Fond size and lines in iWeb

Hi ALL,
What are the best fond sizes I can use in iWeb.
I used the Font sizes 12 - 14 - 16 - 18 - 24
Used Font - FUTURA
How does a line of 1 point - 2 points - 4 points looks on the Internet?
Thanks in advance ...
Dimaxum

Futura is not on the list of web safe fonts. The smallest size font I would use on a web page is 14 pt.
http://www.iwebformusicians.com/WebMusic/FontsandColors.html

Similar Messages

Extraction of font-sizes and line height is completely bugged.

Hello,
I have been using projectparfait / (now assets) since a very long time and I must say it changed my whole workflow regarding front end development. Being able to quickly look up the font-sizes and line height is/was for me one of the most valuable features. Now since a little while, all the font-sizes/line heights have a scaling factor applied to it which is more than annoying, it basicly make this tool useless to me, there are still features like the measuring tool which are great but ultimately i have to open the files with photoshop which I try to avoid as much as I can.
It would be great if you guys could look into this.
Best regards Thomas

Hi Futureburo, sorry that you're having problems with Extract!
Just to check, have you changed the Preferred Font Unit or Base Font Size? That would change the measurements your getting in the CSS.
If not would you mind sending me the PSD you're having trouble with? You can get a link from the top right:
and either message me or post a reply here.

Line size and line count

Hi all,
May i know about line size and line count impact on reports ?
i mean depending on line sizes values i.e 200 etc hw it will effect report either in output display or length ?
and also ablout line count too.
Thanks in advance.

This information may help you
*... LINE-SIZE width *
Effect
This addition specifies the line width of the basic list and details list of the program to width characters, and sets the system field sy-linsz to this value. The line width determines the number of characters in the line buffer as well as the number of columns in the list displayed. The value width must be a positive numeric literal. The maximum line width is 1,023 characters.
When the LINE-SIZE is not specified, the line width of the basic list is set to a standard width based on the window width of the current Dynpro, but is at least as wide as a standard size SAP window. For the standard width, the contents of sy-linsz is 0. The LINE-SIZE overwrites the value of the like-named LINE-SIZE addition to the statement SUBMIT and can be overwritten during list creation with the like-named LINE-SIZE addition to the statement NEW-PAGE.
Note
The current maximum line width is stored in the constants slist_max_linesize of the type group SLIST. Also defined there is a type slist_max_listline of type c with length slist_max_linesize.
*... LINE-COUNT page_lines[(footer_lines)] *
Effect
This addition specifies the page length for the basic list of the program to page_lines lines and fills the system field sy-linct with this value. If the LINE-COUNT is not specifed, and if page_lines are less than or equal to 0 or greater than 60,000, then the page length is set internally to 60,000. This setting overwrites the passed value of the like-named LINE-SIZE addition to the statement SUBMIT and can be overwritten during list creation with the like-named LINE-COUNT addition to the statement NEW-PAGE.
If you optionally specify a number for footer_lines, a corresponding number of lines are reserved for the page footer, which can be described in the event block END-OF-PAGE.
You must specify page_lines and footer_lines as numeric literals.
Notes
For screen lists, you should use the standard value since, as a rule, page breaks defaulted through LINE-COUNT are not adjusted to the window size.
You should also use the standard value for print lists, so that you can still select the page size on a printer-specific basis. A print list should be created in such a way so that it can handle every page size.
Specifying a fixed line count is only useful for form-type lists with a fixed page layout. Here, however, you should always check whether such forms can be created by other means, such as SAPScript forms.

How do I change the font size and line height (so font will fit) in my inbox?

In order to make the information containing the source and subject of my incoming e-mails (from Netzero) easier to read, I would like to make the font larger. However, when doing so, the line heights stay the same and the information on each line is vertically compressed. This actually makes it more difficult to read.

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Is there a way to remove the size and position readout when moving Lines in Keynote?

When moving the endpoints of lines while creating a presentation, a size and position readout appears on the screen. This obscures details below it, often making it difficult to precisely position a line. Is there a way of disabling this? The option in Preferences for disabling this readout for objects does not work for lines. Is this a bug, or am I missing something?

sberman wrote:
I'm not completely sure I understand, but ...
Might Settings > General > Accessibility > Reduce Motion = "On" do what the customer wants?
I will tell him about that, but I don't think that would be it if that is related to animation.
We're talking about the wallpaper background that get blurry during the phone screens like http://www.tekrevue.com/wp-content/uploads/2013/09/20130923_ios7emergencycallfla w.jpg (left side) and http://i.i.cbsi.com/cnwk.1d/i/tim2/2013/09/20/ChangingYourTheme.png ... You can see there are background images that got blurred out.

The box in my Photoshop Elements, which shows the size and types of brushes has shrunk to one unreadable line. How do I expand the box to its original size? I have tried dragging it open but nothing moves.

The box in my Photoshop Elements, which shows the size and type of brushes, has shrunk to one unreadable line. How can I expand this box to its original size? I have tried dragging it open but nothing happens and none of the tool boxes appear to give me an expansion option

Well, when you open the program, the splash screen, the window you see while the program is opening, should make that clear enough. For example:

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

iOS 7
Seperate text size modification is no longer available in Safari Reafer.
Use Settings.
Settings >General > Text Size

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

Is there a way to make comments "move to the back", behind the text and lines?

Is there a way to make comments "move to the back", behind the text and lines?
I am using Acrobat X Standard to "highlight" lines using comments lines at 12pt width and 50% opacity on DWG files converted to PDF. The opacity setting makes the text and lines readable behind the highlighting, but the colors do not print well. Moving the highlighting behind the existing text and lines would allow me to use 100% opacity with more vibrant colors.
Before, we highlighted by hand, but those colors do not scan or copy well. Digitizing the highlighting is cleaner, and can be edited without starting over. The "comments" lines can be applied by Acrobat Reader, Acrobat Standard, and Acrobat Pro, so there's an advantage. Even more important is that the average file size of an 11x17 print that is highlighted and scanned in color is 1000 KB, while doing it this way, they tend to be 100-150 KB, and the text remains searchable. If there's another system that people use, I'm open to that instead. I haven't looked in to doing the highlighting in AutoCAD.
Naturally, everything I'm doing is protected, and cannot be shared, sorry.
Thanks.
Message was edited by: Nathan Goldblatt

No, that's not really an option.

Listing File, path, sizes and dates

Hi all
Case: I have 6 machines on one network (some with 2 drives), another on another network (connected by vpn) and 3 external drives.
These all have accumulated stuff, some repeated as I've upgraded and re-purposed machines but left directories behind as a safeguard.
I need to rationalise the space and develop a more systematic approach to backup and archiving.
My first step is do an inventory of what's where and my natural approach is work with a data base of file name, path, size, created date and last modified to allow me to do some maths on archiving to dvd.
Using find as follows
find [Start Somewhere Directory] -print > [workspace path]/TestOutput.txt
gives me a nice list of file name I can parse out in a database
But I don't get size and dates.
Adding -ls produces that info but creates header lines for parent directories and adds permissions, node and other info I don't need.
I got to here
find [Start Somewhere Directory] -type df -exec ls -lshk {} \; -print > [workspace path]/TestOutput.txt
but still has the hierarchical output rather than flat paths.
Am I doing this all the hard way ? Is there a tool that returns just what I'm looking for ?
Or what command will allow me to take just the relevant columns form ls to the print parameter ?
Or can I extend find to add the size and date info to the output ?
Kind Regards
Eric

Eric
I just so happened to have done something similar before!
It relies on mdls so isn't exactly speedy, but produces a full path, size, modification date, modification time, creation date and creation time as a comma separated list. mdls is not exactly predictable as to which order you get its output, so basically you have to try first without any editing.
Anyway, here it is:
sudo find ~/testfolder -type f \! -name ".*" -exec echo 'mdls -name kMDItemFSSize -name kMDItemFSCreationDate -name kMDItemFSContentChangeDate "{}" | tr "\n" "," | sed "s%^$/.*$ .*ChangeDate = $....-..-..$ $.*$ .CreationDate.= $....-..-..$ $.*$ ...00,.FSSize.= $.*$,$%\"\1\",\6,\2,\3,\4,\5%"' \; | shI'm sure it could be improved!
You could also do it with AppleScript, since that can access the creation date easily.

Image size and mime type.. non-java guy needs help

Image size, mime type.. non-java guy needs help
Im not at all familiar with java so this is really weird for me to work out. I?ve been doing it all day (and half of yesterday).
Im trying to write a custom clodFusion tag in java that gets the width, height, size and MIME types of a given file. I?ve been trying to get it to work on the command line first. I can get the width and height but cant get the size and the MIME type.
Here is what I got
/*import com.allaire.cfx.*;*/
import java.awt.image.renderable.*;
import javax.media.jai.*;
import com.sun.media.jai.codec.*;
import java.io.*;
import java.util.*;
public class ImageInfo {
private RenderedOp image = null;
private RenderedOp result = null;
private int height = 0;
private int width = 0;
private String type = "";
private String size = "";
public void loadf(String file) throws IOException
file = "80by80.jpg";
FileSeekableStream fss = new FileSeekableStream(file);
image = JAI.create("stream", fss);
height = image.getHeight();
width = image.getWidth();
System.out.println(height + "\n");
System.out.println(width);
System.out.println(type);
public static void main(String[] args) throws IOException {
ImageInfo test = new ImageInfo();
test.loadf(args[0]);
can anyone please help me out to modify the above so I can also print the mime type and the file size to screen.
thanks for any help

any suggestions?

How to change marker size in line graphs

Hello,
I'm using line graph and i show markers for the user know where to see a tooltip. I observed that the line markers are very big and clutter my graph when points are very close one anothers. I would like to make them smaller, but I don't know how to do it.
Any help is appreciated.
Thanks,
Plan.
<dvt:lineGraph ...>
<dvt:seriesSet markerDisplayed="true">
</dvt:seriesSet>
</dvt:lineGraph>

>System Preference>General
this will change text size and associated icon size.

How do I enlarge the text size and incease the resolution

I just switched to a new computer and suddenly the text on and off line is in tiny letters I can barely read. How do i enlarge it to its former size and also restore its former resolution?

If you have a LCD screen then you should only use the native resolution of that screen.
Increase the String pref layout.css.devPixelsPerPx in 0.1 steps from 1.0 to 2.0 on the about:config page (percentage divided by DPI, % / DPI) to change the size in the entire Firefox browser window.
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)
If the content on websites needs to be adjusted after changing the pref then you can look at NoSquint or Default FullZoom Level.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

New to CSS, text-align and line-height ok in 'Design', but not in browsers (IE 10 & Chrome) on Win8

[DREAMWEAVER CC]
I'm now learning CSS, and find that where I specify in an external style sheet
h1 {
          font-family:Baskerville, "Palatino Linotype", Palatino, "Century Schoolbook L", "Times New Roman", serif;
          text-align:center;
          color: black;
          font-size: 1em;
          font-weight: normal;
          font-style: normal;
          line-height: 3.0;
          letter-spacing: 0px;
          word-spacing: 10px;
text-shadow: 3px 3px 5px #333;
text-decoration: none ;
text-transform: none;
That, in DW Design, they look fine, but in Windows 8, IE 11 and ChromeVersion 31.0.1650.63 m   that the text-align: center; and the line-height: 3.0; are ignored.
I work around by specifying <tr align="center" height = "77">   shouldn't the text-align: center; and the line-height: 3.0; be specifiable in my CSS??
Thanks for any help!
<tr height="77" align="center">
        <h1>
            <td bgcolor="CornSilk">1/28/2014</td>
            <td>the Sky</td>
            <td>Fate is the Hunter</td>
          <td >Ernest Gann</td>
            <td >John</td>
            <td >Jessica</td>
          <td><a href="http://www.amazon.com/FATE-HUNTER-Ernest-K-Gann/dp/0671636030/ref=sr_1_1?s=books&ie=UTF8&q id=1387462831&sr=1-1&keywords=ernest+gann">Learn More</a></td>
        </h1>
    </tr>

hemmi1 wrote:
[DREAMWEAVER CC]
I'm now learning CSS, and find that where I specify in an external style sheet
Not sure what it is you are trying to do but what you have at the moment is invalid code which is most likely why it doesn't work cross browser. (of cousre this css does not help - line-height: 3.0; - 3.0 what? - px, ems?)
Here's an example below of how you could do it. Give your table a class (below it is called .myTable) then you can start styling the <td> cell, and anything inside it by appending the element like an <h2> tag to the class name - .myTable h2
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Untitled Document</title>
<style>
.myTable {
    width: 900px;
    margin: 0 auto;
.myTable td {
font-family:Baskerville, "Palatino Linotype", Palatino, "Century Schoolbook L", "Times New Roman", serif;
width: 150px;
.myTable h2 {
    margin: 0;
    padding: 0;
text-align:center;
color: black;
font-size: 1em;
line-height: 50px;
word-spacing: 10px;
text-shadow: 3px 3px 5px #333;
.myTable a {
    display: block;
    text-align: center;
</style>
</head>
<body>
<table class="myTable" cellpadding="0" cellspacing="0" border="0">
<tr>
<td><h2>1/28/2014</h2></td>
<td><h2>the Sky</h2></td>
<td ><h2>Ernest Gann</h2></td>
<td ><h2>John</h2></td>
<td ><h2>Jessica</h2></td>
<td><a href="http://www.amazon.com/FATE-HUNTER-Ernest-K-Gann/dp/0671636030/ref=sr_1 _1?s=books&ie=UTF8&qid=1387462831&sr=1-1&keywords=ernest+gann">Learn More</a></td>
</tr>
</table>
</body>
</html>

How do I non-destructively sharpen, re-size and save my images if I'm using both LR & CS6?

Hi guys {and gals}...
Ok... here is my dilemma. I am having an incredibly difficult time understanding the best way to sharpen, re-size and save my images for both posting on the web and giving them to clients. I completed my first paid photo shoot (yay!), but as I finished editing each image, I re-sized it and posted it on my FB photography page. I later learned from a fellow at my local print shop that this is a destructive and irreversible edit (not yay! ).
So... before I pull out every last strand of hair on my head, I REAALLLYYYY need to get a good grasp on how to do the following things so that I can establish a good workflow: 1. Sharpen my image well {w/ Smart Sharpen}. Does this have to be done on a flattened image... and isn't flattening irreversible? 2. Re-sizing my images for both web display and client work/printing. Is it true that once I set it to 72ppi for web display, that I lose a great deal of the detail and quality? Do I need to create a copy of the file and have 2 different image sizes?
I am self taught, learning off the cuff through tutorials and constant error... and I just want so badly to have a smooth and beneficial work flow in place.
Currently, my workflow is as follows... 1. Load images into LR and convert to DNG files 2. Quick initial edit & then send into PS CS6 3. Perform detailed/layered edit(s) 4. {I know I'm supposed to sharpen now, as the last step, but am afraid to permanently flatten my image in case I want to tweak the layers later..} 5. Save the file (unflattened) 6. Go back into LR and Export the file to the appropriate place on my hard drive
So... at this point, my image is still at 300ppi {not appropriate for web display}, unflattened {I'm told flattened images are ideal for client work and printing} and not as sharp as I want it to be {because I don't know when to apply Smart Sharpen filter}.
HELP!!!!!!!
Thanks in adavnce for "listening" to me ramble...
~ Devon

There are a lot smarter guys on this forum than I so will let them give you ideas on the sharpen workflow.
Is DNG the same as RAW in that all the edits are non-destructive? With RAW all the edits are put on a separate XMP file and believe with DNG the XMP file is written to the image. In this case would suggest you save the DNG then create a jpg to send to clients or on web. A jpg will not save layers so it is by its nature flattened.
Since you are new to this try this test to understand ppi. Click on Image/image size.
      Change Document size to inches.
      Now uncheck "unsample image" as if this is checked all the pixels will be modified to adjust to the new size. Unchecked no pixels will be changed.
      Now adjust the resolution from 72 to 300 ppi (pixels per inch). Note that the Image Size in pixels does not change, but the document size changes. This means resolution is unchanged.
      Now click "resample image" and change the resolution. Note how the image size changes and document size stays the same.
Bottom line quality of picture is the image size in pixels. THe larger the numbers the higher the quality.

Fond size and lines in iWeb

Similar Messages

Maybe you are looking for