Font default in a template?

I don't suppose there is a way to change the font default in a template or even site specific? I mean globally instead of having to choose every single line and changing the font.
Thanks

The short answer is No, you can't globally change the font from within iWeb itself.
A longer answer is that you can do this if you're prepared to dig into the inner workings of the iWeb application and edit some of its files. Be warned, though — this isn't something for the faint-hearted. Have a look at the instructions at the 11 Mystics web site, where Suzanne Boben documents what's involved. Your journey begins here:
http://web.mac.com/sboben/iWeb/11Mystics/iWeb%20Templates.html
[ Visit here for iWeb Tips, Tricks and Hacks ]

Similar Messages

Illustrator CC 2014 Font defaulting

Running Mac OS X Yosemite 10.10.2
Illustrator CC 2014, Suitecase Fusion 6 (fonts loaded on computer)
I build business cards and reproduce them.
Event - Open Illustrator document copy everything (type and graphics)
Paste into another Illustrator document (same version of Illustrator) and the type defaults to Myriad Pro (default font)
This is inconsistent, happens maybe twice a week (handling about 200 files a week) but is costly.
Example
Open document A copy all content.
paste into document B (blank template for many up) Font can be fine.
open document C paste into document B (template again) and fonts can default to Myriad Pro
open document D paste into document B (template again) and font can be fine again.
This problem is difficult to reproduce because it is so infrequent.
Are there any extensions I can turn off, preferences I should trash, Reinstall?
I've read several posts starting with CS5.5 up to last fall (2014) but I haven't read any fixes yet.
Any suggestions would help. Thank You.

Jacob Bugge, thank you for your suggesting of changing the default font, but I couldn't get it to work.
I thought I followed the directions to the T, I tried several times with different fonts (all system fonts) but it didn't take.
Of course I must have missed something.
But… I was able to recreate this problem in case this is effecting anyone else.
I have two documents open - Document A (business card) and Document B (template)
I copy the items from document A
Paste into document B
if I close document A without saving (by clicking on the "X") while I am still in document B (still having the pasted contents selected) - the font defaults to Myriad Pro.
If I click (command Z) it reverts back to the original pasted font. (this is how I get around this problem - I hope I catch all of them)
This still doesn't happen in all situations but when it does happen I am able to recreate the problem with the same file.
This is strange, because - I didn't do anything to document B except paste the information into it. So when I "undo" it should remove the pasted information. This tells me it is actually preforming an action like "change fonts to default".
I'm thinking this could be any number of things - Fonts, Server, or even a corrupted Illustrator download (most likely fonts because it isn't happening to all files I use. I will try to track the font usage to see if that is it)
I hope people can follow this explanation and it helps find a solution to this strange problem.

Comments Font default change

How do I set or change the font default so when I open a comment, the font is the one I want? Yes, I can change each comment individually, but I want them all to be the same of my choice when I start.
Thanks.

Hello
Here is a workaround using brute force.
Open a blank document.
Save is as is.
control-click its icon
Show Bundle's contents.
You will get:
Contents
QuickLook
document-thumbnail.tiff
index.xml.gz
Double click on "index.xml.gz"
It will expand as "Index.xml"
Open this xml file.
I do that with "TextWrangler" but you may do the same with TextEdit.
Search for this block:
<sf:paragraphstyle sfa:ID="SFWPParagraphStyle-85" sf:ident="kSFTErrorWarningParagraphStyleID" sf:parent-ident="paragraph-style-default">
<sf:property-map>
<sf:fontSize>
<sf:number sfa:number="11" sfa:type="f"/>
</sf:fontSize>
<sf:fontColor/>
<sf:fontName>
<sf:string sfa:string="Lucida Grande"/>
</sf:fontName>
<sf:listStyle>
<sf:liststyle-ref sfa:IDREF="SFWPListStyle-2"/>
</sf:listStyle>
<sf:alignment/>
<sf:keepLinesTogether>
<sf:number sfa:number="1" sfa:type="c"/>
</sf:keepLinesTogether>
</sf:property-map>
</sf:paragraphstyle>
Replace "Lucida Grande" by "Palatino-Roman" for instance.
Search for:
<sf:paragraphstyle sfa:ID="SFWPParagraphStyle-86" sf:ident="kSFTCellCommentParagraphStyleID" sf:parent-ident="paragraph-style-default">
<sf:property-map>
<sf:fontSize>
<sf:number sfa:number="11" sfa:type="f"/>
</sf:fontSize>
<sf:fontColor/>
<sf:fontName>
<sf:string sfa:string="Lucida Grande"/>
</sf:fontName>
<sf:listStyle>
<sf:liststyle-ref sfa:IDREF="SFWPListStyle-1"/>
</sf:listStyle>
<sf:alignment/>
<sf:keepLinesTogether>
<sf:number sfa:number="1" sfa:type="c"/>
</sf:keepLinesTogether>
</sf:property-map>
</sf:paragraphstyle>
Replace again "Lucida Grande" by "Palatino-Roman"
Save the file.
Delete the "Index.xml.gz" file.
Open the doc
Save it as a template
When you will use this template to create a new document, the comments will not be using Lucida Grande but Palatino-Roman.
Of course you may choose an other font but take care to get its exact internal name.
Yvan KOENIG (from FRANCE jeudi 27 mars 2008 21:28:26)

Setting a New Default "Output To" Template in the Render Que Does Not Work

I'm trying to change the default "Output To" template in the Render Que to not show the timecode for a PSD file, but when I change the default template by clicking on "Custom" from the dropdown menu and using the checkbox to set a preset as the default in the "File Name and Location Template", nothing changes. The next PSD item I add to the render que still uses the previous template (i.e. it adds the Frame) and doesn't honor the new default I just set.
Just submitted a bug report, as well.
Using AE 2014.1.1 (13.1.1.3)
Windows 8.1 Pro

I'm not surprised either of you is having problems creating a new output module and making it the default. That's not where you do it.
Go to Edit>Templates>Output Module. Make a new one. Select one to use as a default. Select a different one if you want a different default. You can have a default for both stills and movies. You can do the same thing for Render Settings. It's the same basic drill.
Since this is basic AE 101-type stuff, I bet you'd get a lot out of these how-to's from the pros:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

Default a rtf template for a Xml publisher report!

Hello,
How to default a layout template if multiple templates are registered for a Data template?
and also how to delete a template?
Thanks,

Thank you all for the reply. I was talking about Xml publisher with EBS.
As said...we can not delete the template but we can end date it and we can set the default template from the system administration responsibility.
One more question regarding this : When we migrate the xml publisher seed data for this report( which include template which was endated) to other instance ( let say Development to Test)....we are unable to see the template in the test instance. All i meant was can we migrate the template which is end dated to other instance with the data definition??

Where can i see default look report template

Hi All,
Iam using Default look 5 report template. but it is not showing in edit page. If i select other tahn default look ,it is showing in edit page.
but i need change column heading color and etc ...... for default Look 5
Any One knows pls ...tell me
Thanks in Advance

"Default look" report templates are hard-wired into the APEX engine and cannot be modified. You could look at the HTML source of a rendered report to figure out any classes etc used and try to come up with CSS to override the default appearance, but the best approach would be to use the rendered source in conjunction with Firefox+Firebug to figure out how the report is structured and styled and build a custom report template based on this.

Fonts default to 50 point when applying a paragraph style

I have run into this several times. When updating an InDesign file from an older version (now using CS5) when I apply a paragraph style the font defaults to 50 point no matter the style settings. Is there some way to avoid this. Currently I'm copying and pasting the graphics into a new file and having to reset the text. If I copy any of the old text over it causes the same problem.
Most of our text is copied and pasted from Microsoft Word (old version and new text edits), however, the text that was already in the document and the new text both do the same thing when a style is applied.
CS5
Win 7 Pro 64bit

My original "body" style isn't base on any style and the other styles are based on "body" but none of them (including Basic Paragraph), have 50 as the size.
I had it wrong in my original question, it's not 50 point size, it's 30 point with 50 point leading, bold, and Myriad Pro (which is my body font) that everything converts to no matter which style I choose. My basic paragraph style is Times New Roman 12/14. Body font that everything is based on is Myriad Pro, regular, 10/14.

Fonts default when file is viewed in 8 but ok in 9

I have a file where the fonts view properly within Acrobat 9 Pro, but the same fonts default to box shapes when viewed in Acrobat 8 Pro. Anybody experience this before? The preflight report comes back clean, no font issues are uncovered.

Hi Dave,
I just completed a test and comparison between the two PDF's,
compared the file as you suggested with the floating option and changing setting to actual size of the original premier pro / mp4 file size and
the old pdf that did not utilize the floating and file size option.
I do notice a slight difference. The PDF with the floating window with the match of the media clips original dimensions appears to be crisper.
I will be having the final pdf document set utilizing this method for the embeded mp4 movie and hope that the department doing this (next stage of this job) will agree that this is better to use your steps to embed all the video files into a pdf.
Thanks so much for your time.
Hope you had a happy holiday, and hope you have a very happy and healthy new year.
Thanks, Amy

How do I set font default in aperture?

how do I set font default in aperture?

how do I set font default in aperture?
Do you want to change the size of the fonts or the shape for the fonts in the user interface or in the products (books, webpages)?
Aperture does not allow to change the fonts used in the graphical user interface, neither the size nor the shape. To change the fonts for the products (books, etc.), pick a theme with the fonts you like.
Regards
Léonie

Default options in templates?

Is it possible to make defaults in a template?
I normally change the page width to 900px using the inspector but it is a pain having to do this for every page.
Is it possible to set defaults so that every time I add a new page my settings are included?
Cheers, Jack

No. Send a feature request to http://www.apple.com/feedback/iweb.html. You can, however, create a second site, add a one of each page layout and set each to the defaults you want. Then when a new page is needed duplicate the layout type you want, drag up to the working site, and change the theme as needed. The width and length will remain as set previously.
OT

Is it possible to deploy a default Custom Layout template?

I was asked if we could deploy a Default Custom Layout template for Adobe Profiles . So that when creating Firm Portfolios they are standardized? It would be nice if it were defaulted and they didn’t have to choose the Layout.
Thanks in advance for any info
Ed

Hi Chris,
Looking through the BPEL client API, I think it might be possible to change the process state via java code. I say might, because the documentation is not that splendid. The IBPELProcessHandle interface has a method updateMetaData which allows you to change the state, among other things. I have not tried this yet so the solution a little theoretical.Sorry for that :-\
Then, when you have your java class working, you can create an Ant task for it and invoke your Ant task in the build.xml, right after the deployment target.
Kind regards,
Harm

By default new document/templates start with above, How I change to be Strict 1.0 XHTML ?

by default new document/templates start with above, How I change to be Strict 1.0 XHTML ?
Tell me for Dw MX2004 & CS4 ?
If I start with Transitional 1.0 XHTML and want to change to Strict 1.0 XHTML the only way is modify code or make a new doc ?

Using CS4, there are a few ways to do it:
1. when creating a new document - you can select the doc type preference.
2. In your preferences, you can set up which document type will be opened when you select a new document.
3. If you start with one doctype and want to convert it to another use:

Horizontal Menu Widget Bug - Font Defaults

I am having a maddening problem with the fonts in the Horizontal Menu Widget. It is getting to the point that I am thinking of just creating buttons in Photoshop and be done with it.
The main issue is font defaults - especially in the active state.
I dragged an instance of the horizontal menu onto the master page.
The top-level page names appeared in the buttons.
I clicked the home button, changed the font to Helvetica 18pt. It updated the font for ALL states in the states viewer.
I changed the background colours for the various states to fit the colour scheme of the site.
All seemed to be good UNTIL I previewed the site in the browser. The active button state had defaulted to Georgia 14pt. The other states were all Helvetica 18pt
I went back in, and selected the Active state of the home button, and specifically changed the font to what I wanted.
Again, when previewing in browser or the Preview pane in Muse, the Active state was Georgia 14pt.
I went back in, deselected "Edit Together", changed each button's active state to Helvetica one by one.
Again, previewing in Browser finds GEORGIA.
What is going on?
In About Adobe Muse it says:
v2.0, Build 945 CL 770253
AIR Runtime 3.4.0.2540

Hi,
I can reproduce the issue. But here's a workaround:
1. Insert Horizontal menu
2. Select the Home menu item
3. Switch to active state
4. Reset to default (click the trash can icon). You will lose the active state fill color (#999999), but you reapply it
5. Select the label inside the Home menu item
6. Switch to active state (if you aren't already in active state)
7. Reset to default (click the trash can icon).
Now you can format as desired (Helvetica 18pt). Let me know if that works.
Abhishek

Font used when I give new Font("Default",....

Hi,
When I create a font using new Font("Default",..
which font will be actually used?
In jdk1.4 the created font shows family=sansserif and font=Default in string representation.
But in jdk1.4.2 the created font shows family=Default and font=Default in string representation.
Both these fonts have entirely different behaviours.
In my application "Default" font is used at many files and I don't want to change this in all places, when I port my appilcation to 1.4.2
Any body know, from where I can set the font to be taken for "Default".
I couldn't find any thing in font.properties.
Please help....
Regards,
Jojo

public Font(String name, int style, int size)Creates a new Font from the specified name, style and point size.
Parameters:
name - the font name. This can be a logical font name or a font face name. A logical name must be either: Dialog, DialogInput, Monospaced, Serif, or SansSerif. If name is null, the name of the new Font is set to the name "Default".
So, you're following none of the Font creation specifications, and just putting "Default" into name parameter directly. Not surprising it doesn't work as expected.
I'd say either replace all your "Default" font name parameters with a
null and let the Font() constructor properly setup it's own
"Default" font, or replace them all with the logical font name that
you actually want - "SanSerif"

Unable to Preview barcode font fields in Word Template Builder PDF Preview

I have searched for solutions to this problem but did not find anything that I have not tried. I have IDAutomation Barcode fonts installed and am using the Word template builder v10.1.3.4 Build 129. My Templates work fine in EBS, but I cannot Preview in a PDF, any fields that are formatted with my barcode or MICR fonts. I have created an xdo.cfg file as per the documentation and placed it in C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config. I can successfully preview in an RTF, but not a PDF. Any suggestions?
Here is my xdo.cfg file:
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
 
 <properties>
 
 
 <property name="system-temp-dir">E:\Temp</property>
 
 <property name="pdf-compression">true</property>
 
 <property name="pdf-security">false</property>
 <property name="pdf-open-password">user</property>
 <property name="pdf-permissions-password">owner</property>
 <property name="pdf-no-printing">true</property>
 <property name="pdf-no-changing-the-document">true</property>
 </properties>

 <fonts>
 
 
 <truetype path="C:\WINDOWS\Fonts\WINGDING.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\GnuMICR.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39L.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39M.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39S.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39XL.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39XS.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39XXL.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39L.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39M.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39S.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39XL.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39XS.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39XXL.ttf" />
 
 </fonts>
</config>
Thank for any assistance.
Regards,
Donn

The fonts settings did not show up properly. Here is an example inside comments:
 



The font family, name, and path have been checked thoroughly.
Thanks,
Donn

Font default in a template?

Similar Messages

Maybe you are looking for