Font automatically deactivated problem, Font automatically deactivated problem

Hi,
I have a major problem since 2 weeks that I can't explain.
Most of my fonts are automatically deactivated. And some are really Basics.
I mean : Vedana and Times New Roman, quite essentials even for just open some software.
I have to reactivate it manually, and it takes hours....
Any idea for an issue ?
I could'nt see any case like mine on google ( or maybe I missed it )
Is there any clean possible to make ?
I made a Sophos, a cache cleaner but without effects
Tnahks by advance for your answer

About two weeks ago before this started did you download some 3rd party software? Maybe sophos, maybe MacKeeper, or something else. Figure out what it was if so and remove it according to the developer's instructions.
After you've removed any suspect software, start your Mac in safe mode, by following the instructions here:
http://support.apple.com/kb/HT1455
After safe mode has booted properly, log out and log back in again as normal.

Similar Messages

Photoshop is not affected by installation or activation/deactivation of fonts. What am I missing?

I want to use HelveticaNeue Light in a psd file. I have tried activating it in Suitcase Fusion 4 and installing it under Windows (Windows 7 Ultimate). I have restarted Photoshop several times and I deleted C:\Users\username\AppData\Local\Adobe\TypeSupport as a possible solution. I have no idea what the problem could be.
I even tried searching for fonts that are appearing in the list to see what's the difference compared to other fonts, but I didn't get smarter. I also deleted the preferences.
It just won't appear in the list. I am sure it is a working font because I am using it daily in InDesign.
I know of only 2 ways how Photoshop should be able to see fonts: Installing into the Windows fonts folder or Fonts management software. As far as I know it doesn't have a Fonts folder, like let's say Indesign. But still when deactivating all fonts in Suitcase and checking the Windows fonts folder, I saw that there are fonts in the Photoshop fonts list that are not in the systems folder nor activated in Suitcase. So I guess I am missing something here.
I would appreciate any input.
I am using Photoshop CS5
Suitcase Fusion 4
Windows 7 Ultimate

Do you have the Suitcase Fusion Auto-Activation Plugin for Photoshop?
Nancy O.

Photoshop is not affected by installation or activation/deactivation of fonts.

I want to use HelveticaNeue Light in a psd file. I have tried activating it in Suitcase Fusion 4 and installing it under Windows (Windows 7 Ultimate). I have restarted Photoshop several times and I deleted C:\Users\username\AppData\Local\Adobe\TypeSupport as a possible solution. I have no idea what the problem could be.
I even tried searching for fonts that are appearing in the list to see what's the difference compared to other fonts, but I didn't get smarter. I also deleted the preferences.
It just won't appear in the list. I am sure it is a working font because I am using it daily in InDesign.
I know of only 2 ways how Photoshop should be able to see fonts: Installing into the Windows fonts folder or Fonts management software. As far as I know it doesn't have a Fonts folder, like let's say Indesign. But still when deactivating all fonts in Suitcase and checking the Windows fonts folder, I saw that there are fonts in the Photoshop fonts list that are not in the systems folder nor activated in Suitcase. So I guess I am missing something here.
I would appreciate any input.
I am using Photoshop CS5
Suitcase Fusion 4
Windows 7 Ultimate

Do you have the Suitcase Fusion Auto-Activation Plugin for Photoshop?
Nancy O.

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Can't start laptop - problems with automatic repair, need acces to admin account but there is none. HELP! :(

Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian Collaert

Hello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can I set iWeb to automatically use my font/style/size?

Is there a way to get iWeb to automatically set the font, style and size that I want to use in my iWebpage? I want to use Optima. I went to the iWeb preferences menu but it does not mention fonts.
Last night I had to first delete all the examples in the iWebpage templates and then, thru the Fonts window, I had to click onto Optima, and then Regular, and then the size. I kept thinking about how lovely it would be if I were able to set some preferences from a different source and have the program automatically do overwrites in Optima.
— Lorna in Southern California

iWeb doesn't remember your default choice like that
unfortunately. Are you finding that you use the same
template pages though? If so, you can just
preconfigure one with your choice of fonts and text
sizes. Then just keep it blank and use it as your
"template" by 1) removing it from being displayed in
the navigation menu and 2) by duplicating the page
(select it in the organizer and right-click or
control-click to select "duplicate").
It's probably easier to just make the changes when
you want.
James, thanks, and hi. I will end up using the Photo Album and the Welcome templates the most. The Welcome templates I will use as top level theme hyperlinks to all of the examples of said theme.
iWeb is a lot of fun.
— Lorna in Southern California

Problems with Automatic Workflow Customizing

Hi!
I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
WF-BATCH has authorization SAP_NEW, SAP_ALL
My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
Does anyone know what might be the problem?
Sincerley
Anders Öhrling

Hello Anders,
Check if the user is locked in SU01. Then check if your user has been created in CUA.
It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
Do let me know if your problem is resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful -

Font book or CS2 font problem?

I am using a mac Pro, running OS 10.4.11, w/ CS2. I am having a problem with either font book or CS2. Certain fonts are not viewing correctly when I use them in CS2 programs. I get a font error when I open the file, and when I try to fix the font by choosing the same name again, the font appears as another font entirely (in fact after I closed and reopened everything the font it substituted changed, and if I choose italic it changes fonts again). I do not know if the issue is with font book or CS2, but I have installed around 1500 fonts, and have had some other minor issues when I open files in Adobe programs, with fonts not showing up even though they are installed and enabled. I fix that problem by disabling the font and then re-enabling it and it then shows up in the font list.
So after all that, my question is what should I do? Should I reinstall CS2? Or is the problem more likely cause by font book?
Thanks

Font Book is an inadequate font manager made by Apple for managing the few meger fonts Apple includes with the system.
FAP is a robust font manager made for professionals with thousands of fonts

How can I get Illustrator to automatically resize the font to a designated page width?

I want to be able to type lines of text and have Illustrator automatically change the font size so that it fits that width of the page exactly, even if on one line there are 8 words and on another line there are 2 words - I want the big and small letters effect. I was previously doing this in Photoshop manually but someone suggested I could do it easier in Illustrator so here I am....
Thanks.
Jay

each line has to be a separate text object (point text, not area text)
use this version, as SRiegel pointed out, the script was missing a line
#target Illustrator
// script.name = textBlock_CS4.jsx; // not tested on CS5 yet.
// script.description = converts selected point textFrames into a Block of Text;
// script.required = one document with at least two selected text frames;
// script.parent = carlos canto // 12/4/11;
// script.elegant = false;
if (app.documents.length > 0)
        var idoc = app.activeDocument;
        var sel = idoc.selection;
if (sel.length>1)
var width = prompt ("Enter desired Text Block width in Points", 300, "Text Block"); //
if (width!=null) // quit if pressed Cancel
var dupLayer = idoc.layers.add(); // add a layer to place the new block of text
dupLayer.name = "Text Block";
var blockGrp = dupLayer.groupItems.add(); // add a group to final output
blockGrp.name = "Text Block";
var left = idoc.width/3; // place block at the bottom 3rd of the page
var top = idoc.height/3
var spacingMM = prompt ("Enter spacing in Millimeters", 2, "Text Block"); // text lines spacing in mm
var spacingPts = new UnitValue(spacingMM,"mm").as ("pt") // convert to points
for (i=0; i<sel.length; i++) // loop thru selection
if (sel[i].typename == "TextFrame") { // continue if textFrame, ignore other pageItems
var itext = sel[i].duplicate(blockGrp, ElementPlacement.PLACEATEND); // duplicate text
itext.selected = false; // deselect it
grpName = itext.contents; // get contents to name outline group
var ioutlined = itext.createOutline(); // create outlines
ioutlined.name = grpName; // rename group
var perCent = width/ioutlined.width*100; // get scaling percentage, based on desired width of block
var scaleMatrix = app.getScaleMatrix(perCent, perCent);
ioutlined.transform (scaleMatrix); // scale outlined text
ioutlined.left = left; // position text
ioutlined.top = top+ioutlined.height+spacingPts; // top = previous item top + spacing + current item
top = ioutlined.top // get current top to use on next item
} // end if - non text frames
} // end for loop - selection
} // end check prompt for calcel
} // end if selection > 1
else
alert ("Select at least 2 textFrames before running");
    } // end at least one document
else
        alert ("There are no open documents");

Getting the default font - possible? (default fonts problem in InDesign Server CS5)

Is there a way to decide whether a font is used as "default font" for a document?
Or a simple way to see whether a font is used at all?
The actual problem is that InDesign server (CS5 ver. 7.0.3.533) returns the "default font" along with all other used fonts, when looping through the document.fonts collection. This becomes a problem when the default font is never used in the document, and is also not present. Then the (name of) the default font may also become meddled by a style that does not even exist for that very font.
This is indicated as a problem in our application... as a missing font, just as the call to InDesign server reports back. But the font (with that style) doesn't even exist.
Running the same script on an desktop InDesign CS5 (ver 7.0.4) the unused default font of the same document is not returned at all.
Thanks,
Andreas

To get the default font, just check:
app.activeDocument.textDefaults.appliedFont
Obviously this didn't solve the problem, since InDesign server has made up a font name that is reported as missing... and it's not equal to the default font. So there is some lack of logic in my previous description.

I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Can anyone help me find out if its a hardware problem???

I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Its a 1year old phone n the version is 4.3.2(8H7). Also the volume sign does not go off from the screen. Can anyone help me find out if its a hardware problem???

Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
You can always contact Apple and setup service through Express Lane.

I have iphoto previously installed. running but when i have synced my iphone4 the iphoto app. cant be launched anymore. a black screen with the hourglass running till it quits automatically. What should be the problem???o

i have iphoto previously installed. running but when i have synced my iphone4 the iphoto app. cant be launched anymore. a black screen with the hourglass running till it quits automatically. What should be the problem???

Try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home/() Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Click to view full size
OT

I just started to have font problems, fonts deactivate as soon as they are activated

I just started experiencing font problems, fonts deactivate as soon as they are activated. I noticed that in my emails the fonts were suddenly bold and I can't use passwords on Safari in some cases. Has anyone experienced this?

Contact the email provider for assistance with their service.

Whenever i play something or do something in mozilla, it automaticly goes back to homepage. the problem is with other browsers too? Could anybody help.

Whenever i play something or do something in mozilla, it automaticly goes back to homepage. the problem is with other browsers too. It is very annoying . It does it randomly

Do you mean that Firefox closes and restarts automatically?
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open the crash reports page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Problems font on iPad

Hi,
i'm using DPS CS6 since 2 months,
i just finish my work for my client.
My problem is the fact that my font look awful on my iPad (it's a 3)
I buy the destock and the web font but the font is still not clean on my iPad.
I must have forgot to do something but i don't know what.
I can't find a solution on the DPS pdf or on any tuto yet.
Is there any one who can help me ?
Thank you

Tank you very much
Envoyé de mon iPhone
Le 25 juin 2012 à 17:29, Neil Enns - Adobe <[email protected]> a écrit :
Re: Problems font on iPad
created by Neil Enns - Adobe in Digital Publishing Suite - View the full discussion
You select PDF format when you create the folio in the Folio Builder panel. The dialog when you create the folio asks what default format you want, and you can select PDF.
Also, when you add the article using Folio Builder, you can always override the folio default and select PDF.
Neil
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4518695#4518695
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4518695#4518695. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Font automatically deactivated problem, Font automatically deactivated problem

Similar Messages

Maybe you are looking for