Followed step by step instructions on Imaging Windows 8.1 tablets using USB drive ad WINPE however it keeps erroring and I get the following log file.
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 DismApi.dll:
- DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 DismApi.dll: <----- Starting DismApi.dll session -----> - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 DismApi.dll:
- DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 DismApi.dll: Version 6.3.9600.16384 - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 DismApi.dll: Parent process command line: "C:\Program Files\Windows Defender\MsMpEng.exe"
- DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Enter DismInitializeInternal - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Input parameters: LogLevel: 2, LogFilePath: (null), ScratchDirectory: (null) - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Initialized GlobalConfig - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Initialized SessionTable - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Lookup in table by path failed for: DummyPath-2BA51B78-C7F7-4910-B99D-BB7345357CDC - CTransactionalImageTable::LookupImagePath
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Waiting for m_pInternalThread to start - CCommandThread::Start
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=3200 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 m_pInternalThread started - CCommandThread::Start
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Created g_internalDismSession - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Leave DismInitializeInternal - DismInitializeInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=3200 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Enter DismOpenSessionInternal - DismOpenSessionInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Input parameters: ImagePath: DISM_{53BFAE52-B167-4E2F-A258-0A37B57FF845}, WindowsDirectory:
(null), SystemDrive: (null) - DismOpenSessionInternal
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Lookup in table by path failed for: DRIVE_C - CTransactionalImageTable::LookupImagePath
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Waiting for m_pInternalThread to start - CCommandThread::Start
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2728 Enter CCommandThread::CommandThreadProcedureStub - CCommandThread::CommandThreadProcedureStub
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 CommandThread StartupEvent signaled - CCommandThread::WaitForStartup
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 m_pInternalThread started - CCommandThread::Start
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 Successfully enqueued command object - CCommandThread::EnqueueCommandObject
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2728 Enter CCommandThread::ExecuteLoop - CCommandThread::ExecuteLoop
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2728 ExecuteLoop: CommandQueue signaled - CCommandThread::ExecuteLoop
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2728 Successfully dequeued command object - CCommandThread::DequeueCommandObject
2014-07-30 10:51:44, Info DISM PID=2012 TID=2728 Scratch directory set to 'C:\WINDOWS\TEMP\'. - CDISMManager::put_ScratchDir
2014-07-30 10:51:44, Info DISM PID=2012 TID=2728 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-07-30 10:51:44, Info DISM PID=2012 TID=2728 Successfully loaded the ImageSession at "C:\WINDOWS\system32\Dism" - CDISMManager::LoadLocalImageSession
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Failed to get and initialize the PE Provider. Continuing by assuming
that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:44, Info DISM DISM Manager: PID=2012 TID=2728 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Loading Provider from location C:\WINDOWS\system32\Dism\FolderProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Connecting to the provider located at C:\WINDOWS\system32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:44, Info DISM DISM Provider Store: PID=2012 TID=2728 Loading Provider from location C:\WINDOWS\system32\Dism\WimProvider.dll -
CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Connecting to the provider located at C:\WINDOWS\system32\Dism\WimProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Loading Provider from location C:\WINDOWS\system32\Dism\VHDProvider.dll -
CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Connecting to the provider located at C:\WINDOWS\system32\Dism\VHDProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Loading Provider from location C:\WINDOWS\system32\Dism\ImagingProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Connecting to the provider located at C:\WINDOWS\system32\Dism\ImagingProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Loading Provider from location C:\WINDOWS\system32\Dism\CompatProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-07-30 10:51:45, Info DISM DISM Provider Store: PID=2012 TID=2728 Connecting to the provider located at C:\WINDOWS\system32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
[2012] [0x8007007b] FIOReadFileIntoBuffer:(1415): The filename, directory name, or volume label syntax is incorrect.
[2012] [0xc142011c] UnmarshallImageHandleFromDirectory:(511)
DISM error's are related to either:
Incorrect packages, that are not intended for the os you are deploying.
Features that need to be set-up by DISM
Parsing the unattend.xml file which holds incorrect parameters.
Please see either dism.log, which you can find on x:\windows\logs\DISM\dism.log during WinPE, or panther.log which you can find here: %WINDIR%\Panther
Cheers!
If this post is helpful please click "Mark for answer", thanks! Kind regards
Similar Messages
-
I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?
Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
Operating System
Default location of iTunes library
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\iTunes\
Microsoft Windows Vista
\Users\[your username]\Music\iTunes\
Microsoft Windows 7
\Users\[your username]\My Music\iTunes\
... and open the iTunes library you find in there. -
Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast:
Exception Name: NSInvalidArgumentException
Description: -[_NSConcreteUserNotification activationType]: unrecognized selector sent to instance 0x25a06b0
User Info: (null)
0 CoreFoundation 0x922216fb __raiseError + 219
1 libobjc.A.dylib 0x920108db objc_exception_throw + 230
2 CoreFoundation 0x9222563d -[NSObject(NSObject) doesNotRecognizeSelector:] + 253
3 CoreFoundation 0x9216af77 ___forwarding___ + 487
4 CoreFoundation 0x9216ad22 _CF_forwarding_prep_0 + 50
5 iTunes 0x00df38e2 iTunes + 14624994
6 iTunes 0x00df36ae iTunes + 14624430
7 libobjc.A.dylib 0x9201c6c5 -[NSObject performSelector:withObject:withObject:] + 77
8 Foundation 0x93c12d85 -[_NSConcreteUserNotificationCenter _sendDelegateMessage:sendToAppDelegate:withNotificationFromMessage:] + 335
9 Foundation 0x93c12eaf -[_NSConcreteUserNotificationCenter _notificationPresentedMessage:] + 58
10 Foundation 0x93c137c2 __block_global_1 + 156
11 libdispatch.dylib 0x9371b2cf _dispatch_call_block_and_release + 15
12 libdispatch.dylib 0x9371ea80 _dispatch_client_callout + 46
13 libdispatch.dylib 0x9371c8e8 _dispatch_main_queue_callback_4CF + 223
14 CoreFoundation 0x9211b255 __CFRunLoopRun + 1829
15 CoreFoundation 0x9211a7c4 CFRunLoopRunSpecific + 308
16 CoreFoundation 0x9211a67b CFRunLoopRunInMode + 123
17 HIToolbox 0x90b6fc76 RunCurrentEventLoopInMode + 242
18 HIToolbox 0x90b76eb9 ReceiveNextEventCommon + 374
19 HIToolbox 0x90b76d34 BlockUntilNextEventMatchingListInMode + 88
20 AppKit 0x97621923 _DPSNextEvent + 709
21 AppKit 0x97621167 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
22 AppKit 0x9761d78c -[NSApplication run] + 855
23 iTunes 0x0017a898 iTunes + 1546392
24 iTunes 0x0017a709 iTunes + 1545993
25 ??? 0x00000002 0x0 + 2Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
updated itunes and now get the following message.
this copy of itunes is corrupted or not installed correctly. please reinstall
what has caused this?
in my downloads folder i have itunes64Setup.exe do I just run this ?
or will this overwrite my existing data and I'll have to set up my library from scratch.
as its an ipod classic with 120 Gb of data i'd rather not have to set it up all againHello barbeedawg,
Thanks for using Apple Support Communities.
I'd like you to please follow the steps in the article below to first remove all instances of iTunes and its associated files, and then reinstall iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Take care,
Alex H. -
I am trying to install software and am getting the following prompt.
"Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT.
How do I repair thisBack up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
ThanksClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192) -
I just installed Itunes on Windows7 x64 and I get the following error...
I just installed Itunes on Windows7 x64 and I get the following error when trying to open it. "Itunes cannot run because it detects a problem with Quicktime. For repair instructions click Help." When I do this all it pretty much tells me to do is reinstall which doesn't really do anything at all. Another method mentioned is to download quicktime as a stand alone installer and isntall that version again to no avail. I have no idea what to do. Thanks for your help. I can provide any information needed upon request. And yes I have uninstlaled completely restarted then reinstalled only to get the error again.
Good lord.
Right. Presumably either this one:
... or this one:
... is at the heart of matters. The second one is the more familiar one. So we'll assume (to begin with) that the first one is a rare complication of the sort of install trouble that can produce the second one.
Rather than using Revo, I'd like to try using the Windows Installer CleanUp utility to clear the installation configuration information for your Apple Software Update. Unfortunately, doing so has become more difficult
ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove". Quit CleanUp.
Now try uninstalling (again without using Revo) iTunes and QuickTime. If those uninstalls seem to go through okay, restart the PC.
Now try the iTunes reinstall again. Does it hang with that "required module" error again? or does it install smoothly this time? -
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?
Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
HT201066 QuickTime: I'm trying to open a .WMV file and I get the following message.
I'm trying to open a .WMV file and I get the following message.
"The document “.wmv” could not be opened. The movie is not in a format that QuickTime Player understands. You may need to download additional software.Two other possibilities.
Video Player - Divx
Video Player - VLC -
icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either on both devices
Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.
-
I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...
Yes. I've found that works best. Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth. Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full. So unfortunately there is a lot of empty space that is needed for smooth operation.
-
i am trying to run a CDrom on my MAC and I get the following message: bdf.classic or bdf.osx not supported anymore. How can I fix this and run my CDrom?
I don't think you can fix it. Those messages imply the programs on the CD are older ones for PowerPC Mac (discontinued in early 2006) and does not have the code a current Intel-based Mac requires.
Maybe you are looking for
-
Can my mini provide ethernet for blu ray player?
i know you can share internet when connected to internet with ethernet, but i want to share my wireless network my mini connects to with my blu ray player. has anyone done this and had it work? is there a trick? thanks for any info....
-
How to scan the downloaded files
I have installed Norton 360 in my computer. I want to scan the files that is downloaded using Norton 360. How to do it? and what .exe should i use?
-
Can I use two different frequencies on a roaming network?
I have a roaming network with a first generation Airport Extreme (i.e., first square model), with a first generation Airport Express connected via cable to make up the roaming network. This is for a detached office that is about 50 feet and several
-
Hello, I received the question to add a button or new field on the standard webdynpro PLM result screen. The user want's to be able to open the OAF from the result screen. (This is standard only possible when selecting a document out of the result li
-
Where can I download acrobat 8 standard (not pro)?
I Am trying to download Acrobat 8 standard but can only find 8 pro on the Adobe site.