Follow up on FSB problem

Well, I have read all of the sticky notes and troubleshooting guides and I am just lost at this point... Being an A+ instructor, I just don't understand how this could be happening....
I am able to get the FSB of my MB to 120, anything above that and the system does not post. Runs fine at 120 for hours. Checked cooler. Attempted various settings for memory (+33/+66/standard) and different voltages for CPU. Disconnected power from everything except MB, same problem.
Seems like alot of people are having the same problem because there are alot of posts about this. However, I can't find a single solution, other then suggestions to check cooler installation. I have everything installed right and I am using all brand name parts-except the MB and video card which are MSI X( X( X(
Here is my system again:
KT3Ultra2-r
Athlon xp2000+
512mb Samsung PC2700
80GB IBM DeskStar
MSI GeForce4 MX440
350w true PS
40/12/48 CDRW
16x Toshiba DVD
Anyone have any ideas?

Welcome To  Discussions Ands43!
It is not necessary to start a new Topic, regarding the same issue.
Please repost this entry in response to your Previous Topic.
ali b

Similar Messages

HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

Steve!
There is a lot more "meat" in this .
I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

(The Following printhead has a problem) Blackyellow K/Y)

I have an HP Officejet Pro L7780 All-in-One. Recently it does not work due to a printhead error (The Following printhead has a problem) Blackyellow K/Y) we did buy new original HP printhead Blackyellow K/Y and replaced but the error message still shows.
Please help. Many thanks.

Hello @VC15,
Welcome to the HP Support Forums!
I understand that you're getting the error "The following Printhead has a problem: K&Y" on the front panel of your HP Officejet Pro L7780 All-in-One Printer. I would like to assist you today with resolving this Printhead error. Because the error remains since installing a new Black and Yellow Printhead, there is the likelihood that the Printhead contacts are dirty, or there is a hardware defective with the Black and Yellow Printhead compartment. Please follow the steps below to resolve this Printhead error.
To start troubleshooting can I please have you click here. Once the support document opens please run through Step one, and Step two. Should the error message persist, than a replacement printer would be needed to correct the hardware failure.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Low FSB problem on MSI K7N2 Delta-ILSR.

Today is the first day this happened, and I don't know why it did it. I've had this for 5 days with no such problem like this B4.
Here goes... in my BIOS, I have the FSB set to 166(333), and the Ram synced with it. This afternoon I started up my computer and went into Aida32, and it said my FSB was at 157(314), it usually says 168(336).
Aida32 isn't lying, my clock was even gaining time. (That is the reasond I checked)
My question is, what would cause this?
Could it be bad power? A lousy start up?
Maybe the CPU? I've seen this happen on a couple other nForce2's I've had. Could it be nVidia's fault?
I just don't know were to start on troubleshooting this problem.
BioHaz

Quote
Originally posted by wrosensteel
I don\'t know that I would trust the software reading as much as the bios itself. There may be a glitch in the software code.
If it says the same when you go into the bios as Aida32 is reporting, you may have a defect somewhere on the board causing the issue. If not, uninstall your current version of Aida32 and try going back to the previous version and see what it reads.
That is what I first thought, but the real-time-clock is also running very fast when aida32 said it was 157, as you know the clock is FSB related.
I think I know what the problem is, and I'm almost sure it's power related. If I turn on my computer first then my monitor, my UPS overloads and shuts everything off plugged into the battery section of the UPS. To avoid this I have to turn on the monitor first, then the computer.
The day I started experiencing this problem, is the day that I turned on my computer first then the monitor, thus the UPS overloaded. So what I did to fix this, is I shut down my computer, switched off the PSU, unplugged the power cord, plugged it back in, turned the PSU on, then the computer on (monitor still was on), then it started it up and everything was back to normal. I've restarted my computer 10 times, and it's been working good ever since.
I'll keep you posted if I run into this problem again.
BioHaz

Follow up to "Authentication Problem"

I have attached a file which is a screen shot of the problem I am having. (Rename the file to .jpg)
The IVT stack (2.3.0.0 per the screen shot) connects to the phone OK and can send a business card. PC Suite is 6.81.13.0.
The PC suite connects as you would expect and then gives the "Cannot Authenticate" message as shown in the screen shot. The phone shows a successful connection followed by a disconnection.
No amount of uninstalling/unpairing helps.
Attachments:
PC Suite Problem.xml ‏60 KB

Welcome To  Discussions Ands43!
It is not necessary to start a new Topic, regarding the same issue.
Please repost this entry in response to your Previous Topic.
ali b

Follow up to earlier problem

Following on from my flashing question mark problem (see a few topics down)i have followed the instructions carolyn gave me up to the disk utility. When in disk utility i can only see the DVD media drive and the OS X installation CD, but not the hard drive which i normally repair.
Am i okay to install the OS X, or will this totally wipe my files? (photos, music, work) thanks for any help:)

Welcome To  Discussions Ands43!
It is not necessary to start a new Topic, regarding the same issue.
Please repost this entry in response to your Previous Topic.
ali b

Fsb problem with kt6

Hello,
I just bought a kt6 with a xp2700+ and i cannot raise the fsb to 166. At default when it is set to 100, no problem at all. But if i go to 133 the pc starts up boot under windows and 10 minutes later shutdown. (or sooner if i use the cd rom)
I tried to swap memories, change latency, change the graphic gard, no improvements.
Do you think it could be the power supply or the mainboard ? (cpu idle at 50 °c = 123 F)
My power supply specs (400W noname)
3.3V - 18A
5V - 27A
12V - 16A
My system:
xp2700+
kt6
ibm hdd 80go
radeon 9800 pro
audigy 2 (not installed for testing)
floppy
dvd pionneer
Thank you for your replies.

Thank you for your reply. I checked everything and concluded it might be the processor or the mainboard. I managed to exchange the board with my retailer. I have now a brand new kt6 and everything seems to work perfectly.
But my 2700+ is at 61 °C idling, is it a normal temperature ?

The Webmail version of Lotus knows keep giving the following error message: A problem has occurred which may have caused the current operation to fail. How do I fix this?

I downloaded the new version of Firefox.
Now, when I try to access my webmail from Lotus Notes (at https://webmail.WorldVision.org) the following message shows up when trying to preview my inbox.
"A problem has occurred which may have caused the current operation to fail."

Actually, this isn't a cache problem, it's an issue with iNotes and Firefox 4. I found the answer in comments at a similar question. See:
https://support.mozilla.com/en-US/questions/798271#answer-153202
I downloaded the Remote XUL Manager add-on for Firefox (https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/), restarted FF, went to Tools and scrolled down and clicked on "Remote XUL Manager." I clicked "Add" and pasted the URL for the link where I log-in to Lotus Notes into the dialogue box, and ta-dah! Back to email. Took me longer to type this than fix the problem.

KT6 Delta LSR FSB problem solved!

Here's some FYI for anybody with boot up troubles. A friend made a suggestion that got me thinking the dividers might not be set quite right on my mobo so I decided to raise the FSB to 210 and it solved my booting problem. I've tested this out several times and it definately works. Instead of trying to run 11 X 200, I'm at 10.5 X 210 and scoring great:
Anyone having troubles might want to try this out. Good luck.

Hahahaha,
Sorry a bit dutch....stuff happens....all other software running
My Opteron 1.4GHz beats that hands down:
SiSoftware Sandra
Breekpunt Int Buffered iSSE2 (Integer STREAM) Resultaten
Opdracht : 3216MB/s
Schalen : 3360MB/s
Toevoeging : 3348MB/s
Triad : 3334MB/s
Data Item grootte : 16-bytes
'Buffering' Gebruikt : Ja
'Offset Displacement' Gebruikt : Ja
Bandbreedte Efficiëncy : 414% (geschat)
Breekpunt Float Buffered iSSE2 (Float STREAM) Resultaten
Opdracht : 3194MB/s
Schalen : 3334MB/s
Toevoeging : 3343MB/s
Triad : 3330MB/s
Data Item grootte : 16-bytes
'Buffering' Gebruikt : Ja
'Offset Displacement' Gebruikt : Ja
Bandbreedte Efficiëncy : 413% (geschat)
Test Status
Geheugen Gebruik door Test : 255MB
NUMA Ondersteuning : Geen
SMP Test : Geen
Totaal Aantal Test Threads : 1
SMT Test : Geen
'Dynamic MP/MT Load Balance' : Geen
Processor Affiniteit : Geen
Chipset 1
Model : Micro-Star International Co Ltd (MSI) Apollo K8HTB CPU to PCI Bridge
'Front Side Bus' Snelheid : 1x 200MHz (200MHz data rate)
'In/Out Width' : 16-bit / 16-bit
Maximale Bus Bandbreedte : 800MB/s (geschat)
Logische/Chipset 1 Geheugen Banken
Chipset 2
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
'Front Side Bus' Snelheid : 1x 200MHz (200MHz data rate)
'In/Out Width' : 16-bit / 16-bit
Maximale Bus Bandbreedte : 800MB/s (geschat)
Logische/Chipset 2 Geheugen Banken
Bank 0 : 512MB DDR-SDRAM 'Registerered' 2.0-3-3-3CL 1CMD
Aantal Kanalen : 1
Snelheid : 2x 127MHz (254MHz data rate)
Breedte : 128-bit
Maximale Geheugen Bus Bandbreedte : 4064MB/s (geschat)
Mogelijkheden
MMX Technologie : Ja
SSE Technologie : Ja
SSE2 Technologie : Ja
SSE3 Technologie : Geen
EMMX - Extended MMX Technologie : Ja
HTT - Hyper-Threading Technologie : Geen
:hypecrite:

X38 ocing not happening fsb problem

Have had lots of help else where re this problem, though with no sucess, so have contacted msi and am awaiting reply.
I change the fsb from 266 to anything 300-440, bios states new cpu value/speed however it dosn't actually change, when i boot into windows it is 266, i can lower the multiplier that stays changed so do all other settings volts etc but fsb always reverts back to 266 no matter what i try fsb volt increase does not help...anyone have any ideas

Which BIOS Version are you currently using?
Is DOT disabled in BIOS?
Quote
when i boot into windows it is 266
Which tool+version are you using to monitor FSB clock speed?
If you change FSB clock speed to, let's say, 280 MHz and save & exit, will the BIOS revert to 266 MHz as well, when you re-enter after start-up?

845e max a fsb problem

no need to tell u what i have because it's listed below
now my problem is that i can not up the fsb to anything more that 110 why? i should be able to take it to at least 133 rite? if i try anything higher it will not boot. i also tried uping the vcore to 1.65 but that also did not help so i am thinking it is that the board is bad. any suggestion would be greatfull thanks>

It might be the memory, try setting it to 200MHz so it will have more room to overclock to.

FSB Problems...

Hello guys,
(My Setup:
MSI KT4 Ultra & Athlon XP 2400+)
although i've got problems with that CRC-Error Stuff too, my current problem is another one.
When i try to overclock my CPU by increasing the FSB to 134 or 135 Mhz (for example), this Infoview program from the MSI-CD (and even some other programs) indicates that the FSB is set to 142 Mhz and my CPU is set to 2133 Mhz, which is accordig to the 142 Mhz FSB.
Whats wrong - anybody got an idea?????
ThX in advance...
Mistagi
(don't consider my english - i'm from germany )

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I'm having the same problem where my system becomes very unstable at higher bus speeds. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.

"the following printheads has a problem.

I have an Officpro 7600 series printer and I keep getting the error "the following printhead(s) has a problem" it then goes on to list all 4 cartridge colors. I have changed the cartidges but keep getting the same error. How do I fix it?

ON January 23, 2012 I contacted HP Service to assist in solving my printer problem. I was very detailed about my printers problem in description and error message given. I was told that HP Support could fix the problem and I was sold an annual Service Program for $40. However during the conversation I was also told the cost would be $42 and then $47. Since I wanted this problem resolved and I was assured the problem could be resolved I accepted the program. I was never offered the one time offer which I have found out since.
After about 1 hour, being hung up on, having to call back, repeat the story for the second time, the problem was never resolved. In fact I was told it was a hard ware problem. If that was the case, then it should of been mentioned to me prior to my investment. Then the tech wanted to sell me a new set of ink cartridges, when the message is for the BK/YE print head. I mentioned to him that I just replaced the cartridges and they where all new. Then I was told that I needed to purchase a new HP printer! He is going to call me back today. I have tried to generate a new on-line chat session, however that is for those products still in warranty. I guess that I have just been taken advantage of and I have no intension in purchasing an HP product that I can not get support and solve or fix an issue without misrepresenting the service process. I feel that I have been taken advantage of!

KT4VL FSB Problem!!!!!

I have an XP 2100 with the KT4VL motherboard and i cannot set the fsb to 133 which is where is should run comfortably. If i set it to 133 in bios(which by the way is the most current version of bios) the system will not boot. It gets to a generic light blue winxp screen and has an error message. The message is different everytime but seems to always have the word "AGP" in the error description. If I try to set fsb using fuzzy logic, as soon as i get past 112Mhz, the system just instantly restarts. I have another system identical processor, video, etc... except that one has the KT3 Ultra and i run that at 133 no problem ever. Any Ideas?????
KT4VL, XP 2100, 512MB DDR266, Nvidia G4 @AGP 8X, WinXP Pro.

bas. im new to this but it confuses the hell outta me.
the cpu cooler is OK to start at 110 mhz, but if it starts up at 111 it instantaneously overheats?
even if this isnt the problem im having ( my temps have been below like 40 c at 100 fsb but it wont work at 133) im curious as to whats up with this.....

FSB problem

I would greatly appreciate everyone's help in solving my problem. I need my computer working and cannot do it.
I have Athlon 1700+ processor and KT4V mainboard. I set the FSB from 100 to 133. Then my CPU indicated 1467 MHz and I changed FSB to 154. After rebooting and saving BIOS i get no signal sent to my monitor. I suppose I set FSB to high, but now I dont know how recover my previous state.
If anyone can help me with this problem I would really appreciate it. Thanks all for your help!

clear cmos and it will set it back to defaults..
turn off your computer and find the pin on ur board, move the jumper to the clear cmos setting, unplug ur computer, wait a few minutes, move pin back to original location, plug in computer, power up...
you will have to set up anything in bios you previously changed that wasnt a default setting

Follow up on FSB problem

Similar Messages

Maybe you are looking for