service: file:///mnt/data/packages/edir/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'edir'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/imaging/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'imaging'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/server/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'server'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/mono/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'mono'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/java/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'java'
    26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/sles-11-x86_64/sles-11-x86_64
    26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'sles-11-x86_64'
    26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/runtime-deps/sles-11-x86_64
    26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'runtime-deps'
    26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/client/sles-11-x86_64
    26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'client'
    26 Mar 2010 13:09:07 INFO Progress Progress.Stop Message: NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
    NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
    DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    Those packages deps are installed and I have a SLES 11 repo setup - which works.
    Thanks.

    Hi Rainer,
    Thanks for the response.
    I tried what you said:
    rpm -q --whatprovides /bin/sh
    bash-3.2-147.3
    Including the rebuild, but it didn't work.
    I doubt its an RPM problem, because I can install any other package.
    host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
    yast2-squid-2.17.10-1.32
    host-10-121-92-73:/mnt/agent # zypper in squid
    Loading repository data...
    Reading installed packages...
    Resolving package dependencies...
    The following NEW package is going to be installed:
    squid
    Overall download size: 1.3 M. After the operation, additional 4.4 M will be used.
    Continue? [YES/no]: yes
    Retrieving package squid-2.7.STABLE5-2.3.x86_64 (1/1), 1.3 M (4.4 M unpacked)
    Installing: squid-2.7.STABLE5-2.3 [done]
    Additional rpm output:
    Updating etc/sysconfig/squid...
    host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
    yast2-squid-2.17.10-1.32
    squid-2.7.STABLE5-2.3
    While I was writing this, I tried to install the agent again after that squid rpm install and it appears to be working now.
    It looks like the rebuild didn't do the trick, but install any new RPM sorts it out.
    Thank you very much for the help.

  • How do I turn off Sync Services Agent?

    I am trying to redownload my Office: mac 2011 to my Mac Book Pro. When I put in the Office: Mac 2011 disc it keeps telling me to quit the following applications-- Sync Services Agent. I have tried to "force quit" this app. but it continues to run. I need some help on this. Thanks!

    Hey everybody:
    I have the solution to this problem.
    I had installed Microsoft Office on my Mac at home recently, primarily to use Outlook on a day where I was working from home, and when I was done, I quit Outlook, but it was too late; the installation had left its residue. I got pop-up Windows which were related to Outlook telling me there were meetings, etc, so I wanted to find all running processes with "microsoft" somewhere in their path and to kill them off. These are the initial steps I took:
    Tue 10:14:15 {jsl@marlin:[~]} pwd
    /Users/jsl
    Tue 10:14:27 {jsl@marlin:[~]} ps -ef | egrep -i 'microsoft|PPID' | egrep -v egrep
      UID   PID  PPID   C STIME   TTY           TIME CMD
      501  6036   313   0 10:11AM ??         0:00.49 /Applications/Microsoft Office 2011/Office/Office365Service.app/Contents/MacOS/Office365Service
      501  6038   313   0 10:11AM ??         0:00.65 /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app/Contents/MacOS/Microsoft Database Daemon
      501  6039   313   0 10:11AM ??         0:00.45 /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent
    Tue 10:14:49 {jsl@marlin:[~]} kill 6036 6038 6039
    As you can see, I tried to kill off the 3 Microsoft-related processes, but when I went to double-check that I had actually gotten rid of them, I saw that 2 of them had come back:
    Tue 10:15:05 {jsl@marlin:[~]} ps -ef | egrep -i 'microsoft|PPID' | egrep -v egrep
      UID   PID  PPID   C STIME   TTY           TIME CMD
      501  6104   313   0 10:15AM ??         0:00.38 /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent
      501  6105   313   0 10:15AM ??         0:00.26 /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app/Contents/MacOS/Microsoft Database Daemon
    I kept trying to kill off various processes, but eventually I figured out that if I killed off every process except for the "SyncServicesAgent", I could at least keep the number of Microsoft-related processes to a minimum.  But the real question was how to kill off the SyncServicesAgent so that it would stay dead? I noticed that "kill -9" didn't work, because the prcoess was definitely dying, but something else was bringing it back to life, and that's what I needed to suss out.
    Let me just cut to the end, so that you, too, can know what steps to take. You want to kill off all "microsoft" processes except for "SyncServicesAgent" using "kill" on the command-line (in Terminal), and then use "launchctl" for the last step, as below:
    Tue 10:30:44 {jsl@marlin:[~]} ps -ef | egrep -i 'microsoft|PPID' | egrep -v egrep
      UID   PID  PPID   C STIME   TTY           TIME CMD
      501  6104   313   0 10:15AM ??         0:00.69 /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent
      501  6105   313   0 10:15AM ??         0:00.74 /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app/Contents/MacOS/Microsoft Database Daemon
      501  6158   313   0 10:30AM ??         0:00.41 /Applications/Microsoft Office 2011/Office/Office365Service.app/Contents/MacOS/Office365Service
    Tue 10:31:09 {jsl@marlin:[~]} kill 6105 6158
    Tue 10:31:24 {jsl@marlin:[~]} ps -ef | egrep -i 'microsoft|PPID' | egrep -v egrep
      UID   PID  PPID   C STIME   TTY           TIME CMD
      501  6104   313   0 10:15AM ??         0:00.69 /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent
    Tue 10:31:26 {jsl@marlin:[~]} launchctl list | wc -l
    244
    Tue 10:44:25 {jsl@marlin:[~]} launchctl list | egrep -i microsoft
    -          0          com.microsoft.SyncServicesAgent.74304
    6104          -          com.microsoft.SyncServicesAgent
    Tue 10:44:34 {jsl@marlin:[~]} launchctl remove com.microsoft.SyncServicesAgent
    Tue 10:45:02 {jsl@marlin:[~]} ps -ef | egrep -i 'microsoft|PPID' | egrep -v egrep
      UID   PID  PPID   C STIME   TTY           TIME CMD
    Tue 10:45:22 {jsl@marlin:[~]}
    Just to be clear, that last step -- and the step which everyone here is looking for -- is pretty much just
    "launchctl remove com.microsoft.SyncServicesAgent", and the problem is taken care of. Cheers!

  • What is the function of the ovs-agent processes

    When I use the command service ovs-agent status on a Oracle VM Server, I get the following output:
    service ovs-agent status
    ok! process OVSLogServer exists.
    ok! process OVSPolicyServer exists.
    ok! process OVSMonitorServer exists.
    ok! process OVSAgentServer exists.
    ps -ef | grep ovs | grep -v grep
    root 2365 1 0 20:17 ? 00:00:00 python /opt/ovs-agent-2.2/OVSLogServer.py
    root 2369 1 0 20:17 ? 00:00:00 python /opt/ovs-agent-2.2/OVSAgentServer.py
    root 2372 1 0 20:17 ? 00:00:02 python /opt/ovs-agent-2.2/OVSMonitorServer.py
    root 2373 1 0 20:17 ? 00:00:00 python /opt/ovs-agent-2.2/OVSPolicyServer.py
    I'm trying to figure out what these processes exactly do, but I can't find any documentation about this on the Oracle site or with the help of Google.
    The python scripts don't contain any comments about the purpose of the scripts.
    Is there anybody that knows what each process does?
    Regards,
    Rob den Braber

    Thanks, but maybe I should have been more specific.
    I would like to know what each particular process does.
    I can't find it in the documentation or on Metalink.

  • Install Nagios agents on Solaris 10 to monitor from RHEL 5

    Hi,
    Could anyone let me know the steps to be followed to install Nagios agents on Solaris 10 for monitoring from RHEL5. It is very urgent please help me.
    Thanks
    Rao

    Hi Sugunakar,
    There are a few small things I can think of checking:
    I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
    Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
    smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
    /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
    I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
    Regards,
    [email protected]

  • Agent Desktop can not be logging

    I have this problem:
    After placing the credentials of the agent and passes connecting to the Cisco UCCX, get the error message: There has timed out the request for connection to Cisco UCCX application server, verify that the system is online and try to new.
    Thanks for your help

    Are you AD integrated?  Do you have more than one AD server listed for Authentication?  Can you log into AppAdmin?
    Sometimes what can happen is that: Your primary  AD server is not responding in time, so CUCM uses the secondary AD server as a backup.  However, CAD has a default timeout for login at 10 seconds, far too short to allow CUCM to try the secondary host.
    If this sounds like what's happening to you, then you can manually increase the CAD timer by editing the following file on the Agent PC, and restarting CAD.
    File
    C:\program files\cisco\desktop\config\phonedev.cfg
    Add Lines
    [ReqTimeout]
    Milliseconds=60000
    Happy troubleshooting!
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Held PO triggering workflow and agent assignment to myself

    Hi experts,
    Is there a way where I can prevent held documents from triggering my workflow?
    How can I achieve the following 2 scenarios for agent assignment:
    1) Create PO and workitem route back to myself
    2) Release PO and workitem route back to myself

    Lester,
    If you are a User01, then You started the process like if you are creating the PO, then the workflow is getting triggered. So now you are the initiator of the process, and in WF_inititor will be hold your user name user01.
    Thanks,
    Vijay.

Maybe you are looking for

  • Can't download file from Gmail...

    I have the latest version of Safari and now I can't download files from my Gmail...

  • Update ical and address book on iMac does not update iPhone or ipad

    I have updated my ical and address book on my imac, but it is not updating my iphone or ipad, I have activated icloud on all machines, can anyone help please. Have looked at the forum, but cannot find my issue specifically. Regards

  • Browser says running but wont open ??

    When i click on my icon it will say that it is responding but will not open. Should i downgrade? I have tried uninstalling and reinstalling and still no response. I open my task manager and it says running but no browser, i just see a hourglass?? Ple

  • Jobs are getting delayed.

    Hi All, We are monitoring many jobs daily. But now some of the jobs are getting delayed (2 to 3days). We have deleted that job and rescheduled to solve that issue. But we are unable to find the reason why it was happening suddenly. Any suggestions wi

  • ** Unable to Open IR and ID

    Hi Friends, Whenever I Open Integration Repository (or) Integration Directory in XI start page (XI 3.0/PI 7.0), the dialog box comes and ask as follows: Do you want to save this file ? Name: repository.jnlp Type: Unknown File Type From: <System Name>