Follow up question...changing countries

Am I correct that if one moves from one iphone country to another, the phone has to be replaced. Getting a new SIM card, with contract, will not work?

In the case of an iPhone from a country that does not provide an unlocked version, you would need to sell your current iPhone and buy one for that country.

Similar Messages

  • I've moved countries and wanting to update in my profile. It won't let me change countries until I cancel my itunes Match Subscription - how do I do that?

    I've moved countries and wanting to update this in my profile. It won't let me change countries until I cancel my itunes Match Subscription - how do I do that?

    You need to reset the password for the "old" account, and then use that to turn off iCloud.  Then you will be able to sign in with your new ID.
    You can reset your password at iForgot.apple.com.
    If you don't know the answers to the security questions, you will need to start there.
    http://support.apple.com/kb/HT5312
    -If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com.  Clicking the link will send the reset to your rescue email address (NOTE:  This is not the same address as your Apple ID email)
    -If there is no link on the page, then you didn't establish a rescue email address.  Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security.  You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
    -If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
    HTH

  • Error Running the following command - "ipsadmin change component iwtUserInfoProvider iwtUserInfoProvider.xml". Please help?

    I am trying the run the ipsadmin command as follows:
    "ipsadmin change component iwtUserInfoProvider iwtUserInfoProvider.xml"
    And I am getting the following error:
    "Profile change failed. More info: com.iplanet.portalserver.ipsadmin.Component"
    I just added some more attributes to the xml file
    that look like these :
    <!- BEGIN NEW ATTRIBUTES -->
    <iwt:Att name="iwtUserInfoProvider-EntryDN"
         desc="Entry DN"
         type="string"
    idx="a204"
         userConfigurable="TRUE">
         <Val>New</Val>
         <Rperm>ADMIN</Rperm><Rperm>OWNER</Rperm>
         <Wperm>ADMIN</Wperm><Wperm>OWNER</Wperm>
    </iwt:Att>
    <!- END NEW ATTRIBUTES -->
    Question:
    1. What did I do wrong?
    2. Is there a log file that stores the ipsadmin
    errors?
    ./ipsadmin -chkxml iwtUserInfoProvider.xml
    returned "Operation completed successfully".
    So I know there is nothing wrong with the xml
    file.
    Any help in fixing this problem is gratefully appreciated.
    Thanks
    Sahadev

    Hi There,
    The ipsadmin tool does not seem to be able to dynamically add any new attributes to a component. the best would be to do a "ipsadmin delete component iwtUserInfoProver" and then "ipsadmin -import iwtUserInfoProvider.xml" this should "update" the component with the new attribute.
    HTH.

  • HT5312 I haven't received my email for my security question change yet

    Waiting on my request for my security change.

    Hello there, H3athr.
    The following Knowledge Base article offers up some additional information for getting your security questions changed for your Apple ID:
    Apple ID: All about Apple ID security questions
    http://support.apple.com/kb/HT5665
    What should I do if I don't remember the answers to my Apple ID security questions?
    If you forgot the answers to your security questions, try answering them at least once to see if you can get them right, even if you're not sure you remember the answers. If you're confident that you can't remember them, try one of the following:
    If you have three security questions and a rescue email address, sign in to My Apple ID and select the “Password and Security” tab to send an email to your rescue email address to reset your security questions and answers.
    If you have one security question and you know your Apple ID password, sign in to My Apple ID and select the “Password and Security” tab to reset your security question.
    If you have one security question, but don't remember your Apple ID password, contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
    Note: If you forgot your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time, you will not be able to reset your password and will not have access to your account.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Change countries on iTunes store

    Hi, I moved to the US from Mexico and I want to change countries on my iphone so I can buy apps here. I do have a CC and a billing address. Is that possible?

    App Store Frequently Asked Questions (FAQ) - http://support.apple.com/kb/HT2001 when using iTunes --> "To change countries, scroll to the end of the iTunes Store home page and click the flag indicating the current country. To choose a different country, click the appropriate flag."
    iOS: Changing the signed-in iTunes Store account - http://support.apple.com/kb/HT1311  - Change your iTunes Store country: "Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region."
    You will, of course, need to change your address and enter valid credit card information after you have changed the settings.
    iTunes Store: Changing Account Information - http://support.apple.com/kb/HT1918
    Further tips on changing country - https://discussions.apple.com/message/20029737 - problems you encounter when changing iTunes country

  • If I'm trying to change countries and I need to get rid of a balance that is insufficient for anything in the iTunes store, what should I do?

    I'm trying to switch my iTunes account to a different country but I have $0.29 left on my account that iTunes is telling me I must spend before I can change countries. Obviously, 29 cents will not buy me anything in the store, thus the money will be just sitting there forever. Please help.

    You can try to Contact iTunes here...
    Contact iTunes Customer Service
    http://www.apple.com/support/itunes/contact.html

  • Follow up question about image not looking good in canvas-Shane?

    I guess this is a follow up question for Shane....
    You wrote this in response to someone a year ago which helped me out.
    Shane's Stock Answer #49 - Why is the quality different between what I see in the Viewer and what I see in the Canvas?
    Well... the viewer is just that-- a viewer. It will display anything that fcp will recognize as usable video or graphics. The canvas is a viewer too, but at the pixel dimension specified by the settings of your project and sequence.
    For example, if your graphic or footage is much higher resolution than your 720x480 DV sequence, FCP is interpolating down your file to fit the settings of the sequence. Usually this makes it look not so hot. DV is a 5:1 compression working with a 4:1:1 color depth. Your pristine picture images and graphics are being crushed.
    Same with picture files. HIgh res pics now adopt the sequence settings and will render to those specs, and most likely they are not as high quality.
    So, based on your answer, I made an HDV sequence, dropped my DVCPro50-NTSC footage and my tiffs into the sequence and now the stills look great. Is this an okay workaround or do you have another suggestion? I'm worried about this HD sequence taking too long to make a compressed QT from in the end.
    Thanks!

    Photo JPEG is a good option.  But this all depends on what your final output will be.  If you are going to make a DVD, then that is SD, so using an HD sequence setting makes no sense.  Photo JPEG is good, but not realtime in FCP.  DV50 or ProRes NTSC are good options.
    Unless you are making an HD master...in which case ProRes 422 for HD is good

  • View follow up questions in Q&A pod in a threaded or some other related view

    Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

    Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

  • IMovie and external hard drive: follow up question

    This is a follow up question from the iMovie 6 forum. Hopefully, this question will help the poster on that forum as well. I, too, am working on multiple iMovie 5.0.2 projects at the same time and am running out of hard disk space. I would like to transfer remaining miniDV tape to an external hard drive and, when finished, transfer these clips from the external hard drive to the current iMovie project in my Powerbook, one project at a time. Is this possible ? Will I transfer files from the external hard drive to the Powerbook hard drive and then to iMovie, or directly from the external hard drive to iMovie ? Do I have to format the external drive to Mac OS Extended as advised in iMovie 6 forum in order to transfer miniDV tape to the external hard drive ? When pressing the erase tab to format the external hard drive, will this erase files already on the hard drive before formatting ? Can I transfer projects I am not working on from iMovie to the external hard drive and then transfer them back to the Powerbook when it is time to work on them ? Sorry about all the questions but I need to think very simple-minded when it comes to computer related issues. Thanks for your help.

    I was able to use and store iMovie in the external hard drive using my Powerbook as a monitor, so I presume it is formatted correctly
    Sorry, but you cannot assume the drive is formatted correctly. iMovie doesn't tell you the drive format is incompatible with iMovie. (it should, but it doesn't.) Some iMovie project features can be saved and some cannot.
    It's easy to check the disk format. In the Finder, click on the drive icon and choose File > Get Info from the Finder menubar. The window that opens shows the disk Format. You want it to say "Mac OS Extended". "(Journaled)" is optional.
    With some drives, sometimes even that can be wrong. To be sure, use Disk Utility to check the format. When you click on the drive in the list along the left side of the Disk Utility window, the format is displayed at the bottom of the window.
    Always, always, always check the disk format before using a drive with iMovie.
    Karl

  • Follow up question...

    I just purchased a Airport Extreme from the Apple Store yesterday. I purchased it to extend/share my iPhone 5 hotspot. I have figured out how to have AEBS join my hotspot, but it does not seem to have access on the Ethernet ports in the back?? This is my needed feature, unfortunately I live in an area that only offers DSL and only 2.5mbps.. .  Using my phone I'm able to receive 10-20mbps on LTE/4G, and fortunately for me I have unlimited data on my hotspot. So I'm set for the wireless devices in my home, but struggling getting wired devices working....
    Any help will be greatly appreciated!
    Thanks,
    Tim
    Info
    iPhone 5 iOS 7.0.4
    Windows 8
    Linux Ubuntu 12.10
    Airport Extreme Base Station, iOS 7.0.4
    This solved my question by Bob Timmons  on Nov 28, 2013 3:33 PM
    No, only the AirPort Express. There are 2 Ethernet ports on the Express. If you need more, you can add an Ethernet switch.
    The Express has a special feature called ProxySTA that allows it to join a network and the Ethernet ports will be enabled when it does this.
    Might be fun to ask one of the sales guys what exactly ProxySTA is and what it does before you explain it to them. Even the "genius" may not know.
    See the answer in context
    Follow Up Question----
    I asked the apple salesperson about proxySTA, first I got a blank stare then, some nonsense to attempt they knew what it was.
    So I picked up the Express, set it up to join my hotspot and it works really well!!! The only problem is the hotspot only allows five connections. The express eats one, that only leaves four! Is there another way to set up the express so it can handle the dhcp so my hotspot only sees the one connection to the express??
    Thanks,
    Tim

    Now please perform a hard reset on the second Express by holding in the reset button for 10 seconds, then release. Allow a full minute for the Express to restart to a slow, blinking amber light.
    Make sure that the Ethernet connection from the first "joining" Express goes to the WAN "O" port on the second Express creating a wireless network.
    Don't worry about the Double NAT message for now, just make sure that you can now log on to the Internet through the second Express wireless network.
    You may need to power off both Express devices and restart the "joining" Express first, then start up the "creating" Express.
    Once you verify that everything is working, you can go back in using AirPort Utillty and click to ignore the Double NAT so that a green light will be displayed on the second Express.

  • Follow-up question on ZXM08U16 table E_TDRSEG  (function group XM08)

    Rich's suggestion worked (on how to retype the E_TDRSEG table received from MIRO by include ZXM08U16 in the function group XM08.
    Before asking my new follow-up question, let me recap the original SAP typing of this table and the way I've retyped it (following Rich's instructions):
    The original SAP typing is:
    E_TDRSEG TYPE  MMCR_TDRSEG
    TYPES: mmcr_tdrseg TYPE mmcr_drseg OCCURS 0,
    TYPES: BEGIN OF mmcr_drseg_co.
            INCLUDE STRUCTURE cobl_mrm_d.
    TYPES: cr LIKE drseg_cr    OCCURS 0,
           unpl_refwr TYPE refwr,
           END OF mmcr_drseg_co.
    TYPES: BEGIN OF mmcr_drseg.
            INCLUDE STRUCTURE drseg.
    TYPES: cr LIKE drseg_cr OCCURS 0,
           co TYPE mmcr_drseg_co OCCURS 0,
           sm LIKE drseg_sm OCCURS 0,
           charact TYPE rbcharact_instance OCCURS 3,
                                           "instances of characteristics
           uebgmat  TYPE matnr,
           uebrblgp TYPE rblgp,
           selkz_db TYPE selkz,
           rblgp_old TYPE rblgp,           "rblgp before aggregation
           END OF mmcr_drseg.
    I retyped this as follows:
    TYPES:
      ty_cobl_mrm_d        TYPE cobl_mrm_d,
      ty_drseg_cr          TYPE STANDARD TABLE OF drseg_cr with DEFAULT KEY,
      ty_drseg_sm          TYPE STANDARD TABLE OF drseg_sm with DEFAULT KEY,
      ty_charact           TYPE STANDARD TABLE OF rbcharact_instance with DEFAULT KEY,
      BEGIN OF ty_mmcr_drseg_co.
        INCLUDE            TYPE ty_cobl_mrm_d.
        TYPES:
          cr               TYPE ty_drseg_cr ,
          unpl_refwr       TYPE refwr,
      END OF   ty_mmcr_drseg_co,
      ty_co                TYPE STANDARD TABLE OF ty_mmcr_drseg_co
                           WITH DEFAULT KEY,
      BEGIN OF ty_mmcr_drseg.
        INCLUDE            TYPE drseg.
        TYPES:
          cr               TYPE ty_drseg_cr,
          co               TYPE ty_co,
          sm               TYPE ty_drseg_sm,
          charact          TYPE ty_charact,        "instances of characteristics
          uebgmat          TYPE matnr,
          uebrblgp         TYPE rblgp,
          selkz_db         TYPE selkz,
          rblgp_old        TYPE rblgp,             "rblgp before aggregation
      END OF   ty_mmcr_drseg.
      DATA:
        x_mmcr_drseg       TYPE mmcr_drseg,
        x_mmcr_drseg_oo    TYPE ty_mmcr_drseg,
        it_mmcr_drseg      TYPE STANDARD TABLE OF ty_mmcr_drseg,
        x_drseg_cr         TYPE drseg_cr,
        x_drseg_sm         TYPE drseg_sm,
        x_drseg_co         TYPE ty_mmcr_drseg_co.
    But here's my question.  To load the new table from the SAP table, I've had to use the code below.  Is there any way to simplify this code?  (I don't think there is because the drseg structure is included in the old and the new, so you can't simply say new-drseg = old-drseg.  But maybe there's another way to do it and I'm not seeing it.  Also, note that I had to loop on each of  the inner three tables because it wouldn't compile when I tried statements of the form "new-table[] = old-table[].)
      LOOP AT e_tdrseg INTO x_mmcr_drseg.
        x_mmcr_drseg_oo-anln1     = x_mmcr_drseg-anln1.
        x_mmcr_drseg_oo-anln2     = x_mmcr_drseg-anln2.
        x_mmcr_drseg_oo-aplzl     = x_mmcr_drseg-aplzl.
        x_mmcr_drseg_oo-arewr     = x_mmcr_drseg-arewr.
        x_mmcr_drseg_oo-areww     = x_mmcr_drseg-areww.
        x_mmcr_drseg_oo-aufnr     = x_mmcr_drseg-aufnr.
        x_mmcr_drseg_oo-aufpl     = x_mmcr_drseg-aufpl.
        x_mmcr_drseg_oo-basme     = x_mmcr_drseg-aufpl.
        x_mmcr_drseg_oo-bedat     = x_mmcr_drseg-bedat.
        x_mmcr_drseg_oo-begru     = x_mmcr_drseg-begru.
        x_mmcr_drseg_oo-bewae     = x_mmcr_drseg-bewae.
        x_mmcr_drseg_oo-ekgrp     = x_mmcr_drseg-ekgrp.
        x_mmcr_drseg_oo-bpmng     = x_mmcr_drseg-bpmng.
        x_mmcr_drseg_oo-bprme     = x_mmcr_drseg-bprme.
        x_mmcr_drseg_oo-bpumn     = x_mmcr_drseg-bprme.
        x_mmcr_drseg_oo-bpumz     = x_mmcr_drseg-bpumz.
        x_mmcr_drseg_oo-bpwem     = x_mmcr_drseg-bpwem.
        x_mmcr_drseg_oo-bprem     = x_mmcr_drseg-bprem.
        x_mmcr_drseg_oo-bsmng     = x_mmcr_drseg-bsmng.
        x_mmcr_drseg_oo-budat     = x_mmcr_drseg-budat.
        x_mmcr_drseg_oo-bukrs     = x_mmcr_drseg-bukrs.
        x_mmcr_drseg_oo-bwtar     = x_mmcr_drseg-bwtar.
        LOOP at x_mmcr_drseg-cr INTO x_drseg_cr.
          APPEND x_drseg_cr TO x_mmcr_drseg_oo-cr.
        ENDLOOP..
        LOOP at x_mmcr_drseg-co INTO x_drseg_co.
          APPEND x_drseg_co TO x_mmcr_drseg_oo-co.
        ENDLOOP..
        LOOP at x_mmcr_drseg-sm INTO x_drseg_sm.
          APPEND x_drseg_sm TO x_mmcr_drseg_oo-sm.
        ENDLOOP..
        x_mmcr_drseg_oo-charact   = x_mmcr_drseg-charact.
        x_mmcr_drseg_oo-uebgmat   = x_mmcr_drseg-uebgmat.
        x_mmcr_drseg_oo-uebrblgp  = x_mmcr_drseg-uebrblgp.
        x_mmcr_drseg_oo-selkz_db  = x_mmcr_drseg-selkz_db.
        x_mmcr_drseg_oo-rblgp_old = x_mmcr_drseg-rblgp_old.
      ENDLOOP.

    Hi
    I don't think, I'm agree with you, u can only replace some statament:
    LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
      X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
      X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
      X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
      X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
      X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
      X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
      X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
      X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
      X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
      X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
      X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
      X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
      X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
      X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
      X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
      X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
      X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
      X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
      X_MMCR_DRSEG_OO-CR[]      = X_MMCR_DRSEG-CR[].
      X_MMCR_DRSEG_OO-CO[]      = X_MMCR_DRSEG-CO[].
      X_MMCR_DRSEG_OO-SM[]      = X_MMCR_DRSEG-SM[].
      X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
      X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
      X_MMCR_DRSEG_OO-UEBRBLGP  = X_MMCR_DRSEG-UEBRBLGP.
      X_MMCR_DRSEG_OO-SELKZ_DB  = X_MMCR_DRSEG-SELKZ_DB.
      X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
    ENDLOOP.
    If you want to use APPEND statament u need to refresh the target table at very loop:
    LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
      X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
      X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
      X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
      X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
      X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
      X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
      X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
      X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
      X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
      X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
      X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
      X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
      X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
      X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
      X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
      X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
      X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
      X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
      REFRESH: X_MMCR_DRSEG_OO-CR,
               X_MMCR_DRSEG_OO-CO,
               X_MMCR_DRSEG_OO-SM.
      APPEND LINES OF: X_MMCR_DRSEG-CR TO X_MMCR_DRSEG_OO-CR,
                       X_MMCR_DRSEG-CO TO X_MMCR_DRSEG_OO-CO
                       X_MMCR_DRSEG-SM TO X_MMCR_DRSEG_OO-SM.
      X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
      X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
      X_MMCR_DRSEG_OO-UEBRBLGP  = X_MMCR_DRSEG-UEBRBLGP.
      X_MMCR_DRSEG_OO-SELKZ_DB  = X_MMCR_DRSEG-SELKZ_DB.
      X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
    ENDLOOP.
    Max

  • When i first created my itunes account it selected the local country i lived in, now i have changed countries and it does allow me to buy any apps as the credit card is not valid in that country. what do i do?

    When i first created my itunes account it selected the local country i lived in, now i have changed countries and it does allow me to buy any apps as the credit card is not valid in that country. what do i do?

    You will need to sign into your account using the iTunes app on your Mac or PC and change the region/country for your account. If you do not have a bank card for the new country, you should be able to make purchases with iTunes Gift Cards if they are available in the new country.

  • How to follow a question and not a whole community?

    How to follow a question and not a whole community?
    THanks.

    If that's not the problem turn off all the blue checks and bookmark the question. To view tap your name then bookmarks, unfortunately with this method you don't get the email updates.
    Michael Vallance

  • I need to change countries but the system won't allow because of an outstanding 7 cents credit balance.  What do I need to do?

    I need to change countries but the system won't allow because of an outstanding 7 cents credit balance.  What do I need to do?

    You can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT1918 I need to change countries on my account but I can't because I have 98 cents left on my account and there is nothing I can buy for 98 cents. What do I do?

    I need to change countries on my account but I can't because I have 98 cents left on my account and there is nothing I can buy for 98 cents. What do I do?

    1) Buy something and charge the balance to a credit card.
    or
    2) Contact Apple and ask them to remove the balance.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

  • How get rid of iTunes credit to change countries

    I have only 1.07 Dollars left in my iTunes account and I want to change countries, but it won't let me because of the 1.07 Dollars. Can anyone tell me what I should do?

    Try this:
    http://support.apple.com/kb/HT1311

Maybe you are looking for