Font Book installation problem

I just got the new iMac 27", and are having problem with Font Book.
Everytime I install a font package I get error messages... these fonts are purchased from FontShop or others, and never had problem with previous systems in the past. Anybody has an idea what is change in Font Book and how to get arount it?
One example: Install Gotham HTF (from Font Shop)
Font Validation window poped up
Message: 20 serious errors were found. Do not use these fonts.
If I 'force' it by Select all fonts, and Install Checked.
It install the fonts to "User" not into the fold I created. With Adobe Illustrator, only one style is usable (out of 3 that was in the package)
These fonts are licienced, and were used in all systems I had before... still work on iMac 24" white. Same problem is on Macbook Pro which is also runing 10.8.3.
Thank you.

You might try restoring the fonts from the original, if you can.
It'd be hard to say without looking at the font whether I'd ignore it or not. A bad FOND Bounding Box could cause problems like this:
Notice the abnormally large amount of space between lines.
A font's 'FOND' resource contains information about the fonts in a particular font family, and includes several "tables" that provide information about the font: style-mapping table, kerning table, family glyph-width table, offset table, and bounding-box table.
"The bounding-box table, shown in Figure 4-26, contains the bounding-box measurements for a 1-point font. The bounding boxes used in this table are similar to the font rectangle, since each describes the smallest rectangle that encloses the shape of each glyph in a given font. There are separate bounding-box entries in the table for different styles."(see The Bounding Box Table)
As long as the font seems to display okay, it should probably be okay to use.
Hope this helps....
Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM Mac OS X (10.4.5)

Similar Messages

MAJOR iMAC FONT BOOK BUG PROBLEM

Hi there,
Not sure if anyone can help me out there but it would be great to get some suggestions.
I'm having a major fontbook problem on my imac as of yesterday. I'm a graphic designer and for me this is an aboslute nightmare - a horror story. I lost all of my downloaded fonts yesterday (i opened font book because it didn't upload a new font that i had downloaded and wanted to see what was going on) and got the shock of my life. I am now having major issues with this software. On top of losing all of my downloaded fonts, I can't upload any new fonts anymore and for some reason it now has alot of chinese/hebru fonts loaded into it which is baffling.
I've been searching all over google for a way to resolve the problem and have no idea what to do now, nothing is working
Please help!!

amlogan wrote:
for some reason it now has alot of chinese/hebru fonts loaded into it
By default Fontbook has a large number of chinese, hebrew and other language fonts in it so that OS X can support 33 system localizations and several dozen keyboard input languages without adding any.
http://support.apple.com/kb/HT5944

Font Book validation problem when adding fonts

I installed 10.6.2 last night and then turned the machine off as normal.
This morning I start up and every action is followed by 10-30 seconds of spinning beachball action.
The only process using up more than about 2% was fontworker which I've since found out is the startup font building/analysing/caching part of Font Book.
I've read the suggestions on here about removing font caches, removing font libraries, etc. and have tried them all.
The only way I've managed to get the system back up to 100% is to remove all fonts from my libraries (1500+ fonts) and run with just the system fonts installed.
The problem I now have is that every time I try to add a font, the Font Book validation progress bar comes up, stays there for a minute or so per font and then says there's a serious error and it can't be validated and must not be used.
I've tried it on lots of different fonts from lots of different sources (Adobe, Monotype, Microsoft, T22, Linotype, even some I've done myself with Fontographer/Fontlab) and the symptoms are identical.
Any help happily received.

Normally that would work, however I've already tried that - and to the other 2 font folders just in case - and I get no more fonts listed in my menus than I already had.
Just for clarification I've tried them in:
- Home/Library/Fonts (i.e. my user account folder)
- /Library/Fonts (at top level)
- /System/Library/Fonts (at top level)
I've tried restarting with them in one folder at a time, then tried it again with them in all 3 folders.
I should have followed the rule "If it ain't broke, don't try to fix it." as 10.6 and 10.6.1 were working fine, as was 10.5.

Font Book - after 10.5.2 update, font has no preview and doesn't work

Help me, this problem is driving me crazy!
I've done a clean install of Leopard 10.5.0 on my MacBook Pro, on an external firewire drive (I want to keep my Tiger install as is at the momement). I install the adobe postscript Type 1 font Carta, which is a map symbol font, in Font Book. Font Book shows the preview of the font, which looks fine. I download a fresh 10.5.2 update and install it, restart. Now in Font Book, no preview of the Carta font, the preview window is blank, or it shows whichever font was displayed before, ie if I click on Arial then on Carta, the preview of Arial remains. Double clicking on the font itself opens Font Book main window, but no preview. The Opentype version of this font does exactly the same thing. Font Book validates the fonts as being okay.
When it comes to applications, Word 2004 will display the font, but character spacing is all over the place. Indesign CS3 will display the first 96 characters correctly, but after that it puts in a 'missing font' highlighted space. Opening the font with Linotype FontXplorer, the preview shows the font, though it seems to be missing the 'Z' and 'z'. Character Palette shows all glyphs in the font correctly, but double clicking on any above the first 96 puts in a 'missing font' space in Indesign. The trouble is the characters I need to use are all above this point in the font! Basically, it seems that the OS update has changed the font mapping.
The Font Book preview problem doesn't just happen to Carta, it seems to happen on a number of other fonts, mostly symbol fonts, some that I've created using Fontographer. All work perfectly in OS9 and 10.4.11. Even more annoyingly, other colleagues with different Macs on 10.5.2 are having no problems. I have done all the usual voodoo of deleting font caches, rebuilding permissions, even gone back to the font CDs to get the originals, reinstalled, etc.
I have installed Leopard from 2 different DVDs, on two different intel machines (a MacBook Pro and a Mac Pro), and swapped the Firewire drive onto a G4 (I installed it so it would boot both the G4 and the MBP), and always the same result. I'm going to install an HD internally on the G4, install Leopard and see if the same thing happens.
Anybody got any useful suggestions?

I'm slowly getting to a solution, or at least a reason, for this problem. It seems that Leopard has tighter requirements on fonts for the languages they support. The Carta info in Tiger looks like this:
!http://www.biscuit.demon.co.uk/carta/cartainfotiger.gif!
Whereas under Leopard it says:
!http://www.biscuit.demon.co.uk/carta/cartainfoleo.gif!
Indonesian as the language under Leopard?! All the other fonts that I have problems with generally have NO language when I look at the info panel under Leopard AND Tiger. But Tiger seems to cope with them with my language set to British English. At least this may explain why the character encoding goes a bit crazy under Leopard.
Out of a peculiar sort of masochistic interest, I went through all of the default languages, plus a few others, that Leopard installs, seeing the effect of changing the language on the Font Book preview. I should just say that the Font Book Repertoire is always the same for all the languages, and the same info is displayed each time too. I'm now convinced it's the character mapping that changes when different languages are selected as the default.
Font Book Repertoire:
!http://www.biscuit.demon.co.uk/carta/cartaenglishrep.gif!
All the following languages displayed the preview correctly: English, Francais, Deutsch, Espanol, Italiano, Portugues, Svenska, Norsk Bokmal, Dansk, Suomi.
The preview looked like this:
!http://www.biscuit.demon.co.uk/carta/carta_english.gif!
The following languages showed the same behaviour as British English, in that NO preview showed, it would display the font preview of the previously selected font: Portugues (Portugal), Austalian English, Canadian English, US English, Espanol (Espana)
Changing to languages with different alphabets tended to show different things. Not sure if I've correctly identified the languages.
The two Chinese (I think) languages - AaBbCc characters only
Japanese (I think) - a to m, A to M, numbers 1 to 0
Korean (I think) - two arrows usually mapped to singe and double quotation marks, and ABcdEFgh 1234567890 - see this image:
!http://www.biscuit.demon.co.uk/carta/carta_korean.gif!
Russian (I think) - 1234567890 ("*#%&@`)
Polski - This produced the most, dropping several characters from the main alphabet, but adding a load that usually map to ("*%&') - see below:
!http://www.biscuit.demon.co.uk/carta/carta_polski.gif!
This all means that I have to stick with "English" as my Language, rather than "British English". I have yet to reinstall CS3, but I'll do this without changing the language, and hopefully CS3 with get the encoding correct.
Questions? Comments? Sorry about all the images.

HT2509 why can't I install Decker Font in Font Book. I have Lion

I have been trying to install the font Decker into my Font Book for a job I'm doing but it will not install. Has anyone else had this problem and has been able to solve this dilemma? If so, can you help me out?
Thanks,
Deb

From legit sites and I'm downloading it, unzipping it and putting it in my font book but my font book has 'problems' with this font and will not install any of the Decker.ttf fonts I've tried to install. I've gone to sites to buy the font too.
I also don't know why I have Font Book 198.4 when I have Mac OS X 7, I think I'm supposed to have Font Book 3. I can't seem to find out if that's the issue....
Any thoughts?
Thanks

Lion Font Book problem with Adobe FontFolio 11

I have a fresh install of Lion. My problem is with FontFolio 11. It installs well, finds duplicates etc. The problem happens only after i deactivate all of the fontfolio fonts. After they have all be deactivated, if I click on any other font collection, fontd jumps up to 99% CPU usage and Font Book not responding. After 5 minutes of this Font Book's Real Mem usage slowly starts to increase, sometimes up to 3 gigs. Eventually, I am able to click through collection with no delay, however, after a system restart or just a Font Book restart, the process starts over and i have to wait.
I have tried:
Clearing every font cache file I can think of.
Using Font Finagler to clear font caches.
Restarting in safe mode.
Creating a new user.
Nothing has made this problem go away.
So, what exactly is happening? Why is Font Book fast and responsive with my 427 fontfolio fonts active, but when i deactivate them it slows to a crawl and goes through the same CPU/memory cycle every time? I have research and experimented for a solid week. I can't waste any more time on this. I'm this close to giving LION and Font Book the big thumbs down and buying something that actually works.
I never had a problem with snow leopard using Font Book and the same version font folio.

Same here. My thread: https://discussions.apple.com/message/15995212#15995212
I've had no replies. Have you looked at Activity Monitor while this is happening? check it out. I think i'm just going to go back to Leopard, don't know what else to do. Do you have an SSD in there?

My fonts that are installed in Font Book are not showing up in Microsoft Word. Can someone help me fix this problem?

Hello!
I am needing some help. I own a Mac Book Air with OS X 10.7.5. This computer belongs to the school district I teach for, so I do not have permission to do a huge wipe that would uninstall programs such as Word. When I first got my computer, I added all my fonts. I did this by putting them into a fonts folder. The fonts were not all showing up in Microsoft Word, so I was told to use Font Book. All of my fonts show up and are installed in Font Book; however, they do not show up in Word. I have restarted my computer. All the fonts are validated. I have tried almost everything I could think of after researching answers online. Another problem--my bullet points are messed up. When I click the bullet button, instead of an open circle it's an open rectangle. This doesn't concern me as much, but I thought it might help as a clue as to what is wrong. The fonts also do not show up in the Format > Font box.
Also, I want to point out that my colleagues, using the exact same computer, network, etc, are able to download and use all the fonts. They have tried to fix mine, also.
Any help is much appreciated! Maybe there is some way to wipe out my fonts and start clean?
Thanks so much!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Font Book problems under 10.5.5

After updating to 10.5 and completing Software Update immediately to 10.5.5, I have noticed some quirks in Font Book. I did not use Font Book after the installation/upgrade from 10.4.11 to 10.5 until 10.5.5 was operational.
1) I have over 400 font families, but all but about 50 are normally inactivated. The new Font Book is slow as molasses to show any fonts the first time it is opened on a fresh boot. Former versions would start showing some of the fonts and add to the list as the files were read from the library by Font Book. Now it sits and sits until all have been read to display anything (close to 15 seconds). At least before one knew if it was working and not just showing a spinning beach ball. Doesn't seem a change for the better.
2) Font Book used to show all fonts quickly once it had been opened under a current startup of system. Now there is a lag in the display (8-10 sec), but not nearly as bad as current initial openings, but longer than the previous system version.
This next point is REALLY annoying:
3) When inactivating a duplicate of a font face (i.e. inactivating the TT version when want only the PS1), I can click on the style to be inactivated and before I can get down to click to inactivate BOTH styles become highlighted so I will deactivate/activate both if I don't watch what is happening. This happens virtually every time I do this procedure and never occurred in versions prior to 10.5.5. (Since I didn't use anything on the computer until I updated to 10.5.5, I don't know at what point of the 10.5 cycle this might have begun.)

I am in publishing and have a true postscript laser printer. Font are not just regular type, but phonetic, language and music fonts. Given a choice, I will take PS over TT anytime and I have a large investment in Adobe fonts..
Bad fonts aren't installed and I disable duplications when they occur with PS/TT/OT fonts.
I still make the point that I am using exactly the same fonts that were used with 10.4.11 - nothing added or deleted, the same ones active or inactive. Font Book did NOT behave this way until I upgraded to 10.5.5 from 10.4.11.
(For those that don't remember their history, TT was developed by Apple and adopted by Microslop because they couldn't conveniently deal with PS.)

FONT BOOK 2.0.2 - Problems installing fonts

I am having problems loading fonts into Font Book 2.0.2 - I have been using Font Book 1.0.2 on two other macs and have had no problems loading any fonts. Using my new Mac (OS X 10.4.3) with the latest version of Font Book is proving to be very problematic as fonts such as INTERSTATE just will not load into the software.
Does Font Book 2.0.2 not work with some fonts that do work in previous versions of the software?...
Do you have to run OS Classic for some fonts to work in Font Book...?
Very fustrating..! - Thanks in advance to anybody for their help with this.
Dancho
i Mac G5 (Dec 05) Mac OS X (10.4.3)

I am having problems loading fonts into Font Book 2.0.2 - I have been using Font Book 1.0.2 on two other macs and have had no problems loading any fonts. Using my new Mac (OS X 10.4.3) with the latest version of Font Book is proving to be very problematic as fonts such as INTERSTATE just will not load into the software.
Does Font Book 2.0.2 not work with some fonts that do work in previous versions of the software?...
Do you have to run OS Classic for some fonts to work in Font Book...?
Very fustrating..! - Thanks in advance to anybody for their help with this.
Dancho
i Mac G5 (Dec 05) Mac OS X (10.4.3)

Font Book "finds 80 minor problems proceed with caution"

Just happened to discover this. When I select All Fonts and then validate it comes back and says that there are 80 minor problems proceed with caution. What does this mean? I don't think I have been having any problems. It appears that when you look at one of the fonts that have a problem there actually two of them listed. It tried to resolve duplicates and it makes no difference.

I wouldn't trust them if Font Book doesn't like them, bad fonts can really mess up OSX itself.
Mac OS X 10.4: Fonts list...
http://support.apple.com/kb/ht1538

Font installation problem

Hi
I have problemin installing font.
I used Suitcase X1 for long time and now, after unistall it, when I try to install a font using Font Book, the font is not installed.
When I try to add the font to Font Book using CMD+O often Font Book Crashes (But the font are added to User/Library/Fonts/ )
I used several tools such as Applejack, FontNuke to clean the cache and repair the permissions and prefs but nothing happens.
Is there anybody can help me?
Many thenks.

Try setting Font Book Preferences ...
Open Font Book and choose Font Book > Preferences.
Choose from the following preferences:
Default Install Location: To make the fonts you install available only to you, choose User, which installs fonts in Library/Fonts/ in your home folder. To make fonts available to all the computer’s users, choose Computer, which installs fonts in Library/Fonts/ at the top level of your hard disk.
Validate fonts before installing: Select this checkbox to automatically validate all fonts before they are installed.
Validating fonts
Automatic font activation: Select this checkbox to enable fonts on your computer whenever they are needed by an application, even if you haven’t installed the fonts using Font Book. For example, if someone sends you a document that uses a font you haven’t installed, but the font is in your Documents folder, Font Book will find and enable the font so the document appears correctly.
NOTE: If you turn off Spotlight searching for any folder or any disk connected to your computer, Font Book can't find and enable fonts in those locations.
Ask me before activating: Select this checkbox to have Font Book ask for your permission before automatically enabling a font.
Alert me if system fonts change: Select this checkbox to be alerted before changing any fonts used by Mac OS X to display onscreen text.
Carolyn

Font Book problem

When I find a font I think I'll use someday I save it as link source. I have been noticing when I install fonts,the Font Book install window tells me not installed (see attachment, bottom left)
I see it in the book,I even use it , no problem. But why is it, the install process does not recognize it is already installed, even after I just installed it.It reads not installed after a restart also, but it is there.

I download from web, to my download folder .(tried) to show pictures but I can not, anyway, the file is a .ttf file(most are). I double click it , it opens it gives me the option to install,I click install, FontBook comes up with it installed but if I open the .ttf file again it says not installed, but it is. It just seems that it should show I already have it installed, so it is not installed again. is that more clear.?I'm not so good with punctuation.

Font Book problems installing fonts - serious issues

I'm having problems installing fonts that I've been using for years. The Mac Mini Font Book says that there is serious problems with a lot of my fonts.
I don't want to install fonts if it is going to cause problems with the computer but don't understand why they won't work on mini but were fine on the emac.

gangof4 wrote:
Where can I purchase additional fonts?
Try typing "fonts" into Google. Have you really not done that?

Font book or CS2 font problem?

I am using a mac Pro, running OS 10.4.11, w/ CS2. I am having a problem with either font book or CS2. Certain fonts are not viewing correctly when I use them in CS2 programs. I get a font error when I open the file, and when I try to fix the font by choosing the same name again, the font appears as another font entirely (in fact after I closed and reopened everything the font it substituted changed, and if I choose italic it changes fonts again). I do not know if the issue is with font book or CS2, but I have installed around 1500 fonts, and have had some other minor issues when I open files in Adobe programs, with fonts not showing up even though they are installed and enabled. I fix that problem by disabling the font and then re-enabling it and it then shows up in the font list.
So after all that, my question is what should I do? Should I reinstall CS2? Or is the problem more likely cause by font book?
Thanks

Font Book is an inadequate font manager made by Apple for managing the few meger fonts Apple includes with the system.
FAP is a robust font manager made for professionals with thousands of fonts

Font Book Problem - Cannot see validated fonts in QuarkXpress

We are trying to view the fonts that we have loaded into the font book from QuarkXpress. We can see the fonts in Adobe Design Premium apps (Photoshop, Illistrator, etc.) but not in Quark 7.3.1. The fonts validate fine in the book. We have tried removing Quark and reinstalling it. We have tried booting into safe mode to clear out the font cache. We have done a permissions repair, verified permissions manually for user accounts on the new font folder that is created, and removed and readded the fonts under the user and the computer sections of the font book. The fonts are ITC Kabel fonts. They work fine on another Mac that we are running Leopard on as well, but they are not visible through QuarkXpress from a different user account on this same Mac with the problem. The only thing that I can think of is a system reload using the restore settings option to keep her settings? Any ideas would be greatly appreciated! Thank you!

Since we have reloaded Quark, I may try doing an install and archive on the OS. Maybe this will correct the problem?
Maybe, it depends on what's wrong with Quark. It could be that the OS is indeed damaged and preventing Quark from operating properly. But it still could be another instance of Kabel being active. You searched for Kabel by name, but that's not how fonts actually work.
Say you have a Word document on the desktop named "Budget report April 2008", but when you open it, the text is a grocery list. Fonts fall in that category. The name of a font you see on the desktop has nothing to do with the name that may show up in your programs. All fonts have an internal name. That's the one that gets reported to the system and is displayed in your applications.
A suitcase of TrueType fonts can have up to 999 fonts stuffed in it. There's no telling what you'll get in your font lists until you activate the suitcase. So it's entirely possible you have Kabel as a font that's named something else on the desktop, or you have a suitcase of fonts active that has a font declaring itself as Kabel in it.
Before going through an Archive and Install, create a new folder on the desktop. Move every font in the /Library/Fonts/ folder and the Fonts folder of your user account into the new folder. Use Font Finagler to clear the system's font cache files. Let the Mac restart.
Now move just the font named Kabel back to the folder it was originally in. If it now shows up in Quark, you had a font conflict with something else you moved out of the Fonts fodlers.

Font Book installation problem

Similar Messages

Maybe you are looking for