Follow up to my SMC update...

Well,
After all that and thinking that the SMC update would have fixed my MB, it didn't. I still get shutdowns, and don't really know what to do. I'll try to see a Genius tomorrow I guess, but this computer is my life, I make my money from it. I really can't do without it for a day. In fact, it just happened on a really important project, and now every time I try to run Logic, 5 mins later I get the shutdown. Grr.

The random shutdown (called "RSD") problem is not related the the SMC update. You need to get the computer repaired.

Similar Messages

SMC Update 1.1 Macbook Pro Retina 15" with Bootcamp Win 7 FPS in Games

I have the 15" Retina Macbook Pro, and I have definitely had issues with framerate in games played on bootcamp windows 7. The game I am testing fps is Rift. I noticed when plugged in, the fps drops significantly compared to when it is not plugged in (on battery.) Running on ultra video settings at 1920 x 1080, when plugged in I am getting between 7 to 15 fps after about 3 minutes of sustained use. When unplugged however I get a sustained 34+ fps.
I installed the two new updates ( OSx 10.8.3 and MBPr SMC Update 1.1 ) in the hopes they would resolve my issue. However I am seeing the same fps problems as before.
Additionally while running the game the fan spins like crazy at all times and the power cord gets quite warm. Upon quitting the game, the fan continues to spin wildly with no end.
Can anyone else reproduce these observations? I had an open ticket with Apple to fix this prior to the update on my machine. I was so excited when I saw the release notes to these two updates as it appeared they would directly address my problems. Unfortunately there has been no significant change. Needless to say, my work order shall remain open...

Hi All,
I tried this and it improved my FPS in games yesterday, still not getting FPS I would desire, but its become playable.
Repasted here from another thread:
My retina MacBook Pro has had terrible graphics performance problems for a couple of weeks. I searched all over various forums and tried everything: resetting SCM, manually selecting discrete/integrated graphics card, deleting graphics kexts, etc. Nothing helped until I found this: https://discussions.apple.com/message/19880198#19880198
Now my rMBP has silky smooth graphics again!
The directions in that post are a little hard to understand so I cleaned them up here:
Step 1: Delete system windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: /Library/Preferences/
Delete the file called com.apple.windowserver.plist
Step 2: Delete user windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: ~/Library/Preferences/ByHost/
Delete all files that start with com.apple.windowserver (On my rMBP, there was one file called com.apple.windowserver.12AFB147-95D6-5C70-8F62-C1E4F2BE81BE)
Step 3: Reset the PRAM (These instructions are from http://support.apple.com/kb/HT1379)
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Hopefully this helps others with bad graphics performance on retina MacBook Pros.
For anyone that wants to check out the problematic plists from my rMBP, here are the files:
http://jherrman.com/slow-rmbp-2012/com.apple.windowserver.plist
http://jherrman.com/slow-rmbp-2012/com.apple.windowserver.12AFB147-95D6-5C70-8F6 2-C1E4F2BE81BE.plist
Jeremy Herrman

MacBook Pro SMC Update 1.6 - Freeze

Hi all,
Facts:
model: MacBookPro8,1
OS: OS X 10.7.5
Story:
i got a Macbook Pro 8,1 (13,3" Early 2011) which worked flawlessly - until yesterday.
Yesterday I decided to install the MacBook Pro SMC Update 1.6 (http://support.apple.com/kb/DL1626) - a bit unusual for me, since i normally wait a few weeks until others tried such an update. I did nothing in parallel on my mac, just the update. After the installation process i rebooted my system to finish the update process, the scm update installation run, everything seemed to went fine.
But shortly after the login process, my System froze and i had to hard shutdown my macbook. The first 3 or 4 attempts to only switch on my computer i got only a flashing indicator led, as usual, but not display output, no start sound, nothing. I waited a few minutes, tried again, the system started to boot until the login window, but i had no time to input my credentials - the system froze again.
Since a got a bit computer experience, it's my day job, i first thought of a bad RAM. So i replaced it with two totally new ones (Corsair Mac Memory) and some older original Apple RAM, but nothing changed. I did the same with the harddisk, even i don't think it's related to a harddrive failure because of the symptoms, while trying to install a fresh OS - the system froze again.
After that i tried everything Apple proposed: SMC reset multiple times, NVRAM/PRAM reset multiple times, but nothing helped in my case.
So the current state is as follows:
- The system freezes everytime, sometimes earlier, sometimes later. But normally within 10 seconds. (I observed, the longer the computer stays off, the later the freeze appears). After a hard shutdown, i've to wait a few minutes to get the computer to display anything.
- I read the log files after installing the harddrive to another computer (it works fine there), but there seems nothing special (i could post it, if somebody need it). The system just stops responding.
I think, it MUST be related to the MacBook Pro SMC Update 1.6, because i had no problems at all before this firmware update, problems started after it.
Is anybody out there, who has another suggestion for me, or has the same symptoms?
G,
NoWay

I have MacBook Pro 13" (mid 2010) and similar problem (gray screen, system not start, noisy fan, etc.)
I applied last SMC firmware update 1.6
as a result I have unworking MacBook Pro.
When I have been looking table http://support.apple.com/kb/HT1237 I am realised that link http://support.apple.com/kb/DL1626 on update for MacBookPro8,1 1.68f99 (SMC 1.6) and for MacBookPro7,1 1.62f7 (SMC 1.6) is same. And then I booted from Installation Disk1 with 10.6.4 and saw that my version of SMC is 1.68f99 instead 1.62f7.
In my opinion it's the main reason of our common problem. Apple released not correct SMC update and this update made briks from our MacBook Pro!!!

Smc update gone wrong???

I have a macbook air 13" mid 2012 with mountain lion, when i tried to install the smc update my fan started to run at full speed, keyboard lights gone, charger light gone, and it wont work without the charger pluss many other things. Any suggestions?

Try recovery mode:
1. Start iTunes.
2. Connect phone to a USB port directly on the computer, not an external hub or keyboard port.
3. Press both home and sleep/wake buttons until the Apple logo appears, then continue pressing the home button alone until iTunes sees the phone in Recovery Mode.
4. Follow the prompts to restore.

Does my MBP need SMC update?

I have just received my new PowerBook Pro 2.33 MHz, running OSX 10.4.8. No apparent problems... Checking my current SMC version, it is 1.14f5.
Here is the catch: Software Update does NOT mention any SMC update, whereas Apple (http://www.apple.com/support/downloads/macbooksmcfirmwareupdate11.html) does suggest updating to version 1.4f12.
So, should I update or not? Appreciate your advise!

Following a recent Apple support article, I have learnt that:
"Firmware updates for Intel-based Macintosh computers may not be displayed automatically using Software Update. If they do not appear in Software Update, they must be manually downloaded from the Apple Support Downloads site."
In turn, I cannot really trust Sostware Update on this, isn't it, and I am back with the original question...
Rμν - ½gμνR = 8πGTμν
Message was edited by: Pink Panther

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

MacBook Air SMC update 1.8 killed keyboard & trackpad? (on MBA 11,2010,1.6C2D,ML)

Hi all,
A bit of a pickle. This is briefly what has happened:
1. Beloved MacBook working fine with Mountain Lion and all updates applied
2. Notified a single update is available so downloaded and applied "SMC 1.8 update for MacBook Air" using App Store
3. On restart no response to trackpad or keyboard (apart from power key)
4. MacBook responds to SMC reset key combination but this doesn't cure the problem, and now the Bluetooth assistant pops up to help me find a keyboard
5. Other key combinations don't seem to work, and no green light on caps lock key
6. NVRAM reset using external keyboard, this doesn't solve the problem
7. With an external keyboard and mouse attached, everything seems to work perfectly, except the built-in keyboard and trackpad
I took it in to my local Apple Store today and their diagnosis software gave everything the green light apart from the internal USB devices. The "genius" advised this is probably due to a faulty trackpad and replacing that would perhaps cure the keyboard as well, especially as it seemed to be partially working at least.
I am out of warranty but I suggested as everything was working perfectly right up to the SMC update then perhaps they might replace my trackpad and possibly top case for free, if there are no signs of water ingress or physical damage when they open it up. They are considering this but I don't hold out much hope! Has anyone else experienced this issue? What would you do in my position?
Thank you for reading this and any responses are greatly appreciated.

In addition, if I try to do a software update I get a similar crash.
Firefox is working as i itunes and MS Office Apps.
What can I do to resolve? Thanks

Macbook Pro SMC update 1.3 will not install

Greetings,
I am having problems getting the latest SMC update to install on my 15" Macbook pro. My built in drive has a boot camp partition, so I understand if the update won't install using that. But When booting off freshly GUID partitioned and HFS+(journaled) formatted Firewire 400 drive (Leopard installed and updated to 10.5.7) SMC 1.3 update will not install and gives same error "Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme." Huh?
I tried the update pushed down by software update, and a manual download.
Current SMC version showing in system profiler as 1.16f10
Anyone else experience this or have any suggestions?

"...hit the hardware start button, get gong, machine starts to boot, something briefly flashes on the screen"
Hi Bob, you have to hold down the start button(5-10secs) until you hear a long tone. Then let go and everything is ok.
You'll also see the progress bar install the update, that is what the brief flash was but because the button wasn't held for a few seconds, it didn't take.
Message was edited by: musashi88

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

MacBook Pro Retina SMC Update 1.1 Won't Install

Hi Everybody. I am having a really annoying problem with my rMBP. I have the update labaled: "MacBook Pro Retina SMC Update 1.1" Available in my Mac AppStore app. After I click update, I get a prompt letting me know that the laptop needs to be plugged in, I hit ok. It downloads (very small file) and asks me to Restart or hit "Not Now". I click restart, the system reboots into a updating page where a status bar quickly completes. The laptop restarts again back to OSX. I open up the appstore and goto the updates page and what do I see? 1 available update: MacBook Pro Retina SMC Update 1.1, like I never did anything to begin with.
My system info is:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro10,1
Processor Name:          Intel Core i7
Processor Speed:          2.6 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          8 GB
Boot ROM Version:          MBP101.00EE.B02
SMC Version (system):          2.3f32
Serial Number (system):          xxx
Hardware UUID: xxx
Please help this is really annoying.

I had the same problem. Tried all the proposed fixes. Nothing worked. This solved my problem:
1. Install a fresh copy of mountain lion on an extern disk
2. Startup from that disk
3. Update to 10.8.3.
4. Restart
5. Open app store, go to updates. You should see the SMC 1.1. update.
6. Click update
7. Restart
Once the update installed (fan will go quickly to max speed during startup) switch back to your internal disk and start up. Now the SMC 1.1. update shouldn't show up in the app store/upadtes.

HT4623 hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphon

hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

I keep getting the following message when trying to update my iPhone: An error occurred while backing up this iPhone (-402636798).

I keep getting the following message when trying to update my iPhone: An error occurred while backing up this iPhone (-402636798) Help

You can not create an iCloud account on a PC, you may create one on an iPad, iPhone or a Mac

Cannot update delivery attributes: the following field(s) are not updatable

Hi. I create in EBS simple Order
Now , my goal is to create a delivery , pick , change shipping quantity and ship confirm. Here is my code
DECLARE
p_sales_order NUMBER := 10014445;
p_line_number NUMBER := 1.1;
p_org_id NUMBER := 308;
l_shipped_quantity NUMBER := 5;
p_api_version_number NUMBER := 1.0;
init_msg_list VARCHAR2(200);
l_commit VARCHAR2(30);
x_msg_details VARCHAR2(3000);
x_msg_summary VARCHAR2(3000);
x_return_status VARCHAR2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(3000);
p_validation_level NUMBER;
v_errbuf VARCHAR2(2000);
v_retcode VARCHAR2(20);
v_released_status wsh_delivery_details.released_status%TYPE;
v_inv_interfaced_flag wsh_delivery_details.inv_interfaced_flag%TYPE;
v_oe_interfaced_flag wsh_delivery_details.oe_interfaced_flag%TYPE;
v_source_code wsh_delivery_details.source_code%TYPE;
v_pending_interface_flag wsh_trip_stops.pending_interface_flag%TYPE;
l_changed_attributes wsh_delivery_details_pub.changedattributetabtype;
l_source_code VARCHAR2(30) := 'OE';
-- Parameters for WSH_DELIVERIES_PUB
p_delivery_name VARCHAR2(30);
p_action_code VARCHAR2(15);
p_asg_trip_id NUMBER;
p_asg_trip_name VARCHAR2(30);
p_asg_pickup_stop_id NUMBER;
p_asg_pickup_loc_id NUMBER;
p_asg_pickup_loc_code VARCHAR2(30);
p_asg_pickup_arr_date DATE;
p_asg_pickup_dep_date DATE;
p_asg_dropoff_stop_id NUMBER;
p_asg_dropoff_loc_id NUMBER;
p_asg_dropoff_loc_code VARCHAR2(30);
p_asg_dropoff_arr_date DATE;
p_asg_dropoff_dep_date DATE;
p_sc_action_flag VARCHAR2(10);
p_sc_intransit_flag VARCHAR2(10);
p_sc_close_trip_flag VARCHAR2(10);
p_sc_create_bol_flag VARCHAR2(10);
p_sc_stage_del_flag VARCHAR2(10);
p_sc_trip_ship_method VARCHAR2(30);
p_sc_actual_dep_date VARCHAR2(30);
p_sc_report_set_id NUMBER;
p_sc_report_set_name VARCHAR2(60);
p_sc_defer_interface_flag VARCHAR2(60);
p_sc_send_945_flag VARCHAR2(60);
p_sc_rule_id NUMBER;
p_sc_rule_name VARCHAR2(60);
p_wv_override_flag VARCHAR2(10);
p_asg_pickup_stop_seq NUMBER;
p_asg_dropoff_stop_seq NUMBER;
x_trip_id VARCHAR2(30);
x_trip_name VARCHAR2(30);
fail_api EXCEPTION;
x_debug_file VARCHAR2(100);
l_ship_method_code VARCHAR2(100);
l_user_id NUMBER;
l_resp_id NUMBER;
l_appl_id NUMBER;
CURSOR c_ord_details IS
SELECT DISTINCT det.source_header_number sales_order,
det.org_id,
det.source_line_number,
det.source_header_id,
det.source_line_id,
det.source_header_type_name,
det.inventory_item_id,
det.requested_quantity,
det.delivery_detail_id,
(SELECT concatenated_segments
FROM mtl_system_items_kfv
WHERE inventory_item_id = det.inventory_item_id
AND organization_id = det.organization_id) ordered_item,
det.organization_id,
det.src_requested_quantity,
det.shipped_quantity,
del.delivery_id,
del.status_code delivery_status_code,
det.released_status pick_release_status,
det.oe_interfaced_flag,
det.inv_interfaced_flag
FROM wsh_delivery_details det,
wsh_delivery_assignments asn,
wsh_new_deliveries del
WHERE 1 = 1
AND det.delivery_detail_id = asn.delivery_detail_id
AND asn.delivery_id = del.delivery_id(+)
AND det.source_header_number = 1199656
AND det.source_line_number = '1.1'
AND det.org_id = 10102
AND shipped_quantity IS NULL
AND NVL(del.status_code, 'OP') <> 'CL'
and det.delivery_detail_id =21439836
/* AND det.released_status = 'Y'*/;
BEGIN
-- Initializing the Applications
SELECT user_id INTO l_user_id FROM fnd_user WHERE user_name = 'MSHAPIRA';
SELECT responsibility_id, application_id
INTO l_resp_id, l_appl_id
FROM fnd_responsibility_vl
WHERE responsibility_name = 'OM Super User - UDS UK';
fnd_global.apps_initialize(l_user_id, l_resp_id, l_appl_id);
FOR i IN c_ord_details LOOP
DBMS_OUTPUT.put_line('Initializing the Application for Shipping Transactions');
-- Mandatory initialization for R12
mo_global.set_policy_context('S', i.org_id);
mo_global.init;
-- Ship Confirming
p_delivery_name := TO_CHAR(i.delivery_id);
DBMS_OUTPUT.put_line('Before Shipping, Calling WSH_DELIVERY_DETAILS_PUB API to Update Shipping Attributes');
DBMS_OUTPUT.put_line('=============================================');
l_changed_attributes(1).delivery_detail_id := i.delivery_detail_id;
l_changed_attributes(1).shipped_quantity := 5;
wsh_delivery_details_pub.update_shipping_attributes(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
p_commit => l_commit,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_changed_attributes => l_changed_attributes,
p_source_code => l_source_code);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
RAISE fail_api;
DBMS_OUTPUT.put_line('Failed to Update the Shipping Attributes');
ELSE
DBMS_OUTPUT.put_line('Successfully Updated the Shipping Attributes');
END IF;
BEGIN
SELECT shipping_method_code
INTO l_ship_method_code
FROM oe_order_headers_all
WHERE order_number = i.sales_order
AND org_id = i.org_id;
EXCEPTION
WHEN OTHERS THEN
l_ship_method_code := NULL;
END;
p_action_code := 'CONFIRM'; -- The action code for ship confirm
p_sc_action_flag := 'S'; -- Ship entered quantity.
p_sc_intransit_flag := 'Y';
--In transit flag is set to 'Y' closes the pickup stop and sets the delivery in transit.
p_sc_close_trip_flag := 'Y'; -- Close the trip after ship confirm
p_sc_trip_ship_method := l_ship_method_code; -- The ship method code
p_sc_defer_interface_flag := 'Y';
p_sc_stage_del_flag := 'Y';
p_sc_create_bol_flag := 'N';
p_wv_override_flag := 'N';
-- API Call for Ship Confirmation
DBMS_OUTPUT.put_line('Calling WSH_DELIVERIES_PUB to Perform Ship Confirmation');
DBMS_OUTPUT.put_line('=============================================');
wsh_deliveries_pub.delivery_action(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_action_code => p_action_code,
p_delivery_id => i.delivery_id,
p_delivery_name => p_delivery_name,
p_asg_trip_id => p_asg_trip_id,
p_asg_trip_name => p_asg_trip_name,
p_asg_pickup_stop_id => p_asg_pickup_stop_id,
p_asg_pickup_loc_id => p_asg_pickup_loc_id,
p_asg_pickup_stop_seq => p_asg_pickup_stop_seq,
p_asg_pickup_loc_code => p_asg_pickup_loc_code,
p_asg_pickup_arr_date => p_asg_pickup_arr_date,
p_asg_pickup_dep_date => p_asg_pickup_dep_date,
p_asg_dropoff_stop_id => p_asg_dropoff_stop_id,
p_asg_dropoff_loc_id => p_asg_dropoff_loc_id,
p_asg_dropoff_stop_seq => p_asg_dropoff_stop_seq,
p_asg_dropoff_loc_code => p_asg_dropoff_loc_code,
p_asg_dropoff_arr_date => p_asg_dropoff_arr_date,
p_asg_dropoff_dep_date => p_asg_dropoff_dep_date,
p_sc_action_flag => p_sc_action_flag,
p_sc_intransit_flag => p_sc_intransit_flag,
p_sc_close_trip_flag => p_sc_close_trip_flag,
p_sc_create_bol_flag => p_sc_create_bol_flag,
p_sc_stage_del_flag => p_sc_stage_del_flag,
p_sc_trip_ship_method => p_sc_trip_ship_method,
p_sc_actual_dep_date => p_sc_actual_dep_date,
p_sc_report_set_id => p_sc_report_set_id,
p_sc_report_set_name => p_sc_report_set_name,
p_sc_defer_interface_flag => p_sc_defer_interface_flag,
p_sc_send_945_flag => p_sc_send_945_flag,
p_sc_rule_id => p_sc_rule_id,
p_sc_rule_name => p_sc_rule_name,
p_wv_override_flag => p_wv_override_flag,
x_trip_id => x_trip_id,
x_trip_name => x_trip_name);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
DBMS_OUTPUT.put_line('Ship confirm has not been Completed For SO => ');
ROLLBACK;
RAISE fail_api;
ELSE
DBMS_OUTPUT.put_line('Ship confirm Successfully Completed For SO => ');
COMMIT;
DBMS_OUTPUT.put_line('Checking the Delivery Status after delivery action API Call');
DBMS_OUTPUT.put_line('==========================================');
SELECT wdd.source_code,
wdd.released_status,
wdd.inv_interfaced_flag,
wdd.oe_interfaced_flag,
wts.pending_interface_flag
INTO v_source_code,
v_released_status,
v_inv_interfaced_flag,
v_oe_interfaced_flag,
v_pending_interface_flag
FROM wsh_trips wtr,
wsh_trip_stops wts,
wsh_delivery_legs wlg,
wsh_new_deliveries wnd,
wsh_delivery_assignments wda,
wsh_delivery_details wdd
WHERE wtr.trip_id = wts.trip_id
AND wts.stop_id = wlg.pick_up_stop_id
AND wts.pending_interface_flag = 'Y'
AND wdd.inv_interfaced_flag <> 'Y'
AND wlg.delivery_id = wnd.delivery_id
AND wnd.delivery_id = wda.delivery_id
AND wda.delivery_detail_id = wdd.delivery_detail_id
AND wnd.delivery_id = p_delivery_name
AND wdd.source_line_id = i.source_line_id;
IF (v_source_code = 'OE' AND v_released_status = 'C' AND
v_inv_interfaced_flag <> 'Y' AND v_oe_interfaced_flag <> 'Y' AND
v_pending_interface_flag = 'Y') THEN
DBMS_OUTPUT.put_line('The Delivery has been Shipped & the Next Step is - Run Interface');
DBMS_OUTPUT.put_line('===========================================');
-- API Call for Submitting Interface Trip Stop
wsh_ship_confirm_actions.interface_all_wrp(errbuf => v_errbuf,
retcode => v_retcode,
p_mode => 'ALL',
p_stop_id => NULL,
p_delivery_id => p_delivery_name,
p_log_level => 0,
p_batch_id => NULL,
p_trip_type => NULL,
p_organization_id => i.organization_id,
p_num_requests => 1,
p_stops_per_batch => 1);
ELSE
DBMS_OUTPUT.put_line('The Delivery has not Shipped Properly');
END IF;
END IF;
END LOOP;
EXCEPTION
WHEN fail_api THEN
DBMS_OUTPUT.put_line('==============');
DBMS_OUTPUT.put_line('Error Details If Any');
DBMS_OUTPUT.put_line('==============');
wsh_util_core.get_messages(p_init_msg_list => 'Y',
x_summary => x_msg_summary,
x_details => x_msg_details,
x_count => x_msg_count);
IF x_msg_count > 1 THEN
x_msg_data := x_msg_summary ||' '||x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
ELSE
x_msg_data := x_msg_summary||' '|| x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
END IF;
END;
But at the stage of updating delivery attributes I get the following error message
Warning: For Delivery Detail 21439836, the following field(s) are not updatable: SHIPPED_QUANTITY.
Why?

Hi Paul
Looks like the authorisation is failing due to a bad registration for some reason.
Would you be kind enough to clear out the registration to ensure we are dealing with a fresh start and no information is being used which may have become corrupt. You may do this by following this procedure;
Remove existing reg details
# usr/lib/cc-ccr/bin/eraseCCRRepository
List /tmp/RegistrationProfile.properties file
# cat /tmp/RegistrationProfile.properties
Attempt re-registration
# sconadm register -a -r /tmp/RegistrationProfile.properties
Send us the full output of the commands above if you would please.

SC Item in Transfer process active - follow on document status not updated

Hi Gurus,
    Follow on document is not updated in SRM after PO creation. Ours is classic scenario (SRM 5.5, ECC6.0) and passed thru the following steps - SC (FFT) created, document approved, sent to SoCo, purchaser assigned vendor and created PO, PO created in ECC.
In SRM SoCo screen displays message 'PO created 45xxxxxxxxxx' successfully. Checked the BE PO 45xxxxxxx that was created successfully.
Ran BBP_GET_STATUS_2 and CLEAN_REQREQ_UP jobs. jobs finished successfully. But status is not updated in SRM. RZ20/SLG1 does not have any errors.
BBP_PD shows following statuses:
     I105   Awaiting Approval         X
     I1021 Created
     I1038 Complete
     I1106 SC ordered
     I1129 Approved
     I1111 Item in Transfer process
                    The last status I1111 is still active.
Any advise are welcome. Not sure if I am missing any OSS Notes.
Regards
Viktor Paul

Hi,
1. Check in table BBP_DOCUMENT_TAB if the entry exists use CLEAN_REQREQ_UP program.
2. If entry in the table not exists then check in transaction BBP_PD if the follow on document ( PO ) Number reserved for
the SC .. then use FM BBP_PD_SC_RESUBMIT.
3. none of these use normal process execute BBP_REQREQ_TRANSFER And then use CLEAN_REQREQ_UP
Thanks,
prasad.s

HT4623 I get a the following message when trying to update to 6.1.3 "Unable to intall update, an error ocurred installing iOS 6.1.3" how do I overcome this?

I get the following message when trying to update my Iphone 4 from 5.1.1 to 6.1.3 "Unable to install update, An error occurred installing iOS 6.1.3". Nothing I do changes this, how do I over come this barrier?

Are you trying to update over the air or via itunes?

Follow up to my SMC update...

Similar Messages

Maybe you are looking for