Font(Chinese) issue when script form archive to PDF

Dear expert,
the issue is I have scriptform which font is CNSONG, preview and print both fine, but when it archive to PDF, the font is not display properly, eg. title font is not blod anymore.
can some one give smoe advices ?
thanks in advance!

HI,
Can you check this thread.
https://scn.sap.com/thread/1479512
Regards,
Madhu.

Similar Messages

Smartform font spacing Issue when using SAP printer name

Hi Friends,
I am facing some spacing issues when printing a form using SAP printer name. If I use LOCL then the output comes perfectly but when I use the SAP printer name the space between characters are getting widened and so the alignment of each column goes wayward. I suspect it could be due to the device type but not sure which seeting controls this. There is a similar problem in the logo as well. When using LOCL the logo comes out good but when using the printer name the quality is not good and becomes pixelised. Have any of you faced similar issues? Can you provide some guidance or pointers for the solution.
Device type of LOCL : ZSAPWIN
Device type of SAP printer name : ZHPLJ5
CPI is defined in smartform as 10.
Please let me know if you need more information.
Thanks,
Praveen

Hi,
This problem occurs because the printer driver for both the printers are different,
I suggest you use Local printer only or configure any other printer with printer diver in SAP as SAPWIN.
Regards,
Bharat.

Font substitution issues when creating PDF from PS file in Distiller

I am not sure if this post should go under Distiller Server, but it dont know if there is a difference between Distiller X and Distiller Server.
Context: I am trying to convert postscript files on my PC that originate from a unique Mac built program and unfortunately receive the following error message:
%%[ Warning: Helvetica not found, using Font Substitution. Font cannot be embedded. ]%%
%%[ Warning: Helvetica-Bold not found, using Font Substitution. Font cannot be embedded. ]%%
%%[ Warning: Helvetica-BoldOblique not found, using Font Substitution. Font cannot be embedded. ]%%
When I try and convert the postscript font to a pdf in Acrobat Distiller X the font substitutes to Arial. I have a few versions of Helvetica on my PC but Distiller doesn’t recognise them.
My question is: how can I tell Distiller, as a default, to substitute to the Helvetica loaded on my PC rather than Arial so that I eliminate the error message and get an accurate pdf.
Any help would be greatly appreciated.
Thanks.

You can set the folders in distiller by going to Settings. See these two pictures (click on them)
hope this helps.

Issues when flattening forms

When I flatten a PDF form on a tablet, the form fields, (in particular check boxes), move on the form and become superimposed on each other. Is there a way to preview a form before flattening and edit the check boxes to prevent them from shifting? I'm currently using Acrobat XI Professional to create and edit forms.

Since that's not an Adobe product, you should probably ask your question on
the forums related to that product.

Font/Formatting issues with Reports/Forms

Hello,
Can you please allow us to specify the formatting attributes in Portal Reports and Forms ? In Portal reports, for e.g, it would be great if we had one set of formatting for the report header and another for the report data. Same way, for forms, we would like to format the labels in forms and different formatting for the rest of the form.

One thing you might do is this. Don't display the Title View in your reports. You can do this either by deleting the views from the Compound Layout or, within Edit Dashboard, by selecting only the view that contains the report. (Obviously, if your report has several view, you would need to choose the first route.)
Instead of the Title View, do this: In the Dashboard section which contains both reports, click on the "Rename" button. Type the name of that best illustrates both reports, check the "Display Section Heading" checkbox and click "OK."
Next, click the "Rename" button again and this time go in to the formatting section to format as required. (Note: After you check the checkbox, if you don't click "OK" right after, the check mark won't stick. So click "OK" and then go back in to do any formatting you wish.)
This method allows the user to collapse the section and still see what the section is about. This is good practice when you have several reports in one dashboard page. Even collapsing all the sections, you can see what is "inside" and expand the appropriate section.
HTH,

Font issues when saving file as a PDF

How can I update my fonts so that I can save the document as a PDF? I get an error message and a separate popup window stating 'The "HelveticaNeueLTStd-BdIt" Font is not available.' I have some cross-referencing issues going on. Can anyone help resolves these?
Thanks

When generating a PDF, what do your PDF settings look like? If you have the "Rely on system fonts only" option selected (see screenshot), you probably do not have the font in question (HelveticaNeueLTStd-Bdlt) installed on your system.
If you are not relying on system fonts (this option is unchecked, which I don't believe is good practice), the font might not be available in FM. I don't know what version of FM you're running, but in FM10, you could try opening your file, and go to View > Pods > Fonts to display all fonts that are currently being used in your document and all instances of each font. Usually all missing fonts are replaced with "Times New Roman", so you can use the font pod to replace those instances with the correct font (if available in FM. Check Format > Font to see what fonts are available).
I would definitely double-check that the font you need is actually installed on your system. I ran into the same problem, and that was my issue.
For the cross-references, you need to provide better information. What is the issue? Are the xrefs not displaying correctly? Are the links going to the wrong place? etc.
HTH,
Smitty

Is any one else having scrolling issues when a tab has a pdf open but isn't the current tab?

I have a PDF open in a tab. When I go to a different tab and try to scroll (using the mouse scrolling feature, not clicking the scroll bar) the mouse icon says it is scrolling, but it isn't. I then go to the tab with the pdf and realize that the scrolling occurred on that tab and not the active tab.

Thank you for reporting this.
I would consider this a bug in InDesign CC v9.x and v10.x and would report it:
Adobe - Feature Request/Bug Report Form
(Cannot test it right now.)
Uwe

CR XI R2 pdf export font size issue

Exporting a report to PDF using Crystal XI R2 seems to be reducing the size of the fonts. When printing directly from CR and exporting to PDF and printing from the PDF viewer the font sizes are smaller. Any ideas on what I can do to correct the problem?

Please refer following SAP note:
Business Objects Notes Get Help | Close
   1220516 - Font size decreases when report is exported to PDF from Crystal Reports XI or Crystal Reports XI Release 2
Language   English     Version   1     Validity: 07.05.2008 - active
Edit Print View Show change log Show Internal Memos
Content:    Summary   |   Header Data   |   Other Properties
Symptom
In Crystal Reports XI and Crystal Reports XI Release 2 the font shrinks by approximately 10% when a report is exported to Adobe Acrobat Format (PDF).
Cause
This behavior is due to the way Windows and UNIX, and therefore Crystal Reports, handles low point size fonts on a low-resolution screen. Text layout in the absence of a printer driver will consistently be rendered differently than in PDF.
Crystal Reports currently shrinks the font by 10% to prevent any truncation this difference may cause.
Resolution
CAUTION The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
To resolve the behavior
Set the resolution of the default printer of the local computer experiencing the issue to 1200 DPI. Most printers have a default setting of 600 DPI.
Create two registry keys to prevent the crxf_pdf.dll from decreasing in font size.
Click Start > Run. Type "regedit". The Registry Editor appears.
Create the following keys for Crystal Reports XI with the defined values:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.0\Crystal Reports\Export\PDF\ForceLargerFonts
Type: DWORD
Recognized Values: 0,1
Default Value: 1
Creation Method: manual
HKEY_LOCAL_MACHINE\Software\Business Objects\Suite 11.0\Crystal Reports\Export\PDF\ForceLargerFonts
Type: DWORD
Recognized Values: 0,1
Default Value: 1
Creation Method: manual
Set both registry key values to 1 to turn them on.
Create the following keys for Crystal Reports XI Release 2 with the defined values:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Export\PDF\ForceLargerFonts
Type: DWORD
Recognized Values: 0,1
Default Value: 1
Creation Method: manual
HKEY_LOCAL_MACHINE\Software\Business Objects\Suite 11.5\Crystal eports\Export\PDF\ForceLargerFonts
Type: DWORD
Recognized Values: 0,1
Default Value: 1
Creation Method: manual
Set both registry key values to 1 to turn them on.
In UNIX, an X server client such as x-win32 must be installed. Add the keys as follows:
Launch the X server client.
Source <bobje install>/bobje/setup using env.sh (for example: ./env.sh).
Create the registry keys as detailed above.
Restart the Report Page and Cache Servers.
====================
NOTES:
If using Windows 2003 Server, upgrade to Acrobat Reader version 8.0 or higher as well as creating the above registry keys.
Use the appropriate path to access the UNIX regedit as follows:
AIX: <bobje install>/bobje/enterprise115/aix_rs6000/crpe/mw/bin-aix4_optimized/regedit
Sun Solaris: <bobje install>/bobje/enterprise115/solaris_sparc/crpe/mw/bin-sunos5_optimized/regedit
Linux: <bobje install>/bobje/enterprise115/solaris_sparc/crpe/mw/bin-linux_optimized/regedit
====================
Edited by: Prathamesh Acharya on Apr 23, 2009 5:50 PM

File formatting issues when saving PDF as PPTX in Acrobat XI Pro

Hi guys,
I have some issues when I'm saving my PDF (initially comming from InDesign) as PPTX. The format is suddenly changing, leaving a blank zone, and some of the pages are rotated.
Is it a problem comming from the Indesign or from the Acrobat options itself? I have already tried changing the chekboxes in the option box when I'm saving, but nothing worked.
If someone has an idea how to fix that, i would be very grateful! Thanks in advance

Which dot version of Acrobat XI are you currently using in your export? Is the PDF file tagged? If not, then you may want to tag the PDF file before exporting it.

Performance Issues when editing large PDFs

We are using Adobe 9 and X Professional and are experiencing performance issues when attempting to edit large PDF files. (Windows 7 OS). When editing PDFs that are 200+ pages, we are seeing pregnated pauses (that feel like lockups), slow open times and slow to print issues.
Are there any tips or tricks with regard to working with these large documents that would improve performance?

You said "edit." If you are talking about actual editing, that should be done in the original and a new PDF created. Acrobat is not a very good editing tool and should only be used for minor, critical edits.
If you are talking about simply using the PDF, a lot depends on the structure of the PDF. If it is full of graphics, it will be slow. You can improve this performance by using the PDF Optimize to reduce graphic resolution and such. You may very likely have a bloated PDF that is causing the problem and optimizing the structure should help.
Be sure to work on a copy.

Coverting fonts to paths when document is in pdf format

Is there a way to convert fonts to paths when the document is in pdf format. Does Adobe Acrobat pro have such tool?

In Acrobat Pro the "Flattener Preview" tool - under Print Production - has an option to convert all text to outlines.

How to fill data when call function of sap standard script form?

Hi every experts,
<Priority Normalized>
In our system, when we log in 'FR', we can print purchase order in language Franch,in t_code:ME22N. And when logging in 'EN', we can print it in language English, in ME22N. The English form is just only translated from Franch, with all same structure and frame. The form is done by script form.
And when logging in 'ZH', we create a new program, calling function smartform, instead of translating from EN language. Because of different structure and frame, I don't know the way to write script, so I print puchase order by smartform, when logging in 'ZH'.
But I have a new issue. Our MM module consultant needs me to print Chinese form if one condition, print English form in other condition.
So I have no idea to solve it. Because in my program, I get data to fill smartform and call function of smartform. And I don't know how to get data to fill script form. I only know the function name, 'OPEN_FORM' 'WRITE_FORM' 'CLOSE_FORM'.....
If I only call the several functions, I will get only frame without no data. So who can tell me how to do????
<Urgency downgraded>
Edited by: Suhas Saha on Jul 26, 2011 3:34 PM
Edited by: Vinod Kumar on Jul 26, 2011 4:09 PM

Hi,
Normally if we look in NACE transaction, you can see that upto five different FORMS can be assigned to a single output type . i.e. for each form there will be a seperate routine through which it gets called. But it all start from the first form only.
so you need to write your code in the ENTRY of the first form and if it does not satisfy do not go for processing of it but just exit of that form ENTRY. so that it will take you to next form.
hope this helps.
Thanks,
Venkatesh

After installing Reader 11.0.07 update on my Mac OS X 10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before and I am concerned that my computer is being hacked into

After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus. Is this normal or do I have to uninstall this update?

After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus. Is this normal or do I have to uninstall this update?

Label printing issue with chinese characters (SAP script)

Hi ,
I have a requirement to print chinese characters on label print out.
Here are the steps already tried:
1) Created a new device type which is copy if ASCIIPRI and character set 8400
2) Font ANDALE_S, CNHEI, CNSONG are assigned to device type, same fonts called in SAP script.
3) During the print, it is picking ANDALE_S font(observed in spool RAW data), but preview is good.
4) I put ZPL codes CW1,B:MSUNG.FNTFS in beginning of script and also ^A@N,50,50,B:MSUNG.FNT while prining actual chinese text in SAP script.
5) also tried other device types assigned to printer LZEBU2, LB_ZEB2 etc.,
6) already checked at printer DIMM level, SIMSUN, ANDALE_S fonts are already installed
7) Character set on printer is same as in SAP
So far no option worked, it default to Courier fonts while printing and it results garbage characters.
If anyone has ideas, please advice.
thank you,
Anil

Hi,,
If the ZPL commands are correct for switching to the printer's internal CHinese font and character set, it may work to add the fonts via SE73 -> Printer Fonts -> ASCIIPRI . In here you need to add the commands in the print control SFxxx for your created font.
Another possibility is to print via windows and device type CNSAPWIN. Here it should not be necessary to add any font.
Regards,
Aidan

Why font of menu is very small when deploy form to form server?

The font of menu is small When I used browser to run form in form server.
The size of font is correct when I browsed from windows 2000 But it is uncorrect when I browsed from windows 98 thai edition.
How can I adjust the size of font?

Try playing with the font settings in the /form60/java/oracle/forms/registry/Registry.dat
This will control what default fonts are used.

Font(Chinese) issue when script form archive to PDF

Similar Messages

Maybe you are looking for