Font Book "not compatible" with 10.9 after upgrade from 10.7

I upgraded from os x 10.7 to 10.9 on my iMac and now my font book won't open. I keep getting a message that says my version of font book is not compatible with 10.9. Is there a way to reinstall font book?

No,
You should download and install the 10.9.4 combo update. OS X Mavericks 10.9.4 Update (Combo)
As with any system upgrade or update it is wise to backup first.

Similar Messages

Adobe Type 1 Font is not compatible with Windows 8 64bit?

I found that Adobe Type 1 fonts are not compatible with applications that run on Windows 8 64bit. When used, the appearance of fonts on the screen is not correct. Even worse, the font does not appear at all in the CorelDRAW X6. Strangely, when printed, the fonts were no problems. How can I make these fonts can be used in Windows 8 64bit? For additional information, these fonts appear normally when reviewed through the Windows Fonts folder, but does not display correctly when used in the application.

I believe I have a similar issue. I do have the latest Windows updates.
I'm on a new Win8 system, and I installed my Adobe type collection (bought years ago with ATM) by copying the .pfm and .pfb files to Windows\Fonts (there's no right-click > install for fonts on Win8 it seems; copying the font files to the font directory is what I've read as the install procedure.)
Windows then shows an error about .pfb incompatibility, so I selected "skip" for those files.
The result is that my fonts are installed and usable BUT this really screws up IE10 for certain websites. For example, I get blank pages for sites like wordpress.org and validator.w3.org. There doesn't seem to be any way to fix this other than doing a system restore to a point before the fonts were installed. Removing the font files from the Windows\Font directory doesn't help. I don't use IE10 with any regularity but I need it to work for testing purposes.
Is there a way to install these fonts? Is there a way to uninstall them (other than a system restore) if they affect IE10?
It's really hard to install on a one-by-one basis as need arises because I can't tell what the font names are from the file names. There's no application, like a type viewer, that will show me the fonts if I double click the file. (I just ran into this now... I need to use a Garamond type face but have no idea which one it is by looking at the .pfm and .pfb files.)
I would consider buying Font Folio if this is the answer but it's only available for a minimum of 5 licenses? I'm a freelancer and only need one licence.
Should I just use an online tool to convert my .pfm/.pfb files to an OpenType or similar format?
Thank you in advance!

I'm running OS X 10.5.8 & Firefox says that my computer is not compatible with the most recent upgrade. What am I missing? Thanks!

I'm running OS X 10.5.8 & Firefox says that my computer is not compatible with the most recent upgrade. What am I missing? Thanks!

The last version of Firefox which is compatible with PPC architecture is Firefox 3.6.x. 
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . 
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/

Ts-L633a DVD drive not compatible with Windows 7 64bit upgrade

Ts-L633a DVD drive on my Pavilion Dv7 1232nr is not compatible with Windows 7 64bit upgrade but will work fine if I downgrade back to Vista 64bit so what DVD drive is there other then the TS-L633a drive that I already have that is compatible with the Windows 7 64 upgrade so that I can buy and install on my laptop.

Here's one out of nowhere: do you have CD/DVD software that includes Sonic DLA or something like it? I've seen that take over drives and prevent normal operation.
If you right click on the drive and hit properties, are there any suspicious looking tabs?
Total WAG, and about 1% likely, but there you go.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

Problem with Java Script after upgrade from BW 3.5 to BI7

Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej Bobula

Hi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
3.5
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
7.0
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Universal Worklist UWL not working in NW04s SPS9 after upgrade from NW04

Hello all,
this is just a hint in case anyone has the same problem with the UWL.
It happened to me in 2 cases, that in a Portal 7 SPS9 the UWL only showed a blank page after upgrade from NW04. In NW04 the UWL worked.
The reason for it was something like a corrupt deployment (but there were no according error messages in any log files). The SAP Support told me to redeploy the UWLJWF*.sca according to note 895523, that worked.
You can check whether the deployment is the reason of a non-working UWL setting the property "Launch Web Dynpro UI" to 'no'. Then the old HTMLB sources (that should work) are used (But it is not recommended to use the old sources anymore)
Kind regards
Andreas

.. just a hint ..

Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

Hi,
We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
Thanx
deepak

What kind of problems?
I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
This is your best bet.
If you still have problems, contact NI and ni.com/ask and start a support inquiry.

"charging not compatible with this device" after IOS 4.3 update.

I have a belkin car adaptor that I have been using for some time, after installing IOS 4.3 I've been getting the error message saying it isn't compatible and so it refuses to charge my phone, this is important as I use it to charge my iPhone as I use it as a GPS device, i dont see how this problem has come about as prior to IOS 4.3 it charged perfectly!
Could I have some advice on this and fingers cross that apple reads and acts upon this forum!

I've also had this issue with charging since upgrading to iOS 4.3.1 Actually upgrading to 4.3.2 and then to 4.3.3 has not solved the charging problem. Here's my story:
I own an iPhone 3GS and started noticing error messages with 4.3.1 such as "charging is not supported with this accessory". I've tried differnent USB cables and chargers (Apple and non-Apple), hooking up to computers and wall outlets. I get the same message. As a last resort I restored my device as a new phone (syncing works oddly) and erasing everything. This did not help the situation.
So yesterday I took my 3GS to the Apple Store and they were kind enough to replace my iPhone with a new (refurbished) 3GS under AppleCare. That was awesome - I love Apple. However, that didn't fix the problem
So now I'm not sure what to do accept wait for a new iOS version and hope Apple addresses this problem. Anyone else have a similar experience?

Import via Drag & Drop not working with LR CC (after Update from 5.7)

I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
This does not work with LR CC anymore.
The longer way via "Import" works fine.
Any suggestions?

With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
What works with your setup doesn't work with mine.
I attached a screenshot:
As you can see (cursor) i can't import the file from the file explorer on the right.
(The file is not already in the catalogue and i am in the library tab grid view mode).
Using Windows 7 x64 prof Service Pack 1

Mavericks Mail not working properly with Exchange server after upgrade from Lion

Mail will no longer maintain a stable connection to my company's Exchange server after upgrading to Mavericks from Lion. Nothing has been changed on the Exchange server. It has only partially downloaded the messages that are on the server. It seems to download current messages when they hit the server. It has difficulty sending messages. When I send a message, it gets stuck in the Outbox. It is constantly losing the connection to the server. The problem is only occuring with Exchange email. My iCloud email works properly as well as a POP3 account.

No shortage of pre-existing threads on Mavericks mail issues...
https://discussions.apple.com/message/23706759#23706759
https://discussions.apple.com/message/23469853#23469853
https://discussions.apple.com/message/24277596#24277596
https://discussions.apple.com/message/23769976#23769976
https://discussions.apple.com/message/19077388#19077388
https://discussions.apple.com/message/24170482#24170482
https://discussions.apple.com/message/24483692#24483692

Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

Hello together,
The system of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
In the Billing Due List a dump occurs when clicking on an item and then on conditions
Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
(Other classes are new generated after the upgrade)
During the Analysis we looked to the billing engine navigator:
In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
BR, Anne

Hi Nawanit,
we checked the key figure settings and categories. Everything is maintained correctly.
Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
"Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
As far as we work with ECC 6.0, EHP4 this message makes no sense.
Does anyone have another idea?
Thanks
Jan

Screens not working in ECC 6 after upgradation from 4.6c.

Hi,
The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
Regards,
jinesh kumar c.

Hi,
Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
Because some times we get Dynpro errors for transportation of the screens.
Reward if useful.
regards,
Anji

Problem with field catalog after upgrade from 4.0

Hi experts,
We have recently upgraded from CRM 4.0 to 5.2.
I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
Any comments or suggestions will be highly appreciated.
Best regards,
Anders

Hi,
If you did just install database, then you use Embed PL/SQL Gateway.
See this guide
Upgrading Oracle Application Express in Oracle Database Express Edition
I think you have not run step 5 script apxldimg.sql
Regards,
Jari

Font Book "not compatible" with 10.9 after upgrade from 10.7

Similar Messages

Maybe you are looking for