Font Capture application error

I've just bought Adobe CS5 Design Standard, and while Photoshop and Ilustrator have installed perfectly, I get the following error when I try to open InDesign: Font Capture: InDesign.exe - Application Error.
I'm unable to uninstall and reinstall Indesign only, as it seems the entire Creative Suite is a single file in my file manager. Does anyone have advice for me?

Hi Peter
Many thanks for your response. I ended up on the phone to Adobe tech
support, and eventually (hours later) it seemed that all the InDesign
plugins on the disk I bought were faulty, so new plugins were downloaded to
replace the old ones, and now my InDesign is working.
I'm not sure if this is something that might affect all CS5 InDesign users
though.
Thanks again for your willingness to provide assistance, but the good news
is that the problem has been sorted out.

Similar Messages

Capturing Application Error log from SXMB_Moni

Hi,
I wanted to capture the error information from Application error log from ECC sxmb_moni and forward that as email alert.
We have already alert configuration in place with alert category using standard variables. Was wondering if I have to capture application error log from sxmb_moni what would be steps involved. Please let me know if anybody has worked on this and appreciate your help on this.
Sample Error message from sxmb_moni of ECC system
MT_Fault
Error in Application System
Detailed Information
Process Order invalid
Thanks
Selvam
Edited by: Selvam_muthu on Jun 23, 2011 5:40 PM

Hi Selvam,
As the exception is raised in ECC system, alert cannot be trigger, alert will get trigger when there is a error in PI system. To raise a email, write additional code in ECC to trigger the e-mail with proper error content

Forwarding Application Error in ABAP Proxy to CCMS

Hi,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
Best regards,
Rahul Kumar

Is there a way of getting the above thing done? I have a very similar Issue.
Rahul if you have found out a way of doing the same please let me know by email. [email protected]
Thanks,
Karthik

Forwarding ABAP Proxy Application errors to CCMS of ECC

Hi All,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
thanks,
Karthik

Solved on my own.
If you need information please contact [email protected]

Font Capture: PhotoShopServer.exe error - Application Error

I recently installed Premiere Elements 10 and, after a couple of days, I get the following error on OS boot:
Font Capture: PhotoShopServer.exe - Application Error
The instruction at "0x103ed4b3" referenced memory at "0x00000a74". The memory could not be "read".
PE _seems_ to work, but does some strange things from time to time. I need to correct this error, and hope it resolves the strange PE behavior. I've seen other postings of the same error in PhotoShop and Encore forums with no resolution. Certainly someone at Adobe must know what causes this. Thoughts, anyone?
Running XP Pro 32 bit with SP3 on Dual Core 2.2GHz with 3GB RAM available.
Thanks for your suggestions!

Well we're all ordinary users here, so although occasionally an employee may post you cannot guarantee it. Your best bet is to contact Adobe Support using the buttons at the top of the page.
There are however some basics that you should look at first: PrE Hanging, or Crashing - Some Tips. If you need additional help then the following article will list the type of information we need: Got a Problem? How to Get Started
Cheers,
Neale
Insanity is hereditary, you get it from your children

Font Capture: PhotoshopServer.exe - Application Error (PSE 10) Any suggestions?

Font Capture: PhotoshopServer.exe - Application Error (PSE 10) Any suggestions?

First, go to Windows Update and select the Custom option so that you can install ALL of the latest updates -- including the non-critical ones. This will ensure you also have important updated drivers and software updates.
Then, for good measure, I recommend running Advanced System Care Free on your system to give it a good tune-up. An XP computer is between 5 and 12 years old, and that's a lot of time to gather up a lot of junk and temp files.
http://www.iobit.com/advancedsystemcareper.html
And of course ensure you have the latest version of Quicktime from Apple.com, per the program's requirements. And then go to the Help menu of any Adobe product and Check for Updates.
Then reboot.
If that doesn't fix it, it sounds like you may have a corrupted font. But that may take some troubleshooting to determine.

Font Capture Error on launching Illustrator CS3

Hi
When i try to launch Illustrator CS i always get this error and then the program crashes.
FONT CAPTURE:ILLUSTRATOR.EXE - FATAL APPLICATION EXIT
The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS3\Client\3.0.0\VersionCue.DLL
i have tried reinstalling many times but i always get this error. Im running Win Vista Ultimate. Can anyone please help as its a pain not being able to run Illustrator. The other program in the suite eg Photoshop and Indesign all work perfectly and the error is just with Illustrator.
thanks

Try the solutions in this document: http://www.adobe.com/go/kb403266

InCopy CS5 crashes with "Font Capture..." error

I've installed InCopy CS5 on my Windows XP machine but somehow something is going wrong with saving the preferences.
I get an error:
Font Captur: InCopy.exe - Application Error
The instruction at "..." referenced memory at "...". The memory could not be "read".
I've done some searching and found this solution:
1.     Quit InCopy.
2.     Rename the InCopy Defaults file (for example, to InCopy Defaults .old) in the C:\Documents and Settings\[username]\Application Data\Adobe\InCopy\Version 7.0 folder.
3.     Rename the InCopy SavedData file (for example, to InCopy SavedData .old) in the C:\Documents and Settings\[username]\Local Settings\Application Data\Adobe\InCopy\Version 7.0\Caches folder.
4.     Start InCopy. InCopy creates a new preferences file.
But, this is only temporary, and has to be done every time when I want to work with IC.
Is there a permament solution for this problem?

That is a sign that your preference files are becoming corrupt. Something is wrong with your system if this is happening regularly.
Bob

Font Capture Error - Reader will not start

Hello Everyone,
I am currently having an issue with Adobe Reader 9.1 were the application will not run when you try and start reader you get the follow error message:
Font Capture: AcroRd32.exe - Application Error
The instruction at "0x0802fef9" referenced memory at "0x0000000c". The
memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel
I found the following information in regards to this error however it didn't solve the issue.
Clear temp file
Clear adobe arc files
check for spyware and virus
uninstall and and reinstall the app
replacing fonts folder in win dir
New profile for the user
If you have any information on this issue please comment solution.

You may want to try and ask in the Reader forum. This one is for Adobe Acrobat. Good luck.

Font Capture and Photoshopserver.exe Error Messages

Often after using Encore CS4 and/or Premiere Pro CS4 I try to shut down my computer but I ger error messages about Font Capture and Photoshopserver.exe. Any ideas?

Hey Sneedbreedley,
I do have the same problem with Premiere Pro CS4 running on a PC (Windows XP Prof. 32-bit SP3)
It crashes randomly. My system meets all minimum requirements. Tried to reproduce the error, but no chance. I updated all drivers and Adobe updates, but nothing changed.
I am editting in a "Sony XDCAM EX 1080p" Sequence using material from the PMW-EX1 and Canon EOS 7D. The material of the 7D causes a lot more crashes than the EX footage.
In adition to the Font Capture error I get also this error:
Premiere Pro Debug Event:
[...Src\RemoteImporterModule.cpp-282]
and
PhotoshopServer.exe - Error in Application:
... "0x00a8cacc" directing to memory in "0x00000014". ..."read" couldn´t access the memory.
Does somebody have any ideas? I searched the web for some time no, but couldn´t find any solutions. Even if it isn´t Adobe´s fault, they should figure out the issue, because there are severel users having the same problem. I am thinking to update to CS5, but I actually would like to put my energy into my work and not into any system issues.

Error font capture acrodist.exe starting Distiller

Adobe Acrobat 9 Standart Vers. 9.1.0
I can not create PDF get the error message more Error " font capture acrodist.exe starting Distiller"
I have Adobe deinstalled and reinstalled no solution.

Hallo *
registry key

How to capture last error in Application

Hi,
I have an application running in D2k with backend as oracle9i,now sometimes oracle exception pops up,but its not reptitive,like i would like to give example.
Query is fetching more than one row exception, actually very large amount of code is there ,with no proper exception handling...so modifying all code at one go is impossible,so i want to know any method which tell me which query or statement raised the oracle error in a particular session ,as I see sql_trace ,i think its not meant for that ,Is it ?
So please suggest me what can be done.
Regards,
Sandeep

I'm trying to get into a website and this is the message I get:
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Photoshop Service Application Error

I just installed Premere Elements 9. When I open Organizer in the Premere Elements welcome screen I get the message
Font Capture: Photoshop Service.exe Application Error
The instruction at "0x103e8453" referenced memory at "0x0000a74". The memory could not be "read". Click on OK to terminate the program.
Since I had no other choice I clicked on OK.
In the past I have hade a problem with Elements Organizer - Each time I opened Organizer the region/county box appeared. Now, Organizer no longer requests the region / country when I opened it.
Can any one tell me what all this means and should I be concerned about the Photoshop Service.exe application error?

I'd recommend you contact Adobe Tech Support with this one. It's not a typical issue by any means!

Acrobat 8.1 Pro Error AcrobatInfo.exe - Application Error

Ever since updating to Acrobat Pro 8.1, I keep getting an error message.
Font Capture: AcrobatInfo.exe - Application Error
The Instruction at "0x03da593c". The memory could not be written.
The error pops up several minutes after closing Acrobat. I wonder if it is from a .pdf from across the network.
Doesn't cause a crash but it is getting annoying.

Jeremy,
All I could find was the REG file that was included on that link's site. If you want to trust this, just copy the text between the ======== and save as a .REG file, then execute the file. I am taking no responsibility for this file or what it may (or may not) do to your computer. It is simply the REG file I got from that site. It's up to you whether you use it or not.
It's been so long now since I used Jochen's method that I can't remember for sure, but I believe I also tracked down the "AcrobatInfo.exe" file and deleted it (probably while in safe mode).
===========================================
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18 \Components\21C0FC0AB3C24344FB30C34266AA5E09]
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{98D9A6F1-4696-4B5E-A2E8-36B3F9C1E12C}]
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\AcrobatInfo.exe]
REGEDIT4
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Low Rights\ElevationPolicy\{AC76BA86-1033-0000-7760-000000000002}]
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\AcroExch.Document]
"BrowseInPlace"=-
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\AcroExch.Document.7]
"BrowseInPlace"=-
============================================
Good luck.

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Font Capture application error

Similar Messages

Maybe you are looking for