Following the iOS 4.3.5 update, my phone can no longer be charged or connected to my PC.  What is causing this and how do I fix it?

I get the message "Charging is not supported with this accessory" or just no connection at all.

I downgraded flash to 10.3 and it fixed the problem. Everything works fine now. I suggest everyone do this until Adobe releases a fix for 11.7.

Similar Messages

  • I just purchased the 4S and am having trouble with it at least once a day says Invalid Sim, what would cause this and how do I fix it

    I just purchased the I 4S and at least once a day, it will say Invalid Sim, what would cause this and how do I fix it?

    Then, if there's any data on the drive that you want to keep, you have to back up before you do anything else -- assuming it's still possible.
    Basically you have three options:
    1. Install a copy of the Mac OS on an external hard drive, boot from it, and copy the data from the internal drive.
    2. Start the problem Mac in FireWire target mode (command-T at startup) and connect it to a working Mac with a FireWire cable. The internal drive will mount as a FireWire device.
    3. Remove the internal drive and mount in an external enclosure on another Mac.
    Once you've backed up, follow the sequence in the support article linked below. The article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running Lion) by holding down the key combination command-R at the chime.
    Mac OS X: Gray screen appears during startup

  • My MacBook Pro has been having difficulties at startup.  It sometimes locks and doesn't get past the white screen.  It has also locked up several times and gotten a green stripes across the entire screen.  What is causing this and how do I fix it?

    My MacBook Pro has been having difficulties at startup.  It sometimes locks and doesn't get past the white screen.  It has also locked up several times and gotten a green stripes across the entire screen.  What is causing this and how do I fix it?

    You don't, take it to Apple for repair.
    This might interest you if it's too old to fix.
    My computer is not working, is my personal data lost?

  • Apple Support says my serial number is invalid. What would cause this and how could I fix it. And yes, I am certain I provided the correct serial number.

    Apple Support says that my serial number is invalid. I provided the correct number. What would cause this and how can it be fixed. Ipad II.

    Things that could cause it:
    you bought a fake
    you allowed an unauthorized person to "repair" the iPad, replaced the logic board

  • I have iTunes version 10.7.0.21 for Windows 7.  It was working fine untill recently.  Now when I play a T.V. show the audio cuts in and out, the video pauses intermittenly and also intermittenly fast forwards.  What is causing this and how do I fix it?

    I'm having problems with video play back in itunes 10.7.0.21 for windows 7.  Video was playing fine, but now I'm having audio issues.  Audio cuts in and out.  Also video pauses and fast forwards.  Does anyone know what would cause this all the suddenly?  More importantly does anyone know how to fix this?

    All sorted now. Thread can be closed!

  • I constatnly have to restart my computer to get my iTunes to open. I have updated to the latest version and still have same problem. What is causing this and how do I fix it?

    I constantly have to restart my computer to get my iTunes to open. Does anyone know of a solution?

    Here are the two ways that I run apps as admin in Win 7. Would recommend trying the first method to see if it works before you use the second method.
    First: I use this one if I only need to do it occasionally (you may find this way tedious after a few days). Right click on iTunes and the context menu will pop up. Click on "Run as administrator" then another popup will open asking you to confirm if you want to allow iTunes to have admin privilleges (this happens every time any app requests higher privelliges), choose yes and if our issues are the same iTunes should load.
    Second: The semi-permenant method, again I'd say try the other method first to see if this will work for you. Right click on iTunes like before but choose Properites, then go to the Compatibility tab. At the bottom you have the ability to give iTunes admin privilleges every time it loads. Check that box, then click apply then OK. You will still see the box I mentioned earlier (I can't get a screen shot of it) asking if its ok to run with higher rights, but this way is a couple of clicks less.
    Let me know if you have any more questions.

  • Firefox update installs, but does not apprearon screen, or task manger yet is running what is going on and how does one fix it?

    I installed the update Mozilla Firefox 28. It was suppose to launch upon completion. it did not appear on the monitor screen, nor the task manager, but was running; for when I attempted to install the older version again it, it said that Firefox was running and needed to be turned off.
    I restarted the computer and tried opening Firefox, with the same results.
    After restarting again, I attempted to reinstall the update, with the same results taking place.
    I attempted to uninstall Firefox and install the new version. The same results took place.
    In the past, I could install Firefox 27 update, only now I can't for the same thing takes place. Past a certain version (19), this event takes place, but 19 and older can install it with no problems.
    I checked Firefox troubleshooting information. All was normal. I checked my firewall. Again, all was normal. Tried Firefox reset. Did not help. Tried with my firewall disabled. Did not solve the problem.
    Ran a virus check (deep) no viruses. Checked my computer system. No errors.
    I can install updates for my other programs, even install new programs; just not Firefox.
    What is going on and how does one fix it.

    Hi Amseeking,
    Thank you for your question. From your description, you tried to install the 28 update from a version 19 installation. Did you install a fresh install of 28 successfully? Where the name of the file is"Firefox Setup Stub 28.exe"? This is what is sound like happened. When going to about Firefox and searching for updates it installs over the current installation. However if Firefox was already running, there are more than one installation.
    Updating from version 19 to 28 would not be a problem. However the user data from your previous version would have to be imported to the new installation if you have more than one install on that computer.
    An easy way to tell is to search for Firefox in the Start menu to see if more than one icon shows up in the search results.
    I hope this helps.

  • I have an iMac and under devices in the sidebar that name has changed from iMac to iMac(1) to iMac(2)...and is now at iMac(9).  What is causing this and how do I correct it?

    I have an iMac and under devices in the sidebar that name has changed from iMac to iMac(1) to iMac(2)...and is now at iMac(9).  What is causing this and how do I correct it?

    Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
    Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
    A third-party wireless router that has incompatible settings or firmware may be the cause. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
    Rename the computer in the Sharing preference pane.

  • The sound has been working fine until now. I turn the volume up but no sound. What could be causing this and how do I fix it? Thanks so much.

    The sound has been working fine until yesterday. I turn the volume up but no sound. Not while playing games or with key taps. What is causing this and how can I fix it? Thanks so much.

    I did a search for "no sound" and found the solution. Thanks for the info.!

  • Missing songs: half of the songs in my library have suddenly become unplayable because iTunes "cannot locate original file" whats caused this and how do i fix it?

    Its really irritating having all my songs there one day and having half of them go missing the next and i haven't done anything to cause the files to be lost, on top of that it's completely randomised in what songs have gone missing as it is not whole albums, individual songs from different albums are going missing and it's telling me to find the files, which i have no idea where to look or what to do, it has rendered iTunes completely useless for me. Does anyone else have this problem? How did you fix it?

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Imac 21"  I keep getting ggh'l  and the speaker volume screen keeps popping up.  Any ideas of what is causing this and how to fix it?

    I recently converted from the PC world to Apple and got an IMAC 21".  I keep getting the speaker volume screen popping up periodically and also types in ggh'l into whatever application I have open.  I have the lastest software and have McAfee antivirus installed.  This is a recent problem in the last few days so I'm not sure what is causing it.  Any ideas/suggestions?

    etresoft  a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
    http://www.etresoft.com/etrecheck
    Post the results back here
    Pete

  • Every time I create a new folder on my iMac desktop, the folder immediately copies every other folder and file on my desktop, so that I now have multiple, unwanted copies of every folder taking up memory.  What caused this and how do I fix it?  Thanks.

    I also can not move any items on my desktop to another spot on the screen.

    Holy cow!???
    Here's an older cure I'd try...
    First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.dock.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • After a PRAM reset my MBP 1,1 display is split into 4 parts each displaying the same image. What is causing this and how can I fix it?

    After resetting the PRAM/NVRAM (control, option, P, R) on my Macbook Pro 1,1 (2007) running 10.6.8 The screen is now split into 4 parts, each displaying the same thing. The screen immediately appears this way at the first grey screen, however if I do another NVRAM reset, upon restart after the second startup chime, the screen is normal but once it gets to a certain point around thetime the cog stops spinning, the screen flickers, turns blue and splits into four again.
    Another thing is when I tried using the Apple Hardware Test I couldn't read the instructions as the resolution was too small, but once I restarted and change my display resolution in System Preferences, the resolution was readable in AHT. I assumed the System Settings were loading when the OS had booted and that AHT runs without any of these settings (if that makes sense?)
    I've not used any third party utilites and everything working fine except for some battery issues which are gone now (the reason I tried the PRAM reset)
    Any help would be much appreciated

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When I tried to shut down my IPad( by sliding the red bar) the spinning gear started spinning and it won't shut down. The gear has been spinning for 18 hrs now. What is causing this and how can it be fixed?

    When I tried to shut down my other Ipad(by sliding the red bar) the gear symbol started spinning but it won't shut down--the gear is still spinning 18 hrs later.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • When I click on the "import all" button when downloading my photos I get a message that states that the format is unrecognizable.  What caused this and how do I change it so I can import my photos?

    I am trying to download photos from my digital camera.  I have done this many times before with this same camera; however this time when I click the "import all" button I get a message that states that the format is unrecognizable.  It doesn't specify what the format is. 
    What is causing this and how do I correct it?  Any ideas would be greatly appreciated!
    Thank you!
    Aimee

    Make a temporary, backup copy of the library and try the following:
    launch iPhoto with the Command+Option keys held down and rebuild the library.
    select the options identified in the screenshot.
    Click to view full size
    Launch iPhoto and try importing again.
    OT

Maybe you are looking for

  • Generating a report for clients that are not registered

    Hi - Hopefully someone can assist. We are looking to generate a report in SCCM 2012 that will tell us if a client is properly registered, and most recent scan. I can't seem to find a generic report for this task, so does anyone know if one exists - o

  • Runtime error while AttachPathAndPropagateNotifications()

    Hi! I am trying for "replace <column>" expression in a "Derived Column" transformation operator(programatically). Before this, I tried this through SSIS Business Intelligent Studio and it worked! So, I moved towards programatical approach. In my prog

  • Apple loops say that i have insufficient privileges when using them in logi

    i know that there is probably a post already, but plz help if you can. i did search a little, but did not find what i was looking for. when i drag out of loop browser onto the arrange i get error message from logic about the (topic subject).

  • Add a Date column

    I want to add a column to the end of a existing Table that has data in it. I need the column to contain DATE information and then after inserting the column I need to make all the rows values for that new added column to be in this format: Month-Year

  • Is there a way to know if a file is being used or not?

    Hello, I just switched from GoLive to DW. GL had a feature in the site window called "Used" in which a dot would appear next to every image file or page that was in use in the site. If there was no dot, the image or page was not in use, and I could s