Font changes in the last line of paragraph when printing

InDesign CS3 (5.0.2), Dell P4, 3Ghz, 1gb ram
This is a one page document with about half a page of text and some graphics. When printing to HP Laserjet, everything prints fine. When printing to Lanier 2138 color laser, everything prints fine EXCEPT for the last line of the second paragraph.
The text changes to an unrecognizable font. (The rest of the document uses Trebuchet.) It does happen on the line after a hyphenated word, but we've put the entire word on the last line (eliminating the hyphen) and get the same results.
As I mentioned, the entire page prints perfectly to the HP black and white laserjet. It also prints perfectly to the Lanier 2138 *IF* we create a PDF first and THEN send it to the 2138.
I've checked the knowledgebase and searched this forum, but haven't seen anything related to this issue. Any help or ideas is greatly appreciated.
Thanks in advance for your time.
Todd

Todd,
That field is the font style field, not a "Paragraph" field. It just happens to be next to the button that changes the control panel to paragraph mode.
Is the file you posted the same one you made the jpeg from, or the one where you changed that field to "regular"? I'm thinking the latter, because the paragraph shows regular when I highlight it. Also, I don't think the font in the jpeg has changed, just it is printing gibberish on that last line.
Try this: File > Export and for type choose Interchange format (.inx). Open that file in InDesign and save again as an InDesign document. See if that prints.
If not, I'd say it's almost certainly the driver.
Peter

Similar Messages

  • How can i remove gaps between letters, usually occur in a paragraph justified with the last line aligned right/left

    here's an example of a paragraph i've taken from wikipedia:
    if you can see, in the paragraph aligned with the button "Justify with the last line aligned left" - the one above, i've marked with red lines the places in which a gap occurs all of a sudden, and i cannot undo them.
    for the same paragraph below i used the simple "Align left" button.
    can anyone please help me understand what has happened that made those gaps occur.
    i use Adobe Design Standard CS 6 Middle East Version. this bug occurs in other font/languages as well.

    Thank you for providing the sample IDML file.
    I still think it could be the used paragraph composer, maybe in conjunction with the used font. I'd change the composer to see, if the problem will go away.
    @Willi – you are right, the story direction is RTL, but the paragraph direction is LTR. That's no surprise here since the ME version of InDesign was used.
    I would change story direction to LTR, use the "normal" paragraph composer instead the global one.
    Since the used font is not available to me, a substituted font is not showing the problem.
    But that may mean nothing. I do not use the ME version of InDesign…
    Uwe

  • How do I prevent Pages from pushing paragraphs to next page when they would otherwise begin on the last line of the previous page?

    I am writing papers for school which have strict page limits so I can't afford to be losing lines at the bottom of a page because Pages thinks it looks better to have a new paragraph start on the next page. It does this automatically and I have to go back and manually format to get the first line of the paragraph to start on the last line of the previous page. This then creates problems down the line when I am editing so I would really like to be able to turn the feature off.
    e.g. with Pages auto-formatting
    -----page 1-----
         Paragraph #1 blah blah
    blah blah blah
         Paragraph #2 blah blah
    blah blah blah
    -----page 2-----
         Paragraph #3 blah blah
    blah blah
    e.g. after manual formatting
    -----page 1-----
         Paragraph #1 blah blah
    blah blah blah
         Paragraph #2 blah blah
    blah blah blah
         Paragraph #3 blah blah
    -----page 2-----
    blah blah

    Change the keep with next rules in:
    Inspector > Text > More > Pagination & Break
    Peter

  • How to upload CSV file w/o ,, for the last line

    Hi Experts,
    As part of one interface uploading the csv file (4coulmns) manually using the TCODE: CSCA_FILE_COPY.
    After uploading when i see in the AL11 as it is csv file it is filling the , in each space.
    But my issue while running the interface (because of logic in it) checking for the hash total in the last line where (record count, hash total) only 2 items should come but because of manual upload adding the (record count, hash total, , ,) another two spaces.
    Where program not moving further becasue the it is alway comparing the amounts (1000.00 not matching with 1000.00, , ) it is not processing. In production files directly load in to unix server so no issues and i can't ask to change the program code...because iam not following the process. As part of testing i've to do manually only.
    Please suggest the workaround for this.
    Is it possible to change the contents directly in AL11 directly....then HOW ?
    or
    How to create a csv file w/o , , in the last line (may be it is not possible) ?
    Thanks for your replies in advance.
    Regards
    VVR

    I don't think you can edit from AL11, nor creating a CSV without those commas at the end because are created to state fields with empty value.
    You have 6 columns filled with values but for the last line you only fill the first four. It is expected to appear , , for the last 2 columns on the last line.
    I can only suggest keep doing it manually before uploading the CSV file... or... you are saying you can't change the program.
    How about upload all CSV files... then writing another program to get those files from AL11 and delete the spare commas at the end line?
    Cheers,
    Andres.

  • Only the last line item is shown in main window...

    Hello Experts,
    I created a custom form for the standard checque program RFFOUS_C. Now, in my MAIN window, I
    called a subroutine in a custom program which loops through the line items but the problem is
    only the last line item is being shown. I tried using CONTROL_FORM to create a new line
    but it does not work. Note that I did not customize RFFOUS_C since it is being used by
    multiple companies. Below is my code:
    SAPSCRIPT:
    510-C
    Begin of insertion DEVK940799 11/10/2008 DEL_HIDALGO
    DEFINE &LTYC_XBLNR& = ''
    DEFINE &LTYC_BLDAT& = ''
    DEFINE &LTYC_SGTXT& = ''
    DEFINE &LTYC_DMBTR& = ''
    PERFORM WRITE_LINE_ITEMS IN PROGRAM Z9999RFI_Z2574FFI_RA
    USING &REGUH-LAUFD&
    USING &REGUH-LAUFI&
    USING &REGUH-XVORL&
    USING &REGUH-ZBUKR&
    USING &REGUH-LIFNR&
    USING &REGUH-VBLNR&
    CHANGING &LTYC_XBLNR&
    CHANGING &LTYC_BLDAT&
    CHANGING &LTYC_SGTXT&
    CHANGING &LTYC_DMBTR&
    ENDPERFORM
    PROTECT
         &LTYC_XBLNR&     &LTYC_BLDAT&     &LTYC_SGTXT&     &LTYC_DMBTR&
    ENDPROTECT
    End of insertion DEVK940799 11/10/2008 DEL_HIDALGO
    PROGRAM:
    IF gt_regup[] IS NOT INITIAL.
        CALL FUNCTION 'OPEN_FORM'
           EXPORTING
    *         APPLICATION                       = 'TX'
    *         ARCHIVE_INDEX                     =
    *         ARCHIVE_PARAMS                    =
    *         DEVICE                            = 'PRINTER'
    *         DIALOG                            = 'X'
             form                              = lcc_z2574ffi_ra
    *         LANGUAGE                          = SY-LANGU
    *         OPTIONS                           =
    *         MAIL_SENDER                       =
    *         MAIL_RECIPIENT                    =
    *         MAIL_APPL_OBJECT                  =
    *         RAW_DATA_INTERFACE                = '*'
    *         SPONUMIV                          =
    *       IMPORTING
    *         LANGUAGE                          =
    *         NEW_ARCHIVE_PARAMS                =
    *         RESULT                            =
           EXCEPTIONS
             canceled                          = 1
             device                            = 2
             form                              = 3
             OPTIONS                           = 4
             unclosed                          = 5
             mail_options                      = 6
             archive_error                     = 7
             invalid_fax_number                = 8
             more_params_needed_in_batch       = 9
             spool_error                       = 10
             codepage                          = 11
             OTHERS                            = 12.
        IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        LOOP AT gt_regup INTO lw_regup.
          m_line_items 'LTYC_XBLNR' lw_regup-xblnr.
          m_line_items 'LTYC_BLDAT' lw_regup-bldat.
          m_line_items 'LTYC_SGTXT' lw_regup-sgtxt.
          m_line_items 'LTYC_DMBTR' lw_regup-dmbtr.
          DELETE ex_output WHERE value IS INITIAL.
          CALL FUNCTION 'WRITE_FORM'
           EXPORTING
             element                        = '510-C'
             function                       = 'APPEND'
    *         TYPE                           = 'BODY'
             window                         = 'MAIN'
    *       IMPORTING
    *         PENDING_LINES                  =
           EXCEPTIONS
             element                        = 1
             function                       = 2
             type                           = 3
             unopened                       = 4
             unstarted                      = 5
             window                         = 6
             bad_pageformat_for_print       = 7
             spool_error                    = 8
             codepage                       = 9
             OTHERS                         = 10.
          IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
          CALL FUNCTION 'CONTROL_FORM'
            EXPORTING
              command   = 'NEW-LINE'
            EXCEPTIONS
              unopened  = 1
              unstarted = 2
              OTHERS    = 3.
          IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
        ENDLOOP.
        CALL FUNCTION 'CLOSE_FORM'
    *       IMPORTING
    *         RESULT                         =
    *         RDI_RESULT                     =
    *       TABLES
    *         OTFDATA                        =
           EXCEPTIONS
             unopened                       = 1
             bad_pageformat_for_print       = 2
             send_error                     = 3
             spool_error                    = 4
             codepage                       = 5
             OTHERS                         = 6.
        IF sy-subrc <> 0.
    *        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.

    Hi,
    Write the at last event in the program and check if it works
      At last.
           CALL FUNCTION 'CONTROL_FORM'
            EXPORTING
              command   = 'NEW-LINE'
            EXCEPTIONS
              unopened  = 1
              unstarted = 2
              OTHERS    = 3.
          IF sy-subrc  0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
    Regards,
    Sravanthi

  • JSP for Vcard cannot strip carriage return in the last line of the file.

    I am using JSP to output a Vcard (http://en.wikipedia.org/wiki/VCard)
    The following code works great in Windows but fails on the mac:
    <%@ page contentType="text/x-vcard" %><%--
    --%><%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %><%--
    --%><%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %><%--
    --%>BEGIN:VCARD
    VERSION:2.1
    <c:choose><%--
    --%><c:when test="${not ((empty param.lan) and (empty param.fin)) }"><%--
    --%>N:${param.lan};${param.fin}
    FN:${param.fin} ${param.lan}
    </c:when><%--
    --%><c:otherwise><%--
    --%>FN:${param.org}
    </c:otherwise><%--
    --%></c:choose><%--
    --%>ORG:${param.org}
    TITLE:${param.title}
    TEL;WORK;VOICE:${param.phwork}
    ADR;WORK:;;${param.st};${param.city};${param.state};${param.zip};
    EMAIL;PREF;INTERNET:${param.email}
    REV:20080424T195243Z
    <c:out value="${fn:replace('END:VCARD','\\\r','')}" escapeXml="false"/>After some tests, I discovered that Mac (I used Tiger, latest update, not Leopard) needs extra white space and carriage returns stripped off. Once this is achieved, the vcard will automatically import into Address Book. I have followed other forums which advice on using JSP comments as in the code above. But for some strange reason the last line of the JSP outputs an extra carraige return. How do I get rid of the carriage return at the end of the file? the replace function from JSTL is not working.
    Edited by: shogo2040 on Dec 18, 2008 7:11 PM : I added more detail to the Subject

    I originally had that END:VCARD without any carriage return.
    But I still get an extra carriage return at the end when the JSP renders to VCF
    I'm using Tomcat running on Linux.
    I found this, article which implies (but does not explicitly say) JSP in general adds a newline to the last line:
    http://www.caucho.com/resin-3.0/jsp/faq.xtp (But its not tomcat either, so maybe this info is irrelevant).
    Edited by: shogo2040 on Dec 22, 2008 3:31 PM - changed rendered to VCF from rendered to JSP

  • My Deskjet 1056 cuts the last line off of the page

    My Deskjet 1056 cuts half the last line of every page off. No matter what I'm printing from where. I've tried changing margins and printing areas and borders. I've heard to try changing the drivers to 990c or 450 . neither make a difference. Changing the port from bidirectional makes it worse. Even tried to change the print processor modes. No luck. Does anyone have any suggestions. When I print and alignment page the squares at the bottom print just fine and align the page just fine so that doesn't help either. I run on Windows7 I don't know if that has anything to do with it. PLEASE HELP. Thanks in advance

    Hi ! Welcome to the HP Forums. I understand you are having an issue with printouts being cut off at the bottom when printing to your HP Deskjet 1056 All-in-One printer from your Windows 7 computer. I'd love to help you with this. The first thing I would suggest would be to make a copy on the printer itself. If the bottom of the page is cut off, then it could be an issue with the hardware. If the copy comes out fine, then we know the hardware is functioning properly. If the copy comes out fine, I would suggest installing the full feature software for you printer if you haven't already. You can download the software here: HP Deskjet Full Feature Software and Drivers If that doesn't resolve the issue please download and run the HP Print and Scan Doctor and let me know of any errors or messages you receive. Have you tried printing multiple documents? Or printing from alternate programs to see if it might be an issue with a specific document or program? I look forward to hearing back from you and working towards a resolution. Thanks for posting!

  • How to keep unaltered the last line?

    Hi I am doing some last corrections in a book which is going to be in the next days published and I am not allowed to change the form of the pages. (The indexes at the end of book are already done). Thus by correcting some footnotes (making them shorter) the main text above also changes (the first line of the next page appears in the page I corrected the footnotes) and I cannot keep the previous form of the pages. How can I keep the last line of the main text unaltered so that the pages turn exactly at the same point like before?

    If I am understanding your issue correctly, it seems that you are trying to keep the length of each page's main content  unaltered so that the index could refer back to the correct page.  It sounds like the content in each page's frames are linked, so that they flow continuously.  Adding a page break (or a frame break) may be what you're looking for.  You'll find it under Type > Insert Break Character.
    I hope this helps.  And good luck with your book!

  • How to find out the Last line of a page in Smart forms

    Hi Experts,
    I need to find out the <b>last line of a page in smartforms</b>.
    I have <b>Heading in a text element</b> and its <b>text in another text element</b>.
    If the heading falls in the last line, its contents will be displayed in the next page. I want to print the heading  in the next page.
    Please advise on this issue.
    Thanks in advance,
    Viven

    You can put both the heading and contents in a Folder node and check the page protection checkbox of the Folder node.  This way both will be displayed on the same page always.

  • Just setting up iCloud on my iMac, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number stil

    Just setting up iCloud on my iMac 10.9.2, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number still shows as number that the verification code is being sent, I prompt "Don't have access to this phone" and that's no help at all.  The only way I can sign out /off from iCloud is to uncheck everything that I wanted to keep in the cloud????
    Thanks in advance for any help.

    Skip the iCloud sign in for now.
    Once you reach the home page, go to settings and sign out of FaceTime and Messages.  This should also sign you out of iCloud.
    Go to iCloud in settings and sign in with the correct Apple ID.
    If that does not work
    Skip the iCloud sign in
    Go to Apple ID.apple.com and sign in
    Change your Apple ID to the old one
    Delete iCloud account on your device with the old Apple ID and the same password.
    Go back to the website, change your Apple ID back to the current one. You will receive an email to verify the account. Verify first.
    Sign into iCloud on your device with the correct Apple ID and password

  • Final total cannot appear when the last line item reached the page end

    Hi All,
    My report included 2 pages. Problem is the final total cannot appear when the last line item reached the page end. (page 2)
    final total will appear on the middle of last page (page 3) when i comment (type    = 'BOTTOM').
    Below is the program.
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          device   = 'PRINTER'
          dialog   = 'X'
          form     = 'ZBOTM_VOUCHER'
          language = sy-langu.
      sort itab by vblnr.
      LOOP AT itab INTO wa_itab.
        move wa_itab-vblnr to reguh-vblnr.
        move wa_itab-lifnr to reguh-lifnr.
        move wa_itab-rbetr to reguh-rbetr.
        reguh-rbetr = reguh-rbetr * -1.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            window  = 'MAIN'
            element = 'DETAIL'.
        t_rbetr = reguh-rbetr + t_rbetr.
        AT LAST.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              window = 'LINE'.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              element = 'TOTAL'.
              type    = 'BOTTOM'
              WINDOW  = 'MAIN'.
        ENDAT.
    Thanks.

    Hi,
    Where should I include the code for bottom?
    How to open text editor?
    Thanks.
    Edited by: Alice8 on Feb 7, 2011 9:09 AM

  • How to read the last line in a text file using text_io?? please help

    Dear all
    I made a procedure that append text into a text file on the operating system.
    the text file grows rapidly. It contains now about 200,000 line . I need to read the last line only . In other wprds i need to go direct to the last line to read some values. Is it possible??
    Please help

    Hello,
    If you know the number of the line you want to read, I can sugget you to use the MORE dos command or the TAIL unix command that redirect to a temporary text file
    Example to create a file that contains the 200010th last lines :
    (Client)Host( 'MORE the_file_name.txt +200010 > small_file.txt') ;So you have only to read the small file with the TEXT_IO functions.
    Francois

  • How to read the last line in a txt file?

    Dear all,
    I want to read the last line in a txt file. There are thousands of lines in this file. What I want is to move the file pointer directly to the last line of the file. But I did not know how do to it. Can anybody help me out?
    Thank you very much!

    If the file is coded as ASCII or one of the encodings that maps a single byte to a char then the following class will assist you
    import java.io.*;
    import java.util.*;
    public class GetLinesFromEndOfFile
        static public class BackwardsFileInputStream extends InputStream
            public BackwardsFileInputStream(File file) throws IOException
                assert (file != null) && file.exists() && file.isFile() && file.canRead();
                raf = new RandomAccessFile(file, "r");
                currentPositionInFile = raf.length();
                currentPositionInBuffer = 0;
            public int read() throws IOException
                if (currentPositionInFile <= 0)
                    return -1;
                if (--currentPositionInBuffer < 0)
                    currentPositionInBuffer = buffer.length;
                    long startOfBlock = currentPositionInFile - buffer.length;
                    if (startOfBlock < 0)
                        currentPositionInBuffer = buffer.length + (int)startOfBlock;
                        startOfBlock = 0;
                    raf.seek(startOfBlock);
                    raf.readFully(buffer, 0, currentPositionInBuffer);
                    return read();
                currentPositionInFile--;
                return buffer[currentPositionInBuffer];
            public void close() throws IOException
                raf.close();
            private final byte[] buffer = new byte[4096];
            private final RandomAccessFile raf;
            private long currentPositionInFile;
            private int currentPositionInBuffer;
        public static List<String> head(File file, int numberOfLinesToRead) throws IOException
            return head(file, "ISO-8859-1" , numberOfLinesToRead);
        public static List<String> head(File file, String encoding, int numberOfLinesToRead) throws IOException
            assert (file != null) && file.exists() && file.isFile() && file.canRead();
            assert numberOfLinesToRead > 0;
            assert encoding != null;
            LinkedList<String> lines = new LinkedList<String>();
            BufferedReader reader= new BufferedReader(new InputStreamReader(new FileInputStream(file), encoding));
            for (String line = null; (numberOfLinesToRead-- > 0) && (line = reader.readLine()) != null;)
                lines.addLast(line);
            reader.close();
            return lines;
        public static List<String> tail(File file, int numberOfLinesToRead) throws IOException
            return tail(file, "ISO-8859-1" , numberOfLinesToRead);
        public static List<String> tail(File file, String encoding, int numberOfLinesToRead) throws IOException
            assert (file != null) && file.exists() && file.isFile() && file.canRead();
            assert numberOfLinesToRead > 0;
            assert (encoding != null) && encoding.matches("(?i)(iso-8859|ascii|us-ascii).*");
            LinkedList<String> lines = new LinkedList<String>();
            BufferedReader reader= new BufferedReader(new InputStreamReader(new BackwardsFileInputStream(file), encoding));
            for (String line = null; (numberOfLinesToRead-- > 0) && (line = reader.readLine()) != null;)
                // Reverse the order of the characters in the string
                char[] chars = line.toCharArray();
                for (int j = 0, k = chars.length - 1; j < k ; j++, k--)
                    char temp = chars[j];
                    chars[j] = chars[k];
                    chars[k]= temp;
                lines.addFirst(new String(chars));
            reader.close();
            return lines;
        public static void main(String[] args)
            try
                File file = new File("/usr/share/dict/words");
                int n = 10;
                    System.out.println("Head of " + file);
                    int index = 0;
                    for (String line : head(file, n))
                        System.out.println(++index + "\t[" + line + "]");
                    System.out.println("Tail of " + file);
                    int index = 0;
                    for (String line : tail(file, "us-ascii", n))
                        System.out.println(++index + "\t[" + line + "]");
            catch (Exception e)
                e.printStackTrace();
    }Note, the EOL characters are treated as line separators so you will probably need to read the last two lines (think about it for a bit).

  • How can I search the last line in an internal table?

    How can I search the last line in an internal table?
    With a describe?? If it is , how can I do that?
    Thanks!!

    Hi shilpa,
    it seems to be you are NEW to SDN. welcome. if you want to get solutions to your Questions, you have to post a NEW thread.dont use the existing thread to post your question.
    any way i am giving you the solution for your question
    LOOP AT ITAB WHERE F1 = <SOME VALUE>
                       F2 = <SOME VALUE>.
    ENDLOOP.
    IF SY-SUBRC = 0.
      ITAB WILL HAVE THE LAST RECORD which satisfying the given criteria in WHERE clause of LOOP.
      write itab <--this ITAB will have the last record.
    ENDIF.
    regards,
    Srikanth.
    Message was edited by: Srikanth Kidambi

  • How to only read the last line in the text file by using BufferedReader ?

    Dear all,
    Hello, I am new to Java. Do anybody know how to read the last line (this is the last record) in the text file.The method I am now using is reading from the first line until I reach the last line in the text file. Thank you!!
    BufferedReader br = new BufferedReader(new FileReader("c:\\sdk1.4.1\\bin\\dbExport.txt"));
    DataInputStream in = new DataInputStream(new FileInputStream("c:\\sdk1.4.1\\bin\\dbExport.txt"));
    String input;
    String firstinput;
    String secondinput;
    int count=90;
    int year=1955;
    while ((input = br.readLine()) != null) {
    firstinput = input.substring(0, 10);
    secondinput = input.substring(10);
    String insertStore1 = ("INSERT INTO AUTHORS " +
    "VALUES ('" + count + "', '" + firstinput + "', '" + secondinput + "', 1955)");
    System.out.println(insertStore1);
    int result = stmt.executeUpdate(insertStore1);

    I suppose you could use a java.io.RandomAccessFile.

Maybe you are looking for