Follow up track

Hi,
we have a landscape in which dev,qa,prod are avaialble. now I want to transport the content that is developed in dev to qa, prod and tranining.
so I am thinking of developing two tracks.
1 track with DEV -> QA -> PROD and
one follow on track from QA to TRAINING
1. is it a correct approach?
2. currently we dont have PROD ready yet. so would like to know if it is ok to create a track with DEV and QA as runtime systems and later on extend this track to PROD.
or should the track be defined at once before doing the actual transport
3. in the follow up track, that i mentioned above i.e.
QA -> TRAINING, how can i achieve that, i.e. what runtime systems should i define? I want to remove the consolidation tab in this track, how can i do that?
Please help me in this regard.
Thank you

Hi Sidarth and Helmut,
sorry for delay in replying.
OK, I define only one system when creating a follow on track to my training system. i.e. my training system as a TEST runtime system. why shouldnt I select that as a Production runtime system instead?
while creating a follow on track, which software component should I select, i.e. should I select a software component that I used in main track or completely a new SC.
could you please clarify?
Thank you

Similar Messages

Tracking or Following - What is the difference?

The following is copied from the Jive documentation:
You have two ways to keep important things on your radar: you can follow activity or track it. Tracking is for crucial need-to-know. Following is for keeping up in a looser sense.
Tracking routes activity from individual documents, discussions, and places into your Communications page, where you'll see it alongside @mentions, direct messages, discussions you contributed to, and any other activity that you're directly involved in. The Communications page alerts you of how many new items you have, and also lets you read-track your updates so you can be sure of reading everything that comes in. Click Track in Communications in the Action menu for any item you want to track. To stop tracking it, just click Stop Tracking. The updates you have will stay in your Communications, but no new updates will be shown there.
Following filters your activity stream so you see the people, places, and items you're interested in, but without the urgency of tracking. Just click Follow in the Action menu for any item that interests you. As the people and groups you follow create new documents and make discussions or blog posts, and as documents you follow are updated, any updates about them will flow into your Activity page under Followed Activity. You can use following to keep up with people, places, and documents you're interested in, but not absolutely required to keep up with. To stop following an item, click Following so the button changes to Follow.
Question A: So what is the real difference?
From what I can gather, I have tracking and following buttons all over the place, regardless of whether I read a particular thread or browse spaces.
Does following mean it also follows any new documents that people create? So for instance, let's assume I follow the Database General space, does it mean that not only will I receive notice about documents updates, but also follow all the people and receive notice of anything they do? WTF. Why would I ever want that?
Question B: How can I clean my "Communications List".
Apparently the options to Stop Tracking or Stop Email Notification don't remove items in my Communications space. How to get rid of it? I will end up with a huge list after some time. Please, I don't want that, it becomes useless!
Question C: E-mail clutter
Ever since using the new forum software, my mailbox is cluttering up with notifications of any thread I created or participated. I explicitly select the Stop email notifications button of several threads, but I believe some default needs to be changed here. I do not automatically want any email notifications, unless I specifically tell it to do so.
Conclusion:
It seems following and tracking creates a personal communication space similar to the following picture:
http://en.wikipedia.org/wiki/File:Internet_map_1024_-_transparent.png
(you may need to copy and paste the link to a different browser window as it does not seem to open from the forum space, at least not for me.)
Sorry, I don't need an OTN pocket universe. And besides, it's not my problem, but I hope a couple of month down the road this forum will still be able to cope with all the intercommunication tasks with acceptable performance.
I hope there is just some misunderstanding on my side here, and perhaps I will get used to all the additional info - I will probably never need. But, I think the concept of Watching a thread and having a simple Watch List, used in the previous version, or following a user, was just about enough and a lot easier to understand and manage than the new Tracking or Following concepts or features of this new software. I also used the previous Watch List for bookmarking important links, a feature which is apparently supposed to be under the Browse menu, but disabled.
Message was edited by: Dude
The FAQ, which seems it was updated for the new forum software, desrcribes the term Watches. For instance: "To add a thread to your watch list, click on the Watch This Thread link at the top of the thread page." Is this some work in progress, or obsolete? Where is it?

You have two ways to keep important things on your radar: you can follow activity or track it. Tracking is for crucial need-to-know. Following is for keeping up in a looser sense.
Tracking routes activity from individual documents, discussions, and places into your Communications page, where you'll see it alongside @mentions, direct messages, discussions you contributed to, and any other activity that you're directly involved in. The Communications page alerts you of how many new items you have, and also lets you read-track your updates so you can be sure of reading everything that comes in. Click Track in Communications in the Action menu for any item you want to track. To stop tracking it, just click Stop Tracking. The updates you have will stay in your Communications, but no new updates will be shown there. (Note that if you track a space, you won't also be tracking its subspaces.)
Following filters your activity stream so you see the people, places, and items you're interested in, but without the urgency of tracking. Just click Follow in the Action menu for any item that interests you. As the people and groups you follow create new documents and make discussions or blog posts, and as documents you follow are updated, any updates about them will flow into your Activity page under Followed Activity. You can use following to keep up with people, places, and documents you're interested in, but not absolutely required to keep up with. To stop following an item, click Following so the button changes to Follow.

How to link documents in SD following tables?

Hi All,
I am new to SD and I am a technical person not a business person. But now I have to find out how to link a billing document of type Credit Memo (tcode VF03) with the invoice that originated it. I can see in the document flow of the credit memo (button Display Document flow) all the documents related but... where are those link in the data dictionary? I need the technical part that lays behind this. How can i follow the track of the former documents knowing only one of them?
I hope you can help me experts.
BR. Elena

Elena,
VBFA table is for Document Flow for which you can see all the preceeding Documents.For Example VBRK ( Billing Table) --> LIKP ( Delivery Tabel ) and VBAK ( Order Tabel).Here for Billing Document the Preceeding Document is Delivery and for Delivery Doucment the Preceeding Document is Order.
Hope this clarifies your doubt and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

User tracking not finding any hosts in Ciscoworks LMS 3.1

L.S.
Our test-configuration is as follows:
Application versions:
Ciscoworks LMS 3.1
Ciscoworks Common Services 3.2.0
Campus Manager 5.1.4
We have 31 managed devices in Campus Manager (data has been collected on all),
Edit: All of them show up green in the topology window.
The device are: 2 6509 cores (running IOS s72033_rp-IPSERVICESK9_WAN-M version 12.2(18)SXF8), 1 ASA firewall (running ASA-OS version 8.0.5) and 29 switches (2960 and 3560 models both running ios version 12.2(52)SE). The switches are connected as follows:
User tracking jobs are running normally, but aren't finding any end-hosts or IP phones at all (I suspect around 250-500 hosts+ on these switches)
We are running SNMP v3 on the switches and have added the following configuration items to all the switches:
snmp-server group readonly v3 auth context vlan-1
<repeat for all present snmp-contexts as shown in show snmp context output>
snmp-server group readonly v3 auth context vlan-83
Debugging is enabled in CM->Admin->Debugging Options->User Tracking Server
This is the UT.log file of the last major acquisition:
messages will remian logged to file: D:\PROGRA~1\CSCOpx\log\ut.log
2010/01/13 14:00:01 main MESSAGE ProcessInitializer: Properties will be read from D:\PROGRA~1\CSCOpx\campus\etc\cwsi\ut.properties
I= 0value *.*.*.*
I= 1value 6
I= 2value 1
2010/01/13 14:00:01 main MESSAGE DBConnection: Created new Database connection [hashCode = 10969598]
PartialOrderNode tree dump: time base = VMPSMajor
<root>
    VMPSMajor: <root>
    VMPSMajor:     VMPSMajor.GetXMLData
    VMPSMajor:         VMPSMajor.PingSweep
    VMPSMajor:         VMPSMajor.PopulateFromDCR
    VMPSMajor:             VMPSMajor.GetPortStatus
    VMPSMajor:                 VMPSMajor.GetBridgeTable
    VMPSMajor:             VMPSMajor.Sweep
    VMPSMajor:                 VMPSMajor.GetIpXlateTable
    VMPSMajor:                 VMPSMajor.GetIpv6XlateTable
    VMPSMajor:                     VMPSMajor.GenerateTable6
    VMPSMajor:                         VMPSMajor.GenerateTable
SMFunction evaluation order: time base = VMPSMajor
VMPSMajor.GetXMLData Major
VMPSMajor.PingSweep Minor
VMPSMajor.PopulateFromDCR Major
VMPSMajor.GetPortStatus Minor
VMPSMajor.Sweep Major
VMPSMajor.GetBridgeTable Minor
VMPSMajor.GetIpXlateTable Minor
VMPSMajor.GetIpv6XlateTable Minor
VMPSMajor.GenerateTable6 Major
VMPSMajor.GenerateTable Major
Time base VMPSMajor has 5 major nodes and 3 minor traversals.
log4j:ERROR No appenders could be found for category (CTM.common).
log4j:ERROR Please initialize the log4j system properly.
In classlist loader
In classlist loader processing sub classes
updation done
In classlist loader completed
2010/01/13 14:00:03 main MESSAGE DBConnection: Created new Database connection [hashCode = 12524859]
Calling default
Subnet to SubnetData Map Size :73
2010/01/13 14:01:31 DBConnecton-Reaper MESSAGE DBConnection: Closed Database connection [hashCode = 12524859]
2010/01/13 14:01:31 DBConnecton-Reaper MESSAGE DBConnection: Closed Database connection [hashCode = 10969598]
2010/01/13 14:04:50 main MESSAGE DCRDevWrapper: Closing DCRProxy
I'm slowly getting to a dead end here. What am I missing?

Well, our problem was resolved finally through a weird coincendence after having a websession with a Cisco TAC engineer (TAC case SR 613376661)
We changed the
snmp-server group readonly v3 auth context vlan-xxxx
commands in the switches to:
snmp-server group writeonly v3 auth context vlan-xxxx
that is: use the writestring in the snmp-server groups instead of the read string.
After we changed that, all of the User Tracking mysteriously started working.
As far as I know, the writestring should not be needed, but apparently it is....
Is there any explanation for this?

How to get Motion Tracking Mode to work?

How do I get "Motion Tracking Mode" to work? I click the icon and nothing happens, its like greyed out.

scouterbsa
Here is my check list for you to review regarding using Motion Tracking Mode in Premiere Elements 10 on Windows 7 64 bit.
1. You need a video and with enough motion in the object in it to track it. Color contrast between the object and its background can be important to success.
I created a DV AVI 4:3 in which I have a circle moving, and I have used a butterfly Clip Art from Premiere Elements 10 to track to track the circle as it moves in the video. In this example, you see the object only at 0 time.
2. Select/highlight the clip on the Timeline. And then click on the Motion Tracking Mode icon above the Timeline.
You should next see the following Motion Tracking dialog asking for a Yes or No to the question "Run
Auto-Analyzer to track moving objects?" Click No.
3. At this point, you will see a bounding box on screen. That bounding box should be placed using the mouse cursor on the object
that is going to be tracked, in this case, the circle. Resize and position the bounding box accordingly.
4. Once you have the bounding box on the object and resized, click on Track Object at the top right of the monitor.
The screenshot below shows only the before clicking Track Object at the top right of the monitor.
When that action is finished the bound box edges will be an orange yellow color. I have skipped over a screenshot
for the latter.
5. With the orangel yellow bounding box in place, next drag the Clip Art (in this case, Butterfly 02) from the Clip Art display area toward and into the orange yellow bounding box frame. The orange yellow bounding box frame will turn blue. That is the first sign of success.
Hit the Enter key of the computer main keyboard and watch the results. The Butterfly should track the circle's
movement in the clip. The duration of the clip and the continuity of the object's motion in the clip can be other factors.
If you do not succeed, try again with a different video clip (one with more movement and color contrast.
The above is a best case scenario. If it is speech bubbles that you are having problems with as well, we will deal with them next.
Right now it seems like you are having problems getting started rather than having a problem with a specific Clip Art that you are
using to track the object in your video.
We will be watching for your results.
ATR

Problem with Embedded Event Manager and Object Tracking

Hi,
I have a 2801 running c2801-advipservicesk9-mz.124-24.T2.bin. It has the following configuration:
track 300 list boolean or
object 10
object 11
object 12
object 13
event manager applet clear_ipsec_tunnel
event track 300 state down
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
My problem is that after the tracked object number 300 transitions from an up state to a down state, nothing happens. It seems like the applet doesn't work with object tracking. Here's what I see in logs:
Dec 7 21:52:32.236 MCK: %TRACKING-5-STATE: 12 ip sla 12 reachability Up->Down
Dec 7 21:52:37.236 MCK: %TRACKING-5-STATE: 13 ip sla 13 reachability Up->Down
Dec 7 21:52:57.236 MCK: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
Dec 7 21:53:07.236 MCK: %TRACKING-5-STATE: 11 ip sla 11 reachability Up->Down
Dec 7 21:53:07.996 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
That's it. For some reason, the applet won't execute the CLI commands when the EEM applet is triggered. Am I doing something wrong or I have encountered some bug? Thanks.

jclarke,
Today I added the router into the tacacs server database and the applet started working just fine by using my login name. So the working configuration looks like this:
event manager session cli username "my login name"
event manager applet clear_ipsec_tunnel
event track 300 state down maxrun 30
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
Then I tried to use a login name from the local database that has "privelege 15" access and of course the debug output showed me this:
Dec 8 18:12:58.203 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
Dec 8 18:12:58.203 MCK: fh_track_object_changed: Track notification 300 state down
Dec 8 18:12:58.203 MCK: fh_fd_track_event_match: track ED pubinfo enqueue rc = 0
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: msg_type=64
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: sval=0
Dec 8 18:12:58.219 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_open called.
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>enable
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Command authorization failed.
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>clear crypto session
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : ^
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : % Invalid input detected at '^' marker.
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel: IPSec tunnel has been cleared by clear_ipsec_tunnel applet
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_close called.
So I guess this problem arises when you have command authorization enabled and the tacacs server is not reachable or something like that. I have tried to find a way to use the local database instead of using the aaa server but didn't succeed. Although I have found an interesting workaround. Here it is:
Link: http://blog.ioshints.info/2007/05/command-authorization-fails-with-eem.html
Workaround found after reading the "Executing IOS commands from Tcl shell" from the "Tclsh on Cisco IOS tutorial".
On the above article it is mentionned that the ios_config command is executed inside the context of another VTY line (also found with the AAA debug). The workaround is to define the FIRST VTY line with "transport input none" to prevent ssh or telnet to grab it and to configure the aaa authorization without any command authorization for this line.
Kind regards
Christian Chautems
Looks great, but I am not quite sure how to "configure the aaa authorization without any command authorization for this line".
Anyway, jclarke thank you so much for taking your time to look into my problem and for your help.

Can't select 'motion source' in AE CC while attempting to do motion tracking.

Hey all,
I'm new to AE, and am trying to do some motion tracking following this tutorial: https://library.creativecow.net/articles/devis_andrew/AE-Basics-53-Motion-Tracking-1/video -tutorial I linked in a clip (GoPro 4k as .mp4) from PP, created a Null layer and opened up the tracking panel, but the selection for my video file "GOPRO###" and "Null 1" are grayed out. I double clicked on the GOPRO### files in the timeline, which I'm assuming opened it in a new comp. From here I was able to complete the tracking, but then I have no clue on how to link this new comp back into premiere.
If anyone can tell my why all my motion source choices are grayed out, I would appreciate it.
Also, how would I add a .PNG file as the object that is following the tracking? Do I just add the .PNG as a layer, and set it's parent to the Null 1 layer?
Thanks!

When you double-clicked on the layer in the comp, you opened a LAYER window. That's the only window where tracking can take place. Once you have a good track, you APPLY it to a layer in the comp.
If I were you, I'd go over that tutorial a couple-three more times. Andrew spells things out pretty clearly in his tutorials.

Spacific Orchestration not tracking data

When I right click on a suspended service in the Group hub and select orchestration Debugger HAT opens but I get the following error:
"Tracking database doesn't have any records about the selected service instance yet."
I have waited hours and get the same message. I am not having issues with other orchestrations. From what I can see all the jobs under SQL agent are enabled and running without
issues. I check my orchestration and it is set to track all data and the host has tracking enabled. Reboots did not help.
Any help would be appreciated
Thanks
Tom

Hi,
Please see the link http://mysoftskill.blogspot.com/2009/11/biztalk-tracking-database-doesnt-have.html and http://www.eggheadcafe.com/forumarchives/biztalkorchestration/Jul2005/post23246847.asp.
The error message is similar. Make sure your host instance is running and working properly and your orchestration is also running. Also check if you see any information in the event log.
Regards,
Tariq Majeed
Please mark it as answer if it helps

Following option is really working?

Hi Admins,
First of all Happy Friday.
Recently around 3 or 4 weeks before, I have enabled option "Unfollow" to "Follow" for the Data Guard questions (Data Guard).
I feel, If we click follow.. Further if anybody asks question or post answer, we get intimated by email. Isn't it? (or) its my wrong assumption?
But am not receiving any of the email, Even though i can see threads are coming into queue. Can you please add your comments about my assumption on Follow/unFollow?
Thanks.
CKPT

Whether following will send you email notifications depends on your Profile Preferences. You can click on the down arrow at Welcome, CKPT to change the settings.
Send me email notifying me about:
People, places and content I'm following (Followed Activity)
All activity
Never
I have it always set to Never and instead use the
Receive email notifications
link or button showing up on the right under Actions.
Perhaps you will find the following useful:
Tracking and Following in a Nutshell (Guide)

MOTION TRACKING PROBLEM WITH ADJUSTMENT LAYER

Hi.
I'm trying to blur out a logo on a shoe, but I'm having some difficulty getting the tracker to stick to the logo. Can someone help me, please. Here are the steps I took:
1. I used Tracker to track a logo that I want to blur out.
2. After analyzing the layer, I went back to check the attach point frame by frame The attach point is centred perfectly on the logo on every frame.
3. Then, I added an adjustment layer, and used the pick whip to ensure that the position of the adjustment layer is the same as the attach point position from the tracker.
4. On the adjustment layer, I created an ellipse mask, applied a gaussian blur. But when I do playback, the ellipse mask is all over the place and not sticking to the logo.
Does anyone have an idea as to what I'm doing wrong? Any advice would be appreciated. Thanks, in advance.
2010 Mac Pro. After Effects CS5. Snow Leopard 10.6.6.

To start off I always apply tracking data to a null then parent the null to the layers that should follow the track.
Make sure that you have picked the right target. Make sure that you've picked the right options. You should be using Transform as the track type. You should also do a quick Google search. There are a bunch of tracking tutorials out there.
If your null follows the object then you can parent the adjustment layer to the null. That should do it.

Tracking clone stamp tool

Hey..!
How do I track a clip and get the clone stamp tool to follow that track? Even if the object that I'm tracking is in a different place that the spot I'm trying to cover?
I'm looking for some kind og expression to get the position of the clone tool to follow a Null or something along those lines..?
Thanks
/Per

Expressions for this kind of thing are very difficult and nearly impossible if there is a lot of movement and perspective change in the shot. Here's why. Let's say your shot was taken with the camera very close to the clock panning from left to right to center the clock. With the camera very close to the subject as the camera clock starts to come into frame the distance between the left and right side of the base is much shorter than it is when the clock is centered in the frame. This means that you must track scale and position and make adjustments to your clone position based on the change in scale as well as the change in position. If you throw in horizon angle changes like you would get if the camera was tilted to the left as well as panned to the left but straightened (or the shot was hand held and the horizon didn't stay level) then you would also have to track and make adjustments for rotation. Now you start getting into trigonometry. Lastly, you run into problems that crop up with the distance and angle of the original sample. because there are no controls to modify the location of the source. If your source is 100 pixels to the left and 50 pixels above the clone position it will always be 100 pixels to the left and 50 pixels above the sample point. If the perspective and scale changes then your source will change and the clone image will change.
Now that you understand the problem I'll show you how to use an expression to offset position from a track point. I will assume that there is no rotation in the shot.
This is how you approach the problem. You'll need to collect data from the tracker position (t), the scale change (ts), the initial position of the clone (ip), the offset between the clone position and the tracker position at the first frame (ofst), then you will have to calculate the change in offset or adjusted offset (aofst) as the scale (ts) changes by multiplying the offset (ofst) by the scale (ts), then you will have to calculate the new position by adding the adjusted offset to the track position. Here's the expression and it assumes that you have applied tracking data to a null you have named "Tracker":
t = thisComp.layer("Tracker").transform.position;
ts = thisComp.layer("Tracker").transform.scale/100;
ip = t.valueAtTime(0);
ofst = (value - ip);
aofst = [ofst[0]*ts[0], ofst[1]*ts[1]];
np = t + aofst;
Line 2, track scale is divided by 100 to convert percentage to a decimal so the multiplication in line 5 will give the right result.
Line 3 uses the value at time function to retrieve the position of the tracker at the start of the comp.
Line 4 calculates the offset by subtracting the value of the property, the clone position from the initial position of the tracker.
Line 5 adjusts the offset by multiplying the offset by the percentage. You have do to this calculation inside an array because scale and position are both arrays.
Line 6 simply adds the adjusted offset to the tracker position.
If there was rotation to throw into the mix you would have to use trigonometry to calculate the x and y offset based on the angle between the tracker position and the clone position. This would be fruitless because the offset position of the source for the clone would not change. In my example it would always be 100 pixels to the left and 50 pixels above the position of the clone.
A better solution with a moving shot would be to use the Motion Tracker to stabilize the shot removing the movement rotation and scale, applying that stabilization to the shot, duplicating the shot and naming the duplicate Clone, then using the original stabilized footage as the source, do the repairs with the clone tool, then set the clone to paint on transparent and drag that into your main comp and remove the stabilization using a null and a couple of expressions and a duplicate of your stabilized footage.

Shuffle refuses to play tracks in numerical order - help!

I use my Shuffle to listen to audiobooks.
If the audiobook tracks are numbered Track 1, Track 2 .... Track 15 (say), then it insists on playing them in the following order:
Track 1
Track 10 to Track 15 (!!!)
Track 2
Track 3
Track 4
etc
This can ruin a good book and cause great confusion!!
How can I get the Suffle to play the tracks in numerical order?
PC Windows XP

Thanks, Michael.
For a while, I just could not see how to rename the tracks in iTunes.
I now know how to do it.
* Select the song you want to edit, then choose File > Get Info.
* Click Info.
* Make changes to the song information
* Click OK.
I shall try this.
I'm also going to see if 'Copy to Play Order' makes any difference.
Thanks.

My touch5.1.1 will not play album tracks in order. I've turned off the shuffle function and I lock the screen when I'm walking with it, but it won't play tracks in sequence. What can I do?

My Touch 5.1.1. has worked just fine until recently. I have checked to see that it is not set for "shuffle" and also that the "shake to shuffle" function is turned off. When I walk with the device, I lock the screen (all practices I've always followed), but tracks and even multiple discs for albums constantly shuffle. Please help!

Quickly Triple tap the home button to de-activate VoiceOver.

Engaging audio tracks for recording

I'm using multiple instruments to record drums, but whenever I engage multiple audio tracks it doesn't work, example. I'll engage tracks 1 and 2, and then when I go to engage audio track 3 audio track 1 disengages without me doing anything. This will happen in pairs of two, allowing me to only be able to record to audio tracks at a time. Why is this happening and how can I fix it?
G5 2GHZ Mac OS X (10.2.x) 2.5 GB Ram

following jords reply that happens because that's your currently selected inputs,
if your audio interface allows you to have more than 2 inputs if you select 3 and 4,5-6 etc
on the following audio tracks channel strips you will be able to record on more than 2 mono channels and so on.

Interface tracking

Hello,
Please can someone confirm what the following does.
track 1 interface GigabitEthernet0/0/0.1101 line-protocol
ip route vrf V411:test 10.12.0.0 255.255.0.0 10.9.1.10 name test track 1
will this take the static route out of the routing table if interface gig0/0/0.1101 goes down?
i thought the static route will still be removed if the interface goes down?
Thanks

If that's the only interface that route is accessible through, then there really is no point. Many times, the route could be learned from a dynamic routing protocol, but you'd rather use the static first. I have some in this scenario where I use a static route if a loopback is up, but I also learn that route via bgp from another source. I'd rather use the static first, but if the loopback is to go down I want to use the bgp route. My situation is a little different though because I'm pinging through a vpn tunnel to this loopback which means that my route would always be up unless my next hop (which is local to the core switch) were to go down. I track the ping in sla and then track that. My static route points to the track, and when it goes down I can then use the route that's in the bgp table.
So in your example, if the interface goes down and it doesn't have any other way to the route, then the route will leave the routing table. If for some reason, you were want to track the route on the other side of the gateway, I would use sla and track that to verify that the route is up by some other means should the 10.9.1.10 address always be up. Does that make sense?
Sorry for my short response above...I was doing that from my phone...
HTH,
John

Follow up track

Similar Messages

Maybe you are looking for