Follow up question to my earlier post

If, when I try to print, I see the message "Library/Printers/hp/cups/inkjet4.driver failed" after having installed Apple's HP Printer Driver v3.0 on my iMac purchased in 2011 (and used with my HP Photosmart eStation c510 purchased in 2011), what does that mean? What do I need to do?
Thank you.
Patrick R. Hanke

Hi @PatrickHanke,
I see you are experiencing a error message when trying to print. I will try my best to help you out.
Depending on what operating system you are on, you can download the HP software from this URL. If you you are on 10.9, run the Apple Updates to install the printer.
HP Photosmart eStation All-in-One Printer - C510a Drivers.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Run the installation.
Then check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name.
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Test the printer.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

IMovie and external hard drive: follow up question

This is a follow up question from the iMovie 6 forum. Hopefully, this question will help the poster on that forum as well. I, too, am working on multiple iMovie 5.0.2 projects at the same time and am running out of hard disk space. I would like to transfer remaining miniDV tape to an external hard drive and, when finished, transfer these clips from the external hard drive to the current iMovie project in my Powerbook, one project at a time. Is this possible ? Will I transfer files from the external hard drive to the Powerbook hard drive and then to iMovie, or directly from the external hard drive to iMovie ? Do I have to format the external drive to Mac OS Extended as advised in iMovie 6 forum in order to transfer miniDV tape to the external hard drive ? When pressing the erase tab to format the external hard drive, will this erase files already on the hard drive before formatting ? Can I transfer projects I am not working on from iMovie to the external hard drive and then transfer them back to the Powerbook when it is time to work on them ? Sorry about all the questions but I need to think very simple-minded when it comes to computer related issues. Thanks for your help.

I was able to use and store iMovie in the external hard drive using my Powerbook as a monitor, so I presume it is formatted correctly
Sorry, but you cannot assume the drive is formatted correctly. iMovie doesn't tell you the drive format is incompatible with iMovie. (it should, but it doesn't.) Some iMovie project features can be saved and some cannot.
It's easy to check the disk format. In the Finder, click on the drive icon and choose File > Get Info from the Finder menubar. The window that opens shows the disk Format. You want it to say "Mac OS Extended". "(Journaled)" is optional.
With some drives, sometimes even that can be wrong. To be sure, use Disk Utility to check the format. When you click on the drive in the list along the left side of the Disk Utility window, the format is displayed at the bottom of the window.
Always, always, always check the disk format before using a drive with iMovie.
Karl

Console bouncing erratically (earlier post marked answered prematurely)

Sorry about this apparent double post. Asked earlier why Console, opened, and set to bounce, wasn't bouncing. I don't want to add this to the earlier post, since, as it's marked answered, I don't think anyone will notice it there any more.
http://discussions.apple.com/thread.jspa?messageID=8748557#8748557
Saw it bounce a few times after a while and figured all was well, but apparently not. No bouncing again, even when I see there has been a new entry. I'd still appreciate any ideas about why this may be behaving like this. Thanks.

Hi again,
I am puzzled. You had said,
Or start from the OSX installer disc and run both
repair disk and then repair disk permissions
Disc Utility, +when repairing permissions booted from the disc+, found many permissions errors. Booted back afterwards from the Mac HD in Safe Boot, to repair permissions again, it seems all those corrections were reversed, and repairing permissions again, booted regularly, not in Safe Boot, DU found no errors. DU booted from the disc, apparently, has a different idea of permissions from the actual, installed OS.
The following is from DU booted from the OS when it reversed all the corrections made by DU booted from the disc:
Repairing permissions for “Hard Drive”
Determining correct file permissions.
Permissions differ on ./Library/Widgets, should be drwxr-xr-x , they are drwxrwxr-x
Owner and group corrected on ./Library/Widgets
Permissions corrected on ./Library/Widgets
Permissions differ on ./System/Library/User Template, should be drwx------ , they are drwxr-xr-x
Owner and group corrected on ./System/Library/User Template
Permissions corrected on ./System/Library/User Template
Group differs on ./usr/bin/fetchmail, should be 0, group is 6
Permissions differ on ./usr/bin/fetchmail, should be -rwxr-xr-x , they are -rwxr-sr-x
Owner and group corrected on ./usr/bin/fetchmail
Permissions corrected on ./usr/bin/fetchmail
Permissions differ on ./usr/lib/php/build/Makefile.global, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/Makefile.global
Permissions corrected on ./usr/lib/php/build/Makefile.global
Permissions differ on ./usr/lib/php/build/acinclude.m4, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/acinclude.m4
Permissions corrected on ./usr/lib/php/build/acinclude.m4
Permissions differ on ./usr/lib/php/build/mkdep.awk, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/mkdep.awk
Permissions corrected on ./usr/lib/php/build/mkdep.awk
Permissions differ on ./usr/lib/php/build/phpize.m4, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/phpize.m4
Permissions corrected on ./usr/lib/php/build/phpize.m4
Permissions differ on ./usr/lib/php/build/scanmakefilein.awk, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/scanmakefilein.awk
Permissions corrected on ./usr/lib/php/build/scanmakefilein.awk
Permissions differ on ./usr/lib/system/libmathCommon.A.dylib, should be -r-xr-xr-x , they are -rwxr-xr-x
Owner and group corrected on ./usr/lib/system/libmathCommon.A.dylib
Permissions corrected on ./usr/lib/system/libmathCommon.A.dylib
Permissions differ on ./usr/libexec/dumpemacs, should be -r-sr-xr-x , they are -r-xr-xr-x
Owner and group corrected on ./usr/libexec/dumpemacs
Permissions corrected on ./usr/libexec/dumpemacs
Permissions repair complete
The privileges have been verified or repaired on the selected volume
And before all of this, Console, set to bounce, and to bring log to front, crashed. This never happened before. I copied that report, but won't get into that just yet. Will wait to see what happens next.
Thanks.

Why can't I ask any follow-up questions?

Why is my earlier message marked 'Read Only' . . . it's the only one I can find that is. I have follow-up questions, and can't find anything in the Help section that addresses 'Read only'.

deweyrich, I don't know how it got marked as such, but I've fixed it.
Thanks for bringing it to my attention, Jerry.
- Peter

When I type in a question here, all the posts say they were written in 1969! What's with that?

When I type in a question here, all the posts say they were written in 1969! What's with that?

Hello, try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Follow up question about image not looking good in canvas-Shane?

I guess this is a follow up question for Shane....
You wrote this in response to someone a year ago which helped me out.
Shane's Stock Answer #49 - Why is the quality different between what I see in the Viewer and what I see in the Canvas?
Well... the viewer is just that-- a viewer. It will display anything that fcp will recognize as usable video or graphics. The canvas is a viewer too, but at the pixel dimension specified by the settings of your project and sequence.
For example, if your graphic or footage is much higher resolution than your 720x480 DV sequence, FCP is interpolating down your file to fit the settings of the sequence. Usually this makes it look not so hot. DV is a 5:1 compression working with a 4:1:1 color depth. Your pristine picture images and graphics are being crushed.
Same with picture files. HIgh res pics now adopt the sequence settings and will render to those specs, and most likely they are not as high quality.
So, based on your answer, I made an HDV sequence, dropped my DVCPro50-NTSC footage and my tiffs into the sequence and now the stills look great. Is this an okay workaround or do you have another suggestion? I'm worried about this HD sequence taking too long to make a compressed QT from in the end.
Thanks!

Photo JPEG is a good option. But this all depends on what your final output will be. If you are going to make a DVD, then that is SD, so using an HD sequence setting makes no sense. Photo JPEG is good, but not realtime in FCP. DV50 or ProRes NTSC are good options.
Unless you are making an HD master...in which case ProRes 422 for HD is good

View follow up questions in Q&A pod in a threaded or some other related view

Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

A follow up question to Introducing Apple Recommends, Manage Subscriptions, and This Helped Me

In Introducing Apple Recommends, Manage Subscriptions, and This Helped Me it was written
Now anyone can click "This helped me" to say thanks to helpful members. When several people mark the same post, it will earn a gold star and appear at the top of the discussion, so it’s easier for others to find. The poster will also earn five reputation points for a job well done.
Does anyone know (or is it written anywhere) just how many is 'serveral'? Is it decided on the fly? Or does it depend on the phase of the moon?
Will the points be awarded to the poster only once, or if say 100 people mark it as helpful will more then 5 points be awarded?
Sounds like a really good system but it seems that a bit more thought should have gone into it, no? Or at least the explanation could be clearer.
Ciao.
(Another question) Can the original post (this one) get marked as helpful also? Imagine earning points for posting :-)

Howdy GeoCo et al
I sort of agree with this new "Helpie-ette" deal. I wonder why while at this portion of the UX they didn't address the ongoing issue of the "irrevocable nature " of the OP awards of the traditional Green Stamp and Gold Star - I have made the mistake (once) but I see the silliest things marked Solved frequently. THAT is bad for business in that it gives false visual info and false statistical results.
We'll see... BTW, the [People] TAB itself is the only new thing (the CONTROL in the TAB bar) - the URL has always been alive and well if one knew to add " /people "

Follow up question...

I just purchased a Airport Extreme from the Apple Store yesterday. I purchased it to extend/share my iPhone 5 hotspot. I have figured out how to have AEBS join my hotspot, but it does not seem to have access on the Ethernet ports in the back?? This is my needed feature, unfortunately I live in an area that only offers DSL and only 2.5mbps.. . Using my phone I'm able to receive 10-20mbps on LTE/4G, and fortunately for me I have unlimited data on my hotspot. So I'm set for the wireless devices in my home, but struggling getting wired devices working....
Any help will be greatly appreciated!
Thanks,
Tim
Info
iPhone 5 iOS 7.0.4
Windows 8
Linux Ubuntu 12.10
Airport Extreme Base Station, iOS 7.0.4
This solved my question by Bob Timmons on Nov 28, 2013 3:33 PM
No, only the AirPort Express. There are 2 Ethernet ports on the Express. If you need more, you can add an Ethernet switch.
The Express has a special feature called ProxySTA that allows it to join a network and the Ethernet ports will be enabled when it does this.
Might be fun to ask one of the sales guys what exactly ProxySTA is and what it does before you explain it to them. Even the "genius" may not know.
See the answer in context
Follow Up Question----
I asked the apple salesperson about proxySTA, first I got a blank stare then, some nonsense to attempt they knew what it was.
So I picked up the Express, set it up to join my hotspot and it works really well!!! The only problem is the hotspot only allows five connections. The express eats one, that only leaves four! Is there another way to set up the express so it can handle the dhcp so my hotspot only sees the one connection to the express??
Thanks,
Tim

Now please perform a hard reset on the second Express by holding in the reset button for 10 seconds, then release. Allow a full minute for the Express to restart to a slow, blinking amber light.
Make sure that the Ethernet connection from the first "joining" Express goes to the WAN "O" port on the second Express creating a wireless network.
Don't worry about the Double NAT message for now, just make sure that you can now log on to the Internet through the second Express wireless network.
You may need to power off both Express devices and restart the "joining" Express first, then start up the "creating" Express.
Once you verify that everything is working, you can go back in using AirPort Utillty and click to ignore the Double NAT so that a green light will be displayed on the second Express.

Follow-up question on ZXM08U16 table E_TDRSEG (function group XM08)

Rich's suggestion worked (on how to retype the E_TDRSEG table received from MIRO by include ZXM08U16 in the function group XM08.
Before asking my new follow-up question, let me recap the original SAP typing of this table and the way I've retyped it (following Rich's instructions):
The original SAP typing is:
E_TDRSEG TYPE MMCR_TDRSEG
TYPES: mmcr_tdrseg TYPE mmcr_drseg OCCURS 0,
TYPES: BEGIN OF mmcr_drseg_co.
        INCLUDE STRUCTURE cobl_mrm_d.
TYPES: cr LIKE drseg_cr    OCCURS 0,
       unpl_refwr TYPE refwr,
       END OF mmcr_drseg_co.
TYPES: BEGIN OF mmcr_drseg.
        INCLUDE STRUCTURE drseg.
TYPES: cr LIKE drseg_cr OCCURS 0,
       co TYPE mmcr_drseg_co OCCURS 0,
       sm LIKE drseg_sm OCCURS 0,
       charact TYPE rbcharact_instance OCCURS 3,
                                       "instances of characteristics
       uebgmat TYPE matnr,
       uebrblgp TYPE rblgp,
       selkz_db TYPE selkz,
       rblgp_old TYPE rblgp,           "rblgp before aggregation
       END OF mmcr_drseg.
I retyped this as follows:
TYPES:
ty_cobl_mrm_d        TYPE cobl_mrm_d,
ty_drseg_cr          TYPE STANDARD TABLE OF drseg_cr with DEFAULT KEY,
ty_drseg_sm          TYPE STANDARD TABLE OF drseg_sm with DEFAULT KEY,
ty_charact           TYPE STANDARD TABLE OF rbcharact_instance with DEFAULT KEY,
BEGIN OF ty_mmcr_drseg_co.
    INCLUDE            TYPE ty_cobl_mrm_d.
    TYPES:
      cr               TYPE ty_drseg_cr ,
      unpl_refwr       TYPE refwr,
END OF   ty_mmcr_drseg_co,
ty_co                TYPE STANDARD TABLE OF ty_mmcr_drseg_co
                       WITH DEFAULT KEY,
BEGIN OF ty_mmcr_drseg.
    INCLUDE            TYPE drseg.
    TYPES:
      cr               TYPE ty_drseg_cr,
      co               TYPE ty_co,
      sm               TYPE ty_drseg_sm,
      charact          TYPE ty_charact,        "instances of characteristics
      uebgmat          TYPE matnr,
      uebrblgp         TYPE rblgp,
      selkz_db         TYPE selkz,
      rblgp_old        TYPE rblgp,             "rblgp before aggregation
END OF   ty_mmcr_drseg.
DATA:
    x_mmcr_drseg       TYPE mmcr_drseg,
    x_mmcr_drseg_oo    TYPE ty_mmcr_drseg,
    it_mmcr_drseg      TYPE STANDARD TABLE OF ty_mmcr_drseg,
    x_drseg_cr         TYPE drseg_cr,
    x_drseg_sm         TYPE drseg_sm,
    x_drseg_co         TYPE ty_mmcr_drseg_co.
But here's my question. To load the new table from the SAP table, I've had to use the code below. Is there any way to simplify this code? (I don't think there is because the drseg structure is included in the old and the new, so you can't simply say new-drseg = old-drseg. But maybe there's another way to do it and I'm not seeing it. Also, note that I had to loop on each of the inner three tables because it wouldn't compile when I tried statements of the form "new-table[] = old-table[].)
LOOP AT e_tdrseg INTO x_mmcr_drseg.
    x_mmcr_drseg_oo-anln1     = x_mmcr_drseg-anln1.
    x_mmcr_drseg_oo-anln2     = x_mmcr_drseg-anln2.
    x_mmcr_drseg_oo-aplzl     = x_mmcr_drseg-aplzl.
    x_mmcr_drseg_oo-arewr     = x_mmcr_drseg-arewr.
    x_mmcr_drseg_oo-areww     = x_mmcr_drseg-areww.
    x_mmcr_drseg_oo-aufnr     = x_mmcr_drseg-aufnr.
    x_mmcr_drseg_oo-aufpl     = x_mmcr_drseg-aufpl.
    x_mmcr_drseg_oo-basme     = x_mmcr_drseg-aufpl.
    x_mmcr_drseg_oo-bedat     = x_mmcr_drseg-bedat.
    x_mmcr_drseg_oo-begru     = x_mmcr_drseg-begru.
    x_mmcr_drseg_oo-bewae     = x_mmcr_drseg-bewae.
    x_mmcr_drseg_oo-ekgrp     = x_mmcr_drseg-ekgrp.
    x_mmcr_drseg_oo-bpmng     = x_mmcr_drseg-bpmng.
    x_mmcr_drseg_oo-bprme     = x_mmcr_drseg-bprme.
    x_mmcr_drseg_oo-bpumn     = x_mmcr_drseg-bprme.
    x_mmcr_drseg_oo-bpumz     = x_mmcr_drseg-bpumz.
    x_mmcr_drseg_oo-bpwem     = x_mmcr_drseg-bpwem.
    x_mmcr_drseg_oo-bprem     = x_mmcr_drseg-bprem.
    x_mmcr_drseg_oo-bsmng     = x_mmcr_drseg-bsmng.
    x_mmcr_drseg_oo-budat     = x_mmcr_drseg-budat.
    x_mmcr_drseg_oo-bukrs     = x_mmcr_drseg-bukrs.
    x_mmcr_drseg_oo-bwtar     = x_mmcr_drseg-bwtar.
    LOOP at x_mmcr_drseg-cr INTO x_drseg_cr.
      APPEND x_drseg_cr TO x_mmcr_drseg_oo-cr.
    ENDLOOP..
    LOOP at x_mmcr_drseg-co INTO x_drseg_co.
      APPEND x_drseg_co TO x_mmcr_drseg_oo-co.
    ENDLOOP..
    LOOP at x_mmcr_drseg-sm INTO x_drseg_sm.
      APPEND x_drseg_sm TO x_mmcr_drseg_oo-sm.
    ENDLOOP..
    x_mmcr_drseg_oo-charact   = x_mmcr_drseg-charact.
    x_mmcr_drseg_oo-uebgmat   = x_mmcr_drseg-uebgmat.
    x_mmcr_drseg_oo-uebrblgp = x_mmcr_drseg-uebrblgp.
    x_mmcr_drseg_oo-selkz_db = x_mmcr_drseg-selkz_db.
    x_mmcr_drseg_oo-rblgp_old = x_mmcr_drseg-rblgp_old.
ENDLOOP.

Hi
I don't think, I'm agree with you, u can only replace some statament:
LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
X_MMCR_DRSEG_OO-CR[]      = X_MMCR_DRSEG-CR[].
X_MMCR_DRSEG_OO-CO[]      = X_MMCR_DRSEG-CO[].
X_MMCR_DRSEG_OO-SM[]      = X_MMCR_DRSEG-SM[].
X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
X_MMCR_DRSEG_OO-UEBRBLGP = X_MMCR_DRSEG-UEBRBLGP.
X_MMCR_DRSEG_OO-SELKZ_DB = X_MMCR_DRSEG-SELKZ_DB.
X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
ENDLOOP.
If you want to use APPEND statament u need to refresh the target table at very loop:
LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
REFRESH: X_MMCR_DRSEG_OO-CR,
           X_MMCR_DRSEG_OO-CO,
           X_MMCR_DRSEG_OO-SM.
APPEND LINES OF: X_MMCR_DRSEG-CR TO X_MMCR_DRSEG_OO-CR,
                   X_MMCR_DRSEG-CO TO X_MMCR_DRSEG_OO-CO
                   X_MMCR_DRSEG-SM TO X_MMCR_DRSEG_OO-SM.
X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
X_MMCR_DRSEG_OO-UEBRBLGP = X_MMCR_DRSEG-UEBRBLGP.
X_MMCR_DRSEG_OO-SELKZ_DB = X_MMCR_DRSEG-SELKZ_DB.
X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
ENDLOOP.
Max

How to follow a question and not a whole community?

How to follow a question and not a whole community?
THanks.

If that's not the problem turn off all the blue checks and bookmark the question. To view tap your name then bookmarks, unfortunately with this method you don't get the email updates.
Michael Vallance

Processing not possible; follow-on docs do not permit posting - WM

Dear All,
The transaction WAE03, while doing the posting of waste material the following error occured "Processing not possible; follow-on docs do not permit posting"
Please help me out.
regards,
ravi

Hi ravikk,
I suppose you are modifying an entry document, this entry document has a document category (SPRO Environment, Health and Safety ->Waste management -> Disposal Processing -> Basic Settings for Disposal Processing -> Specify Document Categories -> Document Category/Functions Assignment), the document category may have assigned a status profile (the default for waste disposal management is EHS_WMM1).
With the status profile (SPRO - Environmental, Health & Safety -> Waste Management -> Disposal Processing -> Basic Settings for Disposal Processing -> Status Management -> Check, Extend, Set Status Profiles) you can see that has several status number, do double-click in any of these numbers and you will see other screen (Transaction Control), here you see what are you allowed or forbidden when your entry document has this status. You can see the avaliable trnsaction with the menu (Environment ->Transactions), waste management transactions starts with WA* and its description with WA-PRO:.
Back to the initial screen if you push the button 'Object Types' you go to 'Allowed Type Objects' the checkbox 'Waste Quantity' must be checked.
Check this link for more info about system status and user status link
Regards
JCD
Edited by: Juan Carlos Delgado Peña on Mar 5, 2012 3:20 PM

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post wont work as it

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7

Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps.

TS2446 I forgotten your answers, I Verify your identity by answering the following security questions before I can complete your purchase.

I forgotten your answers, I Verify your identity by answering the following security questions before I can complete your purchase.

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

Follow up question to my earlier post

Similar Messages

Maybe you are looking for