Follow up material - old material's stock goes down and up

Hello,
I have a question related to Follow up material. Lets assume that material A is to be replaced by material B, this is specified in the MRP4 view. In the field Eff.-Out an estimate of when the last unit of material A will be received is given in.
If material A's stock drops down to 0 then material B should kick in, but what happends if afterwards material A's stock goes up again and then both material A and B are in stock. Will SAP notice material A's stock level and use it?
Please advice! Thanks!
mr

I have a question related to Follow up material. Lets assume that material A is to be replaced by material B, this is specified in the MRP4 view. In the field Eff.-Out an estimate of when the last unit of material A will be received is given in.
If material A's stock drops down to 0 then material B should kick in, but what happends if afterwards material A's stock goes up again and then both material A and B are in stock. Will SAP notice material A's stock level and use it? \
If you don't know the "Effective-Out Date" (MARC-AUSDT) [because your stock situation is always changing), don't define it in material master. System will try to ramp down the stock of old material first and use the new one after that.
However, you should take measures to prevent increasing the stock from the old material. In the system you can block it for purchasing as it was told you already.
Regards,
Csaba

Similar Messages

  • Need to send a mail while safty stock goes down compare with actual stock

    Dear experts,
    I Need to send a mail to concern persion while stock goes down compare with safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Your best bet may to be place your check in the a user exit for goods movements.  The enhancement is MB_CF001, the component is EXIT_SAPLMBMB_001.
    Hope this helps,
    Mark

  • Need to send a mail while safty stock goes down

    Dear experts,
    I Need to send a mail to concern persion while stock goes down from safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Hi Jai,
    According to my understanding,
    As soon as the stock goes down from the safety stock a mail should be triggered.
    Probable solution (in my opinion)
    create a flag in the table set it whenever the stock value goes down.
    make calculations like (safety stock as today - safety stock previous date) = 0 if not set the flag and construct a workflow withe receiver settings based on the flag field and trigger a mail to the concerned person.
    This is just my idea.
    Try it and revert
    Thanks and Regards
    Srikanth.P

  • My iPhone is about 6 months old now and I would say I don't use it that much. Yet for the last month or so the battery life has been going down and today after having charged it to 100% this morning, it was at 5% at 4 pm this aft. help!!

    my iPhone is about 6 months old now and I would say I don't use it that much. Yet for the last month or so the battery life has been going down and today after having charged it to 100% this morning, it was at 5% at 4 pm this aft. help!!

    Ok Fellas, let me give you a clue:  Games, particularly those that make heavy use of graphics and sound are notoriously power hungry.  In fact, when I was in the Navy many years ago, the folks working on the NTDS (Navy Tactical Data System)  computers used a version of Space Invaders to load test the AN/UYK-43 computers.
    I have also noticed that all of my laptops (I have a brand new Toshiba dual core, an older Toshiba single core, plus 2 Dell dual core machines) have significantly shorter battery life when I play Company of Heroes than when I am just reading e-mail or surfing the 'Net.  I have also noticed the same behavior when I play games on my 4th gen Touch and my iPhone 4.
    The fact is, iOS 5 did make some major improvements as well as adding some nice functionality like iMessage, wireless synch, and such, but the down side is that depending on how you use the device battery life can be shorter that what you may have experienced with pervious versions of iOS.  Its just the nature of the beast...
    We now return you to our regularly scheduled programming.....
    Oh John....  Oh Marsha.....

  • On my mouse when I scroll up it goes down and vice versa?

    I just updated my mac and now on my mouse (which was fine before) when i scroll up it goes down and when i scroll down it goes up?

    Go to Applications>System Preferences>Mouse and you can check or uncheck "Move content in direction of finger movement when scrolling or navigating".
    Hope this helps

  • I have a 5th Gen iPod Touch. I went in my messages to save a video in my camera roll. The video is not in my camera roll but my memory keeps on going down and I don not want to restore my iPod. Please help me

    I have a 5th Gen iPod Touch. I went in iMessage to save videos that were sent to me in my camera roll. The videos do not appear in my camera roll but my memory keeps on going down. I do not know how to solve the problem. I do not want to restore my iPod but I want to get my memory back. Please Help ME

    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    An "other" larger tha about 1 1/2 usually indicates that the "other" includes corrupted files.
    First try:
    "First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
    as recommended by:
    How do I get rid of "other" storage: Apple Support Communities
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • Bt Infinity speed in going down and down

    Welcome All
    I have a problem with Bt infinity option 2. Since I jon BT in June this year my download and upload speed is constantly going down every months. First There was 47/17 with 54/19 max on my line is OK. After few weeks 46/16, after few weeks 42/16, after that 40/15, after that 38/13, 38/12, 36/12, I checked on BT site my brodband speed and its been changed to max 54/13. Then I called CS and after 24h My speed has gone up to 42/12 and after few weeks (now) is 29/8.5. I choose infinity option 2 to get the best possible speed from my line but this is not what I expected. In that case by the end of contract I will end up with 0/0 I wrote 2 complaints but there was no answer at all. Yesterday when I called CS they redirect me to technicall support and I've been told that BT can give me minimum 50% of estimated speed on my line and that is OK, There is no fault on the line, my PC is working fine.
    That meens BT is changing my speed, ip profile was 48/20 at the beginning now is 31/20
    And one thing, I've been told that upload speed dont have a minimum so I can end up with 0 without problem
    anyone has an idea what to do?

    I did not notice any works near the cabinet, i've sent an email to mods. Maybe there is a chance to reset ip profile so it can be checked ones again? As i tried reset hub several times over last few weeks and propably i make it worse but i didnt know about how resetting your hub affected ip profile and line looks line dont deal with the amount of data or something. Im waiting for response from mods and in mean time maybe some of you can give me more advice what to do.
    And one thing: when i do speedcheck on btwholesale.com on the results when the download green bar is "Max Achievable Speed 0Mbps" is it that strange? should be max ip profile or something. on upload green bar there is 20Mbps as ip profile

  • My internet keeps going down and when I try to renew the DHCP lease it stops working altogether

    Every couple of weeks my internet would go down, I would be surfing the web and suddenly my connection would fail. I would try renewing my DHCP lease and every time I did I would get an IPv4 address of 192.168.0.100. Originally, restarting the router would fix the problem but the past couple of times they needed a technician from the provider to fix it. Even using the Ethernet cable doesn't work either.
    is there a reason why this keeps happening and how do I stop it from happening again? Is there anything I can try to fix it on my end?
    my computer is a five year old MacBook, running OS X 10.9.4

    Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
    Using current version IPad mini.
    Ios7 is  HUGH PIECE OF CRAP!!!!

  • Im compromised? Net goes down and dmesg warns alot..

    Hello, I was installing CoV on my absolutely newly installed archlinux 0.8 when my network went down.
    dmesg showed me the following messages:
    TCP: Treason uncloaked! Peer 217.232.215.243:1560/52845 shrinks window 299929285
    :299930465. Repaired.
    TCP: Treason uncloaked! Peer 217.232.215.243:1560/52845 shrinks window 299962681
    :299964285. Repaired.
    TCP: Treason uncloaked! Peer 217.232.215.243:1560/52845 shrinks window 299962681
    :299964285. Repaired.
    TCP: Treason uncloaked! Peer 217.232.215.243:1560/52845 shrinks window 299962681
    :299964285.
    According to a quick check on Google it could be either 'the remote host decided to shrink the TCP window size without negotiating it with my Linux box.' or someone trying to get to me..
    Which ever it is, could anyone care to give me some pointers on what is happening here and what I could do in arch to stop it from happening again(more packages to install/configuration needed I havent seen yet)? I haven't installed any type of firewall tools in arch yet, but I do have a server in my closet running an updated Clarkconnect 3 firewall.
    I checked the ip and it belongs to Deutsche Telekom AG according to ripe.net. My firewall doesn't warn me of anything so I am a little confuse atm..
    Last edited by akejo (2007-03-22 19:07:34)

    try unistalling and reinstalling teamspeak because if im not mistakin it loads teh proper codec for teampeak to match your card when its installed!

  • My phone volume goes down and the ringer icon comes up and stays on blocking view. The buttons are not stuck. Why is this appending and how do I fix it.

    Why does my iPhone volume  ringer icon come on by itself, the volume gets turned down on its own then the icon stays on and blocks my view. It also will at any time make any screen switch to large pictures that I can only see a small portion of screen at a time. I have tried too tap screen to make it go back to normal and nothing happens. I then try to turn it off. After several tries I am successful Its hard slide power off button because only a small section is showing. What is happening? How do I fix this?

    Unfortunately this is probably a hardware issue and you will need to take it to an Apple Store.

  • IMac hard drive keeps going down and now will not boot up.

    This is my first post here so I hope I am in the correct area. I recently purchased a iMac 24" Intel Core 2 Duo Processor, 2.16GHz, 2GB RAM. It ran well at first but now I keep getting errors that say "There has been a problem with your system, you must turn off the computer by pressing and holding the power button on the back of the panel". This has been happening more and more often.
    I took it to a local Apple auth repair shop. The guy looked at it for 10 minutes, said everything is fine and sent me home.
    Now when I turn the computer on all I get is a blank white screen that never changes.
    I just switched from PCs to Macs, I have to say that I am more then a little frustrated with how poor the computer has been. Does anyone have any suggestions on what I should do now. I do have the Applecare for another 26 months. Thank you.

    "There has been a problem with your system, you must turn off the computer by pressing and holding the power button on the back of the panel".
    This means Mac OS has crashed. Mac OS shouldn't crash too often. You should give applecare a call. They'll probably tell you to re-install the OS.
    Robert

  • When Serial Goes Down and ISDN Picks Up configure required

    Hi
    As per attached diagram we need configure on routers please find attachment.

    Hi
    The best advice I can give you is to talk to your local cisco rep and have them help you to configure that.
    why ? We are missing alot of information that we need to know to do a good job and this is not just a lab or test, this I understand, is a live network and if we make this wrong it will not funktion as intended.
    It is better to talk to a local ciscorep and they can go over the full design with you so that you do not get a nasty surprise when things do not go they way they are supposed to.
    Also you will make contact with someone that can come and help you on short notice and knows your environment.
    To have information here on the forums is all good and well but it is not a substitute for a real techguy being there with you to help you when things go wrong or to help you plan the network and contingency plans.
    Good luck
    HTH

  • Batteries goes down and up

    anyone please enlighten me, my macbook battery is weird, why is it when my battery is below 50%, my macbook wont start, when i continuously use it until 18% from full charge, it would go back up to 51 %, is there someway to correct it, my cycle time is just 111, thanks
    macbook pro 15   Mac OS X (10.4.10)  

    In addition, it takes me over 3 hours to charge the battery, is that normal? or that when i restart my comp in battery less than 50 %, the battery will register 0 % upon restarting... i tried calibrating it many times already, draining the battery to sleep then charging it until green then leaving it there for another hour. is there anyway to correct this. or is the battery have a problem?
    macbook pro 15   Mac OS X (10.4.10)  

  • Error while  uploading stock using Mb1c and migo

    Hi
    Following error is showing,while  uploading stock using Mb1c and migo
    Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
    Can anyone help me?/
    Thanks

    Hi
    You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
    Please check the implementation of the BAdi , i feel that it has not been implemented properly.
    This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
    The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
    The following values are allowed for parameter CH_SUBRC:
    0 Posting allowed
    4 Period & is not open for account type & and general ledger &
    6 No authorization for posting period & &
    This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
    Thanks & Regards
    Kishore

  • Server instance is going down very frequently

    Hi,
    Please help me solving one problem. The details are as follows:
    Two web applications built on struts framework are running on one server. The server is SAPJ2EE 6.20 server which is running on SUSE LINUX.
    I have SAPJ2EE 6.20 client interface using which I deploy these applications. Now once the applications are deployed, it runs perfect but after some time the instance of SAPJ2EE 6.20 application server goes down in linux and it remove these two application.
    To make these two applications avaliable to the users I have to restart the instance of application server on linux and again deploy the applications. The behaviour of the same is very dynamic. Sometime it goes down 2 - 3 times in a day, sometime once in a day,
    sometime once in 3 - 4 days and sometime once in a week.
    On server I checked the logs but I didn't get any clue. The logs contains normal java exceptions like NULLPointerException, ExhaustResultSetException, IOException etc.
    I guess the application is throwing some error because of which the server instance is going down and these errors are not showing in logs.( By error I don't mean exceptions, I mean errors like MemoryError etc.)
    Am I thinking correct or is their any other issue? How to verify what is going wrong?
    Please please please guide me on this as this is very important for me.
    thanks and regards

    Hi,
    I would suggest to have look at the application server console. Do you see any OutOfMemory or any sort of Exception over there
    Please paste it here
    regards
    Vivek Nidhi.

Maybe you are looking for