Follow Up to:  trouble using playlist in Encore 1.5

Refining my question:
Last night I posted a topic/problem regarding the use of playlists in Encore 1.5. The post describes how I've set the menu, buttons and playlist for a DVD project.
Tonight, I took a closer look at the DVD I burned. And,to my surprise, the menus and playlists are actually working fine--if left to just play after I select a button on the menu. The problems arise only when using the DVD player's remote to search or advance to the next chapter point.
For each of my playlists, the search/advance button (i.e., a single tap on the fastforward button) works fine for the chapter points in the playlists first timeline. However, once you've reached the last chapter point in a playlists first timeline, if you press the search/advance button again, it doesn't take you to the beginning of the next timeline in the playlist. It takes you to other timelines...some not even on a given button's linked playlist. I haven't been able to find a consistent logic to where it takes you,
Why doesn't the search/advance button just take you to the next timeline on the playlist? Is there a fix?

>Given item 2 in your response, would you also recommend deleting my project's existing timelines and re-creating them in the order of play?
For maximum compatibility and keeping audience surprises to a minimum, yes. :)
>I've noticed a slight hesitation between timelines as it plays through a playlist. Would re-creating take care of this as well?
It will help to the maximum extent possible in Encore, but the hesitation will never completely disappear. The hesitation is caused by the player's laser having to physically move from one timeline on the disc to another. If those timelines are adjacent on the disc, then that movement is slight and the resulting hesitation *may* become unnoticeable. A lot of this also has to do with the quality of the hardware that is playing your disc.

Similar Messages

  • Trouble using XWD_RAMSTARTUP to connect to RAM DB:Database dbname must remain current

    Trouble using XWD_RAMSTARTUP to connect to RAM DB:Database dbname must remain current...
    I am having trouble connecting to the RAM database. The error I get is
    "In stored procedure XWD_RAMSTARTUP: The following Express Server error occurred: Database GLB must remain current becasue the TEST program is still executing it."
    The express database GLB is the global computing sample given by oracle doc.
    My Test program defined in Express Administrator for GLB has the following code:
    call xwd_meta.init
    call xwd_ramstartup('e:\\Orahome1\\olap\\oes632\\service\\glb.rdc','sampleolap', 'sampleolap')
    call xwd_attachdb('e:\\Orahome1\\olap\\oes632\\service\\glb.db')
    The hyperlink I used is " http://192.168.10.110/Scripts/oowa.exe/ExpSrv632/dbxwdevkit/xwd_init?glb/test "
    the content of the rdc file is
    [PATHS]
    CODE=E:\ORAHOME1\OLAP\OES632\COMMON\
    DATA=E:\ORAHOME1\OLAP\OES632\SERVCIE\
    EXTEND=E:\ORAHOME1\OLAP\OES632\SERVICE\
    [RELATIONAL]
    TYPE=OCI
    INSTANCE=SMSDW
    [DBINFO]
    DBNAME=GLB
    Any help/suggestions would be appreciated.

    Hi,
    > This program connects to database TEST, and reads table MYTABLE in schema MYSCHEMA.
    >
    > I would know if it is possible to select the table name in a dynamic way:
    >
    >   SELECT db_name() INTO :dbn FROM :ptab
    >
    > But this line fails with meesages:
    >
    >  dbdsmss: DBSL99 SQL1087
    >  Must declare the table variable "@P1".   - you have to declare variables in beginning of the program.
    You can select table name dynamic way , but you have to write ABAP code (Selection screen).
    post this question in ABAP forum. you will get more information.
    Thanks
    Siva

  • When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    Hi msclaude,
    Welcome to the Support Communities!  I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201263
    If you can't update or restore your iPhone, iPad, or iPod touch
    You can put your iOS device into recovery mode, then restore it using iTunes.
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
    Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
    If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    I hope this information helps ....
    - Judy

  • I am having trouble using home sharing.

    I am having trouble using home sharing. My brother is able to access my libary but I can't access his. Even though we put in his ID for me to access, it just loads and gives up. Can anyone help me out? My OS is windows vista and my brother's is windows 7.

    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Troubleshooting Security Software

  • Can any explain the following:  Background; my company uses google business app to host our email and calander.   Ok, I just set up a iCal event and invited 3 people.  1 internal claims he never got but it showed on his daughters iPod and she does not ema

    Can any explain the following:  Background; my company uses google business app to host our email and calander.   Ok, I just set up a iCal event and invited 3 people.  1 internal claims he never got but it showed on his daughters iPod and she does not email.

    Hello binbingogoABC,
    Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
    Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
    I'm very grateful that you wrote to us with your concerns.
    Sincerely,

  • Having trouble using escape sequences

    I'm trying to display a Christmas tree, but I'm having trouble using \ before the symbols. It won't compile.
        result.append("      \/\\ " + NEW_LINE);
        result.append("     \/  \\ " + NEW_LINE);
        result.append("    \/    \\ " + NEW_LINE );
        result.append("   \/      \\ " + NEW_LINE);
        result.append("   \-------- " + NEW_LINE);What could be the problem?

    Following your advice, it still won't compile. Sorry, my knowledge of Java is limited at this moment.
        result.append("      / /\ " + NEW_LINE);
        result.append("     /  /\ " + NEW_LINE);
        result.append("    /    /\ " + NEW_LINE );
        result.append("   /      /\ " + NEW_LINE);
        result.append("   -------- " + NEW_LINE);Error message:
    C:\Users\John\Desktop\ChristmasTree.java:18: illegal escape character
    result.append(" / /\ " + NEW_LINE);
    ^
    C:\Users\John\Desktop\ChristmasTree.java:19: illegal escape character
    result.append(" / /\ " + NEW_LINE);
    ^
    C:\Users\John\Desktop\ChristmasTree.java:20: illegal escape character
    result.append(" / /\ " + NEW_LINE );
    ^
    C:\Users\Johnny\Desktop\ChristmasTree.java:21: illegal escape character
    result.append(" / /\ " + NEW_LINE);
    ^
    4 errors
    Tool completed with exit code 1
    Edited by: jvu on Sep 18, 2008 6:25 PM

  • I am having trouble using Facetime. When connecting with known users the connection drops out just as the other person accepts my call

    I am having trouble with Facetime. On answering my call by another party the connection immediately fails

    Hello alancc1942,
    The following article provdies some useful troubleshooting steps that can help resolve such issues with FaceTime.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    Cheers,
    Allen

  • After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

    After a Lion clean install, how do I retrieve my data from external hard drive?
    Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
    Is there a sure way of doing it?
    I have only a few programs that I will have to install myself and that should not be a problem.
    I just want my data, music and photos back where I can use them.

    Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files.  Stuff started moving over at a fast pace but has now seemed to stall.
    I will let it run overnight as there are lots of songs and photos as well as a few movies.
    If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well. 
    The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

  • Follow up task without using the action profile

    Hi,
    Is it possible to create the follow up task without using the action profile? If so, please let me know how we can do that?
    as per the requirements, i have to the custom coding that will automatically create follow-on task triggered by status change on the all the transaction type. Please guide me how can we do that.
    Task details (task id, description), I'm reading it from the custom table.
    Thanks for your help.
    Regards,
    Vaibhav

    Thanks Naresh for the response.
    Not sure if I can use the CRMV_EVENT. Even I'm not aware how to use that. Let me tell what i am doing in the logic.
    - implementing the logic in the badi order_save (method - CHECK_BEFORE_SAVE)
    - get the header and item details using the FM CRM_ORDER_READ.
    - get the status of header / item from the output of CRM_ORDER_READ.
    - compare the status with the custom table (having info of hearder type, item type, status, tast id, task description etc)
    - if status is different, create the task using the details from the custom table.
    now i want to write the logic to implement the last step. Do we have any standard FM where I can pass the task ID and it will create the task? Please help.

  • Is there a way to create a smart folder in iTunes, that contains the most recent (say 10) used playlists?

    Is there a way to create a smart folder in iTunes, that contains the most recent (say 10) used playlists? By having this I would be three clicks (touches from what is recent).
    Thanks

    100s with about 30 folders, comprised on different moods, years, genre, favorites, audiobooks, podcasts. Being accessed from multiple Macs and Apple TVs.

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • My iphone 4 will no longer connect to my Itunes since 7.1.1 update itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected

    my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
    any Ideas cheers

    Try holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891

  • ITunes unable to recognize iPod, error message along the lines if "iTunes has detected an iPod but unable to recognise" I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this

    Hi,
    I am need of help! I have had this issue for a while now and it's becoming frustrating.
    My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
    I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
    Someone please help me fix this problem.
    Many thanks.
    Matt.

    Hi
    So just close iTunes and re-open iTunes thats it and that worked for you?
    When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
    Thanks.

  • McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?

    McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?  I contacted McAfee support and they said nobody else is reporting this issue.

    Wow, life is certainly tough for you.
    S***t happens.  That's why there's a warranty.

  • I'm having trouble using Adobe Reader

    I'm having trouble using or uninstalling Adobe Reader, i get a message when the programme has been anitiated which says Adobe Reader has encountered a problem and needs to close, i went on to Adobe's website and it said try uninstalling Adobe Reader and then re-install it as this sometimes works, i tried un-installing it from the Add or Remove programme but that didn't work either as i got another message telling me that the patch package could not be verified and to make sure i have permission.

    Dear Mylenium.
    Sorry i don't quite understand your reply, What do you need to know?

Maybe you are looking for