Following error occurring when running application in wireless tool kit
Hi
Following error occurring when running application in wireless tool kit
java/lang/ClassFormatError: Bad version information.
can any suggest y ?
Hi,
I am also facing the same problem......................
java/lang/ClassFormatError: Bad version information
The error occurs when I try to simulate the mobile device using wireless tool kit. Does it have anything to do with the antivirus/firewall running on my system?
Did Ram get a solution to his problem? Can anybody please help?
Many Thanks
Merin
HI
Sorry i could not find any related information there
the version of wireless toolkit i am using is 2.1
well in release notes its given that it also
supports cldc1.0 and midp1.0
presently i am using cldc1.0.4 and midp1.0.3
versions
is there any version compatability error
please suggest me its quite urgent
Similar Messages
-
A critical program error occured when running a workbook
Some end users get a critical program error occured when running a workbook when they want to make selections.
In the trace they get the following message
System.ArgumentException: Item has already been added. Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6" Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
This happens only on some PC clients !
Thanks for any help !
IvanHi Vid,
Thanks for your suggestion.
I am using a different patch i.e.
BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
and it helps to solve my problem.
Cheers. -
The following error occured when searching for on-premises exchange server
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter RalphsThanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter -
Error occurs when running autoconfig on application tier
When running autoconfig on application tier, error occurs:
Starting AutoConfig at Sun Jul 3 08:06:11 2011
Using adconfig.pl version 115.78
Classpath : /u01/prodapps/prodcomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u01/prodapps/prodcomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u01/prodapps/prodcomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u01/prodapps/prodcomn/java/appsborg2.zip:/u01/prodapps/prodcomn/java
===========================================================================
Starting Utility to Report Version Conflicts at Sun Jul 03 08:06:14 PDT 2011
Using VersionConflictListGenerator.java version 115.2
All driver files processed.
No version conflict encountered.
===========================================================================
ERROR: Context Value Management Failed.
Terminate.
I referred to Note 461258.1: Autoconfig Error On Apps Tier: Context Value Management Failed (Doc ID 461258.1), and there's no such directory: $JAVA_TOP/oracle/sql/
Please HELP!
Thanks,
JackiePlease see these docs.
Adconfig.sh Fails With Error AC-30202 Unrecognized Action Apecified On Oracle EBS 11.5.10.2 [ID 1240795.1]
How To Synchronize The Context file Stored In Database (FND_OAM_CONTEXT_FILES table) With The Context File In the File System?. Run Autoconfig Failed With "ERROR: Context Value Management Failed" [ID 463895.1]
Autoconfig execution fails on Class StoreDataOfFile.getChkListConditions() [ID 1269146.1]
Thanks,
Hussein -
I am installing a new reporting server.
When running a report I get the above error:
Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308)
Any ideas?Have a look here for Oracle's guidelines on troubleshooting such errors:
http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsTroubleshoot.html -
Error occurs when running zlogin zonename cmd
Hi:
We are trying to run pkgrm on a zone using
the following command:
# zlogin <zonename> pkgrm <pkgname>
But the package is not removed completely.
We get the following error messages instead:
## Updating system information.
pkgrm: ERROR: bad read of contents file
pkgrm: ERROR: pathname=/usr/staroffice7/share/template/portuguese_brazilian/wizard/bitmap/spain.gif
pkgrm: ERROR: problem=no memory for package information
bash-3.00# echo $?
1
bash-3.00#
Has anyone else encounter this problem before ?
If yes, could some one please tell us what the work around is ?
Thanks
JLWhy you need to run this report in R12?
Please see these docs.
Master Note for Diagnosing OS Memory Problems and ORA-4030 [ID 1088267.1]
Getting Started with ORA-4030 Diagnostics [ID 863562.1]
Diagnosing and Resolving ORA-4030 errors [ID 233869.1]
Thanks,
Hussein -
Error occured when running the "Receiving Transaction Processor"
Dear all :
We just found the scheduled concurrent program "Receiving Transaction Processor" all failed from last day,
and this program is always trying to re-run till it could finished successful.
the request log like following :
采购管理系统: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: 接收事务处理处理器
当前的系统时间为 25-02-2013 17:10:28
并发程序 RVCTP 返回错误
原因:RVCTP 遇到内部错误。参数:RVCTP,BATCH,,,
措施:请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮助。
RVTBM-007:子例行程序 rvtbm_batch_mngr() 返回的错误
原因:子例行程序 rvtbm_batch_mngr() 返回时出现内部错误。
措施:请记录此错误编号以及您尝试进行的活动。 请与系统管理员联系以
RVTBM-080:子例行程序 rvtptcontrol() 返回的错误
原因:子例行程序 rvtptcontrol() 返回时出现内部错误。
措施:请记录此错误编号以及您尝试进行的活动。 请与系统管理员联系以寻求帮
RVTLO-050:ORA-01403: 未找到任何数据
原因:在 RVTLO 中出现 SQL 错误。SQL 错误为 &LSQL_ERR。
措施:请记录此错误编号以及您尝试进行的活动。请与系统管理
在试图启动立即并发程序 RVCTP 时,并发管理器出现错误。例行程序 &ROUTINE 接收到返回代码失败的信息。
请与您的支持代表联系。
当前的系统时间为 25-02-2013 17:10:29
成功地重新提交具有请求编号 21500965 的并发程序 RVCTP,以在 25-02-2013 17:05:30 启动。 (ROUTINE=AFPSRS)
正在执行请求完成选项...
Output file size:
0
未打印输出文件,因为:
已禁用此报表的打印选项。
已完成执行请求完成选项。
thanks and regards
Filex LiuDear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu -
Error occurs when running emcli add_target
Hello,
I created a simple plugin which contains only two target types for learning using JDeveloper (Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493). I then validated plugin distribution and created plugin archive on right-click project name.
plugin.xml content:
<?xml version="1.0" encoding="UTF-8" ?>
<Plugin xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/EnterpriseGridControl/plugin_metadata plugin_metadata.xsd"
xmlns="http://www.oracle.com/EnterpriseGridControl/plugin_metadata">
<PluginId vendorId="z" productId="y" pluginTag="xxx"/>
<PluginVersion value="12.1.0.0.0"/>
<ShortDescription>Enterprise Manager for Second Target Type</ShortDescription>
<TargetTypeList>
<TargetType name="z_y_xxx_Second Target Type"/>
<TargetType name="z_y_xxx_Third Target Type"/>
</TargetTypeList>
<PluginAttributes Type="MP" Category="Engineered Systems"
DisplayName="Second Target Type"/>
</Plugin>
z_y_xxx_Second Target Type.xml
<TargetMetadata META_VER="1.0" TYPE="z_y_xxx_Second Target Type"
xmlns="http://www.oracle.com/EnterpriseGridControl/target_metadata">
<Display>
<Label NLSID="Second Target Type_name">Basic Target Type</Label>
</Display>
<Metric NAME="Response" TYPE="TABLE">
<Display>
<Label NLSID="Second Target Type_response">Response</Label>
</Display>
<TableDescriptor>
<ColumnDescriptor NAME="Timing" TYPE="NUMBER" IS_KEY="FALSE">
<Display>
<Label NLSID="Second Target Type_response_timing">Elapsed Time</Label>
</Display>
</ColumnDescriptor>
<ColumnDescriptor NAME="Status" TYPE="NUMBER" IS_KEY="FALSE">
<Display>
<Label NLSID="Second Target Type_response_status">Status</Label>
</Display>
</ColumnDescriptor>
</TableDescriptor>
<!--
<QueryDescriptor FETCHLET_ID="URLTiming">
<Property NAME="host" SCOPE="INSTANCE">host</Property>
<Property NAME="port" SCOPE="INSTANCE">port</Property>
<Property NAME="url0" SCOPE="GLOBAL">http://%host%:%port%/</Property>
<Property NAME="retries" SCOPE="GLOBAL">1</Property>
<Property NAME="verbose" SCOPE="GLOBAL">0</Property>
</QueryDescriptor>
-->
</Metric>
<!--
<InstanceProperties>
<InstanceProperty NAME="host">
<Display>
<Label NLSID="Second Target Type_instprop_host">Hostname</Label>
</Display>
</InstanceProperty>
<InstanceProperty NAME="port">
<Display>
<Label NLSID="Second Target Type_instprop_port">Port</Label>
</Display>
</InstanceProperty>
<InstanceProperty NAME="installdirectory">
<Display>
<Label NLSID="Second Target Type_instprop_installdir">InstallDirectory</Label>
</Display>
</InstanceProperty>
</InstanceProperties>
-->
</TargetMetadata>
Running Plugin validation ....
Validating Plug-in metadata .. Passed
Validating Plug-in metadata semantics .. Passed with warnings
Validating Staging Directory .. Passed
Validating MRS Syntax .. Passed
Validating MRS Semantics .. Passed
Validating Metadata embedded SQL .. Skipped
Validating Object Names .. Passed
Plugin validation Passed with warnings
Validation Report generated to: /tmp/xxxProject/dist/plugin_validation_report_131023.txt
Plugin validation completed.
Running Plugin archive creation ....
Validating Plug-in metadata .. Passed
Validating Plug-in metadata semantics .. Passed with warnings
Validating Staging Directory .. Passed
Validating MRS Syntax .. Passed
Validating MRS Semantics .. Passed
Validating Metadata embedded SQL .. Skipped
Validating Object Names .. Passed
Plugin validation Passed with warnings
Validation Report generated to: /tmp/xxxProject/dist/plugin_validation_report_131023.xml
Creating the opar file......
Plug-in validation has revealed some warnings. You must fix all these issues before releasing plug-in to production.
Successfully created the plugin archive . The opar file is /tmp/xxxProject/dist/12.1.0.0.0_z.y.xxx_2000_0.opar
Plugin archive creation completed.
Then I executed these commands:
./emcli setup -url=https://abc.com:7803/em -username=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserved.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in the help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
$ ./emcli import_update -file=/export/em_install/mid_home_loc/oms/bin/12.1.0.0.0_z.y.xxx_2000_0.opar -omslocal
Processing update: Plug-in - Enterprise Manager for Second Target Type
Successfully uploaded the update to Enterprise Manager. Use the Self Update Console to manage this update.
$ ./emcli deploy_plugin_on_server -plugin=z.y.xxx:12.1.0.0.0 -sys_password=*****
Performing pre-requisites check... This will take a while.
./emcli get_plugin_deployment_status -plugin_id=z.y.xxx
Plug-in Deployment/Undeployment Status
Destination : Management Server - abc.com:4890_Management_Service
Plug-in Name : Second Target Type
Version : 12.1.0.0.0
ID : z.y.xxx
Content : Plug-in
Action : Deployment
Status : Success
Steps Info:
Step Start Time End Time Status
Submit job for deployment 10/23/13 2:41:47 PM PDT 10/23/13 2:41:47 PM PDT Success
Initialize 10/23/13 2:41:49 PM PDT 10/23/13 2:41:54 PM PDT Success
Install software 10/23/13 2:41:55 PM PDT 10/23/13 2:41:55 PM PDT Success
Validate plug-in home 10/23/13 2:41:56 PM PDT 10/23/13 2:41:56 PM PDT Success
Perform custom preconfiguration 10/23/13 2:41:56 PM PDT 10/23/13 2:41:56 PM PDT Success
Check mandatory patches 10/23/13 2:41:56 PM PDT 10/23/13 2:41:56 PM PDT Success
Generate metadata SQL 10/23/13 2:41:56 PM PDT 10/23/13 2:41:56 PM PDT Success
Preconfigure Management Repository 10/23/13 2:41:56 PM PDT 10/23/13 2:41:56 PM PDT Success
Configure Management Repository 10/23/13 2:41:57 PM PDT 10/23/13 2:42:39 PM PDT Success
OPSS jazn policy migration 10/23/13 2:41:57 PM PDT 10/23/13 2:41:57 PM PDT Success
Register metadata 10/23/13 2:42:39 PM PDT 10/23/13 2:42:41 PM PDT Success
Perform custom postconfiguration 10/23/13 2:42:41 PM PDT 10/23/13 2:42:41 PM PDT Success
Update inventory 10/23/13 2:42:41 PM PDT 10/23/13 2:42:42 PM PDT Success
$ ./emcli deploy_plugin_on_agent -agent_names=abc.com:3872 -plugin=z.y.xxx:12.1.0.0.0
Agent side plug-in deployment is in progress
Use "emcli get_plugin_deployment_status -plugin_id=z.y.xxx" to track the plug-in deployment status.
$ ./emcli get_plugin_deployment_status -plugin_id=z.y.xxx
Plug-in Deployment/Undeployment Status
Destination : Management Agent - abc.com:3872
Plug-in Name : Second Target Type
Version : 12.1.0.0.0
ID : z.y.xxx
Content : Plug-in
Action : Deployment
Status : Deploying
Steps Info:
Step Start Time End Time Status
Submit job for deployment 10/23/13 2:43:44 PM PDT 10/23/13 2:43:44 PM PDT Success
Initialize 10/23/13 2:43:47 PM PDT 10/23/13 2:43:47 PM PDT Success
Copy archives 10/23/13 2:43:47 PM PDT 10/23/13 2:43:47 PM PDT Success
$ ./emcli add_target -name="z_y_xxx_Second Target Type" -type="z_y_xxx_Second Target Type" -host=abc.com -prop="UseGeneratedData:false"
Error: Target type specified does not exist on this agent
This execution fails, but we see the plugin in the agent. The type we have is obtained from the plugin.xml,
<TargetTypeList>
<TargetType name="z_y_xxx_Second Target Type"/>
<TargetType name="z_y_xxx_Third Target Type"/>
</TargetTypeList>
Thank you for your help in advance!
Message was edited by: user13475271
I would like to mention that we also tried to add using Oracle Enterprise Manager (Version 12.1.0.3.0). Setup->Add target->Add Targets Manually. But under Add Targets Manually, there are three choices (radio buttons). We have tried all, but we didn't get it to add a target.Why you need to run this report in R12?
Please see these docs.
Master Note for Diagnosing OS Memory Problems and ORA-4030 [ID 1088267.1]
Getting Started with ORA-4030 Diagnostics [ID 863562.1]
Diagnosing and Resolving ORA-4030 errors [ID 233869.1]
Thanks,
Hussein -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
The following error occured while searching for on-premises exchange server
I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter RalphsThanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter -
Error Message when running BI Publisher
Hi-
Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
Any idea regarding the error message
Regards,
MACDDid your custom report ever ran successfully in the environment you are getting the error.
Most of the time not all the report definition and associated definitions are migrated to the next environment.
Have a look at following doc:
E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1) -
Error occured when giving down payment request through Tcode F-47
Dear All,
Following error occured when giving down payment request through Tcode F-47 by
inserting purchase contract in Purch. Doc. field :
Purch. doc. 4600000442 neither a purch. order nor a schedul. agmt.
Message no. ME703
please suggests
Regards
ShaileshHi
As error message states, you should put PO number instead of Purchase Contract number in downpayment request.
You can create a PO for that Purchase contract if you want purchase contract should also be used in that process.
Brgds
Abdulla -
I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
Error occurs when i try to install a built application containing Web services VIs
Hello,
at the moment i am trying to create and install a built application containing a Web server and Web services VIs. I did the steps as described here: http://www.ni.com/white-paper/7747/en#toc13
But when I install my application on the target PC the following error occurs after the installation:
Error2: Failed to perform action
"[LV2011RTEDIR]LVWS\NILVWSPostInstallerScript.exe"
"[ProgramFilesFolder]DeployWebServices\Webservice.lvws"
What did I do wrong? The project example is attached
Development system: LV2011 SP1, WIn7
Target PC: Win7, no LabVIEW, but ALL possible additional installer/run-times installed
Thanks,
Elmar
Certified LabVIEW Developer
www.merecs.de
Attachments:
Deploy Web Services.zip 20 KBHi,
long time ago, but I can remember. You have to copy a folder.
e.g. I have the file in C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2013\LVWS , but there is no LVWS folder in \Shared\LabVIEW Run-Time\2012
(I have a new computer, and for some reason I'm also missing the file in the LV2012 folder now.)
Try to copy from another version to 2012 U(or download my fzip). I also don't now, why it is missing. Maybe something during the LV2012 installion was wrong.
Hope I could help,
Elmar, CLD
Certified LabVIEW Developer
www.merecs.de
Attachments:
LVWS.zip 688 KB -
Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!
Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!
Maybe you are looking for
-
Hi Jcontrol.exe is stopped. I checked in server0 log file. Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: Caused by: com.ibm.db2.jcc.b.DisconnectException: [ibm][db2][jcc][
-
Where are my iCloud contacts stored on my computer?
I'd like to transfer all of my contacts from my Microsoft Outlook to my Google account! Somehow, I had linked all my contacts in Outlook to iCloud. Now I can no longer sync my contacts from OUtlook to my Google account and Android phone! This is a
-
SCCM Client entry in SCCM console for new VM with same hostname
HI, I have Hyper V server with several VM's running with server OS. Recently I have stopped 2 VM's with OS windows server 2008 & 2012 & recreated new VM's with same hostnames & IP addresses. Problem is I am unable to install SCCM client on New VM as
-
Office-landscape drawing applet. tough one?
Hello almighty guru's! I'm creating a Java applet that is going to be an build-it-yourself office-landscape. The applet will have a "draft view" where the user can define their workspace by length and height and draw a sketch of their location. The s
-
My mail on my ipad is still not wrking
My mail on my ipad I can't send recieve emails or delete junk mail