Follow-up Transactions not Displayed

Hi Experts,
We do have leads with follow-up create opportunity transaction defined in SPRO. In WEB UI, create Lead screen shows follow-up link but on click nothing is displayed. If I click on the existing Lead, and from that displayed Lead I am able to create follow-up opportunity.
Could you please let me know - how to activate follow-up link on main Leads screen.
Cheers,
Peter J.

Peter,
What was the solution to your problem?
I am facing similar issue. I set up copy control for creating a sales order from an opportunity. But when I click on follow-up functions on Opportunity I do not see my sales order type.
Ani

Similar Messages

Following Artists Does Not Display More Than 300 Entries.

Hello, This has been an issue for a long time now, with the web player. The Artists List, Following, etc. do not show more than 300 entries.I follow something 800+, and can't see over half of my 'music collection' on this service. Please for the love of everything; Remove the limit on the scrolling feeds with add more bands as you scroll. I am also becoming quite irate this isn't even being acknowledged. I've had no success in email exchange with support either. Once I told them I am a developer by profession, and have built similar feeds for various sites, they stopped the BS, and flat out ended the exchange. I don't understand.If you want to get my sub $, I want this to work properly. Thanks,

Any progress on this? Still an issue.What is the point of following artists if you cap the display number. I've built these infinite feeds myself, admittedly not in flash, rather json etc. and this should be pretty easy to fix. I'd like to be able to see all the artists I follow, not less than half. Thanks.

Radio Buttons / Check box of Gui Transaction not displaying in WEB UI

HI,
We are using CRM 7.0 / ECC 6.0, i am launching some ECC transaction in WEB UI using transaction launcher, Radio button and Checkbox are displaying properly in Dev CRM system but it is not displaying in Quality system.
I compared both systems, everything is the same. I also checked the ITS URL, we are using transaction IC_LTXE.
/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE&sap-client=100
Please Advise ?.
Thanks & Regards,
Rajanidhi Rajasekeran.

Hi,
We are working on an upgrade project and have used transaction launcher to give SAP GUI transactions in Web UI.
We are facing a similar issue.
We have a report program with several checkboxes. User will select few checkbox and perform further processing.
In development system it is working fine but in quality system if we scroll down or up after clicking on checkbox the page is getting refreshed and check is cleared.
Did you come up with a reasonable solution to this issue?
Do you know any way around this issue?
Thanks in advance
Regards,
Sayan

Portal not displaying all the data for transaction

hi we have a transaction called s_alr_86012326 in the gui...
when we execute the transaction in the gui we can see a lot of data but i am not able to see besides 1 entry thru the portal. any idea why?
besides this there is one more issue...
when i log in with the test id from one another system i am not able to see the iview itself..what happens is that it presents a dialogue box aas the new window opens and prompts me to save a file or cancel it... the file got a strange extension

Hello Ankur,
The Pop Up is coming because you don't have SAP Logon Pad (SAP GUI) installed in that computer. Just installed it and the pop up will go.
Regarding the transaction not displaying data, check ur authorization in backend i.e. check the authorization of the user to which ur portal user is mapped.
Regards
Deb
[Reward Points for helpful answers]
null

JavaScript does not display in Design view

Hi,
I am just starting to learn JavaScript so excuse my, maybe stupid, questions.
Why the following code does not display Hello world! in Split view on the "design" side? When I upload the file onto the server and try to view it in the browser everything displays normally.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Homepage</title>
</head>
<body>
<script type="text/javascript">
document.write("Hello World!");
</script>
</body>
</html>

Hi,
This is normal, design view is simply a way of either creating your website using the wysiwyg method or if you code the website it is a way of getting an idea what the site will look like static. Design view doesn't run any scripts, which is why in the more recent versions of dreamweaver we have LiveView which does run the scripts and allow you to interact with drop down menus and the like, which you can't do in DesignView.
Richard

IBook author review widget questions not displaying correctly.

I have a 5-question review, and after the first question, the following questions are not displayed in their entirety when previewed in iBook. Sometimes there are only 4 characters in the question. Has anyone else have this problem and have a solution?
(I did not have this problem before upgrading to latest iBook author/ibook software.)
Thanks!
RFP

Yes, I'm having problems as well with missing text in the review questions as well as some other formatting issues with floating text boxes and text-wrapping.
My book is in English with Japanese. I'm running on a MacBook Pro (Mid-2010) with OS 10.9.1 and iBooks Author 2.1.1. I have changed the fonts many different times. I've tried adding extra spaces as someone else mentioned elsewhere. I've tried every conceivable mix of layers. I've tried with a fresh new file. All to no avail.
I have put a lot of time and effort into my interactive Textbook and have finally finished. Now these issues are the last remaining before delivery through iTunes Producer.
FYI, I have previewed the book in iBooks (latest version), on an iPad mini retina, on an iPad (4th ten); both as previews and using the exported .ibook format (all on iOS7). The problems persist.

Template not displaying formats correctly

I am running FrameMaker 11 on Windows XP. I am using a template with styles that display correctly on other coworkers' systems. However, the following styles do not display on my system:
Bullet styles: Bullets do not appear for any bullet style.
Note style: The style is set to a bold, all caps. Instead, the text appears in a normal font.
I also copied the following files to my local drive:
\\Program Files\Adobe\AdobeFrameMaker11\Structure\xml\fswue: I copied fswue.dtd, FswueDOCS.fm, and fswuerules.txt
\\Program Files\Adobe\FrameMaker11\Structure: I copied structapps.fm
What can I do to make the template styles to display correctly?
[discussion moved from General forum]

It's best to have your resident expert set this up for you...
You'll need your StructApps file modified to see the new files, then make sure the referenced assets are all installed on your PC.
When done properly, you can reread the structured application via the Structure Tools menu, or restart FrameMaker.
Setting up the environment has a few potential gotchas so if you have someone to help you, use 'em!!
-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 11
[private information removed by host]

Page does not display properly in 3.0.4

If someone from apple reads these postings, the following page does not display properly in Safari 3.0.4 with mac os leopard.
I can not find an email to email directly to you.
http://bigten.cstv.com/sports/m-wrestl/spec-rel/021308aab.html

Hi
Welcome to Apple Discussions
Best way to reach Apple is to send a Bug Report via the Safari Menu>Report Bugs to Apple. While Apple doesn't respond directly to these notes, the information gets in the hands of Software Engineers at Cupertino.
Specific to the referenced site, there are multiple code errors, which would contribute to the rendering problem. Safari is a lot more specific about following correct code than other browsers. I suggest passing the Validation report on to the site developers. Good code practices (W3) makes for better uniformity and security on the Internet.

Not able to create Follow up transaction since it has been grayed out

Hi Experts,
We have a scenario where in we will create the Sales Transactions (OR) in ECC and then it will replicates to CRM.
In CRM we wants to create Returns Order (RE) as a follow up Transaction to OR (which is replicated from ECC to CRM) .
When I tried to create Returns Order (RE) in CRM as a follow up document to Sales Transaction (OR), the follow up Transaction CRM Returns (RE) has been grayed out. I mean it is in display mode only.
And then I created Sales Transaction (OR) in CRM itself and then I tried to create follow up Returns Transaction (RE) I was able to create.
But I am not able to Create Returns Order (RE) for the Sales Transactions (OR) that have been replicated from ECC to CRM.
Can anybody help me in resolving this issue. Any help ful answer will be rewarded with points.
Thanks in advance,
-Frederick Johnson.

Hi Fredrick,
Please check, whether you have completed all the steps for Copying Control for Business Transactions in the following path in IMG:
SPRO->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions:
- Define Copying Control for Transaction Types
In this step, you define the control for copying business transaction types.
To do this, you enter a source tranaction type and a target transaction type, and define the corresponding conditions for this combination.
- Define Copying Control for Item Categories
In this step, you define the control for copying item categories.
To do so, you enter a source item category and a target item category, and define the corresponding conditions.
- Define Item Category Determination when Copying
In this step, you define a specific item category determination which should be run during copying. The item category is used to find the target item category in the source transaction for the transaction type in the target transaction. This means that the transaction type for the source transaction is not relevant for the item category determination.
If the system cannot find an entry for the copying transaction in this table, the item category is found in the target transaction using the normal item category determination.
This might help you
regards
Srikantan

Account Details page transaction link do not display anything

Hi,
I extended the TransactionTableVO to include new columns. Initially, whenever I click on the transaction link, I get an exception error. But I fixed it by commenting out functions that seem to overrride the original one (like setIrSalesOrder, setAmountDueRemainingFormatted etc). It worked for Payment transaction type but not for the other types like Credit Memo, Chargeback, Invoice, Debit Memo, etc.
This Transaction link displays different pages according to the transaction type. I don't have any clue why it worked for Payment transaction type but did not work for the rest. There is no error just blank content.
I opened the original TransactionTableVORowImpl.class and found the following code possibly related to this issue:
public static String getStaticTransactionDetailsRegionCode(InvoiceTableVORowImpl invoicetablevorowimpl, String s)
String s1 = null;
if("INV".equals(s) || "GUAR".equals(s) || "CB".equals(s) || "DM".equals(s) || "DEP".equals(s))
s1 = "ARITRANSACTIONDETAILSPAGE";
} else
if("CM".equals(s))
s1 = "ARITEMPCMDETAILSPAGE";
} else
if("PMT".equals(s))
s1 = "ARI_PAYMENT_DETAILS_PAGE";
} else
if("REQ".equals(s))
s1 = "ARITEMPCMREQUESTDETAILSPAGE";
return s1;
public void setTransactionDetailsRegionCode(String s)
setAttributeInternal("TransactionDetailsRegionCode", s);
I checked the URL and it does contain the correct name of the page i.e. if it's an Invoice transaction type, it includes ARITRANSACTIONDETAILSPAGE in the URL. So it is getting the correct page to redirect to. The window title, however, contains the following:
Message not found. Application: AR, Message Name: nullTitle
Any assistance is greatly appreciated!
N
Edited by: pekochan on 25/11/2009 09:43

I think I'm not passing the correct paramaters. I checked the URL and it's not passing any &Irtransactiontype. How can I check where this parameter is coming from??

MENU item selection does not display drop down in ITS enabled transaction

Hello,
We are experiencing a strange behavior between two portal env.
1. DEV.
For example we have transaction MM01 display in the Portal via ITS (integrated). The end user can select the Menu Tab and the System Tab and the drop downs appear as expected.
2. Prod
Same scenario as above. Only this time, end user is unable to select the button. The Menu and System Tab dont appear greyed out but selecting it does not display the drop down.
Material, Edit GoTo Defaults are some of the links under the Menu tab for MM01.
Very confusing. And this is the behavior in Prod for all transactions. Any ideas on why this is happening would be greatly appreciated.
The architectural difference is that DEV has no Web Dispatcher versus Prod has the Web Dispatcher.
We are on EP 7.0
Many thanks.
Regards,
Sunil

Thanks. Now, I realise this may cause dismay to some, but I have now solved the problem, and just wanted to share my experience with those even less savvy than myself. In Dreamweaver, the Spry css styles are arranged with little or no hint as to which style controls what. I found that there is a rule in the sub-menu styles that controls the little graphic arrows which indicate that there are dropdown subs under the tabs. I had removed these arrows to make way for my background images. However, the rules that control their positioning by percentage were still there, causing my images to display incorrectly. Of course, there was no way anyone could have spotted this and helped me as the fault was in the external spry css file, not the page code. So many thanks to vw2ureg for looking anyway. Regarding the page code, which you have flagged up, would you mind elaborating on what you see wrong here? I'm none the wiser. Many thanks again.

Implementation of Note 660016 for Follow up Transactions in CRM 2007

Hi All,
   We have a requirement to not show all the business activities and tasks available in crm for all the transactions as follow-ups.
   For this reason we implemented the note - 660016. Now its working fine.. It is not showing business acitivities and tasks as follow-up transactions in the CRM GUI and Web UI 2007 for all the transactions.
   But when I create a business activity as a followup for ztransaction in define copying control for business transactions.. It is showing in the CRM GUI but not in the WebUI.
But at the same time when I create a service complaint as a followup for my ztransaction, I am seeing the service complaint as a follow up in both CRM GUI and Web UI.
   Is the implementation of this note restricting business activities and taks in WebUI forever or do I need to write any extra logic or is this any configuration issue ?
Regards,
Raghu
Edited by: Raghu Danda on Mar 8, 2009 1:17 PM
Edited by: Raghu Danda on Mar 9, 2009 5:14 AM

Hi Robert,
   Thanks for your reply
   I checked the link, But I didnt get the full information there.
   Firstly, my problem is not with upgrade and
   the second thing is before implementing the note 660016, I am able to see both in CRM GUI and Web
   UI all the business acitivities and tasks along with other transaction types as follow-up transactions.
   After implementing the note, I am not able to see only the business activities and tasks in the Web UI
   as follow-ups and in CRM GUI, its appearing as follow-ups.
   Hope you got my question now...
   If this is not done in customization I need to code according to my scenario..
   When I kept a break point this class is triggering from another class.
   Do I need to code in the class CL_CRM_UIU_BT_ACT_CUST_GET, according to my scenario.
   Again I have a question here, will you please tell me in which component this class exists, so that I
   will enhance that component.
   Because when I debug after clicking on the Follow-Up button,this class is calling some where
   down...So I am unbale to get the right component for this.
Regards,
Raghu
I

Configuration of product not getting copied in follow up transaction

Hello all,
we are implementing CRM 5.0 . IPC is configured for pricing. After entering products in quotation, I go to configuration tab at item level and configure my product by selecting characteristics. Problem arises when I create a follow up document from quotation. Configuration of individual items that I had done earlier does not get copied in follow up transaction and has to be done again. Is there some setting in IPC/ CRM that will let me copy entire configuration of quotation item?

Hi Sumedh,
there is note 899894 with a detailed description how to customize it the correct way! hope it's helpful!
Regards, Gerhard

Distributed Transaction Coordinator not displaying remotely on a server core cluster node..

We setup a server core single node cluster (W2012 R2). The MS DTC is running, and the Distributed Transaction Coordinator firewall rules are enabled. I can connect to the firewall rules and compmgmt.msc remotely for this server. When
I attempt to connect to the Component Services Management console with this server, the MS DTC object is not displayed. Only the COM+ applications are displayed. We've setup other server core instances with out clustering and DTC is displayed.

Hi Steve,
We just finished the local test and found this behavior is by design. It’s expected that we can’t see the DTC remotely from component services for a cluster node.
In my lab, 2012R2 node3 is a single node cluster and has DTC role.

Item in Transfer Process - Follow on documents status not displayed

Hello experts,
User created a shopping cart of 12 line items (out of that no 3rd is deleted) and PO is created in backend r/3 system.
Now when i see the status of my last item ie 12th line item is "Item in Transfer Process". and for 3rd item which is deleted for that also Status shown PO NO (I1113) i can see that PO no is there when i check follow on document.Problem is i want to change the status of 12th line item with its respective PO no .
Activity done by me to solve
If i manually update the status in the table CRM_JEST then the status will get changed but the follow on document is not displayed evenafter run reports like CLEAN_REQREQ_UP and Get status2. i am trying to run a report BBP_ALERT_SB_NOTTRANSFERED but it got cancelled. even i tried to run a function module BBP_PD_SC_RESUBMIT but short dump will come. i have implemeted a suggested SAP note 729967 but still problem persist.
In BBP_PD and in table BBP_PDBEI field ( BE_OBJECT_ID ) in this field Ponumber is there against that line item.
Thanks
Sunny Sharma

Hi Sunny,
the manual action taken on the transfer is dangerous and can cause even more inconsistency.
Hence you may have changed some tables of the SC manually, I would suggest rather to delete SC items, and create a new SC for them.
Regards,
Peter

Follow-up Transactions not Displayed

Similar Messages

Maybe you are looking for