Following Driver Update Epson CX6000 will not print

I 'just' posted this on an answered post and now notice a difference, so I'll repost the corrected info here.
I have a CX6000, Snow Leopard, and following the Apple update - no printing.
I think I've tried most of the suggestions above with no luck. THE ERROR MESSAGE IS "rastertoescpll failed".
But, I have a question - do I have to uninstall the old driver prior to installing the new? (Or, does it take the place of the old one?)
So, would I:
1. Delete the old driver
2. Install the new Epson Driver
3. Apply the updater
4. Repair permissions (again) somewhere along the way?
I have a laptop which (again Snow Leopard) which was not upgraded and it prints fine.
Thank you

I'm having the same problem as you but I'm having trouble understanding exactly what you did. I've deleted the old driver and re-installed the latest driver I found from the epson website, but this doesn't seem to work. Can you offer any help?

Similar Messages

Epson rx680 will not print after apple update print driver

I have an Epson RX680 which worked perfectly until I allowed the latest apple update to be installed with newest epson printer driver. It now will not print but comes back with a rasce blah blah error. Tried restoring to the previous software but to no avail.

https://discussions.apple.com/thread/5233149

My Epson 3880 will not print decent prints.

I have a macbook pro I updated to Lion 10.7.4 and now my epson 3880 will not print decent prints! Worked fine before but I cannot load profiles ofr paper now and therefore cannot get quality prints now! I am an artist and this is a large part of my business is there an answer for this issue?
<Re-Titled by Host>

Welcome myazel!
myazel wrote:
... I cannot load profiles ofr paper now ... is there an answer for this issue?
I downloaded a dmg file containing Epson ICC profiles . After running the installer, I found the path to the profiles is
HD/Library/ColorSync/Profiles/EPSON Stylus Pro 3880/
HTH

Epson RX595 will not print since Snow Leopard install

I cannot get my trusty Epson to print since installing Snow Leopard and latest printer drivers.
I can scan. Just cannot print.
I have looked at some troubleshooting support articles. Does anyone have a good link, tip?
Thanks in advance for any help with this!

Try deleting the printer, the <hard drive>/Library/Printers/EPSON folder and the /Library/Caches/Epson folder, and then reinstalling the drivers using Software Update. Then add the printer, making sure that you are using the Epson driver, not the Gutenprint driver.

My Epson 1270 will not print w/CS5

When I try to print Photoshop shuts down. I have the newest driver from Epson and their customer support said to check with Adobe.

Have you installed all the Photoshop updates?
Which OS version are you using?
Does the crash report give any details?

HT204135 epson 3880 will not print a3 from cs6

i am on an old intel mac pro with lion 10.7.5 using photoshop cs6 13.05 64 bit
i can not print a3 i get a cropped a4 shape in one corner of the a3 page
the file will print fine in preview but not through photoshop.
print dialogue says eveything should be ok displays in the window as it should print .
but doest come out
epson 3880

Welcome myazel!
myazel wrote:
... I cannot load profiles ofr paper now ... is there an answer for this issue?
I downloaded a dmg file containing Epson ICC profiles . After running the installer, I found the path to the profiles is
HD/Library/ColorSync/Profiles/EPSON Stylus Pro 3880/
HTH

Epson R1900 will not print or update

Can’t get my R1900 to print. Utility see the printer and will tell me my ink level. But can’t get it to print anything.
Apples Epson update did nothing.
Epson driver installers crash/quit after verifying password. Did the Rosetta thing, tried under safeboot and even tried to install drivers on my MacBook Pro. They still quit. Epson is at a loose and says to ask Apple...
Any ideas people?

The latest R1900 drivers are available via Apple's Software Update. However before trying to download them from there, you should remove all drivers from your system. Here's how to reset your printing system:
1. Control-click or right-click a print queue in the ""Printers"" pane.
2. Choose ""Reset printing system..."" from the contextual menu.
3. Click ""OK"" in the ""Are you sure..."" confirmation sheet.
You can follow the troubleshooting steps in the Apple articles:
http://support.apple.com/kb/HT3669?viewlocale=en_US
http://support.apple.com/kb/HT3771
If all of this doesn't work you can see if the issue is with the user account or system wide by creating a new OSX user account and see if that user has the same issue.
Let me know if any of these steps worked for you.
Syd

Epson RX620 will not print with my MacBook Pro. Error:/ System/Library/ Pri

I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri... can anyone help?

skeeter694 wrote:
I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri...
Welcome to Apple's discussion groups.
What's the rest of that error message? Posting what you did is similar to posting as an error message the text "I'm having trouble with ..." with nothing following.
I'd try several things until things work:
1) Open the Print & Fax panel of System Preferences. Right-click on a printer entry and choose "Reset printing system".
2) Delete the entry for your printer, then add it back.
3) Check the Epson Web site for a recent driver for your printer. Download it, then first run it in "uninstall" move, then in "install" mode.
I'll be personally interested in what you learn. I have a relative who has an RX620 and 10.6.4, but I'm not sure he's tried to print anything yet.

Epson R2880 - Will not print - paper sizes

I am having major problems with trying to print to a R2880. I have recently purchased it and have had problems with printing to it from the beginning. Sometimes it works but mostly it doesn't.
The Epson driver is 6.2 which is the latest. I am running Leopard. Do not want to upgrade to SL cause what I read shows FCS2 does not run on it.
Keeps on telling me that the "Paper source selected in the printer doesn't macy the paper loaded in the printer" which is of course bollocks.
I have tried the solution offered by a previous post which was to got to the print preview and then Cmd - P and then choose the right paper. Worked fine on an A4 but when I did the same for a 10 x 15 cm no go.
It suddenly started working the other day but when I chose a selection of 10 x 15's (varied portrait / landscape aspects) to print it did not orientate them correctly. The paper was installed in a portrait arrangement yet not one of the photos printed on the page correctly.
What a waste of time this printer and Aperture are.
Can anyone help on this most frustrating problem. I have had this printer for a few months and have only managed to print a handful of photos !
Regards

Hi Colin,
The R2880 is a little finicky when it comes to paper source. A couple of questions:
• What paper are you using? What size? Are you using the back tray or the main tray? I had a ton of problems with the back tray and that very error. I now always use the main tray, but it depends on the paper you use since certain types can only be loaded in the back.
• Are you making sure the preset you choose is for +sheet feeder+ and not +roll paper+?
The Preview solution you read about is probably mine and was brought on by SL. Fortunately 10.6.2 fixed that problem but I've still had the paper source error come up a couple of times - I need to open the print settings for the preset I want to use and save it again (it's as though it needs to be reminded that it should use the sheet feeder, even though that setting is saved right there in the preset).
My first thought was that your problem might have to do with the non-conventional paper size, but I also make custom 16x12 prints on 13x19 paper and don't have problems at all.
I'm guessing it's probably a combination of settings and paper type...

Epson R2880 will not print borderless in PE8 or Lightroom

Why won't my Epson R2880 print borderless in PE8 or Lightroom 3 when it will with Epson Easy Print. I am using OSX 10.6.8 and the Epson driver 8.6

Hope these are helpful, sorry if i misunderstood.

Epson R340 will not print higher quality photo - Jobs Stopped!

I have seen posts on this problem before but I've tried the recommendations and haven't had any luck. From IPhoto 5 (version 5.0.4) I can print regular resolution photos but if I switch to the higher resolution photos the printer stops printing. If I restart printing it says "Opening Printer Connection" and then again "Jobs stopped".
It is very frustrating since I have printed the higher resolution photos before with the same software, drivers, etc. but I cannot repeat it every time.
I have tried verifying and repairing disk permissions but it did not work. I have also tried all combinations of Advanced Options - Print Setting along with the Presets.
Help!
Mac Mini 1.42 GHz Power PC G4 Mac OS X (10.3.9) 512 MB DDR SDRAM

I reinstalled the drivers from the original set-up disk (didn't do anything)
I reread the Help topics and noticed that Epson had set the Presets to "Standard"
I noticed that in the ColorSync Utility the default preset was "Standard", so...
I set the "Format for:" to "Stylus Photo R340"
I then changed the "Paper Size" to "4x6 (sheet feeder - borderless)"
- I used to have it as a custom 4x6 size - this may have been the problem
Then I went into the Print menu from iPhoto and checked to see that the
Preset was "Standard"
From there I went into "Advanced Options" -> "Print Settings" and changed the Mode from "Automatic" -> "Speed" to "Quality"
I hit print and out came the higher resolution, higher quality photos.
Thanks for helping - I think you put me on the right path.
Mac Mini 1.42 GHz Power PC G4 Mac OS X (10.3.9) 512 MB DDR SDRAM

Since Snow Leopard epson RX680 will not print CD labels and color bad

I have tried everything recommended, all udates and drivers and etc... no luck printing on CDs. Can anyone help me? I cannot afford a new printer.

i have the exact same problem, i even rang and emailed epson, no luck, iv'e tried all the updates, even changed thin ink as i thought low ink could be causing the problem, it just doesn't let you click on print, grrrr have you had any luck??? i have the epson rx700w, but it uses the same print cd software...

Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

Epson Stylus CX7300 will not print after software update

After doing the latest update for my Epson Stylus CX7300 printer it will not print. When i open the printer utility it comes up with a communication error. I can still scan documents but i can't print or even print a test page, check ink levels etc.

Hi Kerry Bonney,
Welcome to the Apple Support Communities!
If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Have a great day,
Joe

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

Following Driver Update Epson CX6000 will not print

Similar Messages

Maybe you are looking for