Font color problems in one forum

I'm in a classical music forum--for at least 3 years I could post and reply to messages with my blackberry with a minimum of difficulty. However in the last month when I go to post my reply before I reach the submit option on the screen the font color boxes the forum offers now appear and there are many color choices. It takes a long time to scroll down to where I have to be to hit submit? Is there any option on the blackberry to avoid having to do this? Can I eliminate having to see these big colored boxes every time I post or reply? Any help would be appreciated. Regards, Len

I have found a serious problem in my 17inch imac, the colors in the upper side of the screen looks darker that the bottom, if you make a rectangle in a dark red color in illustrator or photoshop it looks like a gradient, the color is not solid, My imac is just 2moths old, what can i do, I send it to my local apple service provider ( guadalajara mexico), and they change the display for a new one, and te failures is still there, they want now to change the logical board....wath can a I do if they do not can fix it?... excuse my inglish by the way

Similar Messages

Font color problem upgrading from 1.3.1 to 1.4.2_02

I have noticed when we upgraded from 1.3.1 to 1.4.2_02 that JLabel font color is now black - it used to be blue. Does anyone know how to make the font color of JLabels revert back to the original blue without specifically calling setForeground() on each label?

Sun has changed in the class MetalTheme the method
JDK 1.3.1: public ColorUIResource getSystemTextColor() { return getPrimary1(); } into
JDK 1.4.2: public ColorUIResource getSystemTextColor() { return getBlack(); }
Just insert the following lines at the beginning of your main-method:
MetalLookAndFeel.setCurrentTheme( new DefaultMetalTheme()
{ public ColorUIResource getSystemTextColor() { return getPrimary1(); }
try{ UIManager.setLookAndFeel( "Metal" ); }
catch( Exception e ){ e.printStackTrace(); }
Now you have the old colors

Type(font) color problem?

every time i type sometnig new font color changes to black
before i start typing i chose some color for example red and when select type tool(t) and click where i want to type color chage to black?
why?

always state what version you are using changing the current fill and/or using maintain appearance does not apply to the character color text it defaults to black because that is the color of the default character style either use your colored text to redefine the default character style or create a new character style based on the type settings you want
See how annoying it is to have to read "clever and chik" web-speak?
JET

Font Color problem with JEditorPane

am designing an application whch will change the forecolor the keywords as the user type. like many java ide. but i am not able to do this.
this is what i am doing. start and end refers to the start and end position of the keyword.
if its a keyword i have to make it red.
if not make it black.
How to do this...
if(isKeyWord(editor.getText(start,end-start))) {
          System.out.println("found : " + start + ":" + end);
          editor.setSelectionStart(start);
          editor.setSelectionEnd(end);
          editor.setSelectedTextColor(Color.RED);
     }else {
          System.out.println("not found : " + start + ":" + end);
          editor.setSelectionStart(start);
          editor.setSelectionEnd(end);
          editor.setSelectedTextColor(Color.RED);
so please help me...
thank u

Asked and answered two days ago in this posting:
http://forum.java.sun.com/thread.jspa?threadID=775635

Font color problem

Newly downloaded numbers and now font does not go to anything but light purple in a spreadsheet. I tried to change it to black and it becomes white and you can't read anything. How do I fix this??

Have you tried quitting Numbers and restarting your Mac? That often clears up unexplained glitches.
SG

How to Include More Than One Font and Font Color Within a Fluid Grid Div Tag?

Using CSS code, I can make all the words within a fluid grid div tag the same font, font size, and font color, but how do I make a few of the words different?

You can style the basic text and heading selectors with CSS:
p { }
h1 { }
h2 { }
h3 { }
h4 { }
etc...
And you can make classes:
.red {color:red}
.highlight {background-color:yellow}
Then apply classes to your text or sections of it using the HTML properties panel.
<div>
 This is a default paragraph style.
 This is red.
 This is highlighted.
 Default style with red, highlighted text and normal text.
</div>
Incidentally, this will work in any layout.
How to Develop with CSS?
http://phrogz.net/css/HowToDevelopWithCSS.html
Nancy O.

Font Colors & Color Picker Problem

Why won't the color picker change my font color? It has worked for months and today it won't.
[Title Edited for clarity - Hunt]

Reset the tool. In v11 & v12 it is at the right of the Tool Options panel at the bottom - a down arrow next to four horizontal lines. In earlier versions at the left of the tool options at the top of the screen.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Font color issues in published output

I have just upgraded a couple of older Captivate projects to 5.5.
On some of the slides I have click boxes set to open URLs when clicked, and I have colored the text blue and underlined it so that it looks like a hyperlink.
When viewing the published content I've noticed that my hyperlink text is black, instead of blue.
Has anyone run into this issue before? I've searched the forums and couldn't easily find any references to this issue, although this is not the first time I've seen this problem with my courses.
Thanks in advance for any help!
Brian

Rod, thank you so much for the reply.
The blue is just your standard #0000FF blue, which should be safe with 8 bit quality, and the slides were set to 8 bit quality the last time they were published (and worked) in an older version Captivate. Kind of weird, right?
BUT, being the optimist that I am, I took your suggestion and tried setting one of the slides to 24 bit, and the blue is blue once again rather than black! Very bizarre, but faster than the work around I had found yesterday so I'm probably going to roll with it. I found that changing the slide quality to 24 bit has a minimal impact on the size of the published swf file, so I'm good.
Again, oddly enough, my work around mentioned above involves changing the default caption style to what Captivate calls "default caption capture style". With my caption style set as this my blue is blue, even with the slide quality set at 8 bit. I took one of my older courses and went through changing all of the caption styles. Took me a little while as changing the caption style changes the font, font color, font styles, font sizes, paragraph alignment settings, etc., etc.
And on a side track, I got to thinking after I noticed that changing the caption style seemed to fix the font color issue... My original project used a custom caption style, one that I had not yet "reinstalled" since upgrading to Captivate 5.5. So, I added the custom caption styles, even changed the name of the caption style and tried to reapply it, but no dice.
It seems that, with the slide quality set at 8 bit, if I use a caption style of "default caption style", my blue is black on publish. But, if I use a different caption style, such as "default capture caption style", my blue is blue, even at 8 bit quality.

Copying from Oracle SQL Developer to Microsoft Word doesn't retain formatting (Font,colors etc)

Copying from Oracle SQL Developer Worksheet doesn't retain formatting (font,color etc...)in Microsoft Word but copying from other programs such as
visual studio, chrome browser etc works fine. This doesn't work even after changed the setting to Keep Source formatting of Options-> Copy and Paste Settings

Hi,
I notice that you have cross posted in Answers forum and Oracle forum. Have you tried Mr. Peter's suggestion?
Then, I recommend we check the Word settings:
1. Go to: Options > Advanced > Cut, Copy and Paste
2. Make sure that Use smart cut and paste is ticked.
3. Click the Settings button next to this option
4. Make sure that Smart Style
Behavior is checked.
If the issue still exists, please upload a sample through One Drive, I want to test.
Regards,
George Zhao
TechNet Community Support

Unable to change font color in inserted textbox

Hi All,
Thanks for help. I have an aplication which brings up an image for editing in flash. Here is what happens.
I click on A tool and insert 2 text boxes on the image and type something. Then I click on the Arrow tool and double click on text in Text box 1 to select it. Then try to change the font color from the font menu icon. It does not work. But after selecting the text in text box 1 and trying to change the font size from the menu seems to work fine. Can any one plz help??

This seems to be a question for Flash Authorying. Can you post this in the forum of Flash CS?
Here's the link http://forums.adobe.com/community/flash

How to change font/ font color etc in a graphic object using JCombobox?

Hello
My program im writing recently is a small tiny application which can change fonts, font sizes, font colors and background color of the graphics object containing some strings. Im planning to use Jcomboboxes for all those 4 ideas in implementing those functions. Somehow it doesnt work! Any help would be grateful.
So currently what ive done so far is that: Im using two classes to implement the whole program. One class is the main class which contains the GUI with its components (Jcomboboxes etc..) and the other class is a class extending JPanel which does all the drawing. Therefore it contains a graphics object in that class which draws the string. However what i want it to do is using jcombobox which should contain alit of all fonts available/ font sizes/ colors etc. When i scroll through the lists and click the one item i want - the graphics object properties (font sizes/ color etc) should change as a result.
What ive gt so far is implemented the jcomboboxes in place. Problem is i cant get the font to change once selecting an item form it.
Another problem is that to set the color of font - i need to use it with a graphics object in the paintcomponent method. In this case i dnt want to create several diff paint.. method with different property settings (font/ size/ color)
Below is my code; perhaps you'll understand more looking at code.
public class main...
Color[] Colors = {Color.BLUE, Color.RED, Color.GREEN};
        ColorList = new JComboBox(Colors);
ColorList.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent ev) {
                 JComboBox cb = (JComboBox)ev.getSource();
                Color colorType = (Color)cb.getSelectedItem();
                drawingBoard.setBackground(colorType);
          });;1) providing the GUI is correctly implemented with components
2) Combobox stores the colors in an array
3) ActionListener should do following job: (but cant get it right - that is where my problem is)
- once selected the item (color/ font size etc... as i would have similar methods for each) i want, it should pass the item into the drawingboard class (JPanel) and then this class should do the job.
public class DrawingBoard extends JPanel {
       private String message;
       public DrawingBoard() {
              setBackground(Color.white);
              Font font = new Font("Serif", Font.PLAIN, fontSize);
              setFont(font);
              message = "";
       public void setMessage(String m) {
            message = m;
            repaint();
       public void paintComponent(Graphics g) {
              super.paintComponent(g);
              //setBackground(Color.RED);
              Graphics2D g2 = (Graphics2D) g;
              g2.setRenderingHint
              g2.drawString(message, 50, 50);
       public void settingFont(String font) {
            //not sure how to implement this?                          //Jcombobox should pass an item to this
                               //it should match against all known fonts in system then set that font to the graphics
      private void settingFontSize(Graphics g, int f) {
                     //same probelm with above..
      public void setBackgroundColor(Color c) {
           setBackground(c);
           repaint(); // still not sure if this done corretly.
      public void setFontColor(Color c) {
                //not sure how to do this part aswell.
               //i know a method " g.setColor(c)" exist but i need to use a graphics object - and to do that i need to pass it in (then it will cause some confusion in the main class (previous code)
       My problems have been highlighted in the comments of code above.
Any help will be much appreciated thanks!!!

It is the completely correct code
I hope that's what you need
Just put DrawingBoard into JFrame and run
Good luck!
public class DrawingBoard extends JPanel implements ActionListener{
     private String message = "message";
     private Font font = new Font("Serif", Font.PLAIN, 10);
     private Color color = Color.RED;
     private Color bg = Color.WHITE;
     private int size = 10;
     public DrawingBoard(){
          JComboBox cbFont = new JComboBox(GraphicsEnvironment.getLocalGraphicsEnvironment().getAvailableFontFamilyNames());
          cbFont.setActionCommand("font");
          JComboBox cbSize = new JComboBox(new Integer[]{new Integer(14), new Integer(13)});
          cbSize.setActionCommand("size");
          JComboBox cbColor = new JComboBox(new Color[]{Color.BLUE, Color.RED, Color.GREEN});
          cbColor.setActionCommand("color");
          JComboBox cbBG = new JComboBox(new Color[]{Color.BLUE, Color.RED, Color.GREEN});
          cbBG.setActionCommand("bg");
          add(cbFont);
          cbFont.addActionListener(this);
          add(cbSize);
          cbSize.addActionListener(this);
          add(cbColor);
          cbColor.addActionListener(this);
          add(cbBG);
          cbBG.addActionListener(this);
     public void setMessage(String m){
          message = m;
          repaint();
     protected void paintComponent(Graphics g){
          super.paintComponent(g);
          Graphics2D g2 = (Graphics2D)g;
          g2.setColor(bg);//set background color
          g2.fillRect(0,0, getWidth(), getHeight());
          g2.setColor(color);//set text color
          FontRenderContext frc = g2.getFontRenderContext();
          TextLayout tl = new TextLayout(message,font,frc);//set font and message
          AffineTransform at = new AffineTransform();
          at.setToTranslation(getWidth()/2-tl.getBounds().getWidth()/2,
                    getWidth()/2 + tl.getBounds().getHeight()/2);//set text at center of panel
          g2.fill(tl.getOutline(at));
     public void actionPerformed(ActionEvent e){
          JComboBox cb = (JComboBox)e.getSource();
          if (e.getActionCommand().equals("font")){
               font = new Font(cb.getSelectedItem().toString(), Font.PLAIN, size);
          }else if (e.getActionCommand().equals("size")){
               size = ((Integer)cb.getSelectedItem()).intValue();
          }else if (e.getActionCommand().equals("color")){
               color = (Color)cb.getSelectedItem();
          }else if (e.getActionCommand().equals("bg")){
               bg = (Color)cb.getSelectedItem();
          repaint();
}

font color=red Create/Modify forms and triggers through C++ using OPEN API


Dear brothers/sisters
 
Please help us to find the linking problem.
 
We have to add PRE-FORM trigger to many FMBies. We have thousants of FMBies. So opening one by one is difficult. For this we are using OPEN API and BORLAND C++. We have coppied all header files from D:\orant\FORMS60\API.
But there is a link error. Here is the snippet.
 

 #include <stdio.h>
 #include <stdlib.h>
 #include <malloc.h>
 #include <d2fctx.h> /* Forms API context */
 #include <d2ffmd.h> /* Form module header file */
 int main (int argc, char *argv[])
 {
 d2fctxa ctx_attr;
 d2fctx *ctx;
 d2ffmd *form;
 text *form_name;
 /* Check arguments */
 if ( argc != 2 )
 {
 fprintf(stderr, "USAGE: %s <filename>\n", argv[0]);
 exit(1);
 }
 /* Create Forms API context */
 ctx_attr.mask_d2fctxa = (ub4)0;
 if ( d2fctxcr_Create(&ctx, &ctx_attr) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error creating Forms API context\n");
 exit(1);
 }
 /* Load the form module into memory */
 if ( d2ffmdld_Load(ctx, &form, argv[1], FALSE) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Failed to load form module: %s\n", argv[1]);
 exit(1);
 }
 /* Get the name of the form module */
 if ( d2ffmdg_name(ctx, form, &form_name) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error getting the name of the form module\n");
 }
 else
 {
 /* Print the name of the form, then free it */
 printf ("The name of the form is %s\n", form_name);
 free(form_name);
 }
 /* Destroy the in-memory form */
 if ( d2ffmdde_Destroy(ctx, form) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error destroying form module\n");
 }
 /* Close the API and destroy context */
 d2fctxde_Destroy(ctx);
 return 0;
 }
 

 
The compilation is success. But there is a link error. Please help us to find the problem.
 
Here is the error Message.
 

 Borland C++ 5.5.1 for Win32 Copyright (c) 1993, 2000 Borland
 FIRST.CPP:
 Turbo Incremental Link 5.00 Copyright (c) 1997, 2000 Borland
 Error: Unresolved external '_d2fctxcr_Create' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdld_Load' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdgt_GetTextProp' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2fctxde_Destroy' referenced from D:\API\FIRST.OBJ
 
Could you please help us....... 


Dear brothers/sisters
 
Please help us to find the linking problem.
 
We have to add PRE-FORM trigger to many FMBies. We have thousants of FMBies. So opening one by one is difficult. For this we are using OPEN API and BORLAND C++. We have coppied all header files from D:\orant\FORMS60\API.
But there is a link error. Here is the snippet.
 

 #include <stdio.h>
 #include <stdlib.h>
 #include <malloc.h>
 #include <d2fctx.h> /* Forms API context */
 #include <d2ffmd.h> /* Form module header file */
 int main (int argc, char *argv[])
 {
 d2fctxa ctx_attr;
 d2fctx *ctx;
 d2ffmd *form;
 text *form_name;
 /* Check arguments */
 if ( argc != 2 )
 {
 fprintf(stderr, "USAGE: %s <filename>\n", argv[0]);
 exit(1);
 }
 /* Create Forms API context */
 ctx_attr.mask_d2fctxa = (ub4)0;
 if ( d2fctxcr_Create(&ctx, &ctx_attr) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error creating Forms API context\n");
 exit(1);
 }
 /* Load the form module into memory */
 if ( d2ffmdld_Load(ctx, &form, argv[1], FALSE) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Failed to load form module: %s\n", argv[1]);
 exit(1);
 }
 /* Get the name of the form module */
 if ( d2ffmdg_name(ctx, form, &form_name) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error getting the name of the form module\n");
 }
 else
 {
 /* Print the name of the form, then free it */
 printf ("The name of the form is %s\n", form_name);
 free(form_name);
 }
 /* Destroy the in-memory form */
 if ( d2ffmdde_Destroy(ctx, form) != D2FS_SUCCESS )
 {
 fprintf(stderr, "Error destroying form module\n");
 }
 /* Close the API and destroy context */
 d2fctxde_Destroy(ctx);
 return 0;
 }
 

 
The compilation is success. But there is a link error. Please help us to find the problem.
 
Here is the error Message.
 

 Borland C++ 5.5.1 for Win32 Copyright (c) 1993, 2000 Borland
 FIRST.CPP:
 Turbo Incremental Link 5.00 Copyright (c) 1997, 2000 Borland
 Error: Unresolved external '_d2fctxcr_Create' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdld_Load' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2ffmdgt_GetTextProp' referenced from D:\API\FIRST.OBJ
 Error: Unresolved external '_d2fctxde_Destroy' referenced from D:\API\FIRST.OBJ
 
Could you please help us.......

Change font color in the Text Field of a Popup Key LOV

Hello,
I have a question concerning Popup Key LOV.
I want to change the font color in the Text Field of the Popup Key LOV Item.
I searched the forum but I cannot find an answer about this! Although I searched the CSS and the Popup Key LOV Template, but I do not know where to modify the font color.
Has anyone an idea how to solve that problem?
Regards,
Tim

Hey,
thank for your reply!
I use style="color:#000000;" and it work in Firefox, but not in Internet Explorer 7.0!
And that is not the first time, that there are differences in displaying those tags in the HTML Form Element Attributes and in css files, etc.
Does anybody know I to solve that?
Thank you,
Tim

In Earthlink WebMail when inserting an email address or weblink, the text no longer turns blue and underlines, and I can't change font colors. IE Works.

Whenever I try to insert an email address or a link to a website, I no longer get the automatic hyperlink (turning blue and underlining). Also if I try to change the font color on some text it either doesn't change from black or it changes to a different color. (If I try to change to red, I get dark green; change to a bright green, I get dark red; change to blue or yellow, I get black).
I tried removing and reinstalling Firefox to no avail. Earthlink is clueless.
This all works properly using Internet Explorer.

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change?

Lightroom 4 color problem

I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develope setting is set to "none" , the box is unchecked "apply auto tone adjustments". I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color. What could the issue be?

monitor NEC 2690 wuxi
eye-one display 2
Original message
From: twenty_one
To: [email protected]
Received: 2/10/2013 12:30:42 PM
Subject: lightroom 4 color problem
Re: lightroom 4 color problem
created by twenty_one in Photoshop Lightroom - View the full discussion
Yes, that certainly looks like a problem with the Lightroom rendering. Skin tones and red in general is clearly off, while Windows Photo Viewer looks good.
I'm almost certain this is a problem with the monitor profile. As troubleshooting, try to set sRGB as monitor profile (or Adobe RGB if your monitor is wide gamut), and see if the difference persists. But try to recalibrate first.
What calibrator and what monitor?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5062403#5062403
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5062403#5062403
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5062403#5062403. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Font color problems in one forum

Similar Messages

Maybe you are looking for